Ubuntu :: How To Fix Errors On Disk
Jan 24, 2010
I have errors on my disk would appreciate some assistance on how to eliminate the errors.Here is the output
Code:
sudo e2fsck -nfv /dev/sda6
e2fsck 1.41.9 (22-Aug-2009)
Warning! /dev/sda6 is mounted.
Warning: skipping journal recovery because doing a read-only filesystem check.
Pass 1: Checking inodes, blocks, and sizes
Deleted inode 109 has zero dtime. Fix? no
Inodes that were part of a corrupted orphan linked list found. Fix? no
[Code]...
View 3 Replies
ADVERTISEMENT
May 19, 2010
Just did a fresh install of Lucid on my new SSD and got this:
View 9 Replies
View Related
Jun 21, 2011
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
View 6 Replies
View Related
Jun 21, 2011
I'm currently running ubuntu 10.10 64bit. My problem started occurring a couple days ago. When I check my disk space using either disk usage analyzer or Gparted it says I have about 69 gigs left. But say I am in a folder on the bottom of the window it will tell me I only have 48 gigs. And just to test I tried going over the amount specified in the folder window and it tells me I have insufficient space.
View 6 Replies
View Related
Jun 22, 2011
I have a server that, due to the amount of data it's moving, tends to trash up the hard drive when I have a power outage or crash. It doesn't have a keyboard or monitor attached to it normally so it's a real pain when I have to boot it back up. I have to hook one up just to hit F to have it fix all the errors. Is there a way to have it do this automatically on boot rather then having to confirm it?
View 2 Replies
View Related
Jun 10, 2010
The last few times, I booted ubuntu, the automatic disk check ran and told me that there were "serious errors on /". This had happened once before but that time, I found nothing wrong on booting into ubuntu. However, this time, the scan doesn't seem to progress any further after detecting the error. What is the problem?
View 7 Replies
View Related
Aug 2, 2009
On my FC11 installation Palimpset Disk Utility icon in the top menu bar is reporting that I have a disk failure with the caption "one or more disks is failing".When I open up the details section in Pilimpset I can see that "2 sectors are failing",I have checked this with gparted checking facility and it reports that the disk is OK.What I would like to do is to check the disk using a command like tool or ofline tool, which would then tell me where those bad sectors are on that partition so that I can resize it (using gparted) and have the bad sectors in NON ALLOCATED DISK SPACE.
View 4 Replies
View Related
Dec 29, 2009
Anybody else get errors about the 11.2 disk image being bad? All the linux and windows software I use say it's not in the "proper" format. I also straight burned it as a bootable disk and it still doesn't work.
View 8 Replies
View Related
Aug 26, 2010
I have been having a lot of problems with disk errors and want to find a solution or more stable distro. I can not post the link yet since I am new but it is in the Ubuntu section of this forum and titled "Hibernate or spin down or hard shutdown causes errors." I am running Ubuntu 10.4 64bit on an AMD64 2.2gh.
I have been doing my research about distros and know a bit about what is going on with Linux. Sort of transcending past newbie I think. But I want to know what is the most stable distro for the least amount of Disk errors, or how to get ubuntu not to have so many errors. Maybe install the 32bit version? I want something fast and simple where I can run gimp/inkscape/openoffice/and maybe some of the video editing packages like Kino/piviti/cinerella.
View 4 Replies
View Related
Mar 13, 2009
Need to know if there are any known errors allocating disk space using rsync. I have recently setup a small file backup server (2 500GB drives) running Centos 5.2, with a rsync daemon (via xinetd). However I have noticed that after about a week of usage, if I reboot, then the disk that rsync uses, has a lot of multiply claimed blocks and inode errors, such that I have to run fsck multiple times to fix. This has happened a couple of times now so I don't think that its random.
View 11 Replies
View Related
Dec 16, 2010
I had a set of rather unusual problems on installing a new 500Gb hard drive on my F14 system, I've solved them, but they were that unusual that I thought I should share them in case anyone else gets the same thing! I'd been experiencing intermittent faults on one of my drives, (lock ups for no reason, occasional boot ups that failed due to ' disk unreadable errors' and other odd errors). I assumed that the drive was failing, but it always showed 'Heathy' on disk utility! This was the disk with the OS on, plus my main 'data' disk had some bad sectors, so I thought I'd buy a nice big 500Gb and reinstall the whole system.
I backed up all my data to an external 'USB' drive, opened the case, (a big old under the table 'desktop', why do they still call them 'desktops'?) shoved in the new SATA drive and rebooted, intending to format the new drive to EXT4 and partitioning it before installing F14 again! OOOOOOOOOW! Major drive failure, missing OS, whole list of SDB errors! Control D, to reboot, BIOS only sees one drive; SDA (I have three, two IDE and one SATA) plus the one I just put in makes four. I go into BIOS and discover that it not only cant see any of the other drives, but my two DVD drives are missing too!
Now I've been building my own systems and mucking about with computers since before you could buy them, and Ive never seen a problem like this one! At first I thought the new drive had screwed my system, for on removal, the problem persisted! Then I noticed that the IDE connector in drive SDB, (the long 40 pin job) was just slightly out of line with the back of the drive, pushed it firmly in and what do you know, everything works! We moved recently and I think the vibration was enough to loosen the connector to give intermittent faults, and pulling the cables about to get the new drive in, pulled it out further......
View 10 Replies
View Related
Nov 20, 2009
I've been trying to burn Suse 11.2 to a DVD now for a couple of days but I keep running into trouble. When verifying a disk after burning Suse on it it keeps giving me errors. I've tried Nero and ImgBurn, different burners, different ISOs, different burning speeds (downloaded via torrent and http) but it keeps giving me the verification error.
The only thing I haven't tried is a different brand of DVDs but until now I've never had any problems with this brand.
View 9 Replies
View Related
Sep 4, 2010
Howto check hard disk for hardware errors without damaging installed OS?
View 6 Replies
View Related
Feb 22, 2010
I',m executing ping, but it didn't work, in order to find the mistake in my network I would like to know how to see the errors:
Code:
18 packets transmitted, 0 received, +12 errors, 100% packet loss, time 17038ms, pipe 4 I want to see this +12 errors. Could I do that?
View 2 Replies
View Related
Feb 26, 2010
I am running Valgrind on my program. It shows me two errors but mentions only addresses against them and not actual code even on a debug build.
The output is
==23002== Memcheck, a memory error detector.
==23002== Copyright (C) 2002-2005, and GNU GPL'd, by Julian Seward et al.
==23002== Using LibVEX rev 1575, a library for dynamic binary translation.
[code]....
View 1 Replies
View Related
Jul 22, 2010
Can anybody tell me what kind of fsck errors are found on a system?
View 5 Replies
View Related
Feb 26, 2011
Some thing is using up a huge amount of my disk space about 10G and I can not determine what it is. When I look at my disk usage in system monitor it say I have used about 25G and when I scan the directory in disk usage analyzer the entire file system used is 15G.
View 1 Replies
View Related
Apr 9, 2010
This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
View 3 Replies
View Related
Jun 28, 2010
I have an SiI hardware SATA RAID card, with two 500GB disks in mirrored RAID configuration. When I first plugged them in and set it up, things seemed to work ok, but on boot the raid controller told me that the RAID needed rebuilding, and it would happen automatically after POST. So I didn't worry about it, and the drive mounted fine, and it's been that way for years. I just went in and manually on-line rebuilt the RAID in the controller's BIOS, and now when I boot into Ubuntu, both disks show up in fdisk, but neither show up in /dev/disk/by-uuid. Am I missing something?
View 9 Replies
View Related
Jun 14, 2011
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies
View Related
May 23, 2010
ran out of space in my /home dir. Have a second hard drive to install and would like to designate it as additional space for /home. I do not want to mount it as a dir inside my home I would like it to simply work as though my /home simply has more space available to it.
View 1 Replies
View Related
Aug 22, 2010
WinXp sp3 is on disk sdb, then installed Ubuntu 10.04 on sda, can go into diff OS without any problem. I am going to move sda to another machine, when I unplug sda, WinXp can't start to boot on sdb. How to fix it?below is my case output$ sudo fdisk -l
Disk /dev/sda: 160.0 GB
...
Device Boot Start End Blocks Id System
[code].....
View 2 Replies
View Related
Mar 27, 2011
i have amd athlon x2 3gb RAM ddr2 two hdd one 80gb other 1tb in this computer i got only ubuntu all disk in EXT4.i want to copy 10gb many file of 700mb or 1gb ( many linux ISO )the transfer is 1mb/s this is SOOO SLOW.i did a touch /forcefsck just in case but nothing happen it is still slow!!what might be the problem ??
View 1 Replies
View Related
Aug 1, 2010
I had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b*
cp -a -d -R -v -t /media/raid_array /d*
cp -a -d -R -v -t /media/raid_array /e*
cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.
View 2 Replies
View Related
Jan 2, 2010
I'm running mythbuntu 9.04 and am having an issue with disk space.
I try 'rm' various log files but the space I free up lasts less than a minute before the disk reports as being full once more.
df -Th | sort gives:
Quote:
/dev/sda1 ext3 8.3G 7.9G 0 100% /
/dev/sda6 ext3 138G 125G 6.3G 96% /music
/dev/sda7 xfs 783G 617G 167G 79% /videos
/dev/sdb2 xfs 344G 242G 103G 71% /recordings
[Code]....
There's nothing enormous in /var/log and my trash and the root trash are empty.
why size and used fields are not the same despite 100% usage being reported on sda1..
View 7 Replies
View Related
Mar 21, 2011
I have a netbook I'm not using and which I transformed into a server with Apache, Tomcat6, Netatalk, Webmin, BIND9 and Tor.
Problem is, the disks never stop spinning because all of the programs write a few kb at least every few seconds to disk, even when nobody is connected to it.
My question is: Is there a way to have the computer boot from disk like normal (maybe even a squashfs), keep ALL CHANGES to ram and then save to disk when either the ram is full (unlikely because the server is rebooted every few days) or at shutdown?
I thought about a mixture of ramfs and unionfs but I'm not good enough yet...
View 4 Replies
View Related
Oct 16, 2009
my Fedora 11 system is not starting anylonger. It stops with the message:
Code:
VFS: Can't find ext4 filesystem on dev dm-0
The system told me since a while, that a lot of the sectors of one disk of the (software) RAID compound are failed already. So tried to disconnect each of the disks and start them separately. Unfortunaltly this is not working (for one its is not working at all, the other wents the same far as with both), when I tried to recover the system with the Fedora DVD, it said no distribution found. I am quite new and do not know so much about linux system, so i do not know what further information you could need. Maybe it can be important, that both disks are encryped (the system wents so far, that I can type in the password).
View 2 Replies
View Related
Feb 17, 2016
I received the following error when I got home from work today. If this was a windows environment, my first inclination would be to boot off my dvd and then run a chkdsk on the drive to flag any bad sectors that might exist. But there's a complication for me.
Code: Select allThis message was generated by the smartd daemon running on:
host name: LinuxDesktop
DNS domain: [Empty]
The following warning/error was logged by the smartd daemon:
Device: /dev/sdc [SAT], 1 Currently unreadable (pending) sectors
Device info:
WDC WD5000AAKS-65V0A0, S/N:WD-WCAWF2422464, WWN:5-0014ee-157c5db9a, FW:05.01D05, 500 GB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.The original message about this issue was sent at Sun Feb 14 13:43:17 2016 MST.Another message will be sent in 24 hours if the problem persists.
From gnome-disks
Code: Select allDisk is OK, 418 bad sectors (28° C / 82° F)
I did a bit of reading and it seems that most people suggest using badblocks to first get a list of badblocks from the drive and save it to a file. Then use e2fsck to then mark the blocks listed in the badblocks file as bad on the hard drive. My problem here is that this drive is part of a RAID5 array that hosts my OS. I wanted to confirm if this was still the correct process.I boot to my Live Debian disk, stop the raid array if it's active. Then run badblocks + e2fsck commands on the drive in question and then reboot.
View 1 Replies
View Related
Oct 10, 2010
I have a 2 TB disk in an external SATA dock, formatted with a single ext3 (Linux) partition, which doesn't show up in the Windows 7 Computer Management->Disk Management utility, even as a raw/blank disk. I've verified that there's nothing wrong with the disk by connecting it to my Linux machine and mounting it, and I've verified that the dock is functioning properly by connecting a different FAT32-formatted disk, which mounts flawlessly as expected.I realize that I can't actually read the ext3 partition without additional software (e.g., Ext3IFS), but why doesn't the disk show up at all? Is there some sort of stupid anti-Linux filter built in? Is there any way to force Windows to recognize the disk, so that I can at the very least use direct block access with it?
Background: I want to clone an identical 2 TB disk onto this one. Due to my hardware layout, it's much easier to have the source disk attached to one machine and the destination disk connected to another, and do the clone over the network (the network is not a bottleneck with switched gigabit ethernet), than it is to hook them both up to one machine.(1) I did this once before when both machines were running Linux, but I've since upgraded the destination machine and decided to switch back to Windows for regular desktop use. I've got Cygwin installed, and have verified that the same basic method (dd + nc) will work, but I can't do anything if Windows doesn't even consider the destination disk to exist.I only have one eSATA port on each machine. Opening them up just to do this clone is a rather large annoyance. Also, since this is my backup disk, I'd like to eventually automate the cloning from the active disk to another one that I regularly swap with a third disk that I store off-site.
View 1 Replies
View Related
Apr 29, 2011
Is it possible to install GRUB in the MBR of the only bootable disk in the system, but load configuration and images from another disk?Basically I want to install GRUB on /dev/sda, but menu and images will be under /dev/sdb2.Note: /dev/sdb is not bootable.
View 14 Replies
View Related
