Software :: Unknown Parameter Encountered: "max Log Size"
Jul 4, 2011
I had installed ubantu 11.04 and checked samba which is already installed in the system but when i start the service it asked me to install samba4, so i had installed samba 4 also.
after configuring smb.conf i had restarted the samba service and it giving me following error
Unknown parameter encountered: "max log size"
Ignoring unknown parameter "max log size"
Unknown parameter encountered: "syslog"
Ignoring unknown parameter "syslog"
[Code].....
View 28 Replies
ADVERTISEMENT
May 31, 2011
First off all, I'm booting from a large MEMDISK using PXE (900MB) . Due to our environment, I cannot decrease the size, nor move files to a nfs/iSCSI/... environment. Everything needs to be in that MEMDISK.
Now, when I try to run the OS, I get out of vmalloc space. How do I increase it to a number which allows such a large image to be mapped? I tried the parameter "vmalloc=1280M", but with that parameter, I don't get past the Booting the kernel screen.
Memory should not be an issue, since the machine(s) have at least 2GB RAM. (900MB MEMDISK + 256MB for other kernel stuff + 768MB for user stuff). The machine(s) have a Pentium 4 Extreme Edition processor, with hyperthreading and SSE2, but no EM64T.
How can I boot the system, and get past that message? Decreasing the MEMDISK size is not possible too. It is at the smallest we can get with our userland + kernel + modules.
View 1 Replies
View Related
May 4, 2010
I got the following modprobe scripts modprobe -k -q streams what does the -k parameter mean?. is it exist in older modprobe? I don't see -k parameter in recent modprobe.
View 1 Replies
View Related
May 5, 2010
I tried posting this before and I'm not sure what happened but I don't think it worked, so if it did please forgive the double post.am very very new to centOS and linux in general. I just want to setup a test web server that more closely mirrors our actual web server that is hosted by rackspace. I've installed centOS and tried to setup Apache, PHP and MySQL from a guide on the web using Yum. When I go to localhost in the web browser I'm able to see the default apache page. However when I create a php page it's just blank.When I look at the apache error logs I get this: PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
I've been searching alot on the internet and I know the issue is permission related, but I don't know how to fix it. I've seen some forum posts that say you need to use the chmod 775 command on the /var/www/html folder.Currently when I do ls -l /var/www/html it returns
-rw------- 1 root root 19 May 5 13:16 index.php
-rw------- 1 root root 19 May 5 13:15 index.php~
I'm sure that this isn't correct but like I said I don't know much about how to set permissions or who the owner needs to be. I've done alot of searching and seen similar posts, but no one seems to explain it clearly.
View 2 Replies
View Related
Mar 17, 2011
a client brought in an 160GB external HDD and wanted to get the files off it, there appeared to be no partitions on the disk but i thought it may have been formatted to use the whole disk. I tried to mount it as the various FS types the client thought it may have been to no avail.
I ran testdisk on it which told me that it previously had a mac partition table and a 210GB partition on it (which is larger than the disk) could anyone enlighten me as to whether or not this is even possible, and if so how could i retrieve the data?
View 2 Replies
View Related
Nov 12, 2010
Ubuntu 10.04, xsane 0.996, Brother MFC 240c scanner.I just finished writing a long dissertation on my problem with this scanning environment (which I will spare you). In a nutshell the resulting image, when printed, is smaller than the original document. In writing my dissertation for this post I determined that the cause of the issue is that xsane believes I am scanning an 8.5 x 14 inch document when I am in fact scanning an 8.5 x 11 letter. So the question is... can I change the size to 8.5 x 11? and if so, how? I have not found anything in the xsane Preferences.
View 7 Replies
View Related
Oct 22, 2015
today I upgraded via official testing repository Gnome to version 3.18. After this, icons on desktop and nautilus are bigger, than before. Next thing, gaps between icons are smaller than before. I tried change theme to default (Adwaita), then run gtk-update-icon-cache, but without result.
Normal view - icons are big for this view. URL....
Small view - icons are still big for this view. URL...
How can I change icons size and gaps size? Or is it bug for this version?
View 2 Replies
View Related
Jan 19, 2011
is lvresize with --resizefs options re-size the Logical Volume and then re-size the file system? i mean we don't need to use resize2fs?I looked at man pages but it doesn't explain this option.
View 3 Replies
View Related
Jun 8, 2011
Have just installed Lexmark s605 printer on wireless network, printer works ok but when i print a document even though it is showing the correct size on 'print preview', the printed output is on the page is tiny and and 90deg rotated, I've tried various drivers from the Lexmark website, and also messing about in printer settings but nothing seems to make any difference.
View 3 Replies
View Related
Dec 14, 2010
How can we find the maximum size of the inode table and what decides it, and how the maximum size of volume of file system is decided ?
View 4 Replies
View Related
Mar 21, 2011
I need a simplistic explanation of positional parameter. Have read all I can get my hands in, I kinds of understand to an extent, but I want to get. Full grasp of it. Oils like to know what is does, its functions, when to use it, and all its functions. Thanks in anticipation. Distro Red hat.
View 6 Replies
View Related
Apr 1, 2011
i have 2 front ends that receive traffic (http server) and should run some scripts in crontab, some of the scripts should just being running by 1 server at a time (active one) and others should run on both. Regarding the http like is load-sharing i think i cant use heartbeat, right? heartbeat is just for active-stanby or can we use to a active-active as watchdog? i have a cisco css to load sharing the http, and i can make a watchdog script to the apache. Regarding the cron crontrol i was thinking to make a script that replaces the crontab file to whatever is the correct one.
When the heartbeat start what parameter is sent to the script that are resources? a start if active node and nothing if is the standby?allways start?how should i config the haresources to do it? what is the best way? i have other situation that is making a nfs server in solaris 10, i have 2 servers with shared disks ( sun array), can i use heartbeat to this too? it is possible to make it in such way that if i had i failover in nfs server the clients doesn't need to reconnect?
View 2 Replies
View Related
Dec 28, 2010
It looks like the -t parameter is no longer available when using the shutdown command. What I'm trying to figure out is how to send all the daemons the kill signal, but wait a certain amount of time before actually halting or rebooting. I can't be the only one wanting to do this, but for all the searching I'm doing I can't find an answer.The following only warns, then waits 1 minute before sending the kill signal and immediately halting, correct? Or am I getting this completely wrong?
Code:# shutdown -h +1
View 4 Replies
View Related
Oct 11, 2010
i m using following kernal.
Code:
# uname -r
2.6.18-128.2.1.4.9.el5xen
According to security manual i need to incorporate following changes into kernal parameter but i m not sure when and how these changes will be implemented.
Code:
net.ipv4.conf.all.accept_source_route must be set to "0"
net.ipv4.ip_forward must be set to "0" (zero)
icmp_echo_ignore_broadcasts must be set to "1"
net.ipv4.tcp_syncookies must be set to "1"
[code].....
View 9 Replies
View Related
Feb 26, 2011
as $1 $2 represent first and second argument..for example- in a shell script..../commfile file1 file2 file3 now in commfile i want to receive files by running a loop...like
for (i=1;i<$#;i++)
do
cat ${i} //help me here
echo do u want to proceed
[code]....
View 9 Replies
View Related
Jun 11, 2010
If I have the following links in HTML
Code:
<a href=lang.php?lang=cymraeg>Cymraeg</a>
<a href=lang.php?lang=english>English</a>
and lang.php has a link to page2.html, how do I pass on the value of the lang parameter from lang.php to page2.html? The value needed is the one passed in to lang.php.
View 3 Replies
View Related
Aug 22, 2009
While doing 'yum update' an error message was issued during clean up phase:
Code:
Cleanup : elfutils-libelf-0.141-1.fc11.i586 110/180
ERROR: Module uprobes does not exist in /proc/modules
Cleanup : systemtap-0.9.9-2.fc11.i586 111/180
Does this represent some kind of problem or can I just ignore it?
View 3 Replies
View Related
Jan 24, 2010
I have just installed fedora 12 on my toshiba L355D-S7901. While updating my system using the graphical tool I encountered what the system labelled a 'bug'. The following details accompanied the error message:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
[code]....
View 5 Replies
View Related
Apr 14, 2010
when I want to add a new applet (e.g. the Brightness Applet) to my panel in Lucid (10.04) I get the following error:
Code:
The panel encountered a problem while loading "OAFIID:GNOME_BrightnessApplet". This happens with all applets. This error also appears when after the login. It's quite annoying to not have a clock, tray area and a window list. I searched in different forums but didn't find a solution.
[Code]...
View 3 Replies
View Related
Mar 3, 2011
while start following some tutorials, i face lot of problems only with nvidia-driver.for example, if i try to apt-get install chkconfig, the result will be as below:
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
View 12 Replies
View Related
Oct 28, 2010
I encountered these errors after i run make:
View 2 Replies
View Related
Nov 7, 2010
I recently rebuilt my system and did a fresh install of Ubuntu 10.04. Now, everything I try to install returns the following errors. I have tried installing the troubled packages but I get the same errors. Any thoughts?
View 2 Replies
View Related
Apr 23, 2011
I am familiar with bash, but my works require csh. in my .cshrc, I created this alias:alias cd 'cd !:1; ls -l' It works very well except for one case: when I cd without any parameter:
cd In which case, I get the "Bad ! arg selector" error. How do I eliminate this error?
View 1 Replies
View Related
Mar 4, 2010
Let's start with some context: About a week ago, I saw in the university computer that the text mode consoles(ctrl+alt+f[n]) worked with a great resolution on a 19" wide screen (I think it is 1440x900) running fedora 11. So I wondered if I could make the text consoles at home to work with a good resolution also.So I started to search for that and found the kernel parameter vga= . The problem: it doesn't support 1440x900 or any other 16:10 resolution for my graphic card. Then I thought that maybe fedora uses some module that allows that, because the livecd allows a good resolution (by default) on my desktop computer.
What I thought so far is that fedora is not using vesa for the virtual console (which i think is the driver that ubuntu uses) and I want to know what driver it is and how to use it in ubuntu (either compiling the kernel or simply installing something).I don't even know if my guesses are right or not. But I've gathered some info so far:From /var/log/messages (fedora 12 livecd) I got this part, which I think is the really interesting one.Quote:
Mar 2 22:37:18 localhost kernel: [drm] Initialized drm 1.1.0 20060810
Mar 2 22:37:18 localhost kernel: [drm] radeon defaulting to kernel modesetting.
Mar 2 22:37:18 localhost kernel: [drm] radeon kernel modesetting enabled.
[code]...
View 2 Replies
View Related
Apr 16, 2010
I have not dug into Ubuntu for almost a year now (Since Jaunty, really). I am trying to come to grips with Grub2, but have just now encountered it in Lucid. I am having a terrible time with the graphics chipset, and it may well be that Ubuntu cannot be used on this computer (an older laptop with the dreaded Intel 82845G graphics chip). There are a number of older bug reports that it is unsupported, but some success in more recent versions.
Anyway, one suggestion has been to add i915.nomodset=1 to the kernel boot line. Now, this was a cinch in Legacy Grub, but I have been reading Grub2 wikis and tutorials for two days now, and I know about the config files, but I cannot find anything which tells me specifically how to add a parameter to the kernel boot line.
View 2 Replies
View Related
Jul 31, 2010
Code:
a=/this/is/a/dir.txt
dirname $a
[code]....
View 2 Replies
View Related
Jan 23, 2011
There are several boot parameters shown when pressing the F6 key on the Ubuntu Maverick Alternate install CD. For example: ACPI=OFF
NOAPIC
NOLAPIC
NOMODESET
EXPERT MODE
Where do I find a "complete" explanation of what these parameters do, when it is appropriate to select them and HOW to select them?
View 8 Replies
View Related
Jul 9, 2010
I have a small board that has a static ram board attached to it. I have two different programs that each write to a byte of memory in the static ram board. I get a file descriptor to the device memory with the following code:
int phymemfd;
phymemfd=open("dev/mem, O_RDWR | O_SYNC);
This opens the physical memory for both reading and writing. Next I get a pointer to the beginning of my ram board.
volatile unsigned char *novram;
novram = (unsigned char *) mmap(0, getpagesize() * 31,
PROT_READ|PROT_WRITE, MAP_SHARED, phymemfd, 0x11AA0000);
I do this same code in two processes that are both running and this works fine. Now, if I take out the O_SYNC parameter, one of the programs gets into some sort of weird state.My understanding of the O_SYNC parameter is that it cause the process accessing the memory location to block, not allow another process to run, until the first process has finished writing to it.I can see that if my program doesn't block, I wouldn't really know what was in the memory location, but would I can't see how it would cause any other type of system problem.
View 1 Replies
View Related
Aug 4, 2010
I recently enabled noapic on my laptop because it was experiencing strange input freezes on several distros that I tried.Ok, so it does not use the ioapics. My question is, what does this mean for the system? If it used apics before, what happens now? I am a freshly graduated computer science major, and I have worked with basics pics on projects before, but I am curious how this effects the running system.
View 2 Replies
View Related
Apr 20, 2011
I have a "Chicony 1.3M UVC Webcam (Asus G1S notebooks)" webcam, which is supported by Linux UVC [1]. However I'm unable to find the kernel parameter that I should select to compile my kernel to support this device.
View 1 Replies
View Related
