I have a number of old albums listed in the menu for flphoto that I no longer need.The help manual for flphoto doesn't say anything about how to remove these old albums from the menu.Does anyone have any idea of how to remove them? I have looked for a directory for flphoto but couldn't find one. Thought I could delete them from the file if I could find it.
View 2 RepliesWhen i try to connect to my web albums in picasa 3 it doesn't connect. it says something about checking my internet connection but it's fine. any one else having this?
View 4 Replies View RelatedWhat I am trying to do: I have a lot of 2 or 3 CD compilation sets. I like to re do the track numbers to 101/102/103/104 etc for CD1, 201/202/203 etc for CD2, 301/302/303/etc for CD3. I then give them all the same album name. This then means I can listen to all 3 CDs on a journey non stop with out having to take my MP3 player out my coat to change it. Otherwise my MP3 player sees each CD as a different album and I can't que albums up on it - or if I just rename the album to the same on all 3 in the tags it plays track 1 from cd 1, then track 1 from cd 2, and so on. In MP3tag I would just select the tracks, go to the auto numbering wizard, and tell it to start at 101 (or 201 or 301 depending on the CD number).
View 6 Replies View RelatedI have been organizing some of my photos and as a KDE user I have installed Digikam. The installation works fine, but when I load Digikam it does not show all of the photo albums in /home/darren/pictures and those albums that it does list have no photos in them. Also my requirements are fairly limited I use GIMP to do any editing. But need to be able upload to Picasa.
View 5 Replies View RelatedI've installed mediatomb (latest version) on Gentoo Linux and am streaming my music to a Denon wifi dock. Works a treat except that when I put iTunes .m4a files into the database they are all inserted into an "/unknown" folder without the album name being displayed. If I change the properties of the "unknown" folder and change the name, then all future additions to the library go into that folder.I can work around this by exporting the files as .mp3 but that seems to be a rather cumbersome way of doing it. Ideally I'd like to be able to just put my iTunes library on a network share that is used for the MediaTomb database.
View 2 Replies View RelatedI am running Fedora 14 and I installed Picasa from the rpm provided on Google's website. Of course, there was an error when I launched it. This was due to the wine-preloader binary that is provided by Picasa being too old. I replaced it with my brand new one and Picasa started running. The problem is that I cannot log into Web Albums because it tells me that Picasa cannot reach the server or whatever. Error message:
Code:
Login failed
Please check that you are connected to the internet, and that your internet connection is working properly.
If this problem persists and you contact support, please provide the following error code:
HttpOpenRequest failed (121570 -
https:///www.google.con/accounts/ClientAuth [13]
Is there a wine internet module that exists, and if so, can I replace it with the one provided by Picasa, wherever it is ?
Running openSuSE 11.1 and Digikam 1.1.0 under KDE 4.4.1 with most recent updates as of today. I started digikam and all settings are still in place and database file exists same as always. All subcollections in the albums show zero pictures. Opening file manager shows all contents exists.
View 9 Replies View Relatedwhat happened to the Create Web Album functionality in gThumb 2.11 series? Is it no longer supported or am I missing an extension or something? Is there another software I can use that allwos me to do the same?
View 4 Replies View RelatedI've been through the forums, and can't seem to find the answers. Thanks to EVERYONE who has posted fuppes related advice though, you've filled my last 3 days with so much fun! I'm a complete newbie with linux. I had a half hearted fiddle about 6 years ago, but nothing since. But I've decided I want rid of the horror that is Windows, and stumbled upon Ubuntu. Installled it last week. First priority, videos and music to the XBox (can't lose Microsoft!). I'm using Ubuntu 9.10.
So, after much, much, much reinstalling and playing with config files, I now have Fuppes streaming to my XBox. I can stream both audio and video, and I'm even happy with the folder structure in the Video section too! (Eventually! ).
1) When rebuilding the database, I get:
Code:
TagLib: MPEG::Header::parse() -- Invalid sample rate.
TagLib: MPEG::Header::parse() -- Invalid sample rate.
TagLib: MPEG::Properties::read() -- Page headers were invalid.
Segmentation fault
The line before is repeated lots and lots of times before it gives up. However, it still seems to have created the database, because all I then have to do is start Fuppes up and rebuild the folder structure and it works.
2) I spent ages trawling through the forums to get this far, and I did get music sorted by artist, album, etc. However, when sorted by album, each album shows lots of times. Is there a way to stop this? I only want each album to show once. Seems to mainly affect compilation albums with multiple artists.
For anyone who hasn't got as far as me, persist! You'll get there eventually. I'll attach my fuppes.cfg and vfolder.cfg. I am using version 0.660, and used a mixture of advice from all the tutorials to get here. Use this guide:[URL] but later on in that guide in someone's reply, there's a link to the new version.
I also had to install some additional packages (this was guess work...using Synaptic Package Manager), to ensure that during the ./configure, the Taglib and mpeg4ip/mp4v2 are both enabled, otherwise you have no hope of your XBox sorting your music. if you edit your config files in the fuppes directory, open a terminal and run the following to put them in the place fuppes actually looks for them!:
Code:
sudo cp fuppes/fuppes.cfg .fuppes
sudo cp fuppes/vfolder.cfg .fuppes
[code]....
Normally in my music collection, I have some songs that are the same song, just in a different album. When transferring files onto my MP3 player, if it detects the same name for the song, even though they are on different albums, it says that I have to either replace the file, retry, or cancel.
View 8 Replies View RelatedI've been playing with Ubuntu for a few years, and it runs great on said notebook, so I' m starting to ween myself from Windows.Biggest consideration for switch is music. I currently have an iPod touch 16. Been using itunes for a long time.I'm not married to the device or the software, and will rebuild my music library if needed (it's a pig of a mess anyway).I'm curious which mp3 device you are using and what linux software you are using it with for great results. I want a high end player iwth 16+ gig, and a music manager to keep a 10000+ file library organized. I frequently want to change the mix of albums on my device. I'm fine with buying music elsewhere from Apple. Prefer it actually - Amazon is a good choice.Should I keep hte iPod? Trade it for a Zune or something else? Sound quality is very important to me. As is wireless access/browsing, storage space, battery life, etc
View 2 Replies View RelatedI've been experiencing an odd issue since I upgraded my main desktop to Lucid - namely, that the first track on several albums doesn't appear in the Rhythmbox library. The rest of the album will show up and play just fine. I installed Exaile to see if it was just a Rhythmbox bug, and the tracks appear in the library, but will not play (it just skips through the whole track, as it would if the MP3 codec isn't installed or configured correctly). Did a clean install of Lucid yesterday, which was also of no help.
The files are all .mp3, non-VBR encoding (320kbps, IIRC...not that it should really matter). They are stored in an NTFS partition I use to share data between Windows XP and my Linux installs.
Funny thing is, the tracks show up and play just fine in XP and on OpenSuse 11.3 (KDE version). It also works fine on my laptop, which is also dual-booting XP and Lucid, with the tunes stored on the Windows partition.
I know a bunch of commands and I am comfortable using the terminal, I even set a powerpc server but I can't figure out how to remove epiphany on this new computer I'm setting up. I didn't install anything with tasksel. I installed gnome and xorg afterwards... I load it up and 'startx' just fine. then I check around for the programs that were installed. I lik'em gimp, lot's of utilities. gedit. anyway I find epiphany, which I have already established that I dislike, I immediately go to the root terminal (another nice program that comes with gnome) and type apt-get remove epiphany-browser-data the output says it will be deleting gnome... however I have researched and found these are simpy meta packages that don't really matter.... however under the section that states all the packages that will be removed by autoremove there is a huge list... I doubt these packages are safe to remove. how to remove epiphany without removing a huge amount of probably needed software
View 14 Replies View Relatedwhat i did was, remove evolution mail from synaptic, what i wanted to do was just remove the indicator applet from the task bar. i read a bunch of bad stuff about removing evolution from synaptic vs just removing the applet.
im worried. did i break anything or put my security at risk. after, i used a command (older) (sudo apt-get install ubuntu-desktop)to install ubuntu desktop. because i thought that it would fix evolution. then i went to synaptic and installed a package called evolution. i rechecked evolution in applications menu. however, i notice that i have both a checkable evolution and two evolution icons. nothing 'seems' broken. im not sure if it ever was. and evolution calender pops up as normal, as does the the installed plain evolution. they both seems to be an exact copy of the other.
all i really wanted to do was remove the indicator applet. did i make a serious mistake. since ive had ubuntu, ive reformatted a lot because i was worried i made a mistake of some kind. however now im into the more "make a mistake and fix it stage' as im pretty happy with my current desktop and have worked hard to customize it. the command, sudo apt-get remove indicator-messages removed the mail icon. i still am worried that i broke something, or put my security at risk. also, now i have two mail icons. evolution mail and calendar, and another just called evolution.
These should be my last pleas for help with regard to Fedora 13. I've been unable to turn off the notifications that appear in the top right corner, despite a decent amount of searching on google. I can't remove any notifications package without removing a bunch of important software along with it. Also, F13 refuses to "Safely Remove" either of my external disks. I have to yank out the usb cord, touching wood each time.
View 5 Replies View Relatedi installed the PAE kernel and was wondering if it's safe (and how) to remove the non-PAE kernels. from the system.This is F13.
View 2 Replies View Relatedcomplete removal of wine from ver 9.04
View 1 Replies View RelatedI'm using an old laptop with a PC-Card bay and a cardbus WiFi adapter. If I remove the WiFi adapter to insert something else in the bay, Lubuntu locks up solid--even the mouse refuses to move. I assume I'm going about this wrong...is there a proper way to remove the adapter that won't crash the system?
View 4 Replies View RelatedI would like to upgrade my current hp printer driver 3.10.9 to the latest version 3.11.1 According to 'Google' the command to remove the driver is sudo apt-get remove hplip but when I type this in terminal I get:liz@lizubuntu:~$ sudo apt-get remove hplipReading package lists... DoneBuilding dependency treeReading state information... DonePackage hplip is not installed, so not removed0 upgraded, 0 newly installed, 0 to remove and 12 not upgraded.
I installed 3.10.9 as per the Launchpad website - it looks like Ubuntu is not 'seeing' hplip although it is installed and working. I guess I need a more subtle command to get rid of all the hp driver files. Or could I just install 3.11.1 over the top? (Would have thought best to remove 3.10.9 first).
i am wanting to make some play along tracks out of some of my favorite songs and was wondering if there is a way to remove the drums from the track.
i understand you can remove the vocals fairly easily so i was wondering if theres a way to do the same with the drums or other instruments.
I'd like to strip out all of the metadata, everything. Sometimes the photos have been in and out of different computers or passed around from friends, and I don't want any info left, including the archive bit.
View 1 Replies View RelatedIn my efforts to try and find a working screencaster, a fellow Ubuntu mate helped me out by giving me some commands to get "Kazam Screencaster." I used the commands but it didn't work, and now when I:
Code:
sudo apt-get update
It gives me the error:
Code:
W: Failed to fetch http://ppa.launchpad.net/and471/kazam-daily-stable/ubuntu/dists/natty/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/and471/kazam-daily-stable/ubuntu/dists/natty/main/binary-i386/Packages 404 Not Found
E: Some index files failed to download. They have been ignored, or old ones used instead. How do I remove the kazam-daily-stable from my respiratory?
I have installed Toad via wine on ubuntu 10.04, now i want to remove toad from my laptop can you please tell how i can remove toad.
View 1 Replies View RelatedIf I wanted to update Apache manually, instead of having Yum update it, how would I remove apache from Yum's database? What else would be involved if I download Apache source; and then configured, built, and installed it?
View 2 Replies View RelatedIf I have these lines...
How can I remove the (X) part from the end of all those? For example, when I cat the file which contains those, I just want to see those lines without the (X)...
removing A automatically causes apt-get to want to install B when removing a bucnh of gnome stuff for example....The following extra packages will be installed:
libxfce4util-common libxfce4util4 libxfcegui4-4 libxfconf-0-2 xfce-keyboard-shortcuts xfconf xfwm4
wtf? is it time to go back to aptitude already?
I recently switched over to Debian Squeeze and now that I'm over the transition shock I'm starting to enjoy it a lot more than I thought I would. One little thing that is very irritating, though not show-stopping, is the fact that I cannot change the default media player in GNOME.Totem I just can't stand it for some reason and I would like to just remove it. So I whip out my'apt-get remove totem' only to see that Totem is tied to a number of GNOME components that I want to keep. Now why a media player is so intertwined with GNOME I have no idea, at least that would be appropriate to express here.Normally to change my default media player I right click on a media file, open with, remember this app for this type of file, and then I'm done. I also tried using the 'Preferred Applications' option under the 'System --> Preferences' menu with no success.
As I said this problem isn't a show-stopper but it is blankety-blankin' annoying. Any thoughts on how to resolve this would be appreciated. I have spent some time searching online but to no avail. Although I no absolutely nothing about software development I can only hope that this is a bug and that the GNOME developers didn't actually intend this. If it were intentional it would seem analogous to Windows 7 in that there is no way to remove IE from the system. Oh but you can disable it and hide it from the menu. . .
I hate desktop icons and shortcuts. I don't ever need them, and they look wasteful and cluttery sitting there unused. Since everything is accessible from the menus, I would like to not have any icons on my desktop in Fedora 11. I have been playing around with the settings for days and can't find a way to make them disappear.
View 6 Replies View RelatedI have just done a upgrade. And I get the message below. I am not sure that I don't have enough on my boot partition to install the new kernel.When I try and upgrade I get this message: There are unfinished transactions remaining. You might consider running yum-complete-transaction first to finish them.
View 1 Replies View RelatedI have three questions regarding software updates 1. Is there a why to remove or uninstall several updates simultaneously?2. Is there a way to remove or unistall updates withouth knowing their package names?3. Is there a list or log showing which updatesave been applied?
View 5 Replies View Related