Software :: Git-svn / When Run Git-svn Still Get Various Errors?
Dec 28, 2008
I'm trying to make git-svn work on my slackware 12.2 box.Seems like I have to install the Alien::SVN cpan module for that purpose, so I open "perl -MCPANPLUS -e shell" and I run "install Alien::SVN".
After configure, make and make install I get:
Code:
/bin/ginstall -c -d /usr/lib/perl5/site_perl/5.10.0/i486-linux-thread-multi/Alien/SVN --prefix=/usr
/bin/ginstall: unrecognized option `--prefix=/usr'
Try `/bin/ginstall --help' for more information.
make: *** [install-fsmod-lib] Error 1
installing libs failed at inc/My/SVN/Builder.pm line 165.
*** Install log written to:
/root/.cpanplus/install-logs/Alien-SVN-1.004006000-1230506177.log
Module 'Alien::SVN' installed successfully
No errors installing all modules
Obviously the problem resides in the fact that ginstall does not support the "--prefix" flag. I tried to mess up with the Makefile and remove that flag where apropiate, then manually run make install, which seemed to run without errors to the end, but when I run git-svn I still get various errors.
View 1 Replies
ADVERTISEMENT
Feb 22, 2010
I',m executing ping, but it didn't work, in order to find the mistake in my network I would like to know how to see the errors:
Code:
18 packets transmitted, 0 received, +12 errors, 100% packet loss, time 17038ms, pipe 4 I want to see this +12 errors. Could I do that?
View 2 Replies
View Related
Feb 26, 2010
I am running Valgrind on my program. It shows me two errors but mentions only addresses against them and not actual code even on a debug build.
The output is
==23002== Memcheck, a memory error detector.
==23002== Copyright (C) 2002-2005, and GNU GPL'd, by Julian Seward et al.
==23002== Using LibVEX rev 1575, a library for dynamic binary translation.
[code]....
View 1 Replies
View Related
Jul 22, 2010
Can anybody tell me what kind of fsck errors are found on a system?
View 5 Replies
View Related
Jul 16, 2015
I use debian 8 and sometime when I install some packages I see these errors
Code: Select allProcessing triggers for shared-mime-info (1.3-1) ...
Unknown media type in type 'all/all'
Unknown media type in type 'all/allfiles'
Unknown media type in type 'uri/mms'
Unknown media type in type 'uri/mmst'
Unknown media type in type 'uri/mmsu'
Unknown media type in type 'uri/pnm'
Unknown media type in type 'uri/rtspt'
Unknown media type in type 'uri/rtspu'
Processing triggers for man-db (2.7.0.2-5)
but app or packages installed
View 1 Replies
View Related
Jul 29, 2011
So I recently purchased a Linux Virtual server and I've got everything configured pretty much except for PHP5 for Apache. I keep getting this error when trying apt-get install php5 and apt-get update:
[Code]...
I checked my sources.list file and it's setup correctly, and I even added ftp.us.debian.org but it's still not working.I'm pretty familiar with Linux and can't figure this one out. The server is connected to the internet as I can access my websites from the internet and SSH into the server, and the firewall is configured to allow SSH, HTTP, and FTP. I believe apt uses HTTP and FTP so it shouldn't be blocking anything.
View 1 Replies
View Related
Jul 29, 2010
During my upgrade I had errors. 3 times the same list of errors.
Once they followed:
Once they followed:
Once they followed:
The errors are:
Should I try to do something about it? My computer seems to be functioning normally.
View 5 Replies
View Related
Feb 14, 2011
compName:/home/usrName# apt-get update
I don't have this problem when I take this laptop to work and connect to the network there, so I thought it must be a problem with the way my modem/router is configured. But when I turn off the firewall, the problem persists. Actually, I'm not very knowledgeable about networking issues, so I'm not sure I'm turning off the firewall correctly, but in the config web page for my router, I go to firewall settings, pick the computer by name, and choose an option that says "Allow all applications (DMZplus mode)". I've also rebooted the laptop since changing this option and tried again with the same results.
View 2 Replies
View Related
Aug 30, 2010
I want to download with yum but always see this errors:
And at last the download speed comes very slow:
This is my etc/yum.repo/fedora.repo:
Fedora.updates.repo:
There is no other file in the /etc/yum.repo/
View 14 Replies
View Related
Dec 18, 2010
Not sure how this happened, but can't get back to a 'yum update; yum upgrade' without errors.
View 12 Replies
View Related
Oct 11, 2010
I get this error when I run gedit as root in terminal. GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See GConf configuration system for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
So I looked around and found something about running a system check. Well I really couldn't find to much but I did find the command fsck and running it with the -n option this is what I got.
[Code]...
As you can see I have some orphaned inodes and these are probley from a Yast2 crashing a couple of times on me getting lockup because a repo was down or not responding.
View 2 Replies
View Related
Oct 15, 2010
Running 11.3, kde4 unstable, hibernation worked til the 5th of this month, the system is updated as of today
Hibernate option exists in kmenu but nothing happens
If I look at /var/log/pm-suspend.log it is dated 10 days ago and the hibernation was a success
If I run /usr/lib/pm-utils/bin/pm-action nothing happens nor gets displayed
View 9 Replies
View Related
Jun 16, 2011
I am getting errors when I try to install any package on my RHEL 5.3 linux box. I've previously installed mc(midnight commander) using yum but recently it started failing.
I've inserted a log of a session below.
[root@anjanb ~]# yum install multitail
Repository engineering-update is listed more than once in the configuration
Repository engineering-install is listed more than once in the configuration
Repository emergency-update is listed more than once in the configuration
Repository emergency-install is listed more than once in the configuration .....
Trying other mirror.
Error: failure: repodata/primary.xml.gz from adobe-linux-i386:
[Errno 256] No more mirrors to try.
View 2 Replies
View Related
Jan 24, 2010
I have errors on my disk would appreciate some assistance on how to eliminate the errors.Here is the output
Code:
sudo e2fsck -nfv /dev/sda6
e2fsck 1.41.9 (22-Aug-2009)
Warning! /dev/sda6 is mounted.
Warning: skipping journal recovery because doing a read-only filesystem check.
Pass 1: Checking inodes, blocks, and sizes
Deleted inode 109 has zero dtime. Fix? no
Inodes that were part of a corrupted orphan linked list found. Fix? no
[Code]...
View 3 Replies
View Related
May 13, 2010
For starters: I need to get my printers working. Sys>Admin>Printing. Only once in the past few days was I able to enter my printers. When 10.04 let me, I thought it would remember, but the next time I turned on the PC, no printers.
When I go to:
Sys>Admin>Printing> "add new" is blanked out...There is no way to add them again. "Connect" to localhost (these are SAMBA Printers BTW) "CUPS Server Error" is the message I get 'failed to connect to server'
View 2 Replies
View Related
Sep 4, 2010
I clicked "Safely remove hardware" (not sure if it's right - using Russian version..). It's right above Properties (right-clicking on the disk in Computer). So, I want to get it back. How do I do that? Also, how do I check the SD for errors?
View 2 Replies
View Related
Oct 24, 2010
This is a new installation of Ubuntu, everything was working great after installing the programs and configuring settings until a system restart brought these errors down:It cannot connect to the internet, I've tried everything even restarting the network with the terminalThe windows do not have borders, I know this is a common problem but I've read through many different posts and nothing helps, this all happened at the exact same time and was working perfectly beforeWhen you logoff, shutdown, or end your session in any way it says there is an unknown program that won't quit, you have to end it because it will never end on it's own.I've restarted many times in the past but all this suddenly happens randomly, I have Ubuntu 10.10 32-bit and CompizFusion if that makes a difference.
View 6 Replies
View Related
Mar 7, 2011
Last night I attempted to install the PulseAudio Equalizer. It appears that i followed some old instructions, because the repository does not seem to exist.
Segment from sudo apt-get update:
Code:
Err http://ppa.launchpad.net maverick/main Sources
404 Not Found
Err http://ppa.launchpad.net maverick/main i386 Packages
404 Not Found
Fetched 4,923B in 1s (2,476B/s)
[Code]....
How do I remove this bunk PPA? It's blocking my ability to update my software, etc.
View 3 Replies
View Related
Jul 20, 2011
When I installed Ubuntu 11.04 i went to some blogs to do the classics "10 things to do after installing Ubuntu 11.04". It seems all is fine. But when i do this command in the terminal,
Quote:
sudo apt-get update
I get this errors ("imposible obtener"="can't get", i think this is the translation) in the terminal:
Quote:
W: Imposible obtener http://ppa.launchpad.net/sun-java-co...source/Sources 404 Not Found
W: Imposible obtener http://ppa.launchpad.net/sun-java-co...-i386/Packages 404 Not Found
W: Imposible obtener http://ppa.launchpad.net/tucan/ppa/u...source/Sources 404 Not Found
W: Imposible obtener http://ppa.launchpad.net/tucan/ppa/u...-i386/Packages 404 Not Found
View 7 Replies
View Related
Jul 27, 2011
1. I've binded compiz' "scale - initiate window picker" to the top right corner. But it just seems to stop working randomly until I restart my pc. Why does this happen?
2. Scale - "initiate windows picker for windows group" doesn't seem to work at all? For example I open two firefox windows, touch the keys I've set up (super + c) but nothing happens?
View 5 Replies
View Related
Feb 26, 2010
I chose Mint 8 Fluxbox and have the iso. I cannot figure out how to check the iso for errors and the MD5 signature.I'm using Windohs XP so I tried to install MD5sum.exe. When I double click on it to run it all it does is flash and then nothing.When I type in the commands it says it can't find it or it can't read it or something.I may be typing the commands incorrectly. I'm just not understanding.I need to check the iso for errors but can't understand how to check it.
View 5 Replies
View Related
May 27, 2011
I am running Debian Lenny and if I try to install something with apt-get it behaves normally until near the end when I get this sort of thing:
Code:
And more of the same. The file w3m contains this:
Code:
So what please is the syntax error and how do I correct it? What is the function of /usr/share/menu?
View 8 Replies
View Related
Oct 9, 2010
Been living with apt-get not working for a while now, don't know how it broke but i'm running a 2.6.26.8 kernel for vmware and maybe thats it?
Code:
The following extra packages will be installed:
The following packages will be upgraded:
View 10 Replies
View Related
Feb 14, 2010
I have a MediaWiki installation, which returns a 404 error to the client when they request a page that doesn't exist yet. This is correct/desired behaviour, however it is also expected behaviour, so I don't want to log these errors to the log file. Examples of these logs are:
Code:
/index.php/ArchServer_Wiki:Current_events: 2 Time(s)
/index.php/ArchServer_Wiki:General_disclaimer: 1 Time(s)
These "false positives" make it difficult to find genuine 404 errors that need attention when reviewing the logs.
[Code]...
View 3 Replies
View Related
Jul 28, 2010
I have NFS almost up and running. On the server /etc/exports is good, hosts.allow and hosts.deny are good, I can make the connection and in /var/log/messages on the server but on the client at 192.168.20.95, when I enter:mount -t nfs -o nfsvers=3 192.168.20.1:/home/nfs /home/nfs_local.It doesn't error out, doesn't come back to a prompt, it just sits there. I have verified not a permission issue.
View 1 Replies
View Related
Jul 22, 2011
I have a general question regarding memory errors. I frequently ran into memory errors such as seg fault, double free, etc. Sometimes I got the following traces for example.
*** glibc detected *** /mnt/click: free(): invalid pointer: 0xb7ed8450 ***
======= Backtrace: =========
/lib/libc.so.6[0xb7dff905]
/lib/libc.so.6[0xb7e011a3]
[code]....
Then, I just run gdb, valgrind things and suddenly I started ask questions myself that what are those traces and how can I analyze?
View 1 Replies
View Related
Sep 7, 2010
When compiling a C program i get the following errors.How do i modify the code to remove these warning messages?
1) "test.c", line 614: warning #4212-D: mismatch between character pointer
types "unsigned char *" and "char *"
p_data = m_lines[p_text_idx];
[code]....
View 2 Replies
View Related
Feb 28, 2010
I am trying to compile a program for my assignment at school that uses curses.I have installed libncurses5-dev, and curses.h is now in /usr/include, but I am getting all these errors(it compiles fine at school).
Code:
grcunning@grcunning-desktop:~/school/cs474/assign7$ gcc -o proj7 proj7.c
/tmp/cc2ZFXrs.o: In function `main':
[code]....
View 2 Replies
View Related
Dec 28, 2010
I just upgraded to Debian Squeeze (from Lenny) and there are several errors occuring.
The first one is that whenever I want to use mplayer it gives me the following output:
Maybe that has to do with faulty drivers, I'm not sure yet.
What's bugging me a little bit more is whenever I start a shell like konsole or xterm it displays the following:
It roughly translates to:
A third problem is when I try to use something like mplayer or java and then try the tab completion I get yet another error.
Which would be:
So I get "bash: _get_comp_words_by_ref: command not found", however it's not like that with all of my applications. Tab completion after the command "vlc" for example works just fine.
View 14 Replies
View Related
Sep 30, 2015
Since installing debian 8.2 I have had a list of errors appear during the boot, I get the usual Loading, please wait message then a series of random errors.I think I am stuck in initramfs, then typing exit resumes boot. Should I be concerned and can I jump straight into the login screen without typing exit each time?
Here's a photo [URL]
View 7 Replies
View Related
