I was having some problems with a "memory exhausted" error, I have come to find out that my kernel is not built for largefiles. What options in my .config do I need to have enabled for Large File Support? I diff'd my current .config and Slackware's huge config, because I found out the huge kernel could handle ~3G files, but did not see anything that looked related to largefiles.
my grub2 start-up has every kernel for ubuntu since 9.10 in the list. can i safely delete these older kernels without screwing something up? also, where do they live?
I have Kubuntu 10.10 and Back Track 4 (BT4) Linux installed on my system. I think BT4 is based on Ubuntu 8.10.
I have the following line for my kernel boot options in /etc/default/grub file.
Code:
I need the rootdelay option for the Kubuntu 10.10 kernel but the BT4 kernel does not need it. But looks like setting this has a global effect and it waits for 80 (seconds ?) even when starting the BT4 kernel which is not required.
So is there a way to give the rootdelay option only to the Kubuntu 10.10 kernel and not to the BT4 kernel.
The problem I'm facing is that I can't use my headphone. Sound works, but not the headphone. See my ealier thread. It was suggested to edit the module options, but I don't quite know which buttons to push.
I'm just wondering what the options are if one wants to try a 'newer' kernel and/or XServer version.
Either on an installed system or virtual machine (for e.g., Squeeze in VirtualBox).
On an installed system, on Debian Sqeeze (or Testing), if one wants to upgrade to 2.6.36 kernel and/or XServer 1.9, what are the options? I noticed that 1.9 is available in experimental so one has to enable and load the experimental package repository?
As for the kernel, I guess there's a few options? One includes installing the liquorix kernel? Best choice/alternative is compiling?
I want to compile a kernel to add a few options that are not enabled in the huge-smp-2.6.29.6 that comes with slackware. specifically, i want to add TASK_DELAY_ACCT and TASK_IO_ACCOUNTING so that I can use iotop. I just want to add those 2 options to the new kernel, everything else I'd like to keep the way it is as the system has been running just fine. Will running 'make menuconfig' in /usr/src/linux default to the options that are used in the stock kernel?
I am looking to compile a kernel for my system which is a home built machine. This machine is stable and has not had any hardware changes in the past 2 years. I am trying to figure out exactly what modules and options to include in my custom kernel. Is there a way to see what modules are actually in use on my system and build a custom kernel based on that?
I have an issue that is fixed by changing the lpfc driver to run using MSI interrupts. This is done by adding "options lpfc lpfc_use_msi=2" /etc/modprobe.conf.local file.
Is there a way to make this change using kernel boot parameters?
I'm having trouble getting PPTP to work on my Gentoo system. Kernel options relating to PPTP:
Code: CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=y CONFIG_PPP_DEFLATE=y CONFIG_PPP_BSDCOMP=y code....
I've tried emerging with and without the mppe-mppc flag on ppp, as well as putting the PPP options from the kernel to modules. No luck.
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
i'm using this guide videos - howto: debian linux kernel compilation, part 1 and the author says i need kernel 2.6.26 this version of kernel doesnt longer exist in kernel.org website and the only 2.6.26 i found is a patch here. should i use the patch? or download another version of kernel?
My laptop has only 2GB of RAM so I don't think I need the PAE kernel, also there are some drivers that I want to install, they were built for non-PAE kernel.
So far I read that I have to change the :
/etc/sysconfig/kernel --------- # UPDATEDEFAULT specifies if new-kernel-pkg should make # new kernels the default UPDATEDEFAULT=yes
I am having a system with NFS SERVER's and NFS client's. In my system, NFS Client transfer data when NFS server crash or network crash. NFS SERVER wait more than 10 minutes (I don't know real waiting time).My question is how to control that waiting time ?. can i set that time is 5 minutes. then NFS server will wait for 5 minutes after NFS server crash.after 5 minutes NFS client will give a error message ( to APPLICATION)
I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
my problem is on installing nvidia driver on fc12 32bit but, first of all, as i understood the pae kernel requires more than 4gb of ram,i have a 2.2 ghz cpu with 2 gb ram,but when i run command:uname -r it answers: 2.6.31.5-127.PAE [i have fc12 32 bit] when we try to download linux we have a 32bit edition or 64bit edition,do we have an edition which is only for pae? or when we install for example the 32bit edition on a computer with more than 4gb of ram then the kernel automatically will change to be a pae kernel??
I'm just installed OpenSuse 11.3 (64) on a 30gb SSD, hoping to get virtualbox 4.0 running to virtualize an instance of Windows 7.I went through some pain with my Nvidia video card and actually getting vb to install, but through lots of searching and tinkering got here.I created a vm in the vb control panel, but when I go to start it I get:
Code: Failed to open a session for the virtual machine Win7Main. The virtual machine 'Win7Main' has terminated unexpectedly during startup with exit code 1.
I am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD 2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
As a follow-on to something Telemachos said in another post:
Quote:
Originally Posted by Telemachos
You can see what kernels you have installed - to check if you have a virtual kernel and to clean up - by running this command:
Code:
If you've been installing kernel-headers along with the kernels (say to build modules for graphics or wireless), you should remove those when you remove the corresponding kernel. The command to search for those is parallel:
Code:
I would have thought that removing a given kernel package would trigger the removal of the older kernel headers. Can someone confirm that is, or is not, the behavior? I ask this because it seemed to me that the older kernel header packages were indeed removed when I removed some older kernel packages.
For example, the linux kernels I have installed are:
Code:
Also, the linux-headers packages I have installed are:
Code:
So, when I get around to removing the linux-image-2.6.25-2-amd64 package like this:
Code:
I would expect apt-get to automatically also remove linux-headers-2.6.25-2-amd64 and linux-headers-2.6.25-2-common. Is that what will happen, or do I need to explicitly state all three packages on the apt-get remove command?
The 486 kernel works just fine, and while I have only 1GB of RAM at the moment I hope to have 2GB someday and would like to take advantage of the dual core CPU, so I would like to configure grub to run the 686 kernel by default. For whatever reason, it runs the 486 right now and the 686 fails in a major way: there is no network connectivity at all. It could be plugged into my cable modem router and it shows no wired connections. The fact that one works and the other doesn't puzzles me since I haven't touched either since the install and a few rounds of upgrades.
I should mention I'm newbie but getting better; I managed to install debian on this x60, yet while preserving the factory install rescue & recovery partition and preserving the factory install MBR so that ibm-specific hardware functions (thinkvantage button, etc.) still work. This required me to use dd to copy the first 512 bytes of my debian partition to a file in the windows partition, etc., and modifying the windows bootloader. (I wish I had learned dd long ago--it rocks). I did this because if I ever resell the X60, the fact is most people use MS Windows and having that partition adds a perception of value to some potential buyers; not to mention I paid $ for it (I was young & stupid) so why should I delete it. I also backed up the recovery partition on another drive using dd over NFS in case the hd ever heads south.
Anyway, I've never been comfy with messing with the kernel. I did once recompile a module for ALSA because it had a bug in it for an old Yamaha integrated sound card on an old PIII and the newer version worked [alsa fails on this x60 too but I think I found a post on here that has a solution I will try later]. But I'm clueless as to networking modules, not to mention the correct module is installed already from Intel for this chipset. So what is there to do?
Here's a clue: the ifconfig output is radically different from the 686 and 486 kernels. Looks like hardware is not being detected since eth0 fails to show:
I would show the diff output below if it weren't so long--and not allowed--upon 2 text files, the first holding the output of modprobe -l under the 486 kernel and the second under the 686 kernel.
I'm attempting to install the driver for my atheros AR8131 PCI-E Gigabit Ethernet adapter (in my Lenovo laptop) on my newly installed RHEL5 system (it's not currently being recognized).
I tried using: 'make install' but hit an error "Makefile:61: *** Linux kernel source not found."
After this, I tried: 'sudo yum install kernel-devel kernel-headers'
To rectify this, but hit this error "No package kernel-devel available" (and the same for the headers). What should I do?
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
I'm I seeing this wrong or is the initrd file in kernel-2.6.27.25-170.2.72.fc10.x86_64 a zero byte file and that's why I can't boot with it( get this "kernel panic not syncing VFS unable to mount root fs on known -block (0,0)" message)
Trying to install virtualbox in F12 but fails when recompiling kernel module. Output of vbox-install log is:
Attempting to install using DKMS removing old DKMS module vboxdrv version 3.1.6 Deleting module version: 3.1.6 completely from the DKMS tree. Creating symlink /var/lib/dkms/vboxdrv/3.1.6/source -> /usr/src/vboxdrv-3.1.6
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.32.11-99.fc12.i686.PAE cannot be found at /lib/modules/2.6.32.11-99.fc12.i686.PAE/build or /lib/modules/2.6.32.11-99.fc12. code....
i want to compile the vanilla kernel 2.6.37-rc3, but i want to obtain a .rpm file. I found this guide long time ago (i used it many times) but it use src.rpm package and the contained kernel.spec file have many lines for adding patches. Someone know where can i download a kernel.spec for vanilla kernel or a guide to obtain an rpm file
I get the following error message trying to install dazuko on xubuntu 10.04: "headers for target kernel version could not be found" But when I run sudo apt-get install linux-headers-$(uname -r), I get the message that I already installed the headers. My current kernel is 2.6.34-020634-generic
How can I install dazuko withouth having this problem??
I'm trying to run extract-ikconfig because I've mistakenly deleted an old kernel config that I'd like to recover. However, when running the script from the latest (2.6.32.5) tree I run into this error:
Quote:
ERROR: Unable to extract kernel configuration information.
This kernel image may not have the config info.
Coincidentally, this happens with all of my kernel images. Is it a fixable problem? I should really set CONFIG_IKCONFIG_PROC next time..