Software :: Lost Viewing Panes On K3b / How Do I Get Them Back
Jan 8, 2010
I was trying to rip a couple of video dvd titles.I stopped to install transcode.Then when I started I had forgotten to take out my Suse 11.1 disk, I realised after I had already cancelled, that was the reason the programme was asking me to insert the video DVD.Anyway to cut a long story short, I had a mad 5 minutes clicking and have lost part of the screen.I have closed k3b and reopened it, but I can't get the panes back.I have lost the bar at the very top the left hand pane and the top right hand pane.
View 7 Replies
ADVERTISEMENT
Jun 5, 2010
Did you know that while in Nautilus 2.30.1 using Ubuntu 10.04 you can have split-pane by pressing the F3 key. You can copy files from one to the other. Here is a little video howto from LJ. [URL]
View 9 Replies
View Related
Jan 11, 2011
I'm trying to get tmux to open a certain set of panes an certain programs in those panes by default and open that way every time I run tmux. Is there any way to do this?
I read in the documentation commands for this, but i have no idea where to begin.
View 2 Replies
View Related
Jan 26, 2010
I was trying to free some memory as my /var was about to fill.I went to Add /remove software and ried to remove some of the unwanted software and it asked for dependency and i clicked ok.After a while i saw some of my aplication like Evolution,Empathy blackening and i killed the Uninstallation. I was sure by time that something wrong has happened and i did not switch off my monitor so that i can retain my application.I tried lot to increase teh /var so that i can update my yum and install some lost application but allin vain i tried Gparted which can only decrease the size .
I had 40 GB unallocated space so i tried to boot from Live Fedora 12 DVD and was able to see my all the files and filesystem.
All my data in /home was intact.I tried to go to grub and went to boot hte kernel and Initrd and was able to go to #root but again was not able to update the system as network was missing.The SYSTEM was Not booting and stuck in between.
Tried to change the /var to var1 copied /var content to /var1 and made changes in teh /etc/fstab still did not work ,so finally went to repair with Live cd but could not get "Linux rescue" anywhere not even to upgrade option so finally installed the New linux without touching / and /home partition rest were deleted and formatted for new instalation.Now i could not see my data in /home directory although i could see data in /root(old) and all ..i am now lost ..my data is nowhere ..please help me.I can only see /home(old) but it says empty and shows 6 GB unused and 3.3 GB used when seen in Gparted .
View 14 Replies
View Related
Jan 29, 2011
I shut down my laptop this morning and headed to the office and fired it back up to find that I no longer had the use of any of my usb ports! messages are saying that the ports have been disabled. curious if an update broke something? the ports have been working fine, I use a usb mouse instead of the touchpad most of the time.
View 2 Replies
View Related
Jul 16, 2010
Today I removed my panel at the top of my screen by mistake. The panel showed open programs and my firewall icon, which I liked. Does anyone know how I can get this back up please?
View 7 Replies
View Related
Jun 28, 2011
Alright so I lost a sd card that I had uploaded to my comp before it crashed but I wiped the card before I lost it and I want back what was on it..I have ran testdisk and photorec and it has only brought me back 5 or so pics, but when I search the card in deleted files through either program it lets me see the file names, and when I try to save it the computer doesn't read the jpeg file when I go to open the recovered file.
View 1 Replies
View Related
Jan 23, 2010
I am happy with ubuntu it's cool, but I want to go back to windows. I lost my windows cd. So I made a blank disc with an iso file. But the problem is. When I try to keep it inside my computer and restart it won't load. I think grub has something to do with this.
View 9 Replies
View Related
Mar 6, 2010
I was watching a video with VLC and my computer freezed. After five minutes, I restarted it.
Now I can't mount my external 500 GB hard disk code...
View 6 Replies
View Related
Oct 2, 2010
I have a harddisk which is partiotioned in C & D. I've installed WIN XP on C and WIN 7 on D. Then I installed Ubuntu 10.04 on D beside WIN 7. Now I can't access to WIN 7 and also to drive D in XIN XP and in Ubuntu.
What can I do to get back WIN 7 and drive D ?
View 9 Replies
View Related
Feb 5, 2011
Login in problems:
I was trying to fix the brightness on my toshiba T130 Satellite laptop and found these instruction [Note: I did not try XRANDR option]
If backlight control doesn't work with the 'XRANDR' option above, use this code...
Safe the file, run 'sudo update-grub' and reboot.
Credits: https://bugs.launchpad.net/ubuntu/+s...id/+bug/392948[/INDENT]http://www.linlap.com/wiki/toshiba+satellite+t130
However after running these instructions and rebooting my laptop I lost the GUI, and do not know how to get it back.
If it helps the loader screen with the 4 dots has gone slightly skewed, and I've downloaded the most recent update changes.
I can get GUI through recovery mode and running it in failsafex, but I don't think this is a good solution.
View 8 Replies
View Related
Feb 26, 2011
I'm using Windows 7 and Ubuntu in two differents partitions in my hard drive. I was on Windows 7 and decided to reboot. When the grub screen should have appeared, instead the computer rebooted itself. It continues to do so. I put Ubuntu 10.10 Live CD and it keeps "loading" forever, but doesn't hang. In the console, it said something like "input/output" error. I tried with my Win 7 DVD and it was the same: it doesn't reach the part where it shows the menu with all the installation options.
I tried with Gparted and it loaded fine. It showed all my partitions, but there wasn't (I think) more that I could have done with it. I tried then user Super Grub Boot. I finally could enter Ubuntu. Everything is fine except that it doesn't show my Window partition. It's like it doesn't exist anymore, so I can't backup my files. Now, I haven't tried loading Win 7 from Super Grub Boot (I'm going to do it just as soon as I post this), but this is pretty weird. Anyone have any idea what is going on and what can I do to this this?
View 5 Replies
View Related
Apr 23, 2011
I had everything backed up so it is no great disaster, but drop box lost a lot of my files. Some of the folders with missing files now have thumbs.db in them, but when you go to the dropbox site, you don't even see that.
I had thought about using dropbox as my main backup solution. That would be a big mistake.
View 3 Replies
View Related
May 17, 2011
I installed Ubuntu 11.04 on a usb stick and have been running it from there. I was messing around with the "Login Screen" utility and changed the session choice to "User defined session" (or something similar). I thought this would allow me to pick the session to use (Unity, Gnome) but that was wrong. So right now, when I login, I have a blank screen with no menu bars. If someone could give me the commandline command to run the "Login Screen", I should be able to switch it back.
View 2 Replies
View Related
Jun 20, 2011
I was running a patch of my wifi connection and now i have NO wifi at all. I am totally lost right now. i have been running throught all the threads but nothing is really working. Is there a way do a full system restore (like windows) that will undo all my mistakes? my wifi has always worked until i screwed something up!
View 5 Replies
View Related
Sep 16, 2009
Google brought me no love on this one, tried searching here with little luck as well. So I'm hoping somebody vastly more experienced than I can shed some light on my plight.
The situation:
I have a CentOS 5.3 x64 server running the latest cPanel which works fantastic. I issued a graceful reboot and the server came back up (according to the DC) just fine to a login prompt. Apparently the system lost all of its IP address configuration. Primary IP, secondary IP's gateway, you name it and it was gone. Now my secondary IP's were showing in cPanel after I had the DC re-enter my main IP address/gateway. But listed as not active due to the fact that they were not anywhere to be attached to the interface. i.e. eth0:1 eth0:2 etc and so on.
I have no idea where to begin looking for this problem and am afraid to reboot it again (at least until I get my lantronix spider up there). I've never experienced this with any of my other CentOS/cPanel servers either. All similar configurations CentOS 5.3 x64, latest cPanel as well. My hardware is all Supermicro gear as well and has been solid in the past.
Maybe I'm just missing something, granted I've only been managing Linux based servers for about two years now. This is actually the first real problem I've ran into on any Linux distro, they are normally pretty solid. So I assume it's a configuration error on my part somewhere.
View 2 Replies
View Related
Nov 2, 2010
I have a problem with a few up-to-date installations of CentOS 5.5. I have lost all md (software raid) devices on them some point in the past. They were working ok.
Now the 2 disks are seen as two separate disks, with no link between them.
# cat /proc/mdstat
Personalities :
unused devices: <none>
View 12 Replies
View Related
Jan 23, 2010
I am running ubuntu 9.1 on a Dell Dimension 2400. After installing ubuntu on the pc, it was automatically recognizing my router and connecting to the internet fine via ethernet. Then, my roommate unplugged the router and it won't recognize it. I can't access my router settings, and ubuntu is recognizing it as "inactive" but every other computer in the apartment runs fine. My PC uses a broadcom ethernet controller, and my router is a Linksys wireless N.
View 1 Replies
View Related
May 14, 2010
I would like to have your help.
I upgraded from 9.10 to 10.04 and lost my grub in between.
During the upgrade I installed grub on sda1.
Can you help me to recover my grub.
I inserted the contents of the RESULTS.txt here. code...
View 6 Replies
View Related
Jun 26, 2010
I use Lucid with Gnome. I lost the volume applet on the top panel. I tried to search for it under "Add to panel...", but couldn't find it.
View 3 Replies
View Related
Jul 13, 2010
I've accidentally deleted the network manager icon from my panel. It's still working - I'm getting a network connection - but I'd like the icon back.
I've tried re-starting gnome - the recommended soluton - but not joy.
View 2 Replies
View Related
Jul 29, 2010
So I am working on a clients PC, and after I saved their data on an external hard drive I left it plugged in while I reinstalled Windows for them.....I HATE Windows. Stupid OS doesnt know any better than to just go deleting everything. Ubuntu would have known better than to delete multiple hard drives like that.
Anyway, please tell me I can salvage this data for my client? It was probably just reformatted. The data should still be there right?
View 4 Replies
View Related
Sep 17, 2010
I upgraded my netbook (HP Mini 5101) from 9.10 to 10.04 yesterday. Everthing (including bluetooth) seemed to work, as it did before. Today I tried to install a 2.6.35 kernel from maverick backports (the kernel ppa), but it didn't work for me and I removed it again. Now my bluetooth is gone (bluetooth applet does not show any devices) but wireless still works.
I already tried to remove and reinstall the driver package via apt-get (sudo apt-get un/install bcmwl-kernel-source bcmwl-modaliases) but nothing helped. code...
View 2 Replies
View Related
Sep 21, 2010
I have a problem I don't know how to solve. Today I bought a netbook and while waiting for the new Ubuntu Unity release to come out, I thought of trying out Crunchbang instead of Windows that came with it. Browsing on my Ubuntu desktop machine, I found a guide for making Crunchbang live USB stick, and i followed the procedure. However, I made a very stupid mistake. The guide said I should enter the command:
sudo dd if=/path/to/iso/crunchbang-10-alpha-01-openbox-i686.iso of=/dev/sdX bs=4M;sync
where "of=...." part should be replaced with the name of the HDD. I forgot that I have an external HDD mounted and mistakenly copied the data to it.
After this, I cannot see the content of my external HDD anymore. Instead, i have this 620mb large Crunchbang-install device.
I know what I did was stupid, but is there a way to get the content of my HDD back? I have some valuable data on it.
View 4 Replies
View Related
Dec 8, 2010
A directory /test/test1 is created & under /test1 there are some files & subdirectories with data in it. I had copied the files (text & script files) with command as,
cp -irv /test/test1/.* /test as per the requirement but what i see in destinarion i.e, /test that no files or directory has been copied in /test & the files/directories is also removed from source i.e, /test/test1
so my query is how can i get the files/directories back with data?
View 6 Replies
View Related
Apr 15, 2010
After installing Fedora 12 from a live CD, I ended up that my Vista completly gone is.
In the grub loader, I cannot see my Vista boot record.
I thought when installing, I choose 'use free space', as there I reservered 7 gigabyte for Fedora.
I can see all the files including my Windows directories and home.
Is there a possibility that I can recover my Vista? and so, make it dual boot?
View 2 Replies
View Related
Apr 6, 2010
I just upgraded from Suse 10.x to 11.2. Unfortunately, I didn't use 10.2 much and I('m a bit overwhelmed by the upgrade. Any advise is greatly appreciated.
After my upgrade, I lost Internet access. I don't really know my way around too well, but I did try to ping my router, but had no success. (Although I can ping 127.0.0.1).
I'm guessing that this means network access is not configured, although it looks OK to me.
View 8 Replies
View Related
Jun 6, 2010
I've just had a phone call from an 8.04/win xp duel boot user who has lost the boot entry to xp after a 8.04 update. I guessed at a system upgrade but she checked and is still on Hardy. They write and only have the xp for printing as there is no Linux support for the cannon printer. Using the printer is important. I've said I'll pop round and try to sort it out. Any ideas how I can do this. Update grub in recovery mode maybe or if I need the command line what should I try? I'd like to know before calling as though I'm not quite a novice this isn't a problem I've had to cope with since grub 2 beta ( didn't solve it then either an am still using 9.04 ). Hacking legacy will be new to me. As this is a writers machine with all her work on it I'd regard it as a critical pc, don't want to mess things up for her.
View 8 Replies
View Related
Oct 22, 2010
i lost my soundbutton in ubuntu 10.10. how do i get this back;
View 2 Replies
View Related
Jan 25, 2011
I dual boot Windows and Ubuntu dual on my computer. I made the big mistake of moving a bunch of files directly from the ubuntu partition and now all those files are gone. How can I get them back?
View 1 Replies
View Related
