I had configured IPSEC/L2Tp on my Centos 5.4 gateway machine .For testing i had disabled firewall and Ipsec is working fine.I am able to connect from client etc...Now i want to allow Ipsec and l2tp throught Firewall.here is my Current Working Firewall.Only Openvpn is allowed and is Redirected.
eth0=XXXSTATICIPXXX
eth1=192.168.1.81
OpenVpn IP Range = 172.24.0.16/4
Ipsec Ip Range = 192.168.1.0/24
[Code].....
I have a Ubuntu 10.10 box which i've developed an IPTables Firewall script and is forwarding my ports correctly. This service also runs Openswan VPN Server with 2 VPN's, which is also working well.
I have come across a small snag with excluding the multiple VPN subnets I have from the NAT on this box.
I have the line in my configuration file:
-A POSTROUTING -o eth1 -s 10.172.1.0/24 -d ! 192.168.5.0/24 -j MASQUERADE
Which when added to IPTables does make the VPN come to life. But I can't seem to get it to add the second subnet. Unfortunately, I can't do a blanket exclusion such as 192.168.0.0/16 because the second VPN is on a Class B subnet address which I cannot change.
I want to setup firewall protection with iptables to support IPSec tunnels. That is, the firewall will drop anything from any host if it is not from an established IPSec tunnel. And it will accept anything (any protocols) if it's from an IPSec tunnel.
That is, I need also to open up ping to make ping work. But if I open up icmp, I cannot prevent pings from hosts that's outside my IPSec tunnels. This defeats my purpose.So if my purpose is to allow "anything" within the tunnel and disallow/drop anything outside the IPSec tunnels, how should I setup the iptables rules?
i've got a few questions about iptables. i know how to set up ip tables to only allow from an ip address or a subnetting ip addresses. question is how do i allow from 2 different networks? would i need to create 2 lines of entry in iptables to the same port? e: allow 10.168.1.1 and 196.168.1.1 on port 22 is there a way to put all that in 1 line or would i need to create to rules for the port? i know i can use the ssh allow or deny but i'd like to stop access even before it gets to the ssh. stop it at the source kinda thing.
View 4 Replies View RelatedI've got two virtual machines running, the first VM (VM1) has two network interfaces, one bridged with my real lan, one a private subnet. The second VM (VM2) has one nic, only on the private subnet.
I have VM1 acting as a router for VM2, giving access to my real lan for internet access. The problem I'm having is I cannot get VM1 to forward ports 80 (http) or 222 (ssh) to VM2 from my real lan.
Here is the script I've cobbled together from various (foreshadowing!) locations:
Code:
I am using dyndns to keep track of my smartphone's ip address. The idea is to be able to ssh into my home network, protected by an iptables firewall. If I use the command: # iptables -I INPUT 9 -s myname.dyndns.org -p tcp -m tcp --dport 22 -j ACCEPT it updates using the current ip address, but the next time I get an ip address update to my phone and update dyndns to properly provide nslookups, this is not being updated in iptables unless I restart my firewall. Is there a better way to do this?
View 3 Replies View RelatedI recently wanted to connect to a vpn server which its tunnelling mode is L2TP.how I can configure my FC 12 to connect to this vpn server?I mean in which files I should enter that server's IP and my username and password.
View 3 Replies View RelatedI have an IPsec VPN between 2 Ubuntu 10.04.1 Boxes which is working perfectly. However I cannot get any traffic to route down the VPN link.Interestingly, when checking the routing table, there isn't even a route list for the remote network. This is the same on both sides. Also there isn't an ipsec0 interface listed either.However, when a the command "sudo service ipsec status" is ran, it definately shows the tunnel is up and connected.
View 1 Replies View RelatedI install openswan on rhel6 and when i execute the command "service ipsec start "
it say:
/usr/libexec/ipsec/addconn Non-fips mode set in /proc/sys/crypto/fips_enabled
/usr/libexec/ipsec/addconn Non-fips mode set in /proc/sys/crypto/fips_enabled
ipsec_setup: Openswan IPsec apparently already active, start aborted
[Code].....
I'm trying to perform a VPN lan to lan IPSEC connection. By my side, I have a server with 2 IP's, i.j.k.l (destined to act as a VPN gateway) and i.j.k.m (the server). I am a newbie. I don't know if this configuration is normal, but it's forced by our partner.
My configuration is:
OS: Fedora release 7 (Moonshine)
OpenSWAN version: Linux Openswan U2.4.7/K2.6.23.17-88.fc7 (netkey)
ipsec.conf
# /etc/ipsec.conf - Openswan IPsec configuration file
#
# Manual: ipsec.conf.5
[Code]...
I've been using IPv6 on my local network and through a Hurricane Electric IPv6 tunnel. I've heard that one of the built in features of IPv6 is encryption, both scrambling the data and authenticating where the traffic came from. I've done some searching and heard of SWAN and Racoon, but some of the stuff I found is old and I would like to know what the easiest/best way to set up IPSEC for IPv6 is.
View 3 Replies View Relatedi would like to establish a VPN connection which can hold either 'two' hosts..and secondly if that's done i would like to go for more number of users..Can i do it using IPSec services??if yes then how?
View 9 Replies View RelatedWhile I successfully configured an IPsec-VPN (I use a similar tho modified setup like this:[URL].. I am now stuck on the next steps. While I can connect to everything I want, I need to configure "access-groups" and/or "users".
The scenario is similar to this: Lets say Host A, B and C allow SSH-Connections and some weird non-standard UDP-Connection from Host-VPN, and are also accessible on other ports with public IP's (like http).
I now want to limit, that an admin-user has access to all of them, while trainee-admin only can access everything on Host B and C, and CEO only can connect via telnet to Host C - and all users can be roadwarriors
(I made this example up to give you an idea what i'm trying to do - hope it makes sense). Now my question is, if someone can point me towards a direction, as I'm quite clueless at the current moment as to what to try. I know that commercial IPsec-Implementations can do this, but can OpenSWAN/... give me something similar?
Connecting two networks with ipsec on this manual [URL] The two networks are connected, everything works, the question is as follows: For a gateway to multiple subnets, I have access to only one subnet is listed in / etc/sysconfig/network-scripts/ifcfg-ipsec0 DSTNET = 192.168.2.0/24. How do I get access to all the subnets?
View 2 Replies View RelatedIs there any possibility to transport one or two VLANs through a VPN (IPSEC) link on Linux
View 2 Replies View Relatedi need to build an ipsec vpn between a linux debian server and a zyxel prestige, The debian server got 2 ethernets connection one for the internal network and the other one is public with a public ip adress.I need to know what i need for the build the tunnel, could you please let me know what i need? Let me explain i have only to configure openswan or i have to configure the iptables or somethings else too? I found this one do you think this would be work for me? [URL]..Is debian a right distro or should i try someone else?
View 2 Replies View RelatedI've no experience with IPSec. I've used many times OpenVPN (with static key or certificates x509).
Could anyone suggest me a good tutorial in order to learn IPSec vpn with Linux?
I've searched through google, and all I can find are instructions on how to set up a L2TP/IPSec VPN that works with macs and iPhones. I'm NOT trying to set up an L2TP/IPSec VPN. I'm trying to set up a pure-ipsec vpn.
The iPhone IPSec client is a built-in cisco client, I believe. I'm staying away from L2TP and PPTP because I need multicast packets to go through. *edit: wow, i just noticed that the title says "8.10 LTS". Oops! I obviously mean "8.04 LTS". Gah, the lack of sleep got to me.
I just got vpnc setup to work with my VPN at work and now I am trying to figure out how to limit the traffic that is routed through the VPN while I'm connected to it. I only want traffic going to the local domain to be routed through the VPN.This is what my vpnc config file looks like:
Code:
IPSec gateway publicdomain.example.com
IPSec ID XXXX
[code]....
My client is on Ubuntu Lucid 10.04, I installed ipsec-tools and racoon from the repositories. The gateway is installed on a CentOS machine. I've configured everything to get a working roadwarrior configuration with authentication_method hybrid_rsa client and server. It's working in aggressive mode, but in main mode I can't get it working. I delivered new CA and certificates several times but I'm still stuck.
It seems that it comes from my client not supporting the certificate sent by the server. The client contains a copy of the CA, whereas server has a private key and a certificate signed by the CA.
[Code]...
How can i set-up L2TP client on my ubuntu-11.04? There is no such option in my vpn connection types.
View 2 Replies View RelatedI have a server in the US, and I want to setup a VPN so I can run my home computer through it.
I'm using CENTOS4
I'm currently using a proxy, however I had to restrict it by IP, hard to manage when using mobile devices.
I have squid running on my home gateway, but when I try to listen to streaming radio, it doesn't work.
Using mplayer with a proxy shows this:
Code:
/home/fukawi2 $ mplayer http://media.on.net/radio/143.m3u
MPlayer SVN-r32492-4.5.1 (C) 2000-2010 MPlayer Team
159 audio & 349 video codecs
mplayer: could not connect to socket
[Code]....
I am interested in setting up a l2tp OR pptp VPN server under arch linux. I have apache, mysql, and other server software installed, if that makes any difference. (note: this is a home server, nothing serious).
View 9 Replies View RelatedI have an old T30 that has an incompatible wireless card with my network. How can I disable the builtin wireless card while allowing my USB Linksys card to fully function?I can't figure out how to have one run while disabling the other.
View 4 Replies View RelatedI am running karmic on a laptop. I recently changed iptables to drop all new incoming packets (not the related or established ones) on all ports. I was not running a proxy, so this worked fine. More recently I got v 3.0.13 of privoxy with apt-get and looked through the config file. I changed the default port in the privoxy config to 8080 and kept the ip at 127.0.0.1. Then I changed the Firefox settings to use a HTTP proxy at 127.0.0.1 with port 8080. when I try to run privoxy with the command: privoxy /etc/privoxy/config , the terminal outputs no errors. Then when I try to access a webpage through firefox the page will not load, but firefox doesn't display any reason for it. I don't really even know if privoxy is running because when I check the logfile (after having uncommented the logfile line in the privoxy config file) it is blank. I don't know much about networking, but I was wondering if someone could tell me why this is happening? Well that was a bit dumb of me. I just had to allow new packages in from localhost.
View 2 Replies View RelatedI set up a L2TP/IPsec VPN server using xl2tpd and racoon on CentOS 5.5.
Now clients can successfully dial up to the server, but I can't find a way to know who connects to my server.
Is there any method or command to show l2tp client's information, such as his IP address, username.
i am using red hat5 n i want to create X.509 certificates for ipsec vpn help me in creating certificates, not able 2 create certificates guide me ehere is the location for certificates.
View 1 Replies View RelatedI've set up two security associations(in and out) on two hosts, and then set up two policies per host that should filter traffic to those SA's. Yet when I try to ping one host from the other I get no response, meaning that the filters on one side work and drop unprotected packets, but both hosts are configured to communicate using ipsec. Can anyone point me in the right direction?
Code:
ip xfrm state add src 192.168.77.23 dst 192.168.77.24 proto esp spi 0x53fa0fdd mode transport reqid 16386 replay-window 32 auth "hmac(sha1)"
[code]...
I am getting this error when I try to bring up IPSec Tunnel.Starting connection with command /usr/sbin/ipsec auto --up 'paycode-to-vivacom' ..
104 "paycode-to-vivacom" #7: STATE_MAIN_I1: initiate
003 "paycode-to-vivacom" #7: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] method set to=106
003 "paycode-to-vivacom" #7: ignoring Vendor ID payload [FRAGMENTATION c0000000]
[code]....