I've met several issues recently while building the MySQL server from CentOS 5 SRPM. The root problem are the expired SSL certificates used for built-in tests making all the tests fail. The problem is widely described on the net and I am in doubt now what to do: should I submit a patch or what?
View 1 RepliesIs there a startup option I can put in the /etc/init.d/mysqld script or an option in the /etc/my.cnf file to enable the Archive engine for MySQL or do I have to compile it from the source?
[Code]....
I am trying to build an application on linux and it requires compilation of several files along with my application. Till now I have been trying using a makefile which is built for a test application which uses almost the same files as the mine by replacing its main.c file. But mow have ended up writing everything, function declarations, definitions... in the same file looks very unprofessional and is quite difficult to manage.
View 2 Replies View RelatedI tried building but got errors at the end.
make: *** No targets specified and no makefile found. Stop.
I would like to create some packages for programs that use the Git software to manage the source, I want to do this directly using the source code in the Git repo as the source code form the package. Does anyone have any hints or directions on how to do this? I been looking round the web for information about this, but all I seem to find is for about storing and build Debian packages from git, this is not what I want to do as these packages are for personal use and I have no need for this.
View 3 Replies View RelatedI have this source.tar.gz, I unpack it and cd into it, then I
Code:
$mkdir build
$./configure --lots-of-options --prefix=$PWD/build
$make
$make install
So I have inside my build folder, 4 folders, usr, lib, man, share. How do I convert this into a binary rpm package...?
I'd like to clear up my misconception towards various types of installations. Is one better than the other? Do more senior people prefer compiling from source code? Hows does is compare to yum install or install from rpm?
View 7 Replies View RelatedI already have compiled the source and I want to make an rpm. What do i do with it? Can i utilize the make file?
View 1 Replies View RelatedI've been trying to install Compiz 0.8.4 from the source code provided by the Compiz people.
However, when I run make on the first set of code (compiz-0.8.4 tar package), it halts with the following error:
Code:
As well as --disable-gconf and --disable-gnome since gnome isn't install on Slackware (I've also tried it without those, but it picks up on it anyway and throws them out). The folder I'm running this from is /root/Desktop/Compiz Fusion/compiz-0.8.4.
I had created a database named details with the following table.
create table details_of_all_jobbers (
Sr_No int NOT NULL AUTO_INCREMENT,
First_Name varchar(50),
Middle_Name varchar(50),
Sur_Name varchar(50),
Mobile_Number varchar(50),
Date_of_Birth varchar(50),
Address varchar(100),
City varchar(50),
Pincode varchar(50),
Status varchar(50),
PRIMARY KEY (Sr_no));
I want the insert page, view page, update page, delete page which is coded in php so I request you to give me the code for building the site for me.
I've become reliant on Net Objects Fusion for building and maintaining my web site. NOF is still only offered as a windows app and it is the only reason I have to keep Windows installed.Can anyone propose a comparable application (preferably open source) that will run in Linux?
View 4 Replies View Relatedrunning ubuntu 10.4 x86_64 downloaded source tarball of fakenes-0.5.9-beta3. tried to compile with ./cbuild as per instructions and it gets to the following and provides quite a few errors
[code]...
Apparently, the wireless adapter Realtek 8171 uses the rtl8192se driver, which is currently available only as source from Realtek's website. Is building a driver equal to building a package? Should I follow the same cautions, say these ones?
View 9 Replies View RelatedI'd like to have a shot at building FBReader 12.1 from source for use within F12 (kernel 2.6.31.9-174.fc12.i686.PAE) but am having problems locating the following .rpm files:
libz and libbz2 -- libraries for zip and bzip2 (de)compression
libfribidi -- for bidirectional text support
lincurl, version >= 7.17 -- for network libraries integration
why do we have to define both Source/Destination AND Direction when building firewall.Isn't direction= source->destination? what would happen if source and destination were swapped?
View 3 Replies View RelatedI have a problem with PAE kernel sources and builing nvidia driver. uname -a returns Linux myX 2.6.31.12-174.2.3.fc12.i686.PAE #1 SMP Mon Jan 18 20:06:44 UTC 2010 i686 athlon i386 GNU/Linux
1. I run ./NVIDIA-Linux-x86-173.14.22-pkg1.run and I get an error message that kernel sources cannot be found.
2. My folders: /lib/modules had these two subfolders 2.6.31.5-127.fc12.i686.PAE 2.6.31.12-74.2.3.fc12.i686.PAE so what I did, I run: yum install kernel and got inside /lib/modules this extra 3rd subfolder (no PAE) 2.6.31.12-174.2.3.fc12.i686 On the other hand /usr/src/kernels has one subdirectory (no PAE): 2.6.31.12-174.2.3.fc12.i686
3. Now, when I build nvidia driver, it still gives me the error, that no sources found, so I do
./NVIDIA-Linux-x86-173.14.22-pkg1.run --kernel-source-path /usr/src/kernels/2.6.31.12-174.2.3.fc12.i686 and get an error that this seems to be the incorrect version. And I guess this is true as I have no PAE sources.
4. Further, when I look at
[Code]...
So I'm building a custom kernel cuz I want the fbcondecor patch in my kernel. I use the same .config that 2.6.32 debian kernel package comes with. This kernel runs perfectly. I pass --initrd to make-kpkg when building the package but no initrd is built when I install it so I have to make it using "mkinitramfs -o /boot/initrd.img-2.6.33 2.6.33" to get it to boot. Now when I try to build the nvidia drivers it complains it can't find the source. I did build kernel_headers and installed them also the source is in /usr/src/linux. I also tried to specify the path by passing --kernel-source-path= to the nvidia script but no change. What is going on? I've done this fifty times before and never had any problems. Has there been some changes to how debian kernel packages are built? EDIT: Just thought I'd add some info about the steps I took.
Code:
tar xjvf linux-2.6.33.tar.bz2
ln -s linux-2.6.33 linux
cd linux
patch -p1 < ../fbcondecor-0.9.6-2.6.33-rc7.patch
cp /boot/config-2.6.32-trunk-686 ./.config
make menuconfig Loaded .config then I removed support for maxtorfb, tile blitting and some sirrusfb thing, nothing thats relevant to my system. Changed cpu from Pentium 4 to Core 2 and added framebuffer decor
support from my patch, exited and saved. Then:
[Code]....
EDIT2: I have now tried to build 2.6.32.8 in the same way with the same strange results, anyone have any thoughts as to what I'm doing wrong just throw it at me, I'm getting desperate and running out of ideas. I've checked all the kernel source symlinks and everything looks good.
I want to upgrade existing MySQL 5.0.77 version on CentOS 5 Red Hat Linux to MySQL 5.1.x. Is anybody have list of patches or upgrades to upgrade to MySQL 5.1.x?
View 6 Replies View RelatedI have a few mail servers, a mail log server and a web server running on Centos 5. Now I have a task: to avoid accidental crashes on the production servers while installing updates, my boss asked me to do clones (these clones will all be VMware virtual machines) of the servers (EXCLUDING the actual e-mails and log contents) and then to run those clones on VMWare Server. This way, first I will install and test updates on the clones and - if they will be running without crashes - I will apply the updates on the real production servers themselves.
I have already installed VMWare Server 2.0 I have a few questions: How do I build the virtual machines to exclude the actual mail files and mail logs? Can I use VMware Converter for this purpose, or do I have to use another program? How do I actually do this cloning? Is there a tutorial on how to do this?
I have MySQL 5.1.34 and PHP 5.1.6 installed on my system, how do I install php-mysql? Each time I try, it says
mysql-5.0.45-7.el5.i386 from base has depsolving problems
-- > mysql conflicts with mysql-server-community
error: mysql conflicts with mysql-server-community
I just configured a complete Cent OS 5.2 system for use as a web server. I can configure Apache and PHP but MySQl seems to be causing some issues -
[mysqld]
datadir=/var/lib/mysql
socket = /var/lib/mysql/mysql.sock
user=mysql
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
[Code]...
I am trying to install php-mysql but I am getting conflicts. I manually installed
MySQL-shared-community-5.1.32-0.rhel5
MySQL-client-community-5.1.32-0.rhel5
MySQL-server-community-5.1.32-0.rhel5
and I can not seem to find a php-mysql that works with MySQL 5.1
I followed the below thread and added the CentOS-Testing.repo and did a yum update php and it updated 30 packages, but when I try to install php-mysql I get :
[URL]
yum install php-mysql
Setting up Install Process
Parsing package install arguments
Resolving Dependencies
[Code].....
Where can I find a php-mysql that works with MySQL 5.1? I checked the mysql website and can not seem to find any matches.
I just tried installing mysql on my vps from source code. after untaring the source code. when i tried to configure the ./configure script. iwas not able to find it. it is not there.
View 1 Replies View RelatedI am trying to install MySQL by compiling source files.Using mysql-5.1.46]version./configure --prefix=/usr/local/mysql was fine and I am getting following error while "make"
[Code]...
I'm trying to build boost on a 64-bit CentOS 5.4 install. I have Python 2.6.4 built and installed at /opt/Python_2.6.4/, and I've appended the user-config.jam file with:
using python : 2.6 : /opt/Python_2.6.4/python : /opt/Python_2.6.4/Include : /opt/Python_2.6.4/Lib ;
The standard system Python is 2.4.1 but the tools I'm using require 2.6, so I've built this version and installed it independently of the system version 2.4.1 to avoid any conflicts.
As I'm sure you've already imagined, I get the error:
LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)
I see that this is a long standing bug, but I have yet to find a fix. I've tried various CCFLAGS, CXXFLAGS, etc. to push for a 64-bit compile or a 32-bit compile (-m64 or -m32).
The offending file is pyport.h - is there a 64-bit friendly version that I don't know about?
I am using liferay5.2 with tomcat 6. after installation of liferay5.2 i am unable to configure the datasource that points to the database mysql.without this liferay wont function. how to create a mail session in tomcat that points to the mail server. i am using fedora 6.
View 5 Replies View RelatedI am using MySQL version 5.1.47 (64bit) on Centos 5.5 in production environment. I am exploring option to monitor MySQL though SNMP traps. Can anybody please let me know if there is any open source SNMP tool that can be used for MySQL monitoring?
View 4 Replies View RelatedI am trying to modify the source code of a C application (quagga) in order to insert data into a mysql table. I have added 2 new source files to the source (neto_mysql, neto_trend) which in turn use mysql.h. I have also modified the Makefile.am file to include the /usr/include/mysql directory.
When trying to compile, i get the following error. What am I missing? I have minimal experience with formal C applications like this. I feel like I may also have to include the mysql.h file in the libbgp? I dont understand why it cant find the mysql functions...
Code:
if gcc -DHAVE_CONFIG_H -DSYSCONFDIR="/usr/local/etc/" -I. -I. -I.. -I.. -I.. -I../lib -I/usr/include/mysql/ -fPIE -Os -fno-omit-frame-pointer -g -std=gnu99 -Wall -Wsign-compare -Wpointer-arith -Wbad-function-cast -Wwrite-strings -Wmissing-prototypes
[code]....
I have been try for a while now to build this and I am not getting very far. I have download the usbip-0.1.7.tar.gz from sourceforge.net I then followed [URL] to get a full kernel source. then went to usbip-0.1.7/drivers/2.6.18 and issued the command
Code:
make KSOURCE=~/rpmbuild/BUILD/kernel-2.6.18/linux-2.6.18.i686
but it failed with:
Code:
/home/scott/usbip-0.1.7/drivers/2.6.18/stub_rx.c:377: error: redefinition of 'usb_endpoint_xfer_bulk'
[Code].....
I have CentOS 5.5 (Final Release) installed on my netbook. I am trying to configure vmware on this machine. When I run vmware-config.pl it goes smooth until it tries to build vmmon module. It gives me following error when it tries to build vmmon module:
Code:
Extracting the sources of the vmmon module.
Building the vmmon module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config10/vmmon-only'
[code]....