Red Hat :: Configure Nginx Under RHEL 5
Sep 3, 2010I just want to try using NGINX as reverse proxy for POP3 and IMAP. Does anyone know how to configure it ?
View 7 Replies
ADVERTISEMENT
Server :: Configure Nginx As Replacement For Pound?
Jul 24, 2011As Pound is broken under Fedora 15, which I'm running on my Linux server, I decided to try out nginx and move the Pound configuration to something in nginx which does the same.However, the nginx configuration is a lot more complex than in Pound. What I try to do:
- nginx will listen on port 80
- requests for www.mydomain.nl => Domino HTTP server (on different server)
- if this server is not reachable, go to another Domino HTTP server
[code]....
Software :: Install Nginx, Download The Nginx-0.5.35.tar.gz And Extracted?
Mar 16, 2011I had a task to install nginx,i download the nginx-0.5.35.tar.gz and i extracted.I got following error when i ran these commands ./configure ----with-http_gzip_static_module & ./configure --with-http_geoip_module
[root@localhost nginx-0.5.35]# ./configure --with-http_gzip_static_module
./configure: error: invalid option "--with-http_gzip_static_module"
[root@localhost nginx-0.5.35]#
[code]....
Red Hat :: Configure LVM In My RHEL 5?
Oct 16, 2010Can I configure LVM in my RHEL 5 after I installed linux ? I have heared that it is only possible in GUI installation of Linux.
View 3 Replies View RelatedHardware :: Configure RHEL-5 For USB Connection?
Feb 15, 2010Can anybody suggest me how to configure my RHEL-5 for USB internet connection(if u r in India, I want to configure AirTel USB internet connection) ??
View 1 Replies View RelatedNetworking :: Configure DDNS On RHEL 5?
Feb 5, 2010I have setup dns on my rhel 5 server. It is working fine. My dhcp server is setup on my sonic firewall. The sonic firewall hands out our IP addresses. My dns server sees the static IP addresses but how do I get name resolution setup for dhcp?
View 1 Replies View RelatedGeneral :: How To Configure Sendmail In RHEL 4.6
Oct 18, 2010I am on Red Hat Enterprise Linux AS release 4 (Nahant Update 6). I need to configure Sendmail in my Linux Server.
1. edit /etc/mail/sendmail.mc
dnl #
dnl DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
dnl DAEMON_OPTIONS(`Port=smtp,Addr=172.16.10.6,Name=MTA')dnl
dnl #
2.rebuild /etc/sendmail.cf from the revised /etc/mail/sendmail.mc thus:
m4 /etc/mail/sendmail.mc > /etc/sendmail.cf
3. Edit /etc/sysconfig/sendmail
DAEMON=yes
QUEUE=1h
4.And restart sendmail
cd /etc/mail
make
service sendmail restart
5.sendmail -v abc@gmail.com
Its working but going to spam and more thing. I am not able to send to our company id..
sendmail -v abc@rbs.com
General :: Configure Sendmail On RHEL 4.6
Sep 29, 2010To configure sendmail on my linux system.
View 2 Replies View RelatedServer :: Configure One RHEL With DNS And DHCP
Jul 30, 2010I have installed RHEL 5.1 in VMWare 6 I want to configure one RHEL Server with DNS & DHCP Also I would like to PXE boot, whenever I create a new VMWare Client(RHEL), the installation should be initiated via network boot
View 2 Replies View RelatedServer :: How To Configure Bind On RHEL 5
Mar 3, 2011I am a newbie in configuring linux servers. Can I have an easy step-by-step walkthrough for bind 9 with chroot on RedHat enterprise 5 .
View 3 Replies View RelatedServer :: How To Configure DHCP In RHEL 5
Jul 5, 2010here to learn some good technical stuffs
View 6 Replies View RelatedRed Hat / Fedora :: Configure GUI With RHEL 5.5 On HP ProBook 4520s?
Oct 3, 2010Not able to configure GUI with RHEL 5.5 on HP ProBook 4520s
View 2 Replies View RelatedRed Hat / Fedora :: Configure A Dhcp Server On RHEL 5.3 Or 14
May 1, 2011i'd like to configure a dhcp server on my RHEL 5.3 or Fedora 14, since i don' have a legitimate DNS server....n it asks for option domain-name " "what do i put in there.. me got two nics for my WAN(dhcp enabled) n LAN...i just want to parctice at home for my future job...
View 3 Replies View RelatedGeneral :: How To Configure Hyper Terminal In RHEL
Mar 16, 2010I have a hardware design which is completely tested and verified on windows OS. My hardware is connected to hyper terminal. Whenever I give a command from hyper terminal then my hardware will response in what way I need. As I am new to linux os I don't know how to open or how to configure hyper terminal in linux. I stopped my work completely.
View 1 Replies View RelatedGeneral :: Configure Yum Server On Rhel-5 Without Use Of Internet?
Jan 17, 2011WITHOUT USE OF INTERNET ,how can i configure YUM server on RHEL-5
View 1 Replies View RelatedGeneral :: Need Procedure To Configure Samba On RHEL 4
Jan 25, 2010I need procedure to configure samba on RHEL 4
View 1 Replies View RelatedServer :: Configure DNS In RHEL 5.3 To Resolve Domain Name?
May 2, 2010I would like to configure DNS server in RHEL 5.3 to resolve domain name. Do you have step by step procedure or automated script to configure the dns server?
View 2 Replies View RelatedGeneral :: Configure RAID 1 Within TWO HDD In RHEL-5 During Installation Moment?
Dec 14, 2010I wanna configure RAID 1 within TWO HDD in RHEL-5 during installation moment .I have the following questions regarding software raid vs hardware raid :
1) What is the basic difference between hardware and software raid
2) In software raid , If I use two HDD as RAID1 , then if one HDD is failed , can I boot it from another HDD ?
3)In software RAID , Between two HDD , If One HDD is failed then if I remove bad HDD and add a spare HDD then is it automatically synchronized with FIRST HDD ?
4) In software raid is it possible to keep '/boot' partition in two HDD (I use 2 HDD as RAID1) as separate partition ?
5) Finally is there any documnets or sites where I get software raid configuration during INSTALLATION moment in using GRAPHICAL mode , plz give me the address.
5 :: Configure RHEL To Use Packages From CentOS Extras Repositories?
Sep 24, 2010Can I configure RHEL to use packages from the CentOS Extras repositories?
View 6 Replies View RelatedNetworking :: Access / Configure Internet In ( RHEL 5) With Dell Studio 15
Aug 12, 2010I am using DELL Studio 15, Windows Vista Home Premium. I have a dual boot of Linux (RHEL 5). My question is how to configure Internet access in my PC in LINUX OS. Windows mode :
how do i access Internet :
I insert a LAN cable to my laptop and access internet. or I insert the cable to my wifi router and access it wireless whenever I am bit far away. RHEL 5.0 Linux 1) UNABLE to access internet when I connect the lan cable to my laptop. 2) Is there any way i can access internet or should i use any drivers that are provided my dell pc. I am very new to linux and i am not sure to which and how to use it.
General :: Configure Yum Locally - Yum.repos.d/rhel Debuginfo File?
Aug 8, 2011i was trying to configure yum locally, can i copy files to any other location other than /var/ftp/pub. how to configure yum.repos.d/rhel debuginfo file.
View 2 Replies View RelatedSecurity :: Configure RHEL 5.5 Syslog To Accept SNMP Traps?
Jul 14, 2010Is it possible to configure the RHEL 5.5 syslog to accept SNMP traps? That is I want to use a central logging server to pick up other systems syslogs, and SNMP messages from systems that cannot use remote syslog functions.
View 3 Replies View RelatedGeneral :: Why Does Nginx Redirect To A Strange URL
Aug 7, 2010I had just set up nginx on my server. I have PHP and everything working okay. Except when I try the URL
http://xxx.xxx.xxx.xxx/123
I get redirected to
http://_/123
but when I try the url
http://xxx.xxx.xxx.xxx/123/
It works just as I want it to. How can I get nginx to treat the slashless url decently?
Server :: How To Force Nginx To Do DNS Lookups
Jun 2, 2011way to get nginx to perform DNS lookups at regular intervals against hostnames that are defined for upstream servers? It seems nginx only performs a DNS lookup once, the first time it starts, and subsequently does not perform any other DNS lookups. This causes problems when the ip addresses of our upstream servers change.
I posted this same question in the nginx forum; however I also posted it here as it seems that not many of the posts there get answered.
[URL]
Server :: Nginx Giving A 403 Error?
Feb 6, 2011I have been looking for a while now, but I keep getting 403's for maps but not for files... So if you go to http://gmod.ws/ you get the error but if you go to http://gmod.ws/index.php you don't.I don't see where the problem is.We're running a CentOS 5.5 box.
View 2 Replies View RelatedSoftware :: Make Fails On Nginx-0.8.49?
Oct 3, 2010I am attempting to compile nginx-0.8.49 with the upstream fair module. The configure script seems to run ok with the following options:
Code:
#./configure --add-module=../upfair
but when I run make it fails with this error:
Code:
objs/src/os/unix/ngx_process.o: In function `ngx_process_get_status':
/mnt/store/src/nginx/SOURCES/nginx-0.8.49/src/os/unix/ngx_process.c:490: warning: `sys_errlist' is deprecated; use `strerror' or `strerror_r' instead
/mnt/store/src/nginx/SOURCES/nginx-0.8.49/src/os/unix/ngx_process.c:490: warning: `sys_nerr' is deprecated; use `strerror' or `strerror_r' instead
[Code]...
Programming :: Nginx X-Accel-Redirect ?
Jun 12, 2011I have this code in PHP that is hosted on an nginx server.
Code:
I can download the files but the problem is I think nginx is treating it as a text file and changes all "0x0A" to "0x0D 0x0A"
Unfortunately the files are not text files but executable files which makes the downloaded file corrupted.
Do I need to add a specific header to prevent this from happening?
CentOS 5 Server :: Get Php-fpm Running To Use With Nginx?
Jun 18, 2009I'm trying to get php-fpm running to use with nginx. I usually just use spawn-fcgi, but I would like to try php-fpm this time. I was hoping that it would be as easy as yum install php-fpm, but alas, that is not so. how to get php-fpm working on CentOS?
View 1 Replies View RelatedCentOS 5 :: Install PHP And MySQL On Nginx?
Feb 26, 2011how to install PHP and MySQL on Nginx with CentOS?
View 1 Replies View RelatedDebian :: Nginx Php-fpm Permission - Access Denied
Dec 15, 2015I have installed Nginx with PHP-FPM on Debian 8 to learn more about Linux permissions. Nginx is run as www-data user.
I have created a simple PHP script that outputs the date. I have set the permission as 000 (no permission at all) and it is root:root. How come I can still run this script in the browser without getting access denied? The script is inside a folder with world execution. When removing the world execution permission, the script can't be run. How does this all connect to each other?
