Software :: HDMI Driver For Benq Monitor G2420hd On Opensuse 11.x?
Jun 12, 2010
How can the benq monitor g2420hd be detected/used by opensuse 11.2x 64 bit ? graphics card is ATI Radeon HD 3200 Graphics with hdmi output connector
Steps to Reproduce:
- Attach moniter to laptop via hdmi cable.
- Turn monitor power on.
- power on laptop
Actual Results:no output on external monitor. Expected Resultsutput on external monitor.
xrandr shows
# xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
VGA-0 disconnected (normal left inverted right x axis y axis)
[Code]...
View 2 Replies
ADVERTISEMENT
Mar 6, 2011
I'm currently using ubuntu 10.04 version. I've recently purchased a BenQ E2200HD monitor. However, the monitor is unable to configure a resolution higher than 800x600. I've tried changing it via 'preferences' - 'monitor' etc. The monitor model is 'unknown'. and the highest resolution available is the 800x600.
I've tried changing it manually, but it says x.cong file does not exist. Xrandr doesnt seem to work either. Or i would get CTRC 262. My current set up is, intel i5 2600, 4GB Ram, Nvidia GTS 240. I'm pretty certain, my graphics card (despite being in the low end) can support HD resolution. Even if it can't, it surely can support a resolution higher than 800x600.
View 7 Replies
View Related
Jun 26, 2010
Here is the output of alsa-info.sh:
[url]
HDMI video out is fine, HDMI audio is a no go.
View 2 Replies
View Related
Nov 13, 2015
I noticed that Debian 8 has a significant bug related to detecting presence of display(s). Today, I woke my computer from sleep while the LCD monitor was unplugged from power (the monitor is connected via DVI) then I powered the monitor but nothing was displayed. Next, I connected another monitor via HDMI and both screens started working. However after disconnecting HDMI cable from the second monitor the first one with DVI stopped showing anything. The conclusion of this situation is that HDMI monitor must be connected all the time.
I thought that this is caused by graphics driver, but I experienced the problem on different machines, one with nvidia driver and DVI, and the second with default free driver and DisplayPort.
I just checked that this is related to KDE. After switching to console using ctrl+alt+f1 the screen turns on, but when I am going back via ctrl+alt+f7 the screen disappears.
View 2 Replies
View Related
Aug 16, 2015
Setup:
I'm using i386 Jessie Debian, have an i7 Intel processor and Gtx 745 4gb NVidia GPU.
I am running with nomodeset due to blurring issue but issue occured without nomodeset too.
Problem:
When I start Debian with just a monitor in the HDMI slot it doesn't recognize the monitor and keeps the monitor at 1024x768.
When I start Debian with monitor in both DVI and HDMI slot it only activates the DVI monitor (with proper resolution). PC has no VGA I have no DP cable.
xrandr:
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1920 x 1080, maximum 1920 x 1080
default connected primary 1920x1080+0+0 0mm x 0mm
1920x1080 0.00*
1280x1024 0.00
1024x768 0.00
800x600 0.00
640x480 0.00
Which is my dvi monitor, no other screens detected. Is there any way to get the HDMI to run properly?
View 1 Replies
View Related
Jan 13, 2016
My monitor (Dell U2412M) has a VGA port, a display port and a DVI port. I can connect it to my laptop with VGA, no problem, but I'd rather use one of the other ports. I have a HDMI-to-DVI cable, so I tried that. That didn't work with my laptop, so I tested this HDMI-to-DVI cable with my raspberry pi, and that works perfectly. So, the problem is probably not the cable and not the DVI port on the monitor.
What happens when I plug the HDMI-to-DVI cable into my laptop is a bit weird. It's not a blank screen or anything, but part of the messages I see during boot. The last lines on the screen (the others relate to stuff that is probably not relevant for this issue), are these:
Code:
Select all[ 10.823974] [drm] nouveau 0000:01:00.0: 0x7232: i2c wr fail: -6
[ 10.825122] [drm] nouveau 0000:01:00.0: 0x7244: i2c wr fail: -6
[ 11.487584] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
I have had quite a bit of trouble with my GPU on this laptop, and as far as I can tell, the laptop does not use the nvidia card but rather has defaulted to the on board intel chip. Could these issues be connected?
View 1 Replies
View Related
Dec 28, 2010
I just installed a new GT240 w/HDMI and I have a new Vh232H monitor w/HDMII connected the video card and monitor via HDMI cable and started the computer.Nothing.The monitor is not getting a signal via HDMI.
View 1 Replies
View Related
May 13, 2011
the HDMI sound just doesn't work with PHILIPS LCD panel, but works fine with computer LCD monitor. I've tried following the numerous threads on those forums but in the end couldn't get any sound from TV. Sound plays fine if I plug it in windows 7 laptop.
Current system state:
BIOS settings for Azalia internal+external
Natty with all updates
Recompiled alsa 1.0.24 via alsa upgrade script
pulseaudio
probe_masked hdmi device (there're also analog and S/PDIF devices on Relatek chip, but they are not loaded with current configuration)NVidia current (270.41.06)
aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
[code]....
Same results were observed on ubuntu alsa 1.0.24
View 6 Replies
View Related
May 7, 2015
Where the script is for Gnome 3. When I plug the HDMI cable, the desktop expands to include both, but disables the backlight on the laptop monitor. I have to restart gdm3 or the laptop for the brightness control to bring it back up. First, why would it turn brightness to 0, and how do I change the default of that so it stops. I plug and unplug the HDMI regualarly while I wait for a new desktop and the laptop has to pull double duty.
I just switched from Ubuntu 14.10. It never blacked out a screen on plug in or removing. That means that there must be some way to do it, however, it used Unity and this is Gnome 3.
I installed KDE. It works as well. I will use it for now, but would like to get Gnome 3 to work. My default is gdm but I think I saw I can switch it to kdm.
View 0 Replies
View Related
Jun 30, 2014
Ok so I just installed Debian 7.5 on my laptop and encountered several problems.
First off was the problem with GNOME 3, GNOME 3 failed to load.
Second problem was that the system does not recognize an external monitor via hdmi. Via VGA I do not know do not have a cable to try it out.
Third problem was that my wireless was no recognized.
Dell Inspiron 5537 Laptop
wireless: Network controller: Atheros Communications Inc. AR9565 Wireless Network Adapter (rev 01)
Graphics card: VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09) from the 4xxx series
System: 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u2 x86_64 GNU/Linux
Before I had Fedora, but only cuz all the devices were recognized by default, for a while now I wanted to switch over to Debian but as I came to relize my hardware for some reason is not working.
View 2 Replies
View Related
Jul 21, 2011
I am running 11.04 on a new Gateway with 8 gigs of ram. It is a solo installation. The monitor is connected via an HDMI cable. Everything was great (installation running smoothly for over a month) until last night. I just installed a netgear router and was setting it up with the system to try to get Stanza on my IPAD to connect to Calibre. Anyway, i suffered a severe freeze up warranting a hard boot. I could see the drive working, ancillary drives lit up, keyboard lit up so I know the system is working. The monitor did not come on, It shows a yellow light indication no signal. It is a 28" Hansspree. I tested the monitor by hooking it to a laptop. The monitor is fine. I cannot see anything on the screen so I can't boot to repair mode or use a CD. There is no signal.
View 1 Replies
View Related
Dec 31, 2010
I have a small 'nettop' computer that only has a HDMI output. The only monitors I have only have VGA input. Is there a way to use a HDMI-to-VGA or HDMI-to-DVI + DVI-to-VGA connection setup to hookup this computer to my monitor?Let me make it clear that I am not looking for a high-quality, high-definition display. This is going to be hooked up to a monitor only until I have the system up and running and then it'll be a ssh-only headless server
View 3 Replies
View Related
Aug 6, 2011
I have a Dell mini 10 netbook that I am trying to set up as a temporary HTPC. Using XP, I can send the video and audio over the HDMI connection, but when I attempt to do so from Ubuntu, there is not an option for a different monitor.
View 3 Replies
View Related
Jan 21, 2010
Mobo - Asus M4A78-EATI Radeon HD3300Sumsung 2494HM 24" LCD displayFedora 12 LinuxAMD Phenom II X4 955HDMI inputWhere can I find a driver for HDMI?The display works without much problem except half of the top and bottom bars as well as both left and right screen edge can't be seen. Adjusting high pixel size value on both top and bottom bars can partially solve the problem.
View 2 Replies
View Related
Nov 10, 2010
I want to know whether by default Linux supports HDMI? If yes, where can I find HDMI support in Linux driver code?
View 2 Replies
View Related
Feb 5, 2011
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies
View Related
Mar 11, 2010
I'm trying to use a monitor on the HDMI port of my Asus laptop which has Intel integrated graphics.
It doesn't detect the monitor using the display utility.
View 2 Replies
View Related
Aug 5, 2010
Under Fedora 12, I have installed the proprietary NVIDIA graphics driver successfully and am now attempting to use the onboard HDMI output. (The board has HDMI and VGA out built in.) I am getting a clear picture on the TV screen, although the edge of the screen output hangs off all edges of the physical screen. The HDMI audio output is being detected, but no sound come out of the TV when I switch the sound output from the Analog Sterio Duplex to HDMI Output in the Sound Preferences. Any suggestions, and what further information is required?
View 9 Replies
View Related
Jun 22, 2010
My new Benq DC E1050 camera will not connect to either of my Debian Unstable fully updated systems. It connects OK to a Windows 2000 PC and to my Elonex OneT+ netbook running 3MX. I can access the card in a card reader but when I connect the camera it flashes up a "USB error" message and switches itself off. On the PC side dmesg|tail -60 gives me
Quote:
[ 1991.144290] usb 2-2.3: new high speed USB device using ehci_hcd and address 5
[ 1991.236929] usb 2-2.3: New USB device found, idVendor=04a5, idProduct=30b8
[ 1991.236931] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1991.236934] usb 2-2.3: Product: DC E1050
[ 1991.236936] usb 2-2.3: Manufacturer: BenQ
[Code]...
View 3 Replies
View Related
Apr 27, 2010
how to run benq scanner 5000 and web cam im ubuntu
View 1 Replies
View Related
Nov 19, 2010
i have installed Ubuntu 10.04 on a Benq Joybook S72. After adding radeon-kms.conf everything works fine except the sound. I read a lot of websites but found no solution for my problem. The audiosettings and the alsamixer a adjusted right but the is no sound neither from the spaeakers nor from a plugged in headphone. I have attached some details:
Code:
lsb_release -d
Description: Ubuntu 10.04.1 LTS
uname -r
2.6.32-25-generic
[Code]....
View 2 Replies
View Related
Jan 2, 2010
I try to stay max 3 releases behind with Fedora, and now it is time to upgrade from a well behaving Fedora 8 to Fedora 11, not to slip too far behind. I have an Intel motherboard with a 82865G video chip. My display is a BenQ FP731. Fedora 8 the display works nicely giving 1280x1024 resolution at 72 Hz. On Fedora 11 the 865G chip ensists on setting the refresh rate to 75 Hz. I have copied the xorg.conf I use in Fedora 8 to /etc/x11/xorg.conf in the Fedora 11 installation. The chip sets itself to 60 Hz or 75 Hz, but not the desired 72 Hz which would give clear picture. What am I missing here?
Below a copy of my xorg.conf that gives the crystal clear and desired 1280x1024 @ 72Hz in Fedora 8 but gives a shivering and unusable 1280 x 1024 @ 75 Hz in Fedora 11:
---- clip clip ----
# Xorg configuration created by system-config-display
#Section "Module"
#Load "glx"
#Load "dri"
#EndSection
#Section "Serverflags"
[Code]....
View 2 Replies
View Related
Feb 21, 2010
I'm trying to get my Sound working with HDMI-connection. Got an Nividia 8600M GT on Ubuntu 9.10. Here is what aplay -l says:
[Code]....
View 4 Replies
View Related
May 25, 2010
first off, I wanna say that Fedora 12 really impresses me. I am a longtime Ubuntu User and Fedora really suprised me especially in terms of speed. Unfortunately my sound is not working. I had this problem a long time in Ubuntu, too. Then I discovered that I only had to switch off Exchange Front/ Surround in the alsamixer and everything worked fine. However, with the arrival of PulseAudio I don't get any sound from my speakers.
I went through some Guides but nothing seems to work. When I play an audio file I can see the amplitude going up and down in the Volume Meter of PulseAudio. So I think PulseAudio is working on the application side.
with
Code:
alsamixer -c 0
I can see that everything is set as it was in the passed for my soundcard. Exchange Front / Surround is switched off.
Code:
cat /proc/asound/
[Code]...
I hope you have any suggestions. Usually I look through the net till I find a solution. This time, however, I don't really know what to search for, since I tried everything I found except getting rid of PulseAudio which is my last option.
View 3 Replies
View Related
Jan 8, 2010
My scanner is Benq 5000 ,the default scanning software (xsane) give me the following message whenever I plug the scanner to the pc :
Failed to Open Device 'Snapscan:libusb:005:002' Invalid Argument.
I tried the gnome image scanning software too but it didn't recognize the scanner at all. The only software that worked is vuescan but unfortunately it is non-free software !!!!
View 4 Replies
View Related
Oct 22, 2010
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
View 3 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
Jan 21, 2011
I have just installed Os 11.3, it is my first time to try Linux. Install went fine have Dual Boot Win7 and openSuse 11.3 KDE I have a 26" TFT TV as Monitor 1 DVI and Dell 16" as Monitor 2 VGA all working fine . Autoconfig started and TV display vanished, install finished and went into display settings to check problem and for some reason it is saying both displays are on my 16" Dell. I will Add Screen Shot to show problem. wanted to switch to Linux for years but never had the guts, i was hoping to learn Linux with this distro and when have a grip on it drop windows and use Linux as Primary.
View 4 Replies
View Related
Feb 8, 2011
I realise this is an issue that has been covered a lot, one way or another, but at least from what I've been able to find, most of the discussion centres around getting HDMI audio to work. However, I have problems even getting the video to work from my laptop's HDMI output.
I have an HP dv6z-se, with an ATI Mobility Radeon HD 6550 (1 Gb) video card and using F14/KDE. My problem is that when I go to System Settings/Display/Monitor, Fedora doesn't actually seem to realise my computer even has an HDMI output and only displays options for VGA and my integrated screen.
When I plug it into my LCD screen, sometimes I get a 'No Signal' message and sometimes I get garbled static and a message about unrecognised input and the frequency it's coming at.
I read elsewhere in the forum that someone was able to get video working by editing their xorg.conf file, so I went in and tried to see if I could replicate that, but none of the files in my xorg.conf.d folder had anything related to video outputs (as far as I can tell at this point).
View 10 Replies
View Related
Dec 9, 2010
i want to connect my laptop to the lcd using hdmiI have nvidia video card 9200 gs and the driver is installedafter connecting both together nothing happens!do i have to change anything in the system or display settings?
View 8 Replies
View Related
