I am a Mepis 8 user and I use Thunderbird to access my Gmail account. I can receive mail (pop3) no problem, but the SMTP server is not found, so I can't send Emails unless I log in to Gmail. It's especially confusing as I have the exact same setup on the WinXP box and it works perfectly.
View 6 RepliesI was wondering that if its possible to send mail using my own localhost mail server, I guess I made the settings using yast2. I am not sure that I did right setup. And if I did setup my mail server correctly.
View 1 Replies View RelatedIn trying to set up SMTP for Thunderbird, I made a mistake in the password, typed the wrong one in, and hit the checkbox to have Lucid remember it. Now it will report a password failure BUT won't allow putting a different password in.
Does anybody know if that password storage is managed by Lucid's keyring system, or Thunderbird's? In either case, where is that bad password located so I can clear it out?
I have a new 10.04 installation with thunderbird 3.04.This is on my wife's computer which is recently converted from windows XP where she used thunderbird as well.We use for the SMTP server - my own linux workstation, and used the same on her windows XP setup. Never had any problems. I am now having problems. I've tried every ****in' combination to no avail.So here are current settings:Server name: 192.168.1.3 -just as was with the Win XP setup.port 25 select User name and password. User name is entered. "use secure authentication" is unchecked.When I attempt to send I get the following:Sending of message failed.An error occured sending mail: Unable to authenticate to server 192.168.1.3 etc. etc.If I uncheck 'Use name and password', I get the following error message (in part)Relaying denied.so I'm stumped with all of these options, I've also tried secure authentication with similar problems.
View 1 Replies View RelatedI have two accnts in Thunderbird 3.1.10 in Lucid 64bit - gmail and itt-tech.edu (smtp.live.com). I removed apparmor because of the bug not allowing the file system to be mounted. I can send via gmail, not smtp.live.com. Smtp settings are correct. Any security package setting that might be hindering this mail send action?I have UFW installed.
View 1 Replies View Relatedi had configured mail server in linux. i had configured sendmail in linux client . i have error while sending mail through thunderbird smtp auth error how can i resolv the issue .....
View 1 Replies View RelatedHow can I verify if TLS is working for SMTP? I can see when I connect to Dovecot via IMAP4, a TLS session is present but I don't know to configure TLS for SMTP (sending messages).
View 5 Replies View RelatedI've got a server running 9.10, and I'm having a few issues with SMTP. It's got Postfix and Dovecot installed, and eventually I'll add content filtering, but I need to get past this issue first.
I know there's a lot of posts out there for Postfix issues, but I haven'tbeen able to find one specific to my issue.
IMAP and POP3 work fine through SSL, and the server can send mail without any problems. That's all fine and dandy, but I need to utilize an e-mail client (like evolution or outlook). Everytime I set up a user in Evolution, the smtp connection times out, or is refused. I know it's not a firewall issue. Port 25 is open, as well as 465. So I should be able to connect through SSL. I want to be able to connect through SMTP using the same credentials as IMAP.
Here's my main.cf file:
Code:
myhostname = mail.adamwgay.com
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
[Code].....
everytime I get things rolling, this issue pops up. I don't know if it's something I'm setting up wrong in the client, or if it's a configuration error on my part in postfix.
I'm also having a bit of an issue with my aliases. I've basically got a lot of addresses going to root, then root going to the main user, but it's not actually delivering the mail to the main user. It sends it straight to root.
I have a sendmail daemon running on Linux, I can telnet @ port 25 from local shell, however if I telnet from a remote system @ port 25, it doesn't work. There is no firewall in between.
View 3 Replies View RelatedInstalling PHPMailer v.5 (server running php5) with SMTP function. I have installed the main files in mail directory such as: # class.phpmailer.php: This is the main class file which contains the various email functions.# class.smtp.php: This additional class allows SMTP authentication.I don't think I need class.pop3.php as I'm sending mails server side (smtp)and should be accepted by most IP's pop3 servers.
All my mail functions work great with SMTP and I can send and receive. My problem is that my recipients only receive mail from admin@domain instead of "My Website Name" Sounds simple enough, I know and I have made adjustments to class.phpmailer.php and have inserted my specific mail attributes for my site such as mail address, mail from, smtp server, user/pass for smtp,etc.PHP Mailer v5.0 class.phpmailer.php is a very long script and I only found a couple of places to put the FROM address as follows:
PROPERTIES,
PUBLIC
/////////////////////////////////////////////////
/**
*
Email priority (1 = High, 3 = Normal, 5 = low).
[code]....
In order to have greater control over the emails sent out the company I imagined the following scenario.ScenarioDescribing in words what I need.ser sends an email to user@hotmail.com for example, using the smtp of my isp (is the internet).Before the email is sent, the firewall checks if the recipient is blocked transparent, if you are locked out rejects the email.I searched several forums and mailing lists, but did not find scenarios similar to mine.Where found situations in which the mail servers were internally in the company, which is not my case.
View 2 Replies View RelatedWe have Ubuntu 8.04 running on our mail server and remote smtp connection does not work.
When trying to send with a client such as Thunderbird it complains about a wrong usernamepassword.
Receiving mail with IMAP and POP3 works fine through Thunderbird. Both receiving and sending mail through a web interface(horde) works.
I can remotely telnet the server at port 25 and this is the output of ehlo:
Code:
250-**server address**
250-PIPELINING
250-SIZE 25000000
250-VRFY
250-ETRN
250-STARTTLS
250-AUTH PLAIN LOGIN
code....
All of a sudden, when I click on a link in Thunderbird, nothing happens, where it used to open a tab in Firefox. Left clicking and selecting "open in browser" also doesn't work.I checked in Firefox to make sure I had it set as my default browser, but when I click on an html file it opens in Konquerer. Is there another setting I should change?
View 1 Replies View RelatedI can not make the upgrade from 3.11 to 5 load. When I run it from the terminal this is what I get code...
Does anyone recognize what I should do to get TB working?
thunderbird not working after upgrade I finally got around to doing some more testing after I upgraded from Ubuntu 9.x to 10.x and now Thunderbird wont work right. It wont let me see the messages correctly. its slow and takes forever to load. I cannot read mail or switch between accounts easily any more. Do i need to remove it and reload? Will I lose all my email and my account settings?
View 3 Replies View RelatedI finally got around to doing some more testing after I upgraded from Ubuntu 9.x to 10.x and now Thunderbird wont work right.
It wont let me see the messages correctly. its slow and takes forever to load.
What do i need to do to correct this?
Do i need to remove it and reload? Will I lose all my email and my account settings? Anyone else have issue with Thunderbird after upgrading?
Ive tried both Evolution and Thunderbird email, and i prefer Thunderbird, and they wont work, they wont retrieve my email from my email account (yahoo email) or even find the password and username right. Plz help, its kinda irritating.Ive also tried out Empathy IM and it wont work finding my facebook chat account, i havent tried it with anything else yet but its just not connecting.It says theres a network problem or the problems coming from facebook.
View 9 Replies View RelatedI am using Fedora 12 and Thunderbird 3.0.4 version I am trying the connect it to the IMAP server but it does not work (no authentication).
- IMAP with SSL
- SMTP with none
Though it works for other email client (Evolution). I there a problem with the thunderbird itself or am I missing something special to configure that I dont know of?
So, approx 2 weeks ago, clicking on links in Thunderbird stopped working. There is no response in the browser whether it is open or not. I am able to paste the links to the browser just fine. Being congenitally lazy, I would rather just click them. I have upgraded to the latest version of Thunderbird and have the same issue. I have tried using Swiftfox, Firefox and Opera - all give the same non-response.
Am not getting any error messages, the links just do not open. Can't find any settings relevant to this issue.Any bright ideas out there?
I have a domain name registered in asianet.com, they provide email service also, can i use local mail server and registrar's smtp server at same time?
View 5 Replies View RelatedWhen the update on Open Suse 11.2 is going to happen for Thunderbird version 3. The current version (links don't work to open on default browser.
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.5)
Gecko/20091130 SUSE/3.0.0-1.1.1 Thunderbird/3.0
Instead of upgrading to 10.10, I decided to install everything from scratch. Since the installation I can't make Firefox and Thunderbird work with the profiles I have always used on an NFS share. Locally Everything seems to work fine, but when I use the profiles on my NFS server I get in trouble. With Thunderbird I can read the email that is already there, but I can't get new one. It seems to hang during the connection. I can also write Drafts, and save them. RSS seems to work too. With Firefox I get the error "the bookmark and history system will not be functional because one of Firefox's files is in use by another application". When I try to open a url it doesn't work. Both applications start very slowly, but only when I open the profiles on the NFS share. I can happily read and write files on that share, so it can't be an access problem. I have a 64 bit machine, and I am using the Firefox 3.6.11 32 bit that I downloaded separately. Thunderbird is the one coming with the distribution.
View 1 Replies View Relatedhow to get Lightening working with Thunderbird on a 13.1 multilib system.
View 3 Replies View RelatedI am running CentOS 5.5 and am trying to get Nagios to send out Emails.
After a bit of reading I have the following in my /etc/mail.rc file:
Code:
[root@linux ~]# cat /etc/mail.rc
set ask askcc append dot save crt
ignore Received Message-Id Resent-Message-Id Status Mail-From Return-Path Via
set smtp=172.29.1.76
You have new mail in /var/spool/mail/root
[root@linux ~]#
I have Nagios setup correctly and introduced an error to generate an Email but nothing has come through.I suppose I have two questions:
1. Is mail.rc setup correctly?
2. Can I test to see if mail.rc is working correctly?
Code: Warning: fsockopen() [function.fsockopen]: SSL: Success in /var/www/krai/class.smtp.php on line 105
Warning: fsockopen() [function.fsockopen]: Failed to enable crypto in /var/www/krai/class.smtp.php on line 105
Warning: fsockopen() [function.fsockopen]: unable to connect to ssl://smtp.gmail.com:465 (Unknown error) in /var/www/krai/class.smtp.php on line 105
Those 3 errors popups when i chroot my webroot dir, without chrooting it works fine and email is send.
I had a portable apps version of Thunderbird (windows) that runs off a thumb drive and wanted to take the settings and transfer them to my Thunderbird that's on my Linux computer.
This is what I did:
First, I installed thunderbird on my Ubuntu 10.04 Linux box and opened it, and closed it (so that it would create the /home/<username>/.thunderbird folder in the user account).
Then, I renamed the linux /home/<username>/.thunderbird folder to .thunderbird_ORIGINAL
Then, I created a new /home/<username>/.thunderbird folder
Then, I took the windows e:ThunderbirdPortableDataprofile folder and copied it to the /home/<username>/.thunderbird folder.
Then, I looked into the /home/<username>/.thunderbird_ORIGINAL folder and wrote down the name of the folder with the ".default" extension.
Then, I renamed the profile folder (that came from the windows e:ThunderbirdPortableData folder) "<name-I-wrote-down>.default".
And then, I copied the profiles.ini folder from /home/<username>/.thunderbird_ORIGINAL to the /home/<username>/.thunderbird folder.
I opened up Thunderbird in Linux and everything seems fine! (I'll definitely be keeping a backup just in case)
My question is: is this fine and dandy, or a recipe for disaster?
Thanks to Lucid not working properly on i845, i855 and other 8xx chips, had to re-install Karmic on my mum's computer.I saved all the data from her old install and I ve managed to get all her old emails from thunderbird, but I cant import her address book.In Thunderbird/tools/import/addressbooks it only allows importing of LDIF, .tab, .csv and .txt files, but I cant find any of these files in any of the Thunderbird, .Thunderbird, Mozilla-Thunderbird or Mozilla folders in Home folder or anywhere, all I can find is "abook.mab" which IS supposed to be her address book, but when I try and import it the entries are blank and/or indecipherable (prob cos not a compatible file type).
Its one of those "simple" things to do, thats taken hours and hours of time, but that I cant actually find out how to do.
I run version 10.04 GNOME. My problem is (after substantial searching) that I need to have both users ('juliusz' and 'sarah') running Thunderbird but with the same profile (settings, email, accounts etc. preferably of 'juliusz'). The only results on the internet are share Thunderbird between Windows and Ubuntu.
I have two users juliusz and sarah. I need either of them to have the same profile, always in synch whenever they logon to own account. When I tried to edit sarah's /home/sarah/.mozilla-thunderbird/profile.ini by inserting: Path=/home/juliusz/.mozilla-thunderbird/xxxxxxx.default after i run Thunderbird for 'sarah' I get message: "Thunderbird is already running, but is not responding. To open a new window, you must first close the existing Thunderbird process, or restart your system." I checked with "ps aux" there is no Thunderbird running in sarah's session. There is no Thunderbird running in juliusz's session when I reloged to juliusz.
I have installed 11.4, and it seems (seemed) to work OK so far. I installed Thunderbird via the opensuse "1 click install". the installation ran smoothly, but now a click on the Thunderbird icon does not activate any mail client; the only success is that Thunderbird icon jumps joyfully and then disappears.
View 9 Replies View Relatedis that my isp's smtp service is very poorso i want to configure my own smtp servr for my internal clients only for sending emails not receivingi have static ip on my router with 25 port forward i have configure sendmail on linux its working fine on local network mean its sending email on local domainnow i want to send emails on other external domains with my public ipMean user of mydomain.com should be able to send emails on all internet domains like yahoo.com, hotmail.com etc
View 8 Replies View Related