We are running MailScanner 4.83.4-1 on a CentOS 5.6 64-bit distribution. The status of MailScanner was checked hourly via the check_mailscanner script, and normally the e-mailed result was:
Quote:
Which indicated the process was running without issue.
The server in question sits outside the company firewall, and was configured to deliver e-mail messages directly to their intended recipients. Our company recently changed its policy concerning external e-mail servers to require them to send their e-mails to their destinations via an e-mail gateway server. Consequently, the server was reconfigured to relay its messages to the gateway, and is no longer delivering messages directly to their recipients.
When the change was made, I noticed the check_mailscanner script was sending a new message which read as follows:
Quote:
I have tried starting and restarting the MailScanner software via the /etc/init.d/MailScanner script. The output of the script seems to indicate that MailScanner starts, but a subsequent check for the application via the ps -ef |grep MailScanner command shows the command is not running.
I checked the /var/log/maillog file for any reference to this when I did the restart of MailScanner, and the excerpt shown below coincides with the time that I ran the script:
I'm using ubuntu, not seeing any errors within the logs so I'm looking for some advice on why MailScanner is starting postfix? (i.e. if both are stopped, I should only need to start MailScanner instead of both applications, correct?)
Looking through the MailScanner.conf I so see this section code...
i already installed mailscanner and other component as well as. the problem is when i log to mailwatch gui, mailscanner and postfix status show no.--it's should be show yes ..
how to overcome that or enable that problem?
how to setting mailscanner using postfix should the mail will filter first before pass to mailserver.
anybody have configuration file that's work well on setting mailscanner using postfix?
My MailScanner running on CentOs is blocking docx files, saying "The original e-mail attachment "****.docx" is on the list of unacceptable attachments for this site and has been replaced by this warning message.
I've tried adding it the list of allowed files:
/etc/MailScanner/filename.rules.conf:
allow .docx$ - -
but it still blocks them.
I've also tried manually coping the message file from the /var/spool/MailScanner quarantine/ directory into /var/spool/postfix/incoming
but this did not result in the mail being delivered.
I desperately need these mails released, and docx files to be allowed unconditionally. Anyone know why the above isn't working? Failing that, can all file blocking be turned off? I'd rather have virus relayed than legitimate mails blocked.
i have a postfix mail server in my office and mailscanner. recently i changed the password of mailscanner's admin login 'mailwatch' and now i m unable to get login in postfixmail scanner. even i changed the password of mailwatch user from mysql database, bt it does not work. get login into mailscanner to chk the mails of all users.
I have recently installrf MailScanner on my CentOS 5.5 and followed this instruction [URL] However, my postfix doesn't seems to be working after the installation. All the emails sent (using squirrel) mails are being held at /var/spool/postfix/hold
I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied
The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?
I am trying to set up a Mail Server -- Virtual Users with Postfix, PostfixAdmin, Courier, Mailscanner, ClamAV On CentOS 5.5 using this guide. These are the version and softwares I have used till now:-
I have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
Code:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
I installed the dovecot with aptitude in the debian squeeze, and want to use dovecot as imap and pop3 server with exim4 for my mail server, i configured the dovecot and exim4, but when want to start the dovecot get this error:
I had installed openSuSE 11.0 and then installed XEN using 'Install hypervisor and Tools' which is present in Computer -> YaST -> Virtualization.
After that I rebooted the machine in XEN mode[Dom 0]. There I installed a Virtual machine[Dom U] with OpenSuSE 11.0 Operating system using the option 'Create Virtual machine'which is present in Computer -> YaST -> Virtualization.
VM[Virtual Machine] got installed successfully and started running in TightVNC. I shutdown the VM and restarted it and it started running successfully.
After that I shutdown XEN[Dom 0] and restarted the machine in XEN mode again to run Virtual machine[Dom U]. But this time I got the below error when I selected the 'Run' option in installed VM.
Two days back I installed had setup subversion for my laptop from the following link HOWTO: Setting Up Your Own SVN Server (Using Apache and mod_dav_svn) - Mark S. Kolich
I don't know where I messed up the apache server. Now I am unable to start the apache server. I get the following error message:
I can't get Kaffeine to start. So i tried to run it from Konsole and I get this Code: kaffeine: relocation error: /usr/lib/libphonon.so.4: symbol pa_ext_device_manager_read, version PULSE_0 not defined in file libpulse.so.0 with link time reference
I updated / installed phonon Pulse. Now when I insert a DVD and select Kaffeine. I get this error: Cannot find input plugin for MRL [dvd:/] Now I have no sound.
The program I want to use: ProppFrexx Tagger or ProppFrexx Meta Data Editor, can be found here: ProppFrexx ONAIR - The Playout and Broadcast Automation Solution I need this to tag WAV files with RIFF INFO Tags.The Sony PSP can read RIFF Tags! so yeah, that's the reason I need this program. here the complete error message
i installed mysql 5.1, the workbench and glassfish along with netbeans for an application I plan to build using the java EE. Glassfish is on local host 8080 and when I installed mysql after that, trying to start mysql from command prompt or even connecting through the workbench gives me error. for example going through the terminal and just typing mysql gives me: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) what should I do so both servers can run at the same time when deploying my application? on windows this is all handled for me. but apparently thats not the case on ubuntu
I am trying to install SAP Gui for linux 710r9 on fedora 10. After installing and configuring the client correctly I was able to LOGIN in to my SAP and use it properly, but when I select connect it gives me error box saying "Error when starting "gmux sever"." how to remove this error.
I followed the below link for installing disk space alert in opennms its not automatically alertin disk space so i followed the procedure below i getting such a error can somebody point out where im making mistake in installation
[url]
Im getting mail alert for allnode down events i opennms..but not gettting mail regarding disk &memory down events:
Stopping OpenNMS: Trying to stop OpenNMS but it's already stopped.
[ OK ]
Starting OpenNMS: Started OpenNMS, but it stopped running: for details see /opt/opennms/logs/daemon/output.log
I am using postfix as spam Mailscanner to protect my mail server running sendmail. The problem is that when I forward an email from MailScanner mail me back with the following error:
<postmaster@localhost.@mydomain.com.>... Real domain name required for sender address (in reply to MAIL FROM command)) Jul 27 13:15:59 smtp postfix/local[28465]: C68AC1000001: to=<root@smtp.mydomain.com>,
I recently built a cluster with Centos 5.3 and nodes that used different versions of the w83627ehf sensors chip. On some nodes sensors-detect detected the chip:
Found `Winbond W83627DHG Super IO Sensors' Success!(address 0x290, driver `w83627ehf')
But starting lm_sensors returned the error: Starting lm_sensors: No sensors found!
On other nodes sensors-detect did not detect the chip at all: Found unknown chip with ID 0xb073(logical device B has address 0x290, could be sensors)
I'm not very sure when this issue started. Anyway, the system finally boots and I haven't had any further problems, but I somehow notice the booting to be a bit slower since this error appeared and I don't like watching the red letters that say "failed" every time I switch the computer on. I googled this before posting it, and other users have had this issue, but the solutions that worked for them didn't work for me.
This is the content of my /etc/network/interfaces file: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback
