Software :: The Volume "Boot" Has 0 Space?
Feb 27, 2011When I boot up my PC which is running Ubuntu 10 I get an error message.
The volume "Boot" has 0 space.
ADVERTISEMENT
Software :: Error - The Volume "Boot" Has 0 Space
Feb 27, 2011When I boot up my PC which is running Ubuntu 10 I get an error message. The volume "Boot" has 0 space.
View 12 Replies View RelatedFedora :: Managed To Reduce The Logical Volume To Free Some Space But Cant Seem To Reduce The Physical Volume
Jan 1, 2010so i have f12 installed on my hd with lvm using the whole extent of the HD , i want to reduce it so i can dual boot it with a windows system, i managed to reduce the logical volume to free some space, but i cant seem to reduce the physical volume, is this possible and how ?
View 2 Replies View RelatedProgramming :: Finding Available Space In A Volume?
Nov 15, 2010Given the name of a mounted volume (e.g., /mnt/vol), how would I determine its capacity and available space in C? I've been googling for a while now and nothing jumps out as the solution. I can use getmntent() to get the name of the actual partition that is associated with the mount point, e.g. /dev/sda2, but I can't figure out how to find the capacity of the volume nor how much space is remaining, such as what the df command shows. Is there an ioctl defined to get this information or some other system call?
View 1 Replies View RelatedFedora :: Root Logical Volume Ran Out Of Space?
Nov 13, 2009 My computer: (Lenovo T61 Thinkpad, running fc11 for about 2 and half months). Apparently I when I made my partitions I didn't leave quite enough room in my root directory, because I just completely ran out. Here is how my hard drive is partitioned:
1 physical volume group (sda)
4 logical volumes (home, root, swap, var)
The root had about 15 gigs on it, which just filled up. When I restarted to see if that would help, when it rebooted it went fine up to the log-in screen. Instead of the usual fedora blue background, it was black except for the log-in window, which looked very low-res. A little pop-up kept coming up saying the GNOME power configuration settings failed to load or something. When I logged in, the whole screen was black except for the mouse, and I could get no response. I have plenty of space left in home, so I rebooted to rescue mode using the first fedora installation disk, and tried the following command:
Code:
lvreduce -L90G /dev/mapper/DRIVE
which only returned:
Code:
lvreduce: relocation error: lvreduce: symbol dm_tree_node_size_changed, version Base not defined in file libdevmapper.so.1.02
So I couldn't reduce the size of home, and thus couldn't increase the size of root.
IN SUMMARY:
a) the lack of memory in root the probable cause for my computer not working
b) there a good way to reduce home and increase root while running this live disk
Note: When I am looking at it now in the logical volume manager, it says that on the whole physical volume there is only 400MB free. However, when I last looked (about 30 mins before I started having problems) it said there were about 100 Gb free.
Edit: Nevermind. I did some more research and it turned out to be more of a gnome power manager thing rather than a memory space thing, although I'm certainly going to increase my root memory now.
Server :: Identifying What Is Using Up Space In Logical Volume?
Jun 14, 2010I just read and learned about logical volume management today. I have a server running RHEL5.4, LVM2. I have 1 physical volume, with one volume group, and 3 logical volumes. I have no free extents, nor do I have any in my volume group (not sure if it's possible to have free in one and not the other anyway), and I am running out of space on one of my logical volumes. Doing a df -h shows 96% of 9.7GB used on /dev/mapper/MainVG-root, mounted at /. So here's the stupid question: how can I find out what directories/files are taking up what space within this logical volume? As I said I have 3 all together, and the other 2 are mapped to /var and a /var pgsql sub-directory. I figured I could get the sizes of the other directories under / and drill down accordingly, but I seem to be missing some basic rule because the commands I am using and the values I am getting don't add up.
For example, it seemed logical to me to do an ls -lsh on / to try and identify the largest directories. Each directory is listed as being ~4-8K in size. That doesn't make sense to me. So I decided to do a du -sh on each directory. Having done this on all of the / sub-directories and added up those values, there is not enough reported usage here to equal 8.9GB of used space (as df -h / reports).how they would find out how the 9.7GB here is being allocated? Preferably without scripts as I am not ready to add a layer of complexity to this yet without understanding some fundamentals.
Ubuntu :: Volume Icon Taking Up The Space Of Two - Resize It Down?
Sep 13, 2010Ubuntu 10.04.1 I was just tidying up my panel when I notice the Volume icon is taking up the space of two icons: I can right-click and Move it to the left or right
View 6 Replies View RelatedUbuntu :: Possible After OS Is Installed To Configure Space As One Logical Volume?
Jun 2, 2010HPDL385 with dual raid controllers (8 disks each). During the install of the ISO, it sees the raid controllers individually. I tried "One Generic Drive" but it still only partitions one of the raid controllers.Is it possible after the OS is installed to configure the space as one logical volume?
View 3 Replies View RelatedGeneral :: LVM - Adding New Disk Space To Volume Group?
Feb 7, 2011I plan to install a server using LVM. I thought a partition schema where /boot would be in an ext4 partition while / /usr /var /home and /opt would be in the LVM. My question is: if I'm putting / into the LVM, is it necessary to divide /usr /var /home and /opt into different logical volumes? If I divide them, would it become harder to maintain when new disk space has to be added to the volume group?
View 7 Replies View RelatedSoftware :: Extend Physical Volume Disk Space From One To Another?
Sep 16, 2010Is is possible to extend physical volume disk space from one to another?
Quote:
PV VG Fmt Attr PSize PFree
/dev/sda1 Zeus-extra lvm2 a- 149.05G 17.05G
/dev/sdb1 Zeus-misc lvm2 a- 394.96G 274.96G
Could I get 50GB from /dev/sdb1 and add it to /dev/sda1 ???
Ubuntu :: Dual Boot Linux / Change Drive Space Configuration For More Space
Mar 6, 2010I have linux and windowsxp on one machine. I have only 3gigs free on the windowxp machine and 20gigs free on the linux machine. I want to transfer space from the linux box to the windows machine.Is this possible and what steps would I need to follow to do this?
View 1 Replies View RelatedUbuntu :: Volume Filesystem Root Has Only 25mb Space Remaining
Feb 28, 2011I'm getting an error message that something along the lines of "volume "filesystem root" has only 25mb space remaining". How do I increase the volume size so I never have to worry about it again? This is the 3rd time I've tried ubuntu and it's sticking more and more but this has me thoroughly perplexed. I've got a 320GB HDD partitioned 3 times with a Linux partition being 7GB.
Dual booting Win7Pro.
Running ubuntu 10.10 64-bit
Ubuntu :: BleachBit - Can't Wipe Free Space / Get This Volume Wiped?
Jul 1, 2011I have a 500 GB hard drive connected via a SATA/USB adapter. After connecting it, I did a basic format of the drive with no problem. I then attempted the "Wipe Free Space" option under the File menu in BleachBit, selecting the external drive, and it began the process. It gives me a time estimate of about 300 minutes, but, instead, after a few minutes it says "Done" and gives me the message "[Errno 27] File too large. Disk space recovered: 0 Files recovered: 0 Errors: 1"
What happened? What do I need to do to get this volume wiped?
Fedora :: The Volume File System Roots Space Is Decreasing?
Nov 18, 2010My fedora keeps popping up this message of Low disk space..the volume file system roots has only 200 MB remaining.Then it came to 150 MB and now to 100MB.I am using fedora 13 on vmware .I set my vmware hard disk to 20 GB... my file system is showing 100 MB free while my home has 12.3GB free. Is there a way increase the size of my file system. similar problem has been in ubuntu [URL] but I dont know what to do with fedora.Also can some one tell me the way I can increase the size of usr folder .so that I can get some more softwares.Right now I am just stuck.
View 5 Replies View RelatedSoftware :: Extend Volume Group Size Over The Remaining Space?
Mar 28, 2010extend the size of a LVM2 volume group over the remaining free space available on a physical volume. My linux box is a Ubuntu Karmic 9.10 64bit, the 60GB hard disk has 2 win partition for about 19GB, a 1.5GB ext3 boot partition and finally a 36GB LVM partition (/dev/sda4) on which I created a volume group (volgrp) smaller 10GB than the 36GB physical volume (/dev/sda4). What I want now is to extend the size of volume group up to the end of physical volume. I tried to use the "vgextend volgrp /dev/sda4" but system answers me
with following output:
me@pc:~> sudo vgextend volgrp /dev/sda4
Physical volume '/dev/sda4' is already in volume group 'volgrp'
Unable to add physical volume '/dev/sda4' to volume group 'volgrp'.
Here the output of fdisk command:
me@pc:~> sudo fdisk -l
Disk /dev/sda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
[code]...
CentOS 5 :: Df Not Showing Disk Space After Logical Volume Expansion / Fix It?
Jun 5, 2009I've added a new LUN to my Centos 5.2 server using Powerpath and have added it to an ext3 logical volume. I extended the logical volume using lvextend and the new space shows up correctly in lvdisplay. What I'm having problems with is getting Centos to see the new disk space (df -h shows 500GB, not 600GB as expected). I've tried running a resize2fs on the new volume but it tells me that "the filesystem is already n blocks long. Nothing to do". Does any one know where I'm going wrong? If possible I'd like to sort this without a reboot.
View 3 Replies View RelatedFedora :: Finding A Fstab Or The Terminal To Recognize The Space In Part Of The Volume Name?
Oct 18, 2009The space in the volume name seems to disagree with fstab and terminal, I can't change the volume name either as I do not have access to Windows at this time. Is there a way I can help fstab or the terminal to recognize the space in part of the volume name?
View 2 Replies View RelatedUbuntu :: Volume "filesystem Root" Has Only 474.8 MB Disk Space
Apr 25, 2010When I logged in today I got this message:
The volume "filesystem root" has only 474.8 MB disk space remaining
What does this mean??
Server :: Use System Monitor Via A VNC Connection The Free Disk Space Value Is 20GB Free On The Same Volume
May 18, 2011I've got a question on free disk space. I'm currently running CentOS 5.5 on in Xenserver virtual environment. We've had an issue with disk space. My question is as follows: - from a ssh connection i run df -h this gives the value of 90% used leaving me with 9GB. If I use system monitor via a VNC connection the free disk space value is 20GB free on the same volume. Which one is correct? I do use SNMP to monitor the same volume and should alert me when < 10% is free I know this works as I set the alert threshold to < 90% I get an alert.
View 2 Replies View RelatedUbuntu :: Swap Space Shows 0k But Have Volume Formatted As Swap
Dec 7, 2010Lucid on an Acer Travelmate800.Can anyone tell me why I have 0k for swap space? I allocated swap which I can see in my Disk Utility's 'volumes' display.
View 5 Replies View RelatedGeneral :: Division Of Logical Memory Space In To User Space And Kernel Space
Jan 4, 2010Logical Memory Space of 4GB is divided in to 3GB User Space and 1GB Kernel Space. Always. Correct?
1. How can we change it? (just changing value of PAGE_OFFSET is okay?)
2. If system have only 256MB of memory (embedded system) and suppose Kernel Modules eat away all the memory during boot. User space will be left will no memory. Is this case possible?
OpenSUSE Install :: Doesn't Boot GUI Workspace It Boot Into Text Like Space Named "Emerald - Kernel 2.6.31.8.0.1
Jan 31, 2010I got the serious problem after update my opensuse 11.2, after update the message appeared and said restart my machine to updates take effect and after restart system doesn't boot GUI workspace it boot into text like space named "Emerald - Kernel 2.6.31.8.0.1 - desktop (tty1)".What can I do to boot my machine into GUI again?
View 4 Replies View RelatedUbuntu :: No Volume After Boot
Feb 3, 2011I finally got the nerve to upgrade from 9.10 to 10.04. Got everything working except, when I boot, my speaker sound is all the way down. I run alsamixer from terminal, adjust speaker volume up and I'm ok until next boot. How do I set it to boot with speaker volume at last setting or all the way up?
View 3 Replies View RelatedSoftware :: Volume Boot Record Is The Same As MBR?
Oct 27, 2010If I have a HDD with 3 particions, I have 1 MBR at the begining of the HDD, and 3 VBR (volume boot record). One VBR for each partition in the begining of each partition. But what I dont understund is if first VBR in the first partition (512 bytes) are the same 512 bytes in MBR?
View 10 Replies View RelatedCentOS 5 :: Boot - Volume Group Not Found
Oct 5, 2010Before creating this topic I googled a lot and found lots of forum topics and blog posts with similar problem. But that did not help me to fix it. So, I decided to describe it here. I have a virtual machine with CentOS 5.5 and it was working like a charm. But then I turned it off to make a backup copy of this virtual machine and after that it has a boot problem. If I just turn it on, it shows the following error message:
Activating logical volumes Volume group "VolGroup00" not found Trying to resume from /dev/VolGroup00/LogVol01 Unable to access resume device (/dev/VolGroup00/LogVol01) ... Kernel panic ...! During the reboot I can see 3 kernels and if I select the 2nd one the virtual machine starts fine, it founds the volume group etc. (But there is also a problem - it can not connect the network adapters.) So, it is not possible to boot it with the newest kernel (2.6.18-194.17.1.el5), but it is possible with an older one (2.6.18-194.11...)
I looked into GRUB's menu.lst and it seems to be fine. I also tried #mkinitrd /boot/initrd-2.6.18-92.el5.img 2.6.18-92.el5 no luck! Yes, I can insert DVD .iso and boot from it in "linux rescue" mode.
OpenSUSE Install :: NTFS Volume Sometimes Not Mounted At Boot?
Sep 3, 2011I have a few NTFS volumes in my machine. The fstab looks like this:
Code:
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD322GJS2BJJ9EB609339-part3 swap swap defaults 0 0
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD322GJS2BJJ9EB609339-part4 / ext4 acl,user_xattr 1 1
[Code].....
Ubuntu Multimedia :: 9.04 (Dual Boot) - Low Output Volume
Apr 8, 2010I have a dual boot system with XP and Ubuntu 9.04. When I boot into XP the volume is fine, but when I boot into Ubuntu the output volume is half what it is in XP. I have to crank my stereo way up to get it to a decent volume. Is there any way to boost the output volume in Ubuntu?
View 2 Replies View RelatedUbuntu Multimedia :: Set Laptop Volume Control At Boot Up?
Nov 10, 2010how to set at least my headphone/lineout socket precisely to -15dB at boot up? If I knew how to make amixer commands permanent, I wouldn't be re-raising the issue
The Gnome GUI volume control is fine in normal circumstances but to set it accurately requires a bit too much fiddling, IMO - now if someone were to adjust the programming so a dB readout accompanies slider movement, rather than as a pop-up after adjusting the slider, 'twould be more ergonomic, IMO.
Red Hat / Fedora :: Boot Failure In 15 After Removing Unused LVM Volume?
Jul 18, 2011So what happened is i had a small encrypted lvm volume that i no longer need because I have bought an external HDD and used truecrypt on in. So after I transfer all the files off of the encrypted partition, I restart and drop into single user mode and remove the unneeded volume. When i attempt to restart, instead of going to the login screen, when the boot progress bar is full, it says "welcome to emergency mode: enter rootssword for maintenance or press control D for normal mode" or something along those lines. I tired control+D, but that just brought me right back to the emerengy mode screen. I put in my root password and tried startx, but then x gave me this error: "can not start D-bus, can you call q-dbus?". After that i tried both "service dbus start" and "dbus-launch", both of which failed. Is there any quick remedy to this situation, or do i have to reinstall
View 4 Replies View RelatedGeneral :: Boot Server With One Dirty Volume Not Mounting?
Mar 10, 2011I have a server that has 2 dirty volumes, both of which are very large. One volume contains live data, the other is just a rsync'd copy of that data, which isn't critical to the users. The e2fsck is taking forever in single user mode, so i'm wondering if there is a way after the volume with live data becomes clean from e2fsck fixing everything, if i can boot the server and have it skip mounting the other dirty volume (/dev/md1) just this once, so i can get the server up with the live data available to users. Then with /dev/md1 unmounted with the server up, I should be able to e2fsck that until it comes back clean, then do a mount /dev/md1,Please let me know how I could do this, I'm running RedHat if that matters. I'm quickly running out of time here,
View 5 Replies View Related