Software :: Linksys Wmp54gsv1_1 To Work With Ubuntu 9.1?
Feb 12, 2010
Okay so I've had very little experience with Ubuntu. I'm familiar with the GUI and such, and very few commands on terminal.
I did a bit of research on my card and its capabilities with Ubuntu. I've downloaded and installed "ndisgtk" and it works. I also found the proper "sys" and "inf" files to my card.
In addition to that I've blacklisted all of the free wireless drivers in Ubuntu.
When I try to load the "inf" file with ndisgtk, it says "unable to tell whether hardware is present or not".
View 2 Replies
ADVERTISEMENT
Jul 10, 2011
I have installed Ubuntu 11.04 and for several days have tried many, many different ways of installing my Linksys WPC 11 wireless card into my IBM Thinkpad T30 laptop.
I have got the wireless working by installing Ubuntu 8 and then upgrading to the current version, and I would assume some drivers are currently installed.
As usual though, the signal drops out after only a few minutes and I have to keep re-booting the laptop to continue what I'm doing.
View 7 Replies
View Related
May 13, 2010
this card has notoriously horrible linux support; how to fix this and nobody ever seems to get it work. But it was working natively on ubuntu, so I know it can be done. I just don't know *how*. I downloaded the isl3890usb firmware, placed it in /usr/local/lib/firmware or whatever the path was in the guide. Soon after, iwconfig was giving me an interface! However it stopped working at this point. I tried iwlist wlan0 scan, but it always just says "no scan results." I manually configure everything and dhclient just tells me "no offers recieved." It appears to have an interface but is just not working at all. Where do I go from here?
View 2 Replies
View Related
Dec 7, 2009
I have installed Fedora 12 on a Dell computer with an internal Broadcom wifi card. The installation fails to find the card and I don't find it listed among the available drivers. Any suggestions on how I can get the card working? Or, failing that how I can get the Linksys USB radio to work?
View 2 Replies
View Related
Feb 8, 2010
I've got an old laptop wich wireless adapter is a Gigabyte GN-WI01 GS MINI PCI(its chipset is Realtek RTL8169/8110, I believe) and I'm not able to make it run in Wifislax 3.1 Live CD. I downloaded the linux drivers for it and tried to install them following the instructions but when it came the time to execute configure.sh it told me that I had to actualize some kind of packets first(GK+ or something like that can't remember ). I also have another wireless usb adapter that I tried to use too. It's a Linksys WUSB54g v4(chipset: rt2570). I tried to follow a guide I found about making run an adapter like that on Wifislax 3.1 but when I had to "Force ralink rt73 on rt2500" it doesn't appear on my Live CD version, it appears "Force ralink rt73 on rt2570", dunno if it has something to be but I get an error while making it.
I don't know if it has to be with my laptop, my wireless adapters or my way of following the steps. If it has to be with my adapters I would like to buy some new one(not very expensive) that I won't have any problems running it on Wifislax and that will work on my old laptop(cause I just have that one and can't afford a new one).
View 9 Replies
View Related
Nov 26, 2009
First off I'd like to say if I hadn't put Fedora on my USB stick I'd never discovered that my old laptop had built in wifi, and it was just disabled in the BIOS. I was originally trying to get my Linksys WEC600n card to work. Once I turned on the internal wifi, and took out the linksys card, fedora picked it up right away. My problem is when I try going to websites they won't work, except for FedoraProject. (If I try to navigate to the FP forums it doesn't work either.) I'm not sure what would be the cause of this, so I have no idea where to start.
1. It had my wireless network in the list.
2. I put in my WEP key.
3. It appeared to connect fine.
4. Websites won't load.
5. ?
View 1 Replies
View Related
Jun 20, 2009
I'm having trouble getting my wifi devices to work on my 128bit WEP network. I have a new Thinkpad T400, with an internal Intel PRO/Wireless 5100 AGN. I also have some cardbus cards: a Lucent ORiNOCO Gold, a Linksys Wireless-G, and a TRENDnet TEW-421PC. I have them set up as interfaces eth2, eth1, and eth3. (The TRENDnet isn't recognised as a network card at all, so no interface for it.) I have installed the latest firmware for the Linksys card.
The /etc/sysconfig/network-scripts/ifcfg-* files are virtually identical for all of them, differing only in the HWADDR and DEVICE lines. So here's the behaviour:
1. The Lucent card comes up just fine.
2. The internal 5100AGN and the Linksys cards won't come up, and watching with iwconfig shows that they're either associated with my AP OR they've got an encryption key set -- but not both.
3. When trying to bring up the 5100AGN, I get the following messages:
iwlagn: index 0 not used in uCode key table
iwlagn: index 3 not used in uCode key table
/var/log/messages shows DHCPDISCOVER requests being sent, but they're bound to fail since the association with the AP with WEP isn't being completed. And yes, the ifcfg-* files really *are* identical except for the DEVICE and HWADDR lines. The /etc/udev/rules.d/70-persistent-net.rules file correctly maps the interfaces to the MAC addresses. So why does my antique ORiNOCO card work and thew newer ones fail? How can I track down what's being done wrong/not being done?
View 4 Replies
View Related
Jun 5, 2010
I'm trying to get a Linksys Wireless USB Network Adapter WUSB54G to work on Ubuntu 10.
View 4 Replies
View Related
May 4, 2011
I see a bunch of posts about WUSB600N, often telling folks to download and compile proprietary drivers from ralink's website. With Ubuntu 11.04, getting WUSB600N to work might be as simple as disabling rt2870sta (for rev1). If you have rev 2 card, driver to disable is I believe rt3572sta. Even if you need to recompile drivers by hand, the right thing to do is to first try nightly build of rt2x00 drivers from [URL], and fall back to ralink provided drivers only if things do not work out with rt2x00 drivers. I saw recent updates on rt2x00 mailing list for rt3572 chip, give it a try if you have rev 2 card.
WUSB600N rev 1 (rt2870 chip) should "just work" with rt2x00 driver included with 2.6.38 kernel in Ubuntu 11.04. At least it works for me. You may need to blacklist rt2870sta driver from staging directory so that it does not load and interfere with rt2x00 drivers. There's one small annoying issue with power save mode on rt2870 chip when rt2x00 is in use, which seems to have just been fixed upstream. Most users will never notice it, but if you do notice card re-connecting to AP every 10-20 minutes or so, simply disable power saving, and all will be smooth (iwconfig wlan0 power off). If you have an older Ubuntu release (kernel 2.6.35) and rev 1 card, you should be able to download nightly build of rt2x00 driver from [URL]. It worked for me just fine with previous Ubuntu releases.
View 1 Replies
View Related
Mar 13, 2010
I have a DSL modem with four ports and a built-in wireless router downstairs. It works great: I have wired Ethernet for my PCs downstairs (all plugged in directly to the DSL modem); my son has great wireless access upstairs (using the built-in wireless in his laptop). PROBLEM: I want to add another, desktop, PC upstairs. I've been trying to use wireless, with a plug-in a Linksys USB stick. It doesn't work worth crap.
I'm considering a) getting another phone jack upstairs, and moving my DSL modem there, or b) stringing some CAT-5 cable from the modem downstairs to the PC upstairs. Putting a wireless PCI card in my upstairs desktop PC might also solve the problem, but the PC only has one PCI slot, and I'd rather keep it free, if at all possible.
QUESTION: Is there any kind of "wireless repeater", where I can a) get wireless access from my DSL modem/wireless base station downstairs, and b) give me some spare Ethernet ports, so I can plug in desktop PC (so the PC can have a wired Ethernet connection)? POSSIBLE SOLUTION: I have an old Linksys WRT54G router that I'm not using. Q: Is there any way to configure it for this purpose? Q: Would it be possible to use it for this purpose if I installed OpenWRT?
View 1 Replies
View Related
Dec 1, 2010
I'm trying to connect to a friend's Linksys WAG160N router using Ubuntu 10.10, but it's just refusing to connect. I can connect to other wireless networks fine - it seems to just be this router. The wireless indicator applet thing shows that I'm trying to connect, but the password box always just pops up again and again. I'm certain I've got the password correct and am able to connect under OSX on the same computer. Connecting to it via ethernet also works fine.
View 1 Replies
View Related
May 22, 2010
Ubuntu 10.04 not seeing my WUSB300N. What is the Easiest way to get this working?
View 1 Replies
View Related
Feb 20, 2010
I have loaded ubuntu 9.10, and am not getting internet from my router using a linksys EG1032. I have found articles stating that i should use the sk (URL...) or nge URL...)drivers. According to the instructions i found, they require that i make changes to my kernel config. I do not know how to do that, or if doing so is wise.If someone would help me figure out how to connect this NIC card.
View 7 Replies
View Related
Mar 25, 2010
My first Ubuntu/Mythbuntu install. Installed OS, plugged in linksys wireless G adapter. It finds the network but cannot connect. Discovered wireless priviledges while setting up admin/user accounts. Should be ready to go. or not, I'm thinking it needs a driver but
1) in linux? certainly not in Fedora.
2) If it can see the network it doesn't need a driver,
My settings are wrong or I'm missing something. SSID is set in settings. Do I need mac address and BSSID?
View 1 Replies
View Related
May 14, 2010
I just installed Ubuntu 10.04 on my formerly XP system, and I'm trying to get my wireless network working. I have a Linksys WUSB11 v2.6 wireless adapter connected by USB to the system.
The system networking icon reports "No wired networks".
I'm not sure whether or not the system sees the USB ports... If so, it apparently doesn't recognize the adapter.
I saw a few posts that indicated that this adapter didn't work on 10.04 but it had worked on 9.04.
I'm looking for any info to get this working, including any or all of the following:
* How to determine if the system sees the USB ports (or is it "obvious" that it does)
* Should the wireless adapter work just by plugging it in?
* How to troubleshoot the networking adapter to get it working
* (If downgrading to 9.04 is likely to solve the problem) how to downgrade to 9.04 from 10.04...
View 9 Replies
View Related
Jun 8, 2010
The Linksys USB Wifi Adapter (WUSB11 v2. does not work with UBUNTU.
I am using UBUNTU DESKTOP 64-bit (x86_64) 10.04, but I think it is not working in the 32-bit version as well.
I really love to get my Ubuntu work with my 64-bit hardware....
View 3 Replies
View Related
Jul 13, 2010
Previously I had my desktop hooked up to a nearby router via an ethernet cord with my parents' computer having a wireless usb adapter to connect (This thing: [uRL]). We just moved and our setup has reversed (router is near their computer, I am using the usb adapter). I just installed the latest Ubuntu and now I can't get the usb adapter to work. I'm very new to Linux and I have no idea what to do. I think this is the same usb adapter.
View 1 Replies
View Related
Jul 16, 2010
I just bought Linksys WAG160N ADSL 2+ Router and modem device. It came with an setup installation CD which is not running on ubuntu. In the manual it is written that it will run only under windows and Mac OS. I have only Ubuntu on my laptop.
I need to run the setup CD to go ahead. I searched more than three hours to find out how to run this CD so that I can complete the setup of my new modem-router but did not find any solution.
View 9 Replies
View Related
Sep 2, 2010
My old ubuntu laptop beeps 3 time on startup and then freezes. This forced me to install 10.04 on a new laptop. Now I can't get the linksys wpc54gs ver 2 to get connect. I can see the router with a padlock by it. I pretty sure I have the correct password in the right spot. I can access the internet with the wire connection. I'm sure it something simple I forgot from before when the card was working in the old laptop.
View 2 Replies
View Related
Sep 3, 2010
I think lightning may have killed it. It was working fine. Now I cant get it recognized no matter what I do. It also quit working in Win XP where I never had a problem with it because it had its own connection software.
dmesg yields this-
RTUSB disconnect successfully
[ 312.876034] usb 2-1: new full speed USB device using uhci_hcd and address 7
[ 312.996021] usb 2-1: device descriptor read/64, error -71
[ 313.220031] usb 2-1: device descriptor read/64, error -71
[ 313.436038] usb 2-1: new full speed USB device using uhci_hcd and address 8
[ 313.556025] usb 2-1: device descriptor read/64, error -71
[ 313.780031] usb 2-1: device descriptor read/64, error -71
[ 313.996032] usb 2-1: new full speed USB device using uhci_hcd and address 9
[ 314.404022] usb 2-1: device not accepting address 9, error -71
[ 314.516021] usb 2-1: new full speed USB device using uhci_hcd and address 10
[ 314.924029] usb 2-1: device not accepting address 10, error -71
[ 314.924046] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 343.664017] pan0: no IPv6 routers present
[ 809.024049] usb 1-1: new high speed USB device using ehci_hcd and address 10
[ 809.182271] usb 1-1: configuration #1 chosen from 1 choice
[ 809.182837]
[ 809.182839]
[ 809.182840] === pAd = ffffc20020b41000, size = 598568 ===
[ 809.182841]
[ 809.182845] <-- RTMPAllocAdapterBlock, Status=0
guest3@guest3-desktop:~$
View 4 Replies
View Related
Nov 11, 2010
I have a linksys wireless-b wmp11 network card. Can anyone tell me how to get this up and running? Maverick is up to date as of yesterday and I have the cd that came with the card. I have no way to access the internet on the machine. I am typing this from my laptop.
View 2 Replies
View Related
Feb 13, 2011
I tried out ubuntu and I was beyond impressed with this OS. I decided it was time to do a complete migration to ubuntu. I installed Ubuntu 10.10 on my HP laptop and everything went great. It detected all the drivers and my laptop is working in tip top shape. I decided to install ubuntu on a custom PC I recently bought (used for Java development), and that is when I started to run into problems. These are the specs on my custom pc:
[Code].....
I am using Ubuntu 10.10 64-bit edition on the system. First problem I am having is there is no audio on my system. For this card I'm using an HDMI cable to connect it to my screen. I installed the NVIDIA proprietary drivers and there was no audio. I reverted back to drivers I found on the NVIDIA website and still there is no audio. Second problem I am having is attributed to the wifi card I am using (I think). I keep getting this message on boot after post (and on the terminal after I switch off the X server by stopping gdm):
[Code].....
However, after the system boots I can connect to the internet.
View 1 Replies
View Related
Feb 18, 2011
Here is the situation: I am currently running Ubuntu 10.10 64 bit. I'm trying to get my Linksys AE1000 to run correctly. I have followed many tutorials but most notably was:[URL].. lsmod shows that rt3572sta is loaded. network manager in gnome is able to find my router. my problem occurs when it tries to connect to the router using wpa2 security. It continually asks for the wireless password then will freeze the system after a number of attempts. After digging in for a bit, I was able to dig out a dmesg trapping the error:
BUG: unable to handle kernel paging request at ffffcfb0138af1ec
IP: [<ffffffffa021c7e8>] Cntl0idRTBssidProc+0x78/0x570 [rt3572sta]
PGD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu7/cache/index2/shared_cpu_map
CPU 2
I really don't see the need to continue on with those error messages lsmod still shows rt3572sta after the failure. In case anyone wants to see the changes I have made to the files before the make, I have included them. but changed the extension to "txt" to accommodate the up-loader and my rt_linux is too big to fit here, just not that it was 2 lines that were changed to work with the kernel. If anyone wants to know what I mean by the system freezes, I do mean just that. The mouse will continue to work, but I am then unable to open any programs, unable to reboot the computer. it requires a hard reset.
I have uninstalled the drivers, installed them, make them, make install them, make clean, start from scratch a few times, and am getting no give here.
View 7 Replies
View Related
Feb 25, 2011
I am dual booting XP and Ubuntu 10.10 64bit on a Dell Latitude E6410 and I have a Linksys WRT120N router connected to my Modem.
So the weird thing is, under XP I can use the internet while connected to my router. Under Ubuntu I can't use the internet while connected to my router. But I can use the internet in Ubuntu if I connect to my neighbor's router called "linksys". So something happens when I connect to my router that makes Ubuntu not able to access the internet. But if I'm connected to my Neighbors router or if I use XP while connected to my router I can use the internet.
I have been using Ubuntu for about a year, so I'm getting better but still a noob. I've tried to figure out what's going on by looking at other forums and posts and trying to see if anyone has solved this. So far I've had no luck. This is also the first of many problem I have encountered that I have been unable to solve using online posts, and is the first problem that I have had to resorted to creating a post to try and fix.
View 1 Replies
View Related
Apr 1, 2011
I connect to multiple wireless system each day but when I encounter a Linksys-n router the computer will recognize it and connect but does not go online.
Does this give any clue for why it will not connect?
Code:
802.11a/b/g
System wireless is: Toshiba Satellite M115-S3094 with Intel PRO/Wireless 3945ABG (802.11a/b/g), Ubuntu 10.04
View 1 Replies
View Related
Jan 25, 2010
I have recently purchased a Linksys WUSB100 for my Linux OS(8.04) and need assistance in setting it up. I am new to linux and would appreciate a step-by-step instruction on getting in working and need any neccessary drivers i may need. I really like using linux but just would like my wireless usb adapter to work.
View 9 Replies
View Related
Feb 3, 2011
i'm very new at this and tried to install Linksys WUSB600N v2what i would like to know how uninstall any drivers/ software i may have already put on the os. how can i verifry that the device is functional after installing drivers.
View 1 Replies
View Related
Jan 29, 2010
I have a linksys wusb100 and need to set it up on ubuntu 8.04 and 9.10.
View 4 Replies
View Related
Apr 9, 2009
I am net to this whole Linux thing. I cant seem to connect to my Linksys router. Not sure if I have to call Linksys or what.Mine is a WRT54GS
View 1 Replies
View Related
Mar 21, 2011
Does anybody know where to find Linksys wpc54g driver for Ubuntu 10.10?
View 3 Replies
View Related
