I have installed mpd on my Arch box and it starts correctly with "/etc/rc.d/mpd start" My clients (ncmpc,sonata and gmpc) connect. My problem is that I can't update the client - at least when I try I only get a partial update. I have around 5 gb of music but only 3 albums appear (2 different artists.)
My mpd.conf has the following:
I can't work out what to do next.
I am using ubuntu 9.10.While running a partial update through System->adminstration->update-manager. I am facing error as 'Error Authenticating some packages". Please find the attached, screenshot of the error and sources.list file output.
View 1 Replies View RelatedAfter a large partial update (including nvidia drivers as well as a lot of other stuff - sorry for the imprecision but it was long enough to merit stepping away to eat dinner), my computer crashed when I tried to shut it down, and now when I try to boot up, it takes me as far as the login screen (minus the logins) with the mouse pointer active. It plays the Ubuntu drums and then that's it for activity. The mouse moves with no problem but there's nothing to click on. Going into recovery mode causes the system to hang. I can only access my files via a live cd.
When the computer first crashed and before it goes to the almost-but-not-quite-a-login screen, it displays the following message:
Code:
/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 256
I'm finding it ironic that the error occurs in a "sanity check" because it's costing me mine. Is there a solution that doesn't involve a new install?
I'm running an Intel Celeron 1.7 GHz with 2 gigs of RAM and an nvidia MX4000 video card with 128 MB RAM (yes, its last OS was written in cuneiform ;p)
Just wondering if anyone else has this partial upgrade being offered to them: ffmpeg, libavdevice52, libpostproc51, libswscale0 are held back (grayed out) in Update Manager.
I only use Update Manager manager to see if there are any updates and then use sudo apt-get update, sudo apt-get-upgrade and sudo apt-get dist-upgrade to actually examine the updates as it shows if anything will be removed without anything to replace it.
And I know to never do a partial upgrade.
Update Manager displays "Partial Upgrade" with the files listed above grayed out.
I did use sudo apt-get-upgrade to install a few packages earlier that were safe to install and now -
sudo apt-get-upgrade currently gives this output:
Code:
The following packages have been kept back:
ffmpeg libavdevice52 libpostproc51 libswscale0
0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded
[Code]....
I am running Ubuntu 10.10
I am using an Intel WiFi Link 4965AGN built in adapter.
When I was prompted for a system-update I clicked Update and apparently something failed an only a partial-update happened. Now my wireless/Ethernet connections do not work. I tried enabling all Network Adapters but that option is no longer available in the "Preference/Administration" tab.
Note: I cannot access the internet at all on that partition so I can't download any updates from repositories.
Summary: Does a discrepancy between MySQL client library 5.0.x and MySQL server of 5.1.50 cause "inconsistent behavior", as reported by phpMyAdmin? The longer version: Windows Sysadmin taking the plunge into Linux. I tried to spare you all the rookie questions and did a fair bit of reading. I'm rather happy I was able to get CentOS 5.5 installed and running, configured iptables, got the kernel updated, Apache, MySQL and PHP installed. Then upgraded PHP to 5.2 after I figured out how repos and priorities work.
I got phpMyAdmin installed and running, then decided to upgrade from 2.11 to 3.3.7 but it keeps complaining that my MySQL client libraries are something like 5.0.63, while my server is 5.1.50, and this may cause "inconsistent behavior" or something of the like. So, feeling industrious, I decided to find an updated client.
MySQL-client-community-5.1.50-1.rhel5.i386.rpm
But it wouldn't let me install it as it conflicted with the default mysql-server installation. I also couldn't remove just the old client, to update to a newer one. So I blew away everything mysql on my server and installed the above client
MySQL-server-community-5.1.50-1.rhel5.i386.rpm
and that server file. I'm assuming I'm missing dependencies now as phpMyAdmin claims it can't load the mysql extension. Attempting to 'yum' php-mysql tried to install 'mysql' as a dependency, which immediately conflicted with the files I'd installed. At this point I'm wondering if I'm closing in on successfully installing a version that phpMyAdmin doesn't complain about, or if I should even care that it is complaining and just go back to all the repo versions of everything.
# rpm -e MySQL-shared-community-5.1.50-1.rhel5.i386.rpm
error: package MySQL-shared-community-5.1.50-1.rhel5.i386.rpm is not installed
I messed up and hit "ok" for a partial upgrade. My fault entirely.
Now Grub finds no kernel to boot to, only a disk diagnostic test runs when I try to boot.
Is there a way to reload a kernel to dev/sha1 from the live cd terminal?
I'd rather not lose the data on the drive with a fresh install if I don't have to.
I've install F10 to use it as server and router and found a strange problem on my XP machine which is behind the F10. I've tried to update my Lineage2 client from official server but the update crash, tried to open the web page it didn't open. Also tried to open microsoft web it didn't open. When i try to open the same pages on PC with F10 they open with no problem.
[Code]...
I've added my "Music" and "Video" folders to my media library in VLC which is useful, but it doesn't seem to update itself when I add/delete/rename files (using my file manager).
The only way I can find to update VLC's record/cache is to remove and re-add the Music/Video folder to the media library. Is there a better way?
I ran the automatic update today and it requested a restart afterwards. After the restart, I don't have any icons on my desktop, can't open windows other than the terminal. If I try to run software from the terminal, I get the following error.
/lib/libgcc_s.so.1: version 'GCC_4.2.0' not found (required by /usr/lib/libstdc++.so.6)
/lib/libgcc_s.so.1: version 'GCC_3.3' not found (required by /usr/lib/libstdc++.so.6)
I have seen "just removed the library with an issue" or recreate the links or try to reinstall. I am running fedora 12.
It seems that I really don't know how to update/reinstall a new library for my DigiKam.Since there is no .deb package, I would like to install Libraw-0.8.5 from source code (URL...) and it happens that I just don't know what to do.Please, help me to install this library so I can finally process the files from my new camera.
View 2 Replies View Relatedcan sm one explain abt the 7 temperature zones n hw to capture motherboard temperature in RHEL 4 update 3 using library ACPIs
View 1 Replies View Relatedhow to do Mysql, PHP, Apache installation configuration, module/library update
View 2 Replies View RelatedI need to get the libstdc++.so.5 library ( on a computer with Fedora 8 and don't wonder why it's so ancient,-there is a good reason for it) but I don't have Internet access from that computer, so I can't get to the online repo's.
However, I do still have the installation disk, and I'm typing this from a computer (SuSE 10) that is half a meter from the Fedora box.
I tried the "ADD/REMOVE Software" option on the menu, but it keeps on looking for the online repo and then if it doesn't get it, it fails.
Is it possible to get this library from the installation disk. How? Could I download the single package from the online repo onto the SuSE machine and then move it to the Fedora machine? How do I then tell the Fedora machine to "incorporate" it.
./configure script fails to configure libsf. Please check the following last few lines of configure script error.
But find command shows the following;
It seems the file libdb does exist. man dbopen displays man page for dbopen. I also tried to ln -s /usr/lib/libdb.a and libdb.so /lib dir but all were in vain.
I'm reading about shared, static, and dynamic libraries. What is SDL? Is it static, shared, or dynamic?
I always thought a library would be a lot of .h and .cpp files compiled separately into .o files and then if you compiled your own program you could use the -l parameter to link the library and it was all compiled together. Now I'm not so sure.
I don't even see any SDL .cpp files in my system anywhere. All I have are lots of SDL .h files in /usr/include/SDL and I don't really understand the code in them.
I'm making a wild guess here: SDL is a shared library. SDL itself is NOT compiled into my program, therefore SDL must be on any system my program tries to run on. When I compile and link SDL all it needs is the header files to know what SDL function and objects it can use. And then on every system it uses an already compiled SDL shared library thingy somewhere.
So... where is that part of SDL? All I can find are header files.
I'm thinking the advantage of shared libraries is that someone could say update SDL on their own system and take advantage of the new features without having to download new executables with the new version of SDL compiled into them for every program that uses SDL.
So if I'm making an editor and a game engine and they both use a lot of the same .cpp and .h files that I wrote and I'm tired of updating one and then the other and I need to turn them into a library, then a shared library might be kind of a silly solution. I could just make a static library. Right? Because it's not SDL. Nobody else is ever going to use this library.
I'd like to have my Samba client update Windows DNS then join in domain. Computer join in domain but DNS not update.
OS: OpenSUSE 11.3
Try after join in domain:
net ads dns register -d 3
[2010/08/18 20:47:17, 3] param/loadparm.c:9158(lp_load_ex)
lp_load_ex: refreshing parameters
[2010/08/18 20:47:17, 3] param/loadparm.c:4929(init_globals)
Initialising global parameters
[2010/08/18 20:47:17, 2] param/loadparm.c:4788(max_open_files)
rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
[2010/08/18 20:47:17.871064, 3] ../lib/util/params.c:550(pm_process)
params.cm_process() - Processing configuration file "/etc/samba/smb.conf"
[2010/08/18 20:47:17.874091, 3] param/loadparm.c:7842(do_section)
Processing section "[global]" .....
Windows Workstation update DNS this domain. DNS mydomain.ru resolved.
I am using dyndns to keep track of my smartphone's ip address. The idea is to be able to ssh into my home network, protected by an iptables firewall. If I use the command: # iptables -I INPUT 9 -s myname.dyndns.org -p tcp -m tcp --dport 22 -j ACCEPT it updates using the current ip address, but the next time I get an ip address update to my phone and update dyndns to properly provide nslookups, this is not being updated in iptables unless I restart my firewall. Is there a better way to do this?
View 3 Replies View RelatedI am trying out chrony as a replacement for openntpd as there is no longer an openntpd package in Debian Squeeze. Two questions:
1. Is there a necessity or equivalent to openntpd's "-s" option, where it forces the system's clock to the network time on daemon startup, regardless on how great the clock is off?
2. How do you configure as a client only, not as an ntp server at all? By default, it listens on UDP 123 and 323 (both ipv4 and ipv6) and definitely acts as a network time server (I can query remotely). I do not see anything obvious in the docs. Openntpd by default ran as a client daemon only.
Where are there good instructions to configure the DynDNS update client? It is not updating my IP number.
View 5 Replies View RelatedI loaded the Pre-Release version of Ubuntu 10.10.1 32 bit workstation. It ran mostly fine for about a 2 months. Then I did an online update and it told me that I had to reboot. When I did, I booted to a splash screen and then a dead machine with a black screen where control-alt-delete does nothing, no disk activity, no mouse, no keyboard, totally dead. Had to hit reset button. I booted to a suse partition and hacked the grub entry to remove the splash and silent to get more spew at boot time. The last thing before the screen goes black is starting NBD client. I have my email and various directories on my central server so I need NFS. Is there a way I can hack my way to get it to boot even without NFS temporarily to possibly rebuild the nbd kernel module? I have looked at the /var/log/ syslog, daemon, debug, kern messages and gdm log files and don't see any indication of why it crashed. Where else can I look?
View 3 Replies View RelatedHow can we convert a dynamic library (filename.so) to a static library (filename.a) using gnu gcc . Can we get a static library form a dynamic library . I saw a few post in which the conversion form a static library to a dynamic library is mentioned but, unfortunately, not the other way.
View 4 Replies View RelatedI have an older Dell Inspiron e1505. The hard-drive went bad years ago and I look to revive it. I purchased a new hard-drive and proceeded to install Windows XP Pro that I have a partial install of XP professional but do not have the key. Microsoft explained because I cannot find I would have to buy a new one instead of keeping my key within their Microsoft store. So instead of purchasing a new key I would like to install the latest version of Ubuntu and go the Linux route.
I downloaded the latest version(non pc I believe) and have it booting of the Cdrom. I am now stuck because it bypasses the cdrom /disk and starts to load XP home again. Will continue to research as I move forward but would definitely like some pointers on what I can do as far as removing the partial install of Windows XP home.
I am fairly new to linux but I want to write a function to find any file with only a partial name. I can only use sh shell and busybox applets for this.I could do something like the sad code below...
Code:
TEST_ONE=$(find /path/to/directory -name *$1*)
TEST_TWO=$(find /path/to/directory -name $1*)
TEST_THREE=$(find /path/to/directory -name *$1)
[code]....
fi I just made that up but obviously it is pretty bad I'm sure there is a much better way to do it but I just can't think of a way. I also would like to have the file found even if capital letters are used and the file is all lower case.
Having that old problem with the mouse theme defaulting to the old fugly default when compiz effects are on and while over the desktop area. I tried following: http://ubuntuforums.org/showthread.php?t=820245 there is absolutely nothing like that in General>General Options in ccsm. Nothing in simple either.
View 2 Replies View RelatedCurrently running 9.10 and am interested in 10.04 upgrade but download manager tells me this is a 1.2 GB download and I have just a wireless connection making this a lengthy and tedious affair.Is there any way of doing a partial upgrade bits at a time without having to go whole hog?
View 5 Replies View RelatedUpdate Manager gave the following message:
Code:
Not all updates can be installed
Run a partial upgrade, to install as many updates as possible.
This can be caused by:
* A previous upgrade which didn't complete
* Problems with some of the installed software
* Unofficial software packages not provided by Ubuntu
[Code]...
When I boot this machine with freshly installed 10.04 I get some of the panels displayed.
I can force Ubuntu to build them correctly by switching themes. I can then, if desired, switch back. This is an imperfect workaround and does not always do the trick. I have tried a few other tricks and nothing seems to work.
Always rebooting returns the problem (regardless of which theme is running at shutdown).
Something seemed to flash once at the blank space to the right where the panels end (along the right edge--a rectangular maybe), but it flashed and I only saw it once, but it would fit that space.
Finally, I can add items to the partial panels and they will not appear until I have run the workaround above.
I need a fix for this as the workaround is itself unreliable and far too much a hassle to use regularly. Oh, I tried just rebuilding the machine over and came to the same end.
Firefox is having trouble displaying characters. At times, a web page will display only partial of a certain character, and it will affect every character on the screen. In other words, sometimes when I load a page, the bottom half of all the 'i's or 'r's are missing. The problem persists when I refresh the page, and resolves on its own. It will happen to most web pages. Also, at times, a white or black stripe will run through some characters, usually a heading title on the page. I'm running Firefox 3.6.10 on Ubuntu 10.10. I did a complete reinstall of Ubuntu 10.10 when it came out (i.e. I reformatted and installed 10.10) and have been having this problem since then. Never had the problem with 10.04, which I had been running since May. Firefox and Ubuntu are both updated currently.
Please note the attachments, where in one there is a problem with the letter 'i', and in the other, on the Heading "Search New Posts" there are white lines running through the words.
When I set menus to be transparent, only part of them are as in this screenshot.
View 1 Replies View Related