I have an ATI Radeon HD4670 graphics card. I am trying to run OpenCL on it, so I installed the ati driver 11.4, and the AMD app sdk 2.4, and then rebooted. Now, when I try to run one of the samples, it says this error message: GPU not found. Falling back to CPU device I obviously have a GPU, as I have used it before with version 2.3 of the ati stream sdk. How can I make it recognize my GPU?
View 1 RepliesI'm a new Mandriva user,and have no clue about Linux system,but to be honest I don't want to use Windows product anymore. So I got the Mandriva 1 Spring Gnome,and installed it on my DELL Optiplex Desktop,works fine and very fast,therefore I decided to do the same with my Studio XPS 1640,but after I got a dark screen,so I used an external display(My TV) then realized that it doesn't support the video card on it ( ATI Radeon HD4670 ),and I don't know what to do.
View 1 Replies View RelatedI have a desktop PC which initially had the Intel D946gzis mobo, its chipset as video controller, some RAM and so. There I installed Debian without a problem alongside WindowsXP.
I've bought an ASUS HD 4670 video card, installed it on the PC and now the installed Debian does not work, while the Ubuntu live CD refuses to run no matter if I set acpi, apic on or off... it throws me some low memory corruption at position just like shown here. With normal configuration, Debian throws kernel panic (keyboard lights blinking). Anyone have faced this before? Ideas? Thanks!! (meanwhile, debian hides in a virtualbox :'( )
Edited: Tried Ubuntu 9.10 x64 (due to the fact i've a core2duo at 2GHz) and it throws a kernel-panic to me (flashing caps and num LEDs). On screen, can be read different lines with things like:
[ 1.957161] [] rb_erase+0xd6/0x160
[ 1.957266] [] page_fault+0x25/0x30
Could it be something about this new video card having ddr3?
I replaced an ATI Radeon 9550 with a Radeon X1300/X1550, in hopes of better performance.
My System: P4@3GHz, 1.5Gb RAM, Fedora 12, kernel 2.6.32.10-90.fc12.
Faults: Screen refresh is extremely low. Glxgears outputs 25 FPS. Dragging windows around is sometimes really slow.
What I did so far, in hope of fixing it:
1. Installed 'system-config-display', for providing an xorg.conf
2. Did: yum --enablerepo=rawhide update mesa-dri-drivers-experimental mesa*, fixing this, but to no avail...
I cannot find any errors in the log...I don't know what to do...
I am posting my Xorg.conf, Xorg.0.log and Glxinfo through links to pastebin.com
POST UPDATE:
When running GlxGears, I get a bit of motion, and then the gears freeze for 1 second. And this goes on and on. But...if I move the mouse around, I get 1100FPS!
Now I messed a bit with xorg.conf and the "SWCursor" Option, but the above happens when this option is on "true". On "false" there is no 1100FPS, only the freezing loop...
I been searching for months on how to get the s-video to work on my pci VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] card. I found a site with instructions.
This is how I got it to work.
I install Debian 5.0 Lenny Desktop
added the Driver "radeon" to my /etc/X11/xorg.conf file
This work and I was able to use my tv as a monitor however when I try to play a video file from totem or vlc all I could get was audio with no video; These files work and played fine in the CRT monitor.
When I put my laptop, a Presario X1000 to sleep that uses Radeon Mobility M7 LW [Radeon Mobility 7500], when it comes back up, I get just black and white "nosie" on the screen.
Even after I do cntr+alt+F1 and then cntrl+alt+F7 it still doesn't appear to restore the regular screen.
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
I have been trying to get this web cam working for a long time. lsusb:
Code:
Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc.
dmesg
Code:
[ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice
Kernel patch: [URL]
Driver project: [URL]
Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?
[Code]...
During install of 9.10 server, both ethernet adapters were found. One is built-in to the motherboard, the second is on a PCIe slot. Selected the on-board adapter for eth0 during install, set fixed IP on the web, connected, updated, etc. w/ no problems. The second adapter is for the LAN.BUT, on first and subsequent reboots after installation complete the second adapter is not detected at all, as if it were not even plugged into the PCI or the driver not loaded. This happens on either of two slots, with two different adapters, Intel or Netgear, both pretty recent, and both of which are detected and work in a different box. 'Ethtool eth1' says device not found.This is a fairly recent motherboard 3N78EM).Since the adapter was found during installation I'm assuming that the problem is not with not the board. I've built several server systems with two or three ethernet adapters and have never run into this situation.
View 3 Replies View RelatedI have created a folder including some html link pages in /test/htlink . Now I want to create a soft link of that folder as htlink -> /test/htlink in /var/www/html . Now when I m browsing the folder , its erroring (404 Not Found) folder is not found on the server . I have given 777 permission on every file-folder in /test . No firewall & no SELINUX .
*** I want to browse the folder ***
Dual PII 400, 512Mb with a Promise SuperTrak 100 IDE Array Controller. At present I have only one drive on the controller, configured for 1 JBOD array. I install FC9 with no problem. New partition is created and formatted, Grub is installed, and then... Grub is found and booted, but then I get:
Reading all physical volumes. This may take a while... No volume groups found Volume group "VolGroup00" not found Unable to access resume device (/dev/VolGroup00/LogVol01) mount: could not find filesystem '/dev/root' I can boot in rescue mode, chroot to the installed system. I changed the kernel boot parm "root=/dev/VolGroup00/LogVol00"
I have a Dell Vostro 3300, i5 460 processor with a NVIDIA 310M Graphics Card. I'm doing a KUBUNTU 10.10 (Maverick) install with the following results. The Live CD boots just fine to, "TEST," or "Install." Installation goes fine. However, the graphics card being used is the Intel i915. I have tried installing the NVIDIA drivers directly from the, "Additional Drivers," tool and after the reboot I get through the boot screen to the console. I try to manually startx and I get the errors, "no device found," "no screens found." The second install I tried purging and blacklisting the nouveau drivers and entering safe mode. Then using apt-get install nvidia-current. After that, nvidia-xconfig. Same results.
The third attempt I re-installed and this time downloaded the drivers from the Nvidia site (version 256.53). Blacklisted nouveau, remove all nvidia, updated initramfs, etc. The install went fine however I still end up at a console after boot with the same messages as above. No device found, no screens found. I've tried searching through the forum and web and have tried things like adding the modset option along with many other hacks, tips and fixes. still, no go.I can live with the Intel graphics for now although I lose 512MB of memory. Unfortunately there is no way to disable or change this set-up in the BIOS. I've seen quite a few bug reports at Launchpad:
1. Is this something I should just wait til a fix comes? Will a fix come?
2. Is there, or will there be an official Updated Ubuntu Guide for Maverick to install NVIDIA drivers with this tecnology?
3. Lastly, is there anything else I should try??
I'm trying to install the projectM visualizer and I'm running into some problems. Initially, I tried to install it by running "sudo apt-get install libvisual-projectm", which seemed to work... except there's no launcher for it in my Applications menu and "projectM-pulseaudio" returns "command not found". From there, I decided to try to build it myself, by following this guide (<- link). It went well until the "make" command, which returns the following error:
[Code]....
I installed debian 4.0 (etch) on an old computer with some pickled graphics card in it, and then I upgraded the computer to one with slightly newer hardware only without the graphics card (the new one used on board graphics). I moved the hard drive from the old one to the new one but when I booted it up it failed to start the X-server and I got some errors listed for "device not found" and "no screens found".
I tried using "dpkg-reconfigure xserver-xorg" however I can't seem to find a working configuration. It seems pretty silly that when installing debian it can detect all this automatically with no problems but when it comes to changing some hardware around you are left in the dark with a complicated re-configuration process. Is there not some way to automate this? I'd rather not have to re-install everything
I've been trying to get my Sound set to 5.1 surround for two weeks now and for some reason Ubuntu only shows Digital Stereo.
ATI Radeon 5770
Ubuntu 64bit
When I go to System > Preferences > Sound the Output tab only gives me the option of Digital Stereo.
Code:
I have the graphic card: ATI Technologies Inc RS482 [Radeon Xpress 200M] and I want to set the driver radeon because when start the ubuntu 9.10 on live cd it's use this driver. Now load the radeonfb but when set on xorg the driver "radeon" while reboot the machine not work. When start gdm the screen becomes black and I need power off and change xorg.
View 1 Replies View RelatedI have been using Debian for a few weeks now (love it, besides it being a little bulky). and have everything going besides wireless and my graphics card, the former being less important to me. I haven't had any problems running Debian without a graphics card, but I know I will need it to play games, configure a 3d desktop if I choose, etc...
View 14 Replies View RelatedDesktop Effects could not be enabled. Also, I'm not having any luck installing Catalyst drivers. After installing Catalyst driver for the right kernel version, Xorg goes corrupt when starting up.Kernel: 2.6.30.8-64.fc11.i686.PAEVideo card: ATI Technologies Inc Mobility Radeon HD 3450$ glxinfo | grep renderdirect rendering: YesOpenGL renderer string: Software Rasterizer
View 3 Replies View RelatedLong time reader, first time poster to the forums. I have installed Fedora 12 onto a desktop here. Fresh install and fully updated as of today. In this system there is a radeon 7000 graphics card that Fedora set up dual display for me. This is working fine but unfortunately im seeing a problem with the top and bottom of one of the displays.
Please see the problem here: [URL]... The mouse will go underneath or above the areas i have pointed to. Any ideas what is wrong? In fedora 9, 10, 11 this was all working fine but i did have to use xrandr manually to get dual display working. Edit: Update:
I dd not mention that i kept my home directory. On futher inspection it seems that the issue is because of a .folder in my home directory that was backed up and restored on the fresh install. To check this i added a new user to the system and logged in with a fresh home directory. Does anyone know which folder or file this setting this is stored? I tried logging out, moving .gconf .gconfd .gnome2 .gnome2_private and the .gtk folders to another location then logged in to no avail.
It all works if I boot my self compiled vanilla 2.6.35-rc3 though. The environment
Sony vaio VGN-SR21M 4GBRAM P8400, ATI HD3400 mobility. I use
kernel-2.6.35.6-45.fc14.x86_64
xorg-x11-drv-ati.x86_64-6.13.1-0.3.20100705git37b348059.fc14
If I suspend my notebook it starts the usual slow orange blinking indicating the suspend mode got reached. There is also evidence in the various log files that this works. If I try to resume it hangs a for 3 seconds and then I get the hdd-password screen from my bios and the notebook boots from zero. I couldn't find anything in /var/log/messages nor dmesg. If I first boot to windows (grub 2nd partition) and then restart and boot to linux, all the suspend works fine
I am running openSUSE 11.0 on a Toshiba laptop with the ATI Radeon HD3650 graphic card. After installing the ATI drivers using the "1-click-install" feature found in the suse wiki, the 3D acceleration seems to be working... sort of.
[Code]...
I haven't tried to launch Compiz. However when I try the OpenGL screensavers, they run fine in the preview but when I test them, they only show in what seems a 640*480 portion of the screen in the top left corner. The rest of my 1200*800 screen is blank.
I consider setting up a new system with one of the upcoming new Radeon graphics cards. I would like to know whether this is possible or whether there is a problem I overlooked.
I thought of setting up the system with vesa mode and afterwords downloading/installing the latest radeon or fglrx driver as soon as they are available.would that work? how long does it typically take until these drivers are available?
I'm looking at buying this card and I'm wondering if anyone here has had an issue using this card with Ubuntu(currently on 9.10)
[URL]
Does anyone know of a similar easy to use interface for over-clocking with ATI cards?
I found this one that works with nvidia but haven't had much luck finding any others:
http://www.econowics.com/linux/298/t...-ubuntu-linux/
The following is my system:
AMD Athlon II x4 620 2.6Ghz
4GB DDR2-800 DC
Radeon HD 5770 1gb
Ubuntu 10.4 LTS, latest proprietary drivers.
On GLXGears, I only get 12k fps. This seems very low, especially considering the fact that my Acer Aspire One laptop gets 1-5k scores on a POS Intel GMA 950.
Just purchased and installed an ATI Radeon HD 5450 graphics card and installed the proprietary drivers via System > Administration > Hardware Drivers. After rebooting the machine X would not load so I restarted into recovery and removed my xorg.conf. At this point I could restart normally and the machine would let me into X. I went to System > Preferences > ATI Catalyst Control Center to try and configure the card.
I receive the following message:
There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following. No ATI graphics driver is installed, or the ATI Driver is not functioning properly. Please install the ATI driver appropriate for your ATI hardware, or configure using aticonfig.
So, I did just that, I restored my backup xorg.conf (configured for nvidia card) and executed 'sudo aticonfig --initial', it made the proper changes and additions to the configuration file and this is what it looks like [view xorg.conf]. I then restarted the machine and X still refuses to begin [view Xorg.0.log]. Again, I went in removed the xorg.conf file and the machine will load normally. I tried running fglrxinfo to try and see if the card was properly installed and it just threw a segmentation fault.
I have the ATI Radeon HD 5670. I recently wiped my system, doing a full install (not update) to 10.04 LTS. Everything works fine except for the mouse.
I have about 30 seconds of lag-free mouse movement, and after that, the mouse slows to a crawl. I then have to wait for about a minute and then the mouse becomes usable again. (If i continue to use the mouse, it stays unusable, until i give it a rest)
Current drivers in use are the FGLRX from the Ubuntu restricted drivers.
Does anyone know how to fix it? or what causes it? Let me know what other information you need and I will do my best to provide it.
I just added 2 more hard-drives to the system. Before this I did not have a "swap" space. I also replaced the mouse. The problem seems to have gone away.
From looking at beaucoup posts, it appears I'm SOL trying to use the Linux drivers provided by AMD (See url.terminal command line "sh ./ati-driver-installer-9.2-x86.x86_64.run". Since I keep getting an error message saying the file can't be opened either as root or using sudo I guess there's no reason to continue.Anyway, I have my PC displaying on a CRT thru a s-video connection. The screen is overscanned, that is, part of both the left and right sides are not visible. That is why I wanted to load the Radeon drivers & Catalyst Control Center so I could shrink the screen width.Question: Should I keep trying to open the ATI file? SHould I install the Open Source ATI driver? Should I give up and try to find a nVidia AGP 8X card?
View 1 Replies View RelatedI have an Aspire 5100 with ATI Radeon Xpress 1100 and have been happily running Ubuntu 8.10 until now when support has ended. I continued with 8.10 because the graphics have been fine with my system.I also have 10.10 installed and apart from the graphics, I would have no problem changing/upgrading.The problem is the glare, after a while it is very hard to work on.Is there anything I can do that's not to technical to reduce the glare.
View 5 Replies View RelatedI've been having problems getting my Ubuntu to work with ATI Radeon 6850. I've had Kubuntu for some time now, and it worked fine on my old card (nVidia 9400 GT). When I changed cards, the boot screen didn't display correctly, and after that I just got a black screen that wasn't responding to anything. I tried reinstalling the whole OS, but even the installation's GUI wouldn't load up.
Next I tired regular Ubuntu. The installation went fine, but the graphic settings were low, as you would expect from a system with no graphics driver. I installed the driver the system automatically suggests but after installing and rebooting I ran into the exact same problem I did with Kubuntu - black screen, no response. I got the notion that this card isn't fully supported yet, but I read other posts saying people got much further with this card then I did. Is there another driver I should be installing?