Software :: Possible To Do Public And Private Ftp Server In One Host Without Using Tcp Wrapper?
May 13, 2011I want to know that it is possible to do public and private ftp server in one host without using tcp wrapper.
View 1 Replies
ADVERTISEMENT
Ubuntu :: Use Openssl Public And Private Keys So Only A Host With The Public Key Could Access / Decrypt The Filesharing
Aug 2, 2011I'm trying to write a p2p file sharing program using python's built-in libraries. Everything is going well. The only thing is that i'd like to be able to use openssl public and private keys so only a host with the public key could access/decrypt the filesharing. I've gotten these libraries (httplib, basehttpserver, ssl, os) to work using just a pem file containing both the public and private keys but no success with them seperately. Can someone point me in the right direction or offer an alternative? PS, the goal of the project is to create an anonymous, decentralized, secure file sharing program. I want to be able to upload this to sourceforge so everyone can use it, if that's any incentive
View 2 Replies View RelatedUbuntu Networking :: Public IP Vs Private IP For DHCP Server?
Feb 12, 2011My Ubuntu server is now providing routing duties to my network, but I'm having trouble opening ports to my network. I have a DynDNS account, so the IP is always current, but I can't ping even my IP directly.
My network map looks like
Internet > SpeedTouch DSL modem with DHCP > eth1 > Ubuntu > eth0 > LAN
With the modem providing a 192.168.1.xx IP to eth1, I can browse fine. The default gateway is my modem. I switched to the public IP of the modem so I could use iptables for firewall duties, but I was locked out of the internet. No gateway was set when I did that, but eth1 received the public IP of my modem.
How can I use the public IP assigned to eth1?
General :: Generate A Public/private Key - UNIX
Nov 17, 2010For using SSH, why does a host also need to have a public and private key? And how can I generate a public/private key pair for myself?
View 5 Replies View RelatedGeneral :: Github Private/public SSH Key Authentication?
Jan 28, 2011I created a private/public pair. I put the public on github.But I can never push to github.Every time, it says public denied. In order to push, I need to do this:eval ssh-agentssh-add ~/.ssh/github_dsaThis is driving me nuts that I have to do this every time. So, I just put it in my ~/.bashrc file. I feel like that's a hack. Is this normal?
View 1 Replies View RelatedNetworking :: SSH Setup - Public / Private Key Authentication?
May 7, 2010After years with Linux and using ssh on a daily basis I have to admit I've never setup public/private key authentication and I've never run passwordless logon to ssh. It's not that I've never tried, I have - I've just never got it working. That to me is an almost alien concept as I am a tinkerer at heart and rarely stop until something is working the way I'd like it to. I get the principle of what's going on but I've always had a mental block about it.
View 3 Replies View RelatedNetworking :: Keepalived Redirect Public Vip To Private Vip?
Jun 2, 2011I have a strange problem and I can't seem to find clear information on how to do this . I have 2 loadbalancer set up keepalived NAT mode with 2 interfaces each
internal vip - 192.168.0.199
external vip - 195.x.x.21
lb1 -master
bond0 - private - 192.168.0.239
[code]...
Programming :: C++ Using Private Variable In Public Function?
Feb 6, 2011I have a class in which a have declared a private variable "time". In one of the public functions, I am returning the value of "time" (either directly by using "return time;" or by something similar to "x=time; return x;" but I keep getting a compiling error saying that "time" is not declared in this scope.
View 3 Replies View RelatedRed Hat :: Public And Private NIC - Hardening Snmp Via IP Tables?
Dec 7, 2010Most of our machines have public facing and backend mgmt private nics(ie: 192 or 172 networks). I wrote a rule that matches source ip(our monitor on a 192 network) on udp 161 accept. I want to prevent listening on that port on the public. Is the source rule sufficient or should I match the interface and then source? I know there a many ways to do this. I need to verify from the public network with a port scanner?
View 2 Replies View RelatedSlackware :: Generate The Public / Private Keys?
Feb 27, 2011I'm trying to set up my laptop to ssh into my home server, but I'm trying to find how to generate the public/private keys. I was able to do it in Slack 12.2 by just running ssh-keygen, but that command is not in 13.x.
View 2 Replies View RelatedOpenSUSE Network :: Configuring FileZilla - Public And Private Key?
Mar 14, 2010i am totally new to Opensuse and to filezilla. I formerly used winscp - a windows-client for ssh.now i have a linux box and want to connect to the server via ssh ing filezilla.Can i use the same keys as i used in WinSCP - where should i store them and the third question.I read something about a certain so called certificate-file that has to be created!?
View 1 Replies View RelatedUbuntu :: Disable Password-Authentication Using Public / Private Key With Ssh
Mar 27, 2010So after tinkering for a while, I was able to configure ssh for private/public key authentication and disabled Password-Authentication. In the past I had some issues with people brute force trying passwords/usernames so I want to avoid this, but I need some form of secure FTP that now doesn't work due to the aforementioned setting.
View 2 Replies View RelatedNetworking :: How To Connect Systems In Private Network With Public
Jan 11, 2011We have to connect one PC in private network (campus) with other PC (mostly a modem in our case)in public network. Connection should be peer to peer like and we have to use C coding for establishing connection between this two systems. Is it possible if we use port forwarding or is there any other way?
View 2 Replies View RelatedGeneral :: Generating Public And Private Keys Using Putty Key Gen?
Jul 19, 2010Another question though...i have a fedora 12 server set up and i have created 3 sudo users. I have created 3 putty keys (public and private) using putty key gen and basedn my research i was told to put the public keys in /home/"user"/.ssh/authorized_keys .I did that but when i tried to log on using the key...the server is saying "server refused key" could anyone assist in this issue
View 4 Replies View RelatedGeneral :: Connect Systems In Private And Public Networks Using IP
Jan 11, 2011I have one doubt that is how can we actually connect a system in private network with the system in a public network using IP address. I have one system in private network (in my campus) I need to connect it with the system on public network (home) using IP address and communicate with each other. How can I do it or is there any other way of connecting these two systems more easily?
View 4 Replies View RelatedSecurity :: Ssh-keygen - Find The Public Key Belonging To A Given Private One?
Feb 18, 2010In my ~/.ssh I have a number of public keys and one private key (id_rsa). How can I verify which one makes a pair with the private one.Or, can one generate the public one from the private key (in reasonable time)?
View 4 Replies View RelatedNetworking :: QEMU: Tap Host: Windows 2003 Server - Guest: Ubuntu 9.04 - No Ip Address And Can't Access Public
Oct 28, 2010host is windows 2003 server 64-bit
guest is ubuntu 9.04 server 64bit
Qemu : 0.11.1
Qemu manager: 7.0
from Qemu manager, if network card is using User Networking, it's a NAT and I can see that Guest Ubuntu has an ip address 10.0.2.15 and is able to access the internet. However, as Guest ubuntu is running server so I want to do use Tap networking and I assue with Tap, the Guest ubuntu will get an ip address which is in the same subnet as host machine by dhcp. so from Qemu Manager 7.0, I changed Network card to be:
NE2000PCI
Vlan Number =0
VLAN Type: Tap Networking
Mac address: tap0's mac address from host
TAP Network Adpator: Tap0
Note that tap0 was created by openvpn. and then fired Ubuntu guest, ifconfig shows no ip address on eth0 (which has the same mac address as Tap0) so the guest Ubuntu has no ip address and can't access public.
General :: Configure Ssh To Stop Requiring Public/private Key Auth?
Dec 29, 2009I configured ssh on one of my servers to require public/private key authentication and deny access to login requests not using a public/private key. Now I need to unconfigure that,but I can't remember how I did it. I've looked through ssh_config and sshd_config, and nothing rings a bell. Googling only tells me how to enable public/private key authentication, not how to require it or stop requiring it.
View 2 Replies View RelatedOpenSUSE Network :: 11.3 - SSH Connections Using Public / Private Keys Rejected
Aug 10, 2010My ISP has for a long time had a broken forward/reverese DNS so that my ADSL connection with static IP address resolves to a completely different IP address on a reverse query. This has not been a problem until I upgraded a remote server from 10.3 to 11.3 last weekend and now ssh connections from my ADSL connection to it using public/private keys are being rejected with the following message in /var/log/messages (IP addresses changed):
Aug 10 12:00:32 penguin1 sshd[1270]: Address 83.175.246.243 maps to 83-175-246-243.static.dsl.aupex.com, but this does not map back to the address - Possible Break in Attempt!
But if I log in interactively with username & password, the connection succeeds. I've changed the StrictModes setting in sshd_config to 'no' but this hasn't resolved the problem. Obviously something in 11.3 is being stricter about this IP mismatch than it was in 10.2 (and no, the server is not using a firewall). There must be something I can change to make sshd more permissive? I've tried before to get my ISP to fix their problem but no luck. This needs to be sorted as a server at my home (which does not run SuSE) retrieves backups from the remote OpenSuSE 11.3 server every night using scp and these are now failing.
Ubuntu Servers :: Setup The Necessary Public/private Keys To Use In FileZilla?
Jan 26, 2010I installed OpenSSH via tasksel and am using Webmin for administration. I'd like to be able to SSH externally and want to setup the necessary public/private keys to use in FileZilla. In Webmin, under Servers > SSH Server I can click 'Host Keys' and see an RSA key. Is this the public or private key for my server? Do I need to copy this into a text file to import it into FileZilla on my remote PC (that I want to connect from)? Is that all that needs to be done (aside from opening the port on my router/firewall)? Or, is there an automated way to set this up via Webmin?
View 1 Replies View RelatedUbuntu Security :: Public / Private Keys On Multiple Servers?
Mar 26, 2010At the moment we have one SSH server with the private key being on a usb flash drive, and the public key being on the server in authorized_keys2. Now that three more servers are coming online, should we generate new keys, so we have muliple private and public keys (one pair for each server), or use the same two keys to access all the servers
View 5 Replies View RelatedProgramming :: Sending RSA Public/private Keys Into Calling Function?
Sep 9, 2010My calling application will accept only strings and interger. we are replacing RSA bsafe library to openssl. using RSA bsafe, we have generated the private and public key in BER format. Then convert the keys, BER format into ASCII format to send the calling function. (these everything done by using RSA supplied bsafe library) same way i have to right using openssl..i m now able convert the RSA public and private key into DER format
rsa = RSA_generate_key(1024, 3, NULL, NULL);
{
size_t size;
[code]....
Ubuntu Networking :: Port Forwarding From Public Address To Private Address?
Feb 24, 2010Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
General :: How To Make Public Folder Within Private Folder?
Sep 21, 2010My Linux username is "virchanza" and my group is "virchanza".How do I make a publicly-accessible folder within my private home folder?
View 3 Replies View RelatedServer :: Relational Interface/wrapper Around SQL Database?
May 19, 2011I'm not a database guru, so be patient with me: Is there some kind of "wrapper" software you can put around an SQL database (MySQL perhaps) that allows you to internally configure database rules on a higher level than the database itself can actually implement? (E.g., "rows in table A can be deleted, but only if there are no related rows in table B and only if column x for the row in table A is in state y.")The idea would be to keep from having to trust this kind of logic to the client programs, while also avoiding the need to write a full fledged server daemon just for your application. The clients submit their SQL insert requests to the wrapper daemon, and the daemon passes them on to the database if they pass a rules table defined for that particular database.
View 3 Replies View RelatedUbuntu Security :: Tcp Wrapper On A Dekstop - No Server Situation?
Mar 30, 2011I did a NMAP on a 10.4 desktop system. Found tcp wrapper on my system with an open port. Again I do not run a server. etc/host-deny and etc/host-allow contain no active elements. I know tcp wrapper as a great tool to secure a server. Closing the port with ufw gives no result, tcp wrapper still show up.
View 6 Replies View RelatedNetworking :: Deploy A Remote OS Installation For Host With Public Network Address?
Jan 27, 2010Is there any one know how to deploy a remote OS installation for a host with public network address? In a LAN with private network, we can use PXE, kickstart... but what we could do with the hosts have only public ip address?
View 2 Replies View RelatedCentOS 5 Server :: Writing Init Script For Wrapper - Start As Root Run By User
Nov 27, 2009I have installed the Apache Directory Server (ApacheDS) Now I need a iniscript that startining the App as Root, so that it can use the Port 389. After them a unprivileged User (apachds) should run the Service. The same solution I am searching for Glassfish. What can I use for them? RHEL and compatibles doesn't have a start-stop-daemon like Debian.
View 3 Replies View RelatedServer :: Host Unknown Error:Sendmail / Stat=Host Unknown (Name Server: Def-fgh.com.: Host Not Found)?
Sep 8, 2009Many of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.
There are more examples of the same,around 20 domain have the same problem.
Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)
Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)
Ubuntu Security :: Private Folder For Private Files?
Aug 18, 2010i noticed that all files can be seen by another computer if the drive is accessed
can I stop this? can i set a private folder?
