Software :: System Hangs - Possible Drive Failure - When Try To Watch Videos ?
Jul 10, 2010
Lately (in the past couple of weeks) my system has been hanging, particularly when I try to watch videos. I'm not sure why this is happening, but when I looked through my system log files I found what's on the attached file. A couple of other programs that I use frequently (xmms2d and epiphany) have similar entries, and I assumed they are related because they are typically running when the slowdowns occur. Also, my /home partition is giving some errors which may or may not be related.
View 5 Replies
ADVERTISEMENT
Apr 28, 2010
I'm at a loss in trying to debug a problem I have with my media centre. Basically I'm getting random system hangs and when I say hang I mean proper hang - processor stops dead. No animation, not network connectivity, no keyboard/mouse response, nothing. As for it being random - it has happened during movie playback, during idle, after being up a short time, or a long time, it doesn't matter, so it can happen any time really. The logs show nothing suspect, except they just stop and there is nothing common between the logs of two failures. It happens on both my 'old' ubuntu 9.04 partition and on my new 10.04 partition.
View 5 Replies
View Related
Feb 12, 2010
I cannot see any avi videos with vlc I can just hear the sound of them but, the odd part is that with totem I can see them perfectly. Can any one explain me what I am doing wrong? I got Debian Lenny Stable with Xfce4 Desktop enviroment. I tried to install ubuntu restricted extras and also I tried to install the following codecs:
sudo apt-get install gstreamer0.10-plugins-ugly gstreamer0.10-plugins-bad gstreamer0.10-plugins-bad-multiverse gstreamer0.10-ffmpeg gstreamer0.10-plugins-base gstreamer0.10-plugins-good gstreamer0.10-plugins-ugly gstreamer0.10-ffmpeg gstreamer0.10-gl gstreamer0.10-pitfdll libxine-main1 libxine-extracodecs libquicktime0 libdvdread3
But, the problem is that the codecs named bad and ugly apt cannot find.I got installed divx and xvid codec and also w32codecs.
View 4 Replies
View Related
Feb 13, 2010
I am using Lenny i386 and amd64, have installed flash 10 from abode but cannot watch TED videos. They are working though with other resent distros like mint, mepis, community remix F12,1. Does anybody know what codecs are needed to enable their playback? Unfortunately I could not find anything relative by searching under TED in this forum.
View 13 Replies
View Related
Oct 31, 2010
I've got an eeepc 1101ha and have installed the latest ubuntu, 10.10, but i can't watch any videos! Besides the original player, i have installed and tried to watch videos in VLC, SMPlayer and GNOME MPlayer but it has always some kind of error. In VLC I can hear the sound. On all others the file simply doesn't work.
View 5 Replies
View Related
Mar 24, 2011
it seems i have to update to a new flash version? i cannot watch any videos any more. i installed the flash-aid add-on in firefox. under "removal options" i see nothing until i select "expert mode". i have attached a screenshot. what do i need to select there and what are the next steps? i just upgraded to firefox 4.0, on kubuntu10.10.
View 2 Replies
View Related
Jul 3, 2010
I've installed fedora 7 and i'm having difficulties watching videos through my media player provided and on the internet. Should I use adobe flash or something else. When I had fedora 13 there were difficulties downloading adobe flash.
View 2 Replies
View Related
May 8, 2010
yesterday i upgraded my ubuntu to 10.04 LTS - the Lucid Lynx, and today i faced with a problem watching videos on the Internet. i already tried reinstalling the Adobe Flash Player i have in many ways... nothing helped and i actually think it isn't even related to the flash player... what can it be, and how can it be fixed?
View 9 Replies
View Related
Jan 23, 2010
Is there a default media player in linux such as windows media/ if so what is the name of it or can i download one that works with linux, i would like for the player to not only play music but watch videos as well.
View 2 Replies
View Related
Oct 11, 2009
I'm new to linux, When i try to watch videos on you tube, or anywhere, sometimes they don't work. Or they are real choppy. It certainly didn't do that when i was running windows, I know its not the internet speed.
View 4 Replies
View Related
Feb 11, 2010
how to download anything on my eee pc. I can't watch a lot of videos because i have the old flash player.
View 2 Replies
View Related
Jan 1, 2010
I have got a new computer today, It's got most new parts in it but I installed all diffrent types of flashplayers, SMF players all that and I still can't play flash or watch videos.
View 5 Replies
View Related
Aug 14, 2010
I am running 10.04 on an old computer. I can watch netflix videos, but there is no sound. I tested the speakers on another computer and they work. That leaves either the sound card, or something about 10.04. How do I debug this?
View 2 Replies
View Related
Mar 30, 2011
Downloaded FF4. For my purposes it doesn't seem that much different from FF3. I was able to watch videos on a news website that I hadn't been able to with FF3! On FF3, with the windows theme I have, there is a nice blue tint on the top of the tab, but not on FF4.
View 9 Replies
View Related
Nov 15, 2014
Is it normal that you can't watch YouTube videos after a fresh install? It comes with something called GNU Gnash but it doesn't work at all in Iceweasel.
View 11 Replies
View Related
Dec 15, 2010
I have installed flashplayer to my fedora and tried to watch videos which need flashplayer but it wont start. Its seems like my system have installed flashplayer but can't find plugin from mozilla. Tried to check if plugin exists but no. Tried to install it again but no.. same problem again.
View 3 Replies
View Related
Mar 27, 2011
yesterday the update manager asked to install some updates. i accepted (as usual).
today i found that i couldn't watch videos on videos or some flash content.
here is a copy of the history of installations code...
View 6 Replies
View Related
Sep 7, 2009
I installed "flash-plugin-10.0.32.18-release.i386.rpm" manually to my system in order to let firefox enable watching animated images and video ,but even though firefox still not able to do so. I'm running RHEl 5.
View 3 Replies
View Related
Jul 28, 2009
I have been using Fedora for a while now. When I try to watch movies or videos on the internet or offline a error message like the following: What should I do?
View 6 Replies
View Related
Aug 11, 2011
I am trying to use the s video port on my presario 2800t to watch videos on my tv. I have plugged the S Video cable into the back of an RF box. So how do I get the computer to send a video signal through the s video port?
View 3 Replies
View Related
Jul 13, 2011
I have a flash drive that I regularly use on my laptop. If I unplug the flash drive without first unmounting it, I get a popup notification of a kernel failure (with diagnostics sent to kerneloops.org). Then, if I attempt to shut down the system via the console, it hangs on "The system is going down for halt/reboot NOW!" and doesn't actually shut down. Using Gnome's graphical System > Shut Down feature just logs me out and sends me to the login screen; the shutdown feature from there does nothing. I have to disconnect the power cord on the laptop in order to shut it down, and I don't like doing this.
System: 32-bit Debian Squeeze stable with kernel version 2.6.32-5-686, running Gnome 2.30.2, on an Acer Aspire 5570z.
I use Keepassx to store my passwords and keep the keyfile for my password database on the flash drive in question. I mention this just in case it helps determine what's causing the failure.
dmesg has quite a bit to say about this:
View 8 Replies
View Related
Aug 13, 2010
I love Ubuntu so much but when my previous graphic card passed away a technicien installed on my desktop an Ati Radeon 9550, my question is what I have to do to watch smooth videos in streaming?
View 9 Replies
View Related
Sep 11, 2015
It all started about a week after upgrading to Jessie and I had an unusual system failure, in that the CPU went to 100% usage and the hard drive light was on constantly. The keyboard and mouse were were non-responsive. Not having REISUB enabled I did the "stupid" thing and pushed the reset button on the computer. BAD BOY! As a result the computer would not boot and I had to use a live CD to format the drive and install Wheezy (I had the CD).
After installing Wheezy, everything worked well for about 3 days and then it did the same thing. Fortunately I had REISUB enabled and was able to reboot. I looked at the syslog and found a segfault with colord-sane and, after some research that suggested colord-sane might be a problem, I set UseSane=1 in colord.conf . Things seemed to be okay for about 4 days.
Well, after all that I had another problem today with booting. During boot I got an error message saying that there was some hard drive problem and that I needed to log in and run fsck, which I did . There were I believe 4 INODE errors that I was asked if I wanted to repair, to which I responded yes. After that the system booted correctly. After booting and entering the Gnome Classic desktop I looked at the Disk Utility and checked the SMART data. There is now 1 bad sector where before there were none. The drive is a one year old WD 500GB Velociraptor.
Don't know if this is relevant, but in the days before this latest "crash" I had downloaded about 8 movies using bittorrent. Could this have overtaxed the HDD?
I guess my questions are: When fsck "repaired" the disk would it have moved any data from the bad sector to a new location? What may have caused the sector to go bad ? Should I be buying a new hard drive?
The system seems to boot okay,at this time, so I assume that no critical system files were affected. Just curious as to how I should proceed. First is BACK UP my data. Got that !
One more thing I just thought of is that every time it "crashed", I was using LXDE.
View 5 Replies
View Related
Jan 29, 2011
I have been researching the web for a program which will allow me to backup my entire hard drive so that I can restore my system if need be. I am however unsure which is the best one to use if I want to achieve this:Somehow I want to back up my hard drive containing my ubuntu system byte for byte so that if the hard drive were to fail I could simply go to the store, get a new hard drive, restore my backup and be up and running again without having to do any re installments of ubuntu or any other programs for that matter.
What is the easiest program that does this? I would like it to support incremental backup.rsync with the "Back in Time interface"?bacula?
View 8 Replies
View Related
Sep 18, 2010
Still cannot watch a flash video in full screen for more than 1 minute before it freezes/hangs. Ridiculous that this bug has been around for YEARS and no one took the time to fix it for new versions.
View 8 Replies
View Related
Jul 9, 2011
I've been trying to find a way to watch videos from my main desktop computer on another computer I've plugged into an HDTV. I'm such a Linux newbie that I decided to give Mythbuntu a try. It was way to complicated for what I needed, and I'm sure that some more experienced people reading my first two sentences laughed to themselves at my naivety.
What I am trying to find is simple: browsing one computer's home folder from another computer, and playing the videos therein. If there's anything like Mythvideo that requires less than half of the skill requirements, I will telepathically send love to the person that informs me of it.
View 2 Replies
View Related
Mar 19, 2010
I am experiencing frequent crashes for my browsers (FireFox, Opera, Konquerer). It doesn't seem to be related to the amount of tabs I have open, sometimes it will crash on 1 tab, and sometimes it is fine to have 20 tabs up. In addition to this, some flash videos hang after 3 secs.
PC spec:
OS: SuSE 11.2 (x86_64)
GUI : XFCE (KDE 4.0 back up)
Intel Q6600, 2GB Ram DDR2, 9800GX2
View 9 Replies
View Related
Sep 10, 2010
Ubuntu Hangs While Trying to Transfer Photos and Videos From Digital Camera I have a Canon Powershot S3 IS and I've been trying to transfer photos and videos (13 gigs worth) from it to a local folder (I'm currently using Ubuntu 10.04) via USB cable. I've had very little success - I've only transferred one video file, everything else failed, including a single photo transfer attempt!
First it would take really long for the actual transfer to start after I've dragged and dropped files from the camera to a local folder (or even doing ctrl+c and ctrl+v). The progress bar would appear, but then it would take forever before the file transfer would start. In the case of the single video transfer, it started and finished after a while. But when I selected all of the videos on the camera and tried to transfer it all, it would just take a really long time, slow down gnome to the point of hanging, and then eventually just show me an error message indicating nothing could be transferred.
View 3 Replies
View Related
May 1, 2010
Transmission seems to cause a kernel panic when I try to use it. Using system monitor to watch cpu usage, as soon as I fire up transmission, the cpu usage spikes to 99 and 100 percent and the transmission window grays out. I set firestarter to allow bit torrent usage, I was wondering if there was something else I needed to do or if transmission was broken. I am running an Athalon 3200 on an MSI motherboard with 2 gigs of ram.
View 5 Replies
View Related
Jun 28, 2010
I like to check out movie trailers on trailers.apple.com I also like using Opera I know there is some issue with apple and the code for the new streaming codec version or something of the sort. Also, I can't even download the trailers from the site to watch them from my hard drive. It's like the linking system wont function properly.
View 3 Replies
View Related
