I am using a 3G usb stick for broadband connectivity. It works fine with windows. I have spoken to the technical support but they are unable to help me regarding its installation on Fedora 13. I have seen it work on Debian platform. The drivers are available on their website but i am having difficulty in installing them and make it work.
Below is the link for drivers download;
[URL]
I have the latest version of Ubuntu installed on my Dell INSPIRON laptop with dual booting. while wi-fi activation has been done on the window OS, i need to set up wi-fi on Ubuntu as well as set the broadband connectivity with my service provider. Can someone give me detailed information how to achieve. Please note i am the first time user of Linux and is not familier with intricasies of Linux.
View 1 Replies View RelatedI 've problem with this usb stick to connect to Internet. I desperately tried for 6 long hours but could not resolve it! I almost tried every possible / meaningful solution but none worked! My system detects the modem but it says NO CARRIER !
Code:
chinmaya@chinmaya:~$ sudo wvdial
--> WvDial: Internet dialer version 1.61
--> Initializing modem.
--> Sending: ATZ
[Code]...
Has anybody managed to get this stick to work with Suse 11.4 ? I have read the following thread :[URL]..which shows that it can work with Gentoo, but I am afraid that I am not competent enough to understand this. The stick is showing up in my hardware manager as a comunications device on /udev/ttyUSB0 but it is not being recognised as a networking device anywhere. I have also attempted to write a rules.d file for it, ( 15-zte-mf180.rules) and have saved this under /etc/udev/rules.d/ and also under /lib/udev/rules.d/ but again I am unsure if I have a). written the correct file, and b) pointed to it in the correct ways.
View 1 Replies View RelatedI have a Hauwei K3765 Mobile Broadband stick and would like to use it on my Ubuntu 9.10 operating system.I've tried downloading the vodafone-mobile-connect_2.15.01-2_all.deb package, but I recive the following error message:- /tmp/vodafone-mobile-connect_2.15.01-2_all.deb could not be opened, because the associated helper application does not exist. Change the association in your preferences.Does anyone know what this means and how I could install the package?
View 4 Replies View RelatedHave anybody succeded in using Nokia CS-19 Mobile broadband USB stick with ubuntu 10.10?
It is not reconized as a 3G adapter.
Nokia states that it was compatible with ubuntu 10.04 on their site:[url]
Anyone know how I get this working
My PC crashed and I replaced Windows XP with Ubuntu. My laptop is still on Windows. Haven't been able to connect to the internet on my PC, Linux IT guy told me there was an issue with drivers on Ubuntu. Was told the Ubuntu community would know how to fix this. I've been reading through the posts and found a similar sort of problem posted with a solution posted also. The solution it seemed, lay in the Sakis website. I went to the Sakis website and downloaded Sakis3G onto my memory stick via my laptop. I need to get internet connectivity on my PC. My friend advised me to put the stick into the PC and then to open the terminal and type the following commands: gunzip sakis3g.g2 > chmod+xsakis3g > /sakis3g --interactive. Each command on a new line however after typing the first line: gunzip sakis3g.g2, I got 'No such file or directory'.
View 9 Replies View RelatedI have an acer 532h aspire one, running ubuntu 10.04.
Basically, I bought a Telstra Turbo USB broadband stick and I've been having a bit of hell getting it to work. First I couldn't get the computer to recognize it had been plugged in at all. I downloaded the modeswitch packages to no avail. I tried a few other terminal tweaks but they didn't change anything either. I left the card in and restarted the netbook and it finally recognized the wireless card. I was able to surf the internet for an hour or so a couple times. But after stowing the computer away for a couple hours and turning it on again, I found that this work around was no longer effective. So now I'm back to the blue light never blinking and I have to tether my phone and pay ridiculous data charges because I'm in the middle of nowhere.
I'm really new at troubleshooting things that don't work right out of the box.
It's a telstra turbo prepaid wireless broadband. The stick isn't even recognized as removable media.
lsusb returns this:
Also this might be relevant:
Should this mobile broadband stick work? It's not showing in Network Manager.
[Code]....
I have a Huawei E122 Mobile Broadband HSPA USB Stick on three ireland. i can't get it to connect. but i think the problem might be, when i stick it in nothing happens. it doesn't show up under lsusb. i don't think it "mounts"
View 2 Replies View RelatedWife's laptop has AR5001 Wireless Adapter laptop model is Toshiba Satellite A215
Problem : Wireless networking randomly loses connectivity and can not regain connectivity, the only apparent solution is a full power down , this is not even certain to work. The card works under Windows, she hates Windows. (I love her for this) I know it's not faulty hardware , because it will work for days on end under Windows without problems.
Things I've tried : madwifi drivers (any and all versions available) : These increase stability of the signal and seem to delay the inevitable however it still happens. When using these drivers the only option is to unload them modprobe -r then reboot then remove them again and re add them. It makes no sense why this works, and if I don't remove them prior to rebooting it will not work.
ATH5K drivers : These are pretty much junk, results are unpredictable at best, sometimes it will work perfectly for a few hours, sometimes it will not work at all. Nothing is repeatable, I can't seem to force whatever condition is causing this. rfkill does not show the wifi being blocked (hard or soft), unblocking it anyway does nothing, only way to make this work and it's iffy is to fully power down wait 5-10 minutes turn it back on and it MAY decide to work.
Firmware update : Updated the Toshiba BIOS to the latest version of the firmware 2.0 no joy here either. Same issue both sets of drivers.
Tried different distros and kernels : I've tried Mint 9, 10 ,11 ; Ubuntu 10.10, 10.04 , 9.10 and 11.04 (which is currently installed) , Fedora and OpenSUSE. All are giving the same problems. I have also tried a slew of different kernels no joy from any of them (I'm not at the computer with the issue now I will post exactly what kernel versions I've used when I have access to the machine).
Another useful bit of information, the hard switch to disable/enable wifi WILL disable it but turning it back on does absolutely nothing. The hotkey does nothing at all. The bios does not have an option to disable or enable the wireless card.
I will also post the typical lsmod , lspci , iwconfig all that good stuff when I get back to the computer in question. I'm probably just going to buy a PC card for it and give up on that one, but this is driving me insane and I would really like to see it resolved even if I do replace the hardware.
i was writing a .img file to my usb stick with ImageWriter, but it didn't seem to do anything so i clicked the close gtk button and pulled the stick out of my pc. now my pc gives my an when i try to open the stick. is there any way to fix this. I can use win xp pro, win xp media center, win 7 starter, ubuntu 9.10 and ubuntu 10.04
View 5 Replies View RelatedI'm about to ditch Freenas as my NAS software and make it an Ubuntu server box. The mainboard is an Asus AT3ION-T dual core Atom board. Freenas runs happily from USB stick. I have no optical device to install Ubuntu from and would like to install Ubuntu Server to a USB stick.
View 8 Replies View RelatedWhen I start bluej and try to open files from my memory stick the memory stick is not available. Is there any way that I can open files directly in bluej from my memory stick.
View 3 Replies View RelatedI just installed a linksys router for the computers in my house. All the MS windows computers work but the linux computer that I use does not work.
View 2 Replies View RelatedHow can i check my FTP is working properly or not? or check out this connectivity?
View 2 Replies View RelatedTried to re-install Fedora 11 since I haven't been able to get my network connectivity up for some reason. But during the boot process it got into a comand prompt complaining about some boot record problem and the need to create a soft link to /etc/root.
View 3 Replies View RelatedI have had problems with the Firefox flash plugin being fully connected to certain web sites:Draft Client Test Connection - NFL.com - Free Fantasy FootballYahoo! Sports Fantasy FootballDraft Compatibility Test - Free Fantasy Football - ESPNI use a wired/wireless router which when bypassed solves the problem. I was able to use the router successfully in Fedora 13 by adding a DNS address to the eth0 device with the Network Manager IPV4 settings.[SOLVED] Flash and Fantasy sports - FedoraForum.orgI'm not sure how to accomplish this with openSUSE 11.3
View 3 Replies View RelatedI would like to share my internet connectivity on eth0 with another computer on eth1.
+-----------+ +-----------+ +-----------+
| | | | | |
|ADSL Router|-------------| Computer |-------------|NFS Client |
| | eth0| |eth1 | |
| | dhcp| |static | |
+-----------+ +-----------+ +-----------+
How can i maintain this network topology and allow internet connectivity with dns across my main computer?
I use a laptop with a built-in WiFi card (Intel PRO/Wireless 3945ABG [Golan] using iwl3945 module). It's OK but sometimes is not very stable, occasionaly it simply dies and I have to reboot. It was even worse but I improved it by applying a new driver.I also have a very nice USB WiFi card (D-Link System DWA-140 802.11n Adapter [ralink rt2870]). It's much better and faster.
So the problem is that in Ubuntu 9.10 (2.6.31) I can use only the built-in one. The other one (D-Link) also works but I can't make it connect to my router. The built-in card connects to it but the D-Link even does not list it among possible connections (but it lists other possible connections which I do not want to use).The funny bit is that this problem disappears when I use an old Kernel (2.6.28-18 ) : both cards work fine and can connect to the router at the same time (obtaining different ip's). I then disable the built-in one and happily use the external card.
Unfortunately the old Kernel has issues with sound and video, so I would like to use the latest Kernel with the external card. I tried WICD but it didn't change anything.I can add that under the old Kernel the USB card is used as a ra0 device while the new Kernel lists it as wlan1.
I have an issue with my Dlink DWA 547 802.11n PCI adapter, I'm under LUCID fully updated.I have no trouble connecting to any wireless but after a few minutes I'm loosing the connectivity strenght (getting ping reply from my router that vary from 2ms to 200ms). But as soon as I'm rescanning the network using the command (sudo iwlist wlan0 scan) everything is fine (constant 1-2ms ping). I'm using wicd as network manager. I have tried to schedule a job in crontab to launch every 10min a network scan command, but didn't succeed to have it working, morehover I don't think that's the good way.
View 2 Replies View RelatedI have an older Gateway with model number: 4024GZ, and I just installed Ubuntu on it and I am not able to connect to my home's wireless network. I am assuming that this is because of a driver issue, whether there is none or the old driver isn't compatible. So is there a website that I can go to to maybe find a driver that will work with both my wireless card and ubuntu? My wirless network adapter is internal and is a Broadcomm I believe. (btw I am a beginner here and if I have posted this in the wrong section,
View 6 Replies View RelatedI am using both win 7 and ubuntu using grub. If I connect to internet in ubuntu its working fine
but if I connect to net using win 7 internet is not working. However if I connect internet in ubuntu and restart win 7 without switching off router I can access net in win7 even if I switch off router and start again its working fine. But when I shut down system and router and switch on in win7 its not connection.
I don't have any idea where to place the "mysql-connector-java-3.1.14-bin.jar" file in ubuntu 9.10. Yesterday I did this in xp successfully by placing this jar file at following locations
Javajre1.6.0_06lib
Javajre1.6.0_06libext
Moreover, the jar file which I am using for xp; can be used for ubuntu 9.10 or not. I am using NetbeansIDE 6.7.1 (installed from Software Center), MySQL 5 Server (sudo apt-get install mysql-server) is this enough?
The goal: ipv6 connectivity using 6to4 The problem: no connectivity on some internal hosts (mixed win & debian) and no ipv6-web access on any host. Let's start with my external box. It is headless debian lenny dhcp/local-dns & cache/firewall. It has the following interfaces after a reboot:
[Code]...
My understanding is that ipv6 will auto-configure itself and that the radvd file is all that is needed by the external host to give all the ipv6 enabled internal hosts ipv6 web access. My question: How is my external host misconfigured? Or are the problems specific to the internal hosts? I am assuming that I have issues on both the external and internal hosts since some of the internals have golobal ipv6 address and some don't. I do however wish to address the external host first.
I am installing fc12 in a datacenter that does not yet support fc12. I have fc12 successfully running on several other machines in a different unmanaged datacenter. Here is my problem. After booting the machine I run a data transfer intensive operation. I use scp to transfer a 1GB file. After some percentage, 10 to 30, the network appears to go away. No ping, ssh, traceroute, etc are successful (in or out). At the KVM console I can check the status of the network service, it indicates its up. Restarting network, turning off iptables, ifdown/ifup do not have any effect. Only a system reboot will temporarily allow network connectionifconfig show LOTS of RX errors and dropped packets.
View 1 Replies View RelatedMachine 1) I have a Server with RHEL5.
eth0 = 192.168.48.x (static class C ip connected to VLAN switch)
Internet available via HTTP proxy through vlan but from other main server but not from machine below.
Machine 2) I also have a Server with RHEL4.
eth0 = 124.30.XXX.xxx (public IP for availing internet)
eth1 = 192.168.60.xxx (class c ip to share internet via squid on the same LAB)
eth2 = 192.168.16.xxx (class c ip connected to VLAN switch)
Now what I want is ssh connectivity available to Machine 1, so as to enable remote machines on the internet connected. I know that it might be hard for Machine 1 to share ssh directly on the internet but if there is any kind of tool or tricks to setup pls tell. So the only chance is ssh via machine 2 then after connected to Machine 2 then again ssh to Machine 1. But how do I make ssh available online? IPtables are set correctly machine 2 can't be ping on the internet.
I am working on a project to build an embedded board with WIFI connectivity. My present status:
- I have a embedded development board TS7200 .
- It has USB and Ethernet Port.
- I am able to get port Linux on it and run program to communicate between devices and a computer using socket programming and Ethernet.
I need help in deciding how to get WIFI connectivity to the board. I guess it would mostly be using WIFI dongle? Any suggestion for a WIFI dongle?How should I get it working? Where should I look for proper reading material? I am am planning to do some basic program practice using WIFI on my laptop. How can I do that ?
I read that "ATDT*99#" is used to create a GPRS connection through a GSM/GPRS modem how exactly this AT command works.
View 4 Replies View RelatedMy reinstalled OS Linux Lite ( version 1.0.9.E) connects fine with cable but Broadband BT hub does not support the protocol for wireless.Is there a Linux download which will solve this?
View 7 Replies View Related