The space in the volume name seems to disagree with fstab and terminal, I can't change the volume name either as I do not have access to Windows at this time. Is there a way I can help fstab or the terminal to recognize the space in part of the volume name?
View 2 RepliesGiven the name of a mounted volume (e.g., /mnt/vol), how would I determine its capacity and available space in C? I've been googling for a while now and nothing jumps out as the solution. I can use getmntent() to get the name of the actual partition that is associated with the mount point, e.g. /dev/sda2, but I can't figure out how to find the capacity of the volume nor how much space is remaining, such as what the df command shows. Is there an ioctl defined to get this information or some other system call?
View 1 Replies View RelatedI just used dd to clone a linux partition to a new hard drive, it had 800mb left on the old hard drive, after dd, new hard drive lists 1.29/1.3 terabytes full. Is this what happens by default in dd? How can I fix this?
View 1 Replies View RelatedI have been using Ubuntu for about a year and I decided to switch to Fedora just to see how it goes with getting everything in my system working again. I would say that with Ubuntu and Fedora installations I have installed and reinstalled 15 times, which I mention because I am not new to installing linux. I have used GParted to partition and resize my HD numerous times and reinstalled linux on a partition and so on. I know how to do all of that without any problems.
NOW HERE IS WHAT HAPPENED... I installed Fedora on my Desktop which I had partitioned into a 190 GB partition onto which Windows is installed and then I had another 30 GB partition onto which I chose to install Fedora. I chose the "replace existing Linux systems" in anaconda... and what resulted was a 30 GB partition with Fedora that is now showing up as LVM. I have never seen an LVM partition and I am not sure if I can use GPARTED to resize it without destroying it. I have used GPARTED to resize Linux partitions before, but they were never showing up as LVM. The forums on GPARTED only show info from about a year or two ago.
Here is what I want to do (and reading around on forums doesn't really give a good explanation of whether it is possible)... Is it possible to install Linux Mint into that 30 GB Fedora LVM partition by just resizing the Fedora part of the volume? So, the question is this: How can I resize the Fedora part of the LVM volume and then install Mint into that LVM partition?
If Fedora was on an ordinary 30 GB partition I would have no problem with using GPARTED to chop that in half and then use the 15 GB I freed up to install Mint. I just don't want to destroy the Fedora stuff by messing around the with the LVM partition so I would like to hear from others who have worked around this issue and please don't link to the ordinary LVM howto's you get through a simple google search as I have already read them and I don't find them too illuminating.
so i have f12 installed on my hd with lvm using the whole extent of the HD , i want to reduce it so i can dual boot it with a windows system, i managed to reduce the logical volume to free some space, but i cant seem to reduce the physical volume, is this possible and how ?
View 2 Replies View RelatedGateway m275 laptop with builtin smartcard reader. I've done modeprobe - <mmc module of all types> after having removed modprobe.conf file. I see that there is a pcmcia rules, Do I add all modules to this list so hat it can be probed. Once pccardctl is working, how do I find the volume and mountit or set fstab to create the mount point or to have it automatically mounted in media.
View 1 Replies View Related My computer: (Lenovo T61 Thinkpad, running fc11 for about 2 and half months). Apparently I when I made my partitions I didn't leave quite enough room in my root directory, because I just completely ran out. Here is how my hard drive is partitioned:
1 physical volume group (sda)
4 logical volumes (home, root, swap, var)
The root had about 15 gigs on it, which just filled up. When I restarted to see if that would help, when it rebooted it went fine up to the log-in screen. Instead of the usual fedora blue background, it was black except for the log-in window, which looked very low-res. A little pop-up kept coming up saying the GNOME power configuration settings failed to load or something. When I logged in, the whole screen was black except for the mouse, and I could get no response. I have plenty of space left in home, so I rebooted to rescue mode using the first fedora installation disk, and tried the following command:
Code:
lvreduce -L90G /dev/mapper/DRIVE
which only returned:
Code:
lvreduce: relocation error: lvreduce: symbol dm_tree_node_size_changed, version Base not defined in file libdevmapper.so.1.02
So I couldn't reduce the size of home, and thus couldn't increase the size of root.
IN SUMMARY:
a) the lack of memory in root the probable cause for my computer not working
b) there a good way to reduce home and increase root while running this live disk
Note: When I am looking at it now in the logical volume manager, it says that on the whole physical volume there is only 400MB free. However, when I last looked (about 30 mins before I started having problems) it said there were about 100 Gb free.
Edit: Nevermind. I did some more research and it turned out to be more of a gnome power manager thing rather than a memory space thing, although I'm certainly going to increase my root memory now.
Whilst in fedora i deleted files off my second hard drive to free up some space, i deleted over 10gb worth of data. When booting back in to my windows partition it doesnt recognize the free space instead it thinks the hard drive is still full even though i deleted the data.Not to sure as to why this has happened, as im sure i have deleted stuff of this hard drive before from my linux partition.Any help would be greatly appreciated as my 70gb hard drive is full with only 20gb of data to show for it
View 2 Replies View RelatedMy fedora keeps popping up this message of Low disk space..the volume file system roots has only 200 MB remaining.Then it came to 150 MB and now to 100MB.I am using fedora 13 on vmware .I set my vmware hard disk to 20 GB... my file system is showing 100 MB free while my home has 12.3GB free. Is there a way increase the size of my file system. similar problem has been in ubuntu [URL] but I dont know what to do with fedora.Also can some one tell me the way I can increase the size of usr folder .so that I can get some more softwares.Right now I am just stuck.
View 5 Replies View RelatedIs there a way to default volume to 100% in the terminal with gnome-volume-control-applet or any other program? I am setting up a dedicated Zsnes machine which boots into Fluxbox but the volume is muted by default. There isn't a man page for gnome-volume-control-applet.
When I log into Gnome the volume is set to 100%, but Fluxbox is always set to mute.
I have been using Fedora 11 for some time and I ran into a major problem today. I had installed some packages by yum (especially bacula-related) and erased them. Now I can't use gnome-terminal as root. Quote:
[webman@localhost ~]$ su -
Password:
su: incorrect password
The password is correct, but it is not accepted as such.
I have a dd image of a full drive (as a file) that was using Truecrypt system encryption under windows. I want to mount the main partition from that image using Linux's Truecrypt. I am familiar with dd loopback devices and have the partition offset, but I don't know how I can mount it like this because I need to use the truecrypt command.
Is there perhaps some way to create a fake device file for the disk image that I can mount from within Truecrypt?
anyone knows of a software to take a snapshot of part of the screen and save it as a pdf file. I have KSnapshot installed but this only allows saving image files.
View 2 Replies View RelatedWhenever I install Fedora other distros don't show up in GRUB. Windows shows up in "other," and I can see the other distro still intact when I run G Parted, but I don't know how to get it to show up in GRUB. Is there a terminal-command in F14 that probes other OS's on the hard drive and restores them to GRUB?
View 6 Replies View RelatedHow do you change the volume of the terminal alert bell in F11? (the sound you hear when you press the tab button). I turned the sound all the way down and muted the "Alert volume" in System>Pref>Sound but I still get a deafening bell sound whenever I press the tab button.
View 8 Replies View Relatedhow easy it would be to read the contents of a physical disk that was part of a larger logical volume. The disk contains a "Linux LVM" partition that spans its entire size. My problem is that one of my disks died, and I have to send it back for a warranty replacement. However, the disk is dead, and I can't zero it out. I'm just trying to assess how difficult it would be (or at least how likely it would be) for a tech that's checking out the disk to get at the data.
View 4 Replies View RelatedA part of the disk space is unavailable: Only 37 GB out of 80GB is accessible A part of the disk space is unavailable: Only 37 GB out of 80GB is accessible. I have a vmware instance of CentOS setup with 80GB of Hard Disk space ( Preallocated). When I login to the system I only see 35 GB.
[Code]...
I've dual booted Ubuntu and Windows for years now and I've installed OSx86 on a separate drive which Grub2 picked up automagically and everything has been working great -- except I'm out of space. So I bought a 1.5 TB drive and installed win7 into sda1 (100MB NTFS bootloader for windows) and sda2 (50 GB NTFS windows drive). I now want to install two or three flavors of Linux. I'm thinking Ubuntu 10.04, Debian 5.05, and (if I'm bold enough) gentoo. each in 50GB partitions. I've already partitioned the drive a bit putting a 1.2 TB shared NTFS partition at the end (sda10), and a 2 GB swap parition just before that(sda9) My questions are:
(1) can all my linux distro's share that 2GB swap, or does each need it's own dedicated swap partition (installers generally assume you do)?
(2) can I re-partition space in the middle of the drive without messing with windows(sda1&2) and the shared part. (sda10)?
I have a raid 5 array formatted with ntfs; My Ubuntu OS is not able to recognize the raid 5 array but my windows 7 OS can. I had this working before when I installed ubuntu via wubi but now since i installed it as a dual boot OS I am having issues trying to mount this raid 5 volume. So far i have tried reinstalling the dmraid, ntfs config manager, and storage device manager however nothing seems to help me recognize my raid 5 array.
P5N32 E-SLI PLUS MOTHERBOARD: RAID 5 ARRAY NTFS with NVIDIA's raid chipset that comes built in with motherboard.
creating a mailing list I need a software that can do that. Other formats like txt or rtf would be great too, as I can easily convert.
View 4 Replies View RelatedI have linux based photo editing software that I want to install so that it can be accessed through the Applications menu. Which system folder do I install it in? Or what terminal commands do I use to install so it is part of the system?
View 5 Replies View Relatedit says cant mount volume and wont recognize my seagate expansion drive after I had the seagate plugged in to a windows pc! It says something about using command line to fix it but I'm new to Linux and don't know what to do!
View 1 Replies View RelatedI have access to a Linux machine (CentOS 5.6) hat doesn't have a physical terminal. From what I've seen before, it's a cluster with racks of nodes. I SSH into the system to access it.I broke the fstab file, and the system is not coming up. I need to fix this ASAP, but:1. There is no lab admin to help me for at least a week.2. I may get not more than 2 hours inside the lab to fix this.Is connecting a keyboard and a monitor the only way to fix this problem (I'm guessing I may also need a live CD.) ? Are there other ways to fix this so that I can be prepared for it before my limited time window inside the
View 3 Replies View RelatedI just read and learned about logical volume management today. I have a server running RHEL5.4, LVM2. I have 1 physical volume, with one volume group, and 3 logical volumes. I have no free extents, nor do I have any in my volume group (not sure if it's possible to have free in one and not the other anyway), and I am running out of space on one of my logical volumes. Doing a df -h shows 96% of 9.7GB used on /dev/mapper/MainVG-root, mounted at /. So here's the stupid question: how can I find out what directories/files are taking up what space within this logical volume? As I said I have 3 all together, and the other 2 are mapped to /var and a /var pgsql sub-directory. I figured I could get the sizes of the other directories under / and drill down accordingly, but I seem to be missing some basic rule because the commands I am using and the values I am getting don't add up.
For example, it seemed logical to me to do an ls -lsh on / to try and identify the largest directories. Each directory is listed as being ~4-8K in size. That doesn't make sense to me. So I decided to do a du -sh on each directory. Having done this on all of the / sub-directories and added up those values, there is not enough reported usage here to equal 8.9GB of used space (as df -h / reports).how they would find out how the 9.7GB here is being allocated? Preferably without scripts as I am not ready to add a layer of complexity to this yet without understanding some fundamentals.
Ubuntu 10.04.1 I was just tidying up my panel when I notice the Volume icon is taking up the space of two icons: I can right-click and Move it to the left or right
View 6 Replies View RelatedHPDL385 with dual raid controllers (8 disks each). During the install of the ISO, it sees the raid controllers individually. I tried "One Generic Drive" but it still only partitions one of the raid controllers.Is it possible after the OS is installed to configure the space as one logical volume?
View 3 Replies View RelatedI plan to install a server using LVM. I thought a partition schema where /boot would be in an ext4 partition while / /usr /var /home and /opt would be in the LVM. My question is: if I'm putting / into the LVM, is it necessary to divide /usr /var /home and /opt into different logical volumes? If I divide them, would it become harder to maintain when new disk space has to be added to the volume group?
View 7 Replies View RelatedIs is possible to extend physical volume disk space from one to another?
Quote:
PV VG Fmt Attr PSize PFree
/dev/sda1 Zeus-extra lvm2 a- 149.05G 17.05G
/dev/sdb1 Zeus-misc lvm2 a- 394.96G 274.96G
Could I get 50GB from /dev/sdb1 and add it to /dev/sda1 ???
I'm getting an error message that something along the lines of "volume "filesystem root" has only 25mb space remaining". How do I increase the volume size so I never have to worry about it again? This is the 3rd time I've tried ubuntu and it's sticking more and more but this has me thoroughly perplexed. I've got a 320GB HDD partitioned 3 times with a Linux partition being 7GB.
Dual booting Win7Pro.
Running ubuntu 10.10 64-bit
I have a 500 GB hard drive connected via a SATA/USB adapter. After connecting it, I did a basic format of the drive with no problem. I then attempted the "Wipe Free Space" option under the File menu in BleachBit, selecting the external drive, and it began the process. It gives me a time estimate of about 300 minutes, but, instead, after a few minutes it says "Done" and gives me the message "[Errno 27] File too large. Disk space recovered: 0 Files recovered: 0 Errors: 1"
What happened? What do I need to do to get this volume wiped?