Software :: Save An Image Of Windows Results In Partimage Freezing At The "NTFS Information"
Aug 13, 2009
I have a dual-boot windows and Suse linux 11.1 setup. I can save and restore a linux image. Trying to save an image of Windows results in Partimage freezing at the "NTFS Information" window before the "save partition to image file." I have two SystemRescue CDs of versions 1.2.2 and 1.2.3 I have two computers one with Windows 2000 and one with Windows XP I have defragmented the partitions several times over. Users are told that use with "NTFS is experimantal". Several up-beat webpage tutorials also mention this but go on to say how marvellous it works for them. Naturally, such sites do not mention problems. This is the province of the forums. I have found nothing that relates to my problem though. Hence my post appealing for any guidance on offer.
View 7 Replies
ADVERTISEMENT
Sep 26, 2010
I just created a NTFS image file using the following steps:
After this i want to access the contents of this image file in windows. How to do that ?
View 4 Replies
View Related
Aug 6, 2010
Am quite new to Ubuntu (10.04) and have recently reinstalled XP. I want to make an image of my windows partition to save time and effort when wanting to restore this. I read the Ubuntu documentation on Drive Imaging [URL]..community/DriveImaging and am wondering if I've done things ok?
I've booted using the Live CD. Windows is on sda1 and is a 50GB partition. I have a hidden ntfs partition on the same hard drive at sda9 of 10GB. The first time I tried this I got an error regarding my output file saying "Not a directory". I'm assuming that was because I hadn't mounted sda9. It also reported an error saying permission denied on sda1. I then mounted sda9
Code:
sudo mount /dev/sda9 /mnt
I then changed to root as I thought not being in that was why I was getting the permissions error.
Code:
sudo -s
I've then done the following;
Code:
dd if=/dev/sda1 bs=1024 | gzip > /mnt/sda1.bin.gz
The terminal window is just showing a flashing cursor in the bottom left corner under the above command line input. Is the fact that my mount partition being smaller than my windows partition going to cause a problem or will gzip solve that? My Windows install occupies about 7.5GB of the 50GB partion.
I'm not sure if dd is just taking a long time to complete the task???
View 9 Replies
View Related
Nov 26, 2010
This question may be silly and super easy for linux connaisseurs, but I was just wondering, for instance, I want to use the >find command to search for a file and send the results to a text file
View 5 Replies
View Related
Nov 2, 2010
I am trying to store the results of my code to a separate text file.But the problem is, as my results comes from a loop, my text file shows only the last result, not all of them.Like if the loop runs 5 time the text file shows the result for the 5th step.But i need to store all of them (1 to 5).Can I use awk to print the output field and store to another file and creat a new line so that the next output field goes to a new line?(just an idea, dont know).
#!/bin/basth
for (( i=1; i<=5; i++))
do
./file.exe > output.txt
done
View 2 Replies
View Related
Mar 9, 2011
All routing settings made with the ip tool (route command) are lost when the redhat server reboots.How to save routing information to a configuration file?
View 2 Replies
View Related
Apr 5, 2010
I have some japanese music files stored on a flash drive that the titles of which are in japanese originally. While in the flash drive, when I go to Properties -> Audio, the title is written in japanese. It does not allow me to edit the file, no matter what permissions I have on it, therefore I can't change the name to english. So, I tried Rhythmbox instead, and transfered the file there. I could change the name, however there is STILL a huge problem.
I have around 300 japanese music files, all of which have to be renamed into english.
I did all this for all of them in Rhythmbox, and clicked "quit" when I was done. When I came back to transfer the files to my MP3 player like usual, I opened Rhythmbox, and...
ALL OF THE FILES WERE STILL IN JAPANESE! It didn't save any of the work I did on editing them. But, I calmed down and thought "oh, you can save playlists! I am sure that if I save them on one, it will keep the edits!" I did this, and it saved nothing. It took me 2 hours to finish the renaming, just to find out that it can't save information edits at all.
View 9 Replies
View Related
Mar 20, 2010
I'm trying to set up my router, with tomato firmware, to save the bandwidth usage information. One of the 'save history' choices is "CIFS" ... I'm lost as to how to create this save area..anyone able to give me a link to a 'how to' ...or if you've done it, perhaps a step by step?
View 1 Replies
View Related
Jul 2, 2010
I'm having problems with Kstars and would like to know the proper place to post questions or if there is a forum just for the Kstars program. I can't find much info on the net. If I remember right it worked in Ubuntu 8 but I've upgraded to the latest and some options in Kstars are not working now. In a nutshell, some of the problems are:
1: Help not working. I get....Could not Launch the KDE help center: Could not find service 'khelpcenter'
2: In telescope wizard, there is no list of telescopes.
3: I cant save my telescope information under properties.
As I'm just learning this stuff, it could be a bug but not sure, so please point me in the right direction for help. I'm running dual boot on a HP laptop. Windows XP and Ubuntu. I have reformatted the drive and installed everything new for a clean slate.
View 2 Replies
View Related
Dec 20, 2010
I am trying to fill out this PDF form:
http://www.math.washington.edu/Grads...mentalform.pdf
In Document Viewer, I can click on the fields and type in them, but after spending about 2 hours writing descriptions of courses, I saved it and... it closed the document I was working on, and loading the document I saved resulted in empty fields that could no longer be edited at all - clicking on them did nothing - it looked like a blank form, except it was also broken.
Is there any way I can actually fill in this form...
View 4 Replies
View Related
Jun 9, 2010
How do I save it as a jpg somewhere on my puter using a script? I can wget, but it gets saved as a .evif, which is totally useless. I can right-click on the image in a browser and use the context menu to save it as a jpg, but I want this process automated. How can I DL this image and save it as a jpg? GIMP's CL options don't include the capacity to save/convert this image, though it's possible from teh GUI. ImageMagick won't read this dynamic URL. What do I do?
View 3 Replies
View Related
Dec 26, 2010
I'm working with Clonezilla to back up my test server, I want to store the image to a partition in our network, for example: my computer. But it still doesn't work. These are my steps:
I reboot my server with Clonezilla CD.
I choose device-image
I choose ssh_server
I choose my network device with dhcp mode
I provide the IP of my computer and port 22, then my username
I choose the path to my hard drive, like /home/username/backup
But after I type my password to connect, Clonezilla says "remote host has disconnected. Clonezilla image home directory /home/partimag is not a mountint point! Failed to mount other device as /home/partimag! Are you sure you want to continue?"
I try to connect to my computer from another machine, it works, but I don't know why Clonezilla can't.
View 4 Replies
View Related
Oct 25, 2010
we have a Win NT4 system used for an important application used at two places. At one place it has gone bad. I want to create an image from good system and restore it at the second location. Is it possible to do this using "clonwzilla live cd"? Does it harm the good system? Can I save the created image to an USB drive?
View 3 Replies
View Related
Feb 5, 2010
I try to mount an image from a NTFS partition. Below is not working.
sudo mount /windows/D/img/XPLANE9.mdf /media/XPLANE9/ -t iso9660 -o ro,loop=/dev/loop0
View 2 Replies
View Related
Apr 28, 2011
Can save an image from clipboard into file using command line?
may be image magic?
View 3 Replies
View Related
Jun 2, 2010
I have compiled the same program and I get different results when the program is run in windows and in ubuntu, in windows I run it with Dev C++. I was wondering if someone could provide insight on this. My expected result is the one that Windows gives. However, I would really like to work in Ubuntu.
View 3 Replies
View Related
May 31, 2011
i need to mount at least for read access NTFS-based partition image on linux from a file. File is binary copy of a partition. Is there any libraries or resources for this?
View 1 Replies
View Related
Jun 14, 2010
I am trying to recover some important data from a 273 gig NTFS partition that was used in windows 7. The laptop was dropped and would not boot the next day. As an external drive I could see 2 smaller partitions (30 gig and 500 meg), but the main partition was RAW and requesting to be formatted... so I came to learn about Knoppix 6.2.1 as my live boot cd and ran ddrescue to recover an almost complete image of the bad partitionddrescue -n /dev/sdc1 /media/sda1/image.img /media/sda1/logfile.logI then ran it one more time:ddrescue -r 1 /dev/sdc1 /media/sda1/image.img /media/sda1/logfile.logthe image was made with 741 errors (amounting to 160 megabytes)So Now I have my partition as image.img which I want to mount.
First I tried
sudo mount -t ntfs -o loop /media/sda1/image.img /mnt/recovered
sudo mount -t ntfs -o loop,force /media/sda1/image.img /mnt/recovered
[code]....
View 1 Replies
View Related
Mar 19, 2011
Wanted to image my mom computer. Her computer is windows 7 and has ntfs. So... how do I mount it?
Below is what I did.
Code:
View 3 Replies
View Related
Jan 23, 2011
I have ubuntu 10.04.1 and a H.P.psc 1311 all-in-one printer scanner.Printer works ok but when trying to scan,with xsane,it goes through the scanning process and an image of the document comes up on the screen.
When I try to save this image to desktop or file/folder whatever I get the message; "Child Process Error. Failed to execute OCR command:GOCR:no such file or directory."
View 3 Replies
View Related
Mar 10, 2011
Just have installed 11.4 on an EVGA X58 I7 LGA1366 platform, 6 GB of RAM, with twin EVGA/NVidia GEForce GTS 250 SLI cards. X11 is configured for the desktop spread across all 4 monitors. I added the NVidia repo, downloaded the NVidia drivers and desktop widget. I am running the default kernel. The NVidia items showing installed via YAST are the nvidia gfx02 kmp desktop graphics driver kernel module for GEForce6xx and newer GPU's, the Nvidia G02 graphics driver for the same version card and the x11-xorg-driver-video-nouveau accelerated opensource driver for NVidia cards.
Graphics performance is horrible-- moving windows results in jittery motion, starting new programs requires a lot of time, sometimes windows leave "trails" and blur when they are moved..... and whenever anything is moved I see (via GKrellm) CPU usage go way up. I am guessing this is to service the graphics. So I am not satisfied that I have the correct driver installed for the video cards. Additionally I question that the noveaux accelerated open source driver is there as well--I would assume that was part of the install package.
From the NVidia page, using their tools to insure the correct driver is selected, I downloaded NVidia Linux-X86_64-260.19.44.run. I do not find this same driver designation (minus the .run) on any of the repo listed drivers in YAST. I assume that to manually compile the driver I downloaded its going to be configure-make-make-install or something similar. I do have (in prep for this) gcc, make and the kernel.src installed. Question is should I uninstall the existing drivers and NVidia packages before trying to build and install the NVidia package that I downloaded directly from their site?
View 3 Replies
View Related
Jan 28, 2011
On a previous thread, I explained how I installed Fedora 14 from the live image disk onto a HP 2140 netbook only to find I was missing the development files. Stoat helped me use the more complete install DVD from Fedora 14 to install the development tools (rather than doing a complete reinstall -- which I would do if it made this work).
Unfortunately, I'm still unable to make PartImage 0.6.9 install. When I try, configure says that the bzip2 library (libbz2) is not found or too old. Apparently, this is because it can't get it to respond to BX2_bzopen from within the library. I think because it can't find the library. Inside the config.log file it seems to indicate that from an -lbz2 not found. Now I'm guessing that there is some trick to this, maybe some way of setting the library path to include the location of this and possibly other libraries under Fedora 14. I've checked the library's location and it seems to be in /lib as far as I can tell and bz2 does work, so it's somewhere. Of course it's possible since PartImage is pre-version 1 but doesn't have much if any activity on its forum that something has changed position in Fedora and the install isn't looking for it in the right place.
I've seen one blurb in the PartImage files that indicates that maybe using env to set environment variables on entrance to configure might work, but I'm not sure what variable to set or how to make it find the bz2 library. Note that I've been a UNIX user and administrator in the past, but that was in the System 7 days so that's rusty and I have no prior experience with LINUX of any kind.
View 4 Replies
View Related
Feb 28, 2010
Been trying for a few days now to get a workable image from partimage. I've been using Physocats tutorial as my basis, however there is one item that seem odd: after the fdisk -l, a mkdir /backup is created; then the mount of hda5 where the backup will reside. To me, this seems backwards.
In any respect, what I'm trying to accomplish is to backup my main drive (sda1) to another (sdc1). After coming from Ghost and Windows, I've forgotten much of my limited command line knowledge. This mounting,unmount, fstab and mtab has me ready to go back to pen and paper!!
View 2 Replies
View Related
Sep 9, 2010
Used the ubuntu software center to download partimage-doc, then tried to find it with the search function using the word part. Three files showed up in one section but not partimage-doc. How do I find it? I want to read about the program to decide whether to download it.
I'm new to LQ and wonder what is the best way to find this post after the suggested 24 hour wait? Been using linux for most of this year and am enjoying it very much. Will dump windows completely as soon as it is possible to watch Netflix movies and read Barnes an Nobel books with linux.
View 3 Replies
View Related
Nov 28, 2010
I just installed the ubuntu 10.10 as a dual boot with windows xp. I have a problem of the computer getting stuck, freezing so the mouse nor the keyboard respond. This usually happens when I open multiple tabs on mozilla Firefox...
View 5 Replies
View Related
Aug 27, 2010
I thought I'll be smart, and installed squeeze on ext4 partitions ( boot-ext2, root-ext4, home-ext4 and swap). With my Lenny (ext3), I use partimage to backup the / partition, and rsync to backup my /home files. Now, I found out that partimage does not work with ext4. Are there other GNU packages I can use to backup my / partition?
View 2 Replies
View Related
Nov 18, 2010
I have a 16gb flash drive with system rescue cd installed, I boot to it and run partimage. I'm trying to image an NTFS HDD. I would like to save it to the empty space on the flash drive but I'm unable to locate it in the file manager.
It's not under /dev/sdb1 or /livemnt/boot. The entire flash drive has been partitioned to be used by sysrescueCD.
View 1 Replies
View Related
Jan 20, 2010
This is happening pretty often. when in ubuntu, usually while i'm browsing the web, my browser will go dim then a box will come up saying something along the lines of missing resources. the thing is, all my desktop icons will then turn to red x's and no text characters on any further boxes will show. when i restart it says grub error and takes one more restart to finally come on. i got fed up with it and switched over to windows 7 where my browser also froze and my computer froze up.
View 9 Replies
View Related
May 2, 2011
I have changed my Compiz profile to enable the cube in unity and I'm worried about using anything beyond the basic cube. I have not found any information about using 3d windows or other cube effects , so I was wondering if anyone was doing this with Unity ?
I use the cube as mainly a workspace switcher but it would be nice to know how to enable the other effects without breakage , a guide would be nice and I realize Unity in 11.04 is new so it may take time before a guide/ work arounds will be posted.
View 9 Replies
View Related
Jan 4, 2011
my first impressions are that for all the dissing of Windows at least if I stick a CD in the tray it plays....I installed ubuntu 9.04 on a VM running alongside WindowXP and upgraded to 9.10. When I open rhythmbox and put a CD in the tray nothing happens..despite the book saying it will play automatically....after much googling I cannot find anything on this problem..most people are trying to stop autoplay. There is not even a cdrom option in the sidepanel of Rhythmbox. I have installed ubuntu-restricted-extras as advised...nada.
A chat room reply suggested abandon rhythmbox and install vlc which I did...same problem though at least i get an error message "unable to open MRL cdda://dev/sr0". As a complete newbie I do not know what to put int he command line to run rhythmbox or vlc to see the complete error log. I have spent two days trying to resolve this problem...the equivalent of several months worth of hanging/freezing on windows
View 2 Replies
View Related
