I am interested in setting up a l2tp OR pptp VPN server under arch linux. I have apache, mysql, and other server software installed, if that makes any difference. (note: this is a home server, nothing serious).
View 9 RepliesI'm trying to connect to a Microsoft ISA PPTP server from my Linux box. The box I'm connecting from is itself a router. I have no problem connecting a Windows XP machine to the VPN via this machine. This is fine, but I would rather connect via the Linux machine, giving me far more advanced routing options (i.e. no to send every packet from the XP box completely unnecessarily via the PPTP tunnel). The Linux router is running Debian Lenny.
I've checked iptables. There were initially some issues. I've fixed those.
Invoking pppd from the console, I can see that authentication succeeds, but then some negotiation goes wrong and the server terminates the connection. Here's the output from pppd, with the more sensitive stuff removed:
Code:
<hostname>:~# pppd call <peer> nodetach debug
using channel 19
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xe3e45f75> <pcomp> <accomp>]
code....
I recently wanted to connect to a vpn server which its tunnelling mode is L2TP.how I can configure my FC 12 to connect to this vpn server?I mean in which files I should enter that server's IP and my username and password.
View 3 Replies View RelatedI set up a L2TP/IPsec VPN server using xl2tpd and racoon on CentOS 5.5.
Now clients can successfully dial up to the server, but I can't find a way to know who connects to my server.
Is there any method or command to show l2tp client's information, such as his IP address, username.
Can anyone explain why a 64 bit kernel builds a bzImage in both arch/x86 and arch/x86_64- is there a difference between the two?
View 2 Replies View RelatedI just did the pacman -Syu command today since i have had limited access to internet i could use with arch lately, (been tethering via droid which is only compatible in ubuntu) The command line works fine, i even reinstalled X to see if that was the problem,whenever i do startx it loads up for a second but before my xfce screen even pops up the screen blinks and blackens.
View 7 Replies View RelatedI am trying to connect to a PPTP VPN at work, and I cannot accomplish that. Both server and client are using Ubuntu 10.10.
Code:
Jan 7 11:32:26 multicore-dev03 NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
[code]....
i have a VPN server PPTPD on Centos 5.3
eth0: 62.2.2.x (public on the internet)
GW: 62.2.2.1 (cisco router)
i want to configure my ppptp server to allow users access internet with their own public ips of class 62.2.3.0 62.2.4.0 62.2.5.0
every time i configure my server all users can get thier IPs but they only go out with my server IP same as NAT not routing.
can you show me the proper configuration to make my users connect with public IP and have internet access. use specific DNS ( i did this but some users can not brows by DNS)
is there any way to specify an expired date for each pptp user.
I have setupped the PPTP, but failed the config it. My local mechine's IP is dynamic.
IP=66.96.223, user=root pass=nJAG1kK1Tp
How can i set-up L2TP client on my ubuntu-11.04? There is no such option in my vpn connection types.
View 2 Replies View RelatedI want to be able to use my Dial-up networking VPN connection on either my windows desktop or Fedora 12 laptop to dial into my network. My server is Fedora 10. This question is how do I setup the server. I already have the clients configured..I've tried this but it looks like its for LPT2 or IPSEC tunnels. I am looking for PPTP (Dial-up
View 3 Replies View RelatedI need to setup a PPTP vpn server i am planing to get a VPS server from ixwebhosting they will install either on for the following os
1...centOS
2...debian
3...openSUSE
which would be best for a PPTP server, i belive i would have to install POPTOP server on them my self! or is there a better way to do it?
I had configured IPSEC/L2Tp on my Centos 5.4 gateway machine .For testing i had disabled firewall and Ipsec is working fine.I am able to connect from client etc...Now i want to allow Ipsec and l2tp throught Firewall.here is my Current Working Firewall.Only Openvpn is allowed and is Redirected.
eth0=XXXSTATICIPXXX
eth1=192.168.1.81
OpenVpn IP Range = 172.24.0.16/4
Ipsec Ip Range = 192.168.1.0/24
[Code].....
I have a server in the US, and I want to setup a VPN so I can run my home computer through it.
I'm using CENTOS4
I'm currently using a proxy, however I had to restrict it by IP, hard to manage when using mobile devices.
I've got a FC PPTP server up and running but can't connect to it using VPN. I'm using NetworkManager but the connection fails each time. On the server, I'm seeing the following in the /var/log/messages:
Quote:
May 8 16:37:05 li99-23 pppd[2113]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so is for pppd version 2.4.3, this is 2.4.4
May 8 16:37:05 li99-23 pptpd[2112]: GRE: read(fd=6,buffer=8059780,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
[Code].....
Ive checked that the name,passwords all match, which they do. Has anybody seen this before ?
I'm trying to get a pptp server up and running. The server starts just fine, but encounters errors when a client tries to connect.
Code:
CTRL: I wrote 32 bytes to the client.
Dec 29 23:27:48 frankenstein pptpd[9402]: CTRL: Sent packet to client
Dec 29 23:27:48 frankenstein pptpd[9403]: CTRL (PPPD Launcher): program binary = /usr/sbin/pppd
[code]....
I assume the failed read line is the culprit. I am currently running on a test machine. There is no firewall. I read on this error points to a firewall misconfiguration, but there isn't one.
I'm trying to use a vpn server which uses pptp. I've set up pptp as per the Debian Howto and it seems to be working, but I'm not actually acessing the net via the server.Not sure what info would be useful but here are route -n and ifconfig.Can anyone suggest what is wrong here, and how to test if the vpn link is actually working?
View 6 Replies View Relatedeverything works fine, clients can connect to the vpn server with no problems and they can ping local machines! but no internet access through the vpn connection unless i uncheck the default gateway option on my client machine which is not what i want. I want my clients to get my server's ip address. my server is behind a router (router's ip : 192.168.0.1 | server's local ip: 192.168.0.100) so i used localip 192.168.0.100 & remoteip 192.168.0.234-238 in pptpd.conf. it think there is something wrong with routing or firewall rules, because it seems that the DNS resolution works .. when i try to browse a website my browser says "Waiting for xxxxx.com..." and it stays on that stage forever ! the funny part is that google.com works fine (don't know how).
p.s :
* I have already opened the port in on my router. I even tried it locally to make sure that the router is not the problem here. * already added ms-dns 208.67.222.222 / ms-dns 208.67.220.220 to pptpd-options. (found another guide that suggested to do this, before adding these two lines even dns resolution was not working.)
Tried to install pptp vpn server via webmin, and I tried connecting remotely from my laptop, but it keeps failing on the verify username and password - I get a error 778 it was not possible to verify the identity of the server. Not sure what could be wrong with the config..
View 1 Replies View RelatedRunning Ubuntu 11.04 Server 32bit fresh install
I did this walk-through trying both iptables and ufw
I am able to connect to my VPN server using both windows 7 and Ubuntu desktop just fine, and using wireshark verify that all packets are being compressed and sent through the VPN tunnel.
Many sites work but there are several that will not load while using the VPN, one of them is ubuntu forums also sourceforge.
I can ping the servers while connected but the websites just will not load, and time out. The second I disconnect from the VPN they load instantly.
I have been wanting to switch from my routers VPN to my headless linux box VPN. I have everything setup in the PPTP and then forwarded the ports to it. Heres the kicker. My APPLE Iphone connects to the VPN without a problem at all. Views Intranet pages etc.
My Windoz XP is kicking and screaming and one error after another. This is my setup on XP: I entered Ip Entered exact same credentials as used for connecting with my iphone turned off "use gateway on remote network" Changed type to PPTP VPN connecting my xp machine to this PPTP server on linux?
I'm running an own PPTP Server, but I can't get it to access the internet. All my PCs at home run in the 192.168.0.0/24 net, the PPTP Server has local IP192.168.0.5 and remote IP 192.168.0.80-99. The router to the internet is at 192.168.0.1, and the IP of eth0 on the machine where the pptpd runs is 192.168.0.4. I want to be able to connect to the internet trough that VPN and access my local LAN servers (which works fine so far). I can ping internet and local IPs successfully, but can not access them with a browser, or connect to them in any other way. I have 'accepted' all in/output and forwards.
I am running a Squid proxy on the same machine, and if I do:
iptables -t nat -A PREROUTING -j REDIRECT -i ppp0 -s 192.168.0.0/24 -p tcp --dport 80 --to-port 3128
I can access the internet through Squid, but of course Jabber/ICQ etc. Won't work then because it just refers port 80. But I want the PPTP Clients to connect to the internet directly, if I don't use that rule it's not possible to load any pages. But pinging works all the time. DNS is also working fine, but I can't even access webpages via IP directly. How can I allow the PPTP IPs 192.168.0.80-99 to get direct access to the Internet with Iptables?
I'm attempting to get 10.04 to connect to an SBS 2003 pptp vpn server, but for the life of me have been unable to find or implement a working solution. System previously had 8.x and 9.x and had no difficulty connecting to same server, but on a fresh install of 10.04 cannot connect.
tail -f /var/log/syslog shows the following:
Code:
Sep 10 15:19:32 ubuntu NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Sep 10 15:19:32 ubuntu NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started
[Code]....
I am trying to connect to our work server (windows), however, without succes In the log I get the message: "Failed to parse server response"
And when I close the vpn connection window I get "there were no valid vpn secrets"
I Use F10 with xfce on an aspire one.
recently i rent a xen vps intended to setup a PPTPD vpn server for me and my friends. so we can by-pass the great firewall in china and get back on ....., facebook and stuff. i have already setup the server and i can connect to it without any problem. but i still want to do some further configuration the server:
1. i want to limit the bandwidth to 400k/s per connection.
2. i also want to limit the max connection per user a/c
i have some thoughts on the 2nd requirement. in the user configuration file of /etc/ppp/chap-secret, you can specify the range of ip the user can get, does it limit the max connection per user a/c? or they can connect anyway, just every now and then a box pop up says conflict in IP address?
I am trying to connect to a windows 2000 VPN server at work, with my current settings in DOES connect to the VPN and i can ping the domain server which is 10.1.1.2 but the first issue is i cannot ping the other computers on the network(via hostnames) can't remember the ip address of the other machines . second issue is when the connection is established and i RDP into 10.1.1.2 ok great i am connected to the server but any interaction in the RDP session even moving the mouse on the screen kills the session and the VPN connection fails.
Running Ubuntu 10.04 LTS 64Bit
Image of current settings in network manager:
Syslog:
Code:
May 11 12:08:04 oliver-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
May 11 12:08:04 oliver-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started
[Code].....
Recently I notice that when I'm connected to an vpn server (pptpd) and I'm using it as a default gateway my download and upload speed decreases almost to the half of the usual speed. I made a test using iptables in order to count how much GRE packets are generated (except the real traffic itself) in that way:
Code:
iptables -I INPUT -p gre -j ACCEPT
iptables -I OUTPUT -p gre -j ACCEPT
iptables -I FORWARD -s 172.16.10.101 -j ACCEPT
iptables -I FORWARD -d 172.16.10.101 -j ACCEPT
The first 2 rules match all GRE packets between the pptpd server and client, and the next rules - the traffic between the server and the client.
When I turn the counters to zero and begin to generate traffic (to browse, to download etc.) I see that the GRE packets are even more than these in the FORWARD chain.
So, my question is first of all is my test correct and is it true that so much gre traffic is being generated during the browsing (it becames clear that the traffic is double than if the pptpd wasn't used as a gateway) and if yes - can that traffic be reduced?
I am trying to setup CentOS server 5 with tftp where the Cisco switch configs can be sent. I have the following:
[code]...
I like to run a mySql database server on a Ubuntu (which is no server) for local use only. Is there some instruction how to do this? I downloaded several DBMS but they all seem to assume a running server.
View 1 Replies View RelatedBecause our visitors/customers are short term, and may be configured incorrectly with their own mail servers we automagically redirect all port 25 traffic going to internal IP's to our own mail servers while on our network.(postfix on centos 5.6)While I have taken some measures to prevent it from spamming, I would greatly appreciate some assistance.I will be putting in clamav, but I haven't configured it yet with the mail.I am using postfix, but can also put on procmail or even spam assassin
View 6 Replies View Related