Software :: Editing Xorg.conf With No Monitor
Dec 7, 2009
My laptop screen isn't working but I don't want to abandon my laptop so I am trying to hook up a new monitor. I'm using my 1 HDMI port, and my BIOS doesn't recognize the monitor on boot up. Also, my xorg.conf file is not configured for this monitor. My question is what should my xorg.conf look like? I have a bit of a start on it(see attached) but it is not quite right. How do I set up the Toshiba as the default screen, in order to use this monitor when Linux starts? Other info: I use Debian 5.0 with Gnome.
View 4 Replies
ADVERTISEMENT
May 3, 2010
I'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.
View 3 Replies
View Related
Oct 17, 2009
The owners manual of my monitor gives me the following informations:
When editing my xorg.conf, do I have to add the automatically 'keyword' ? (saw nothing about it in man xorg.conf or man nv)
View 6 Replies
View Related
Sep 11, 2010
I need to find notes on how to achieve higher screen resolution via Xorg.conf and some other fixes since I just installed the NVIDIA driver... seems out of the box, my resolution is horrid, though theres an added NVIDIA Server and my dual monitors aren't configured to work. I used this tutorial to get the driver installed.
View 9 Replies
View Related
Jun 13, 2011
I'm testing a new PC and for business reasons it has to be able to run with Ubuntu 8.04 .The first problem I had was with the Intel GMA 4500 graphics driver. I have managed to resolve that and can now get resolutions > 800x600. However since then the mouse pointer is intermittently corrupt. I've attached an image showing the corrupt pointer which is about the size of a thumbnail.The driver I have installed is xserver-xorg-video-intel_2.4.0~melchiorre-5_i386.deb .I've also attached a copy of my xorg.conf file.While I've been writing this post I've noticed that if I take a screenshot or if I connect to the PC using VNC the entire screen is corrupt.
View 1 Replies
View Related
Oct 19, 2009
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
View 3 Replies
View Related
Apr 24, 2010
Is there a way to create a Seperate X Server on openSUSE 11.2 without editing the xorg.conf file? I red on this forum that should not be used any longer.
View 3 Replies
View Related
Jun 9, 2011
I bought a very beaultiful pink tv-monitor 26", model LG26LED6500 for my daughter and I also intend to enjoy it setting up in my slackware 13.37. Then I use a VGA cable and 6600GT nvidia card, but now I'm having a doubt because there aren't vertical and horizontal frequencies specs in this manual. Only:
I did a xorg.conf using a vesa driver and kde screen output was a 1024x768 - 61hz.
If I try to use a nvidia driver and xorg.conf piece above X break down. If I use any manual frequency parameters X break down too.
1)What's the difference between CRT config and tv-monitor xorg?
2)Have I use strings modeline monitor and modes screen in this situation?
View 3 Replies
View Related
Jan 5, 2010
I am using a AOC 19" LCD on a system with an on board Nvidia GeForce 4 MX and I cannot get X to start with 1280x1024, the max for the monitor.
Here is the sections for xorg.conf
It always defaults to 160x1200, which the monitor proclaims "Out of Range" and I have to in through Display Setings to set to 1280x1024. What do I need to put in xorg.conf to default to 1280x1024.
View 6 Replies
View Related
Nov 5, 2009
I had some problems because I changed my display resolution. Finally I changed the /etc/x11/xorg.conf file to:
Now the monitor is not recognised any more.
[url]
I have fedora.
View 2 Replies
View Related
Aug 4, 2009
I am using Linux 2.6.29-020629-generic #020629 SMP Tue Mar 24 12:03:21 UTC 2009 i686 GNU/Linux ubuntu.
I have a widescreen lcd laptop and the current resolution is set at 1280x768 pls see output of xrandr here for more information [url]
I want to change the resolution to 1024x768. I can do in ubuntu' display tool. The problem is that once I change it, the output does not take up the whole screen it has blank spots on the left and right side
For a better understanding please have a look at [url] and [url]
In open suse the system sets it at 1024x768 without any blanks on the left and right corner. You can have a look at it here [url].
My current xorg.conf is details is at [url].
Please also find my xorg.0.log at [url]
The lcd does not have any controls to tweak.
View 3 Replies
View Related
Mar 9, 2010
Since the display of my notebook doesn't work very well anymore, straight vertical blue line on the right side of the screen, I want to connect an external monitor. (ADI [it doesn't say the exact model] 21 inch; resolution 1600x1200 and 85 Hz refresh rate).
I'm using Ubuntu 9.10 with kernel 2.6.31.17 and xrandr does not recognize the monitor correctly (see code of xrandr output). Adding a new mode did not work and currently it displays a resolution of 1200x768 which is horrible. In this version of Ubuntu the xorg.conf is not used anymore and is thus empty. As I have read you could create an entry in a new xorg.conf for your hardware which would be used by Ubuntu, having priority over xrandr settings.
But I do not really know what the monitor section in xorg.conf would have to look like, as the original screen would have to be set to 1200x768 or be disabled all together. The screens would have to be mirrored. Would the setting also work, when the external monitor is not connected to the notebook, so the original screen would display everything correctly.
Here some information about the system which will hopefully be useful for you. Please post helpful links I have overlooked or ask for more information.
My onboard graphics intel chip is capable of a resolution of 1600x1200 as it works in Windows:
lscpi output for graphics chip:
Code:
loaded kernel modules (relevant lines, at least I hope) according to lsmod (the driver from Intel web page is totally outdated and I think this is not the problem, so I didn't consider compiling a new driver)
View 1 Replies
View Related
Mar 20, 2010
I'm trying to play around with the orientation of my monitors (portrait vs landscape), and it's now obvious to me that they are best viewed from a high angle when placed on their stands normally. As I change their orientation, it would be nice if I could manipulate what angle they are best viewed at. I doubt this is adjustable, but I thought I would come on here an ask since there are a myriad of configurations that I don't understand.
View 14 Replies
View Related
Jul 1, 2009
I have a dual monitor setup (Twinview), both monitors are connected to my 1xNvidia MSI NX8600GT card...I've been using a 21.6inch HannsG HG216D (herein referred to as HG216D) monitor as my LEFT monitor, and a Dell 1905fp (herein referred to as 1905fp) as my RIGHT monitor.
I recently got rid of the 19inch 1905fp Dell monitor and moved my HG216D to the RIGHT and now I have a new 23inch DELL S2309W (herein referred to as S2309W) on the left. The new S2309W is connected to my computer via DVI cable and is configured Perfectly at it's native 1920x1080 resolution.
However I can't for the life of me get my HG216D back to it's native 1680x1050. The HG216D is connected via VGA cable that is also routed thru a KVM, I realize this means that this monitor can't/won't be auto-configured. However I should be allowed to set it manually right?...
Code:
Won't let me select 1680x1050 for the HG216D resolution, it will only let me select 1440x900 MAX, there is no option for 1680x1050, (See attached: screenshot)
I've tried to manually edit my /etc/X11/xorg.conf, but after hours on end messing with it, I give UP...
Here is my current xorg.conf:
Code:
I am just not sure what I need to change and how to get the second xorg.conf to play nice via a VGA connection?
View 1 Replies
View Related
Dec 11, 2010
I've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed
[Code]....
View 8 Replies
View Related
May 23, 2010
Just a day ago I did a clean install of 10.04, after wiping the disk clean of 9.10. So far everything's working great. Except for my old dual-screen configuration. A year or two ago I badly wanted to have 2 monitors, where both would share the same desktop/workspace allowing me to drag windows back and forth between the two. After a lot of research, I finally was able to put together (although a probably quite sloppy) xorg.conf file that did the trick for me.
My case is somewhat unique in that my left monitor is horizontal, while my right monitor is rotated 90 degrees, and is vertical. In 10.04, my old xorg.conf file sort of works, but I have problems on my right, vertical screen:
- when I move my cursor onto the vertical screen, when I try to move it above where my left, horizontal screen's boundaries end, my cursor jumps down to the bottom of my vertical screen. I can't access anything with my cursor above this boundary on my vertical screen. Note that my vertical screen's bottom is in aligned with my horizontal screen's bottom, and that the vertical screen sticks up above the horizontal screen, as both have a 1680 x 1050 resolution/widescreen aspect ratio.
- however, it appears that only my cursor is having issues accessing the upper part of my vertical screen. When I maximize windows in this screen, they properly fill it up entirely like they should. (but I still can't access the top parts of these applications with my cursor).
So obviously there must be some boundary managing where my cursor is allowed to go, and another set of rules defining the boundaries that the windows themselves can be shown/take up. Also note that because of my right monitor being rotated vertically, I'm forced to use Xinerama. Can someone help me go through my xorg.conf file, below, to help me get this "simple" cursor issue fixed? I'm sure it's just one minor thing that has to be changed, but I'm not sure what:
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008
# xorg.conf (X.Org X Window System server configuration file)
[Code]...
View 1 Replies
View Related
Apr 9, 2010
I have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.
But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.
What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.
I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #
View 11 Replies
View Related
Feb 16, 2011
1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
View 3 Replies
View Related
Nov 14, 2009
Booted puppy 4.12 off usb many many times have i booted puppy and other distros this has never happened I get to part where you choose xorg or xvesa I chose xvesa, as usual my monitor makes a "click" noise as if its been turned off but it doesn't turn off default puppy xvesa is 800x600 so i changed it to 1024x768 as usual after messing around I reboot into my ubuntu-9.04 install and my desktop is 800x600! I reboot into my SalixOS install and my desktop is 800x600! every system I boot into is this way! even live cd's! the PC is a Emachines with everything Nvidia mx4000 geforce and old 15inch vga monitor how do I output graphics card and monitor info?
Here is the xorg.conf every distro changed too
Code:
If I install the nvidia drivers in ubuntu/debian, only then can I get 1024x768 resolution
View 1 Replies
View Related
Jun 19, 2011
my laptop screen has 1900x1280 (native resolution) and my second monitor has 1600x1080
After browsing the forums and messing around with drivers I managed to get the resolution up to 1600x1080 (from 1000x800 at install) on the laptop screen. No luck at all with the second monitor. I currently have it connected with both VGA and DVI.
my understanding is I need to use twin view to setup the second monitor. I've read several of the earlier posts but haven't been able to get it to work. Here is my current xorg.conf file:
Code:
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Configured Monitor"
VendorName "Unknown"
[Code].....
View 9 Replies
View Related
Sep 22, 2010
I recently tried to plug in a second monitor to my graphics card in an attempt to mess around with a dual monitor set up. This created a duplicate effect (which I expected at first) but downgraded my original monitor to the second monitors max resolution. Now my xorg.conf appears to be blank and I dont believe my fglrx drivers are working anymore.
When I try to start compiz from bash I get the following:
Code:
When I attempt fglrxinfo:
Code:
I'm running Kubuntu, Karmic
AMD64
ATI Radion x1350
What could have happened? All I did was plug in a second monitor and restart!
View 1 Replies
View Related
Sep 24, 2010
I have Ubuntu (running Jolicloud) on my HP dv2000 laptop, connected to my Sony AV Receiver through HDMI to use the TV as an external monitor. However, the resolution seems to be slightly off as the outer edges of the screen are cut off. Is there a way to fix this by editing the xorg.conf file? My current setup is below. I tried adding the line "Virtual 1244 700" to the subsection "display", but when I restarted it threw me into low graphics mode. Is there anything else I can try?
I also tried setting up the resolution at 1920x1080 on the TV and kept the default resolution on the monitor as 1280x800, and as you would expect displays the entire desktop in a smaller version on part of the tv. However, the desktop is still offset, leaving the top and left margins cut off. So, perhaps I need a way to offset the screen? Is this possible in xorg.conf?
View 8 Replies
View Related
Feb 12, 2010
I am looking for a generic vesa driver xorg.conf file that will work with most any 1024x768 monitor.
This is for a network appliance and our field people have many different type of monitors.
This product will mostly be used "headless" but sometimes our field people will plug in a monitor.
The intel driver will not even start x without a monitor plugged in so I found it necessary to go to the vesa driver.
Code:
View 1 Replies
View Related
Jan 26, 2011
I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:
in xorg.conf:
Code:
Section "Device"
Identifier "Device0"
Driver "nvidia"
[code]....
My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?
View 5 Replies
View Related
May 22, 2011
I have used nVidia my entire linux life (about 5 years clean and sober from M$). Recently, I have switched over to an ATI Radeon HD 5550 card. After many trial and error setups, I finally got the resolutions and screens set properly with a xrandr command, which I have now added to a shell script in ~/.kde4/Autostart. It has worked for me for a while now, but I really would like to get it set in the xorg.conf.d files so that I don't have to wait that extra few seconds after login for the screens to fix themselves.
Is there an easy way to take what xrandr does and export it to the xorg.conf.d files? If my video card recognizes my default monitor as DFP2 and the tv that I only sometimes use with this computer as DFP1, how can I ensure that the login screen for openSUSE/KDE4 appears on my default screen (an issue that drove me nuts a few months ago when I tried Ubuntu to see what all the fuss was about)?
My xrandr command that I use to fix it all is:
xrandr --output DFP2 --auto --pos 0x0 --primary --output DFP1 --auto --right-of
I am using the proprietary Radeon driver from the ioda repository. DFP2 is a monitor which has a optimum resolution of 1920x1200, and DFP1 is an 1080p HDTV. I can not reverse the output plugs for the screens even though my monitor is an HDMI monitor because I use the actual HDMI port on the video card to output audio to the television and the other plug is a DVI that I convert to HDMI for the monitor.
View 1 Replies
View Related
Apr 3, 2010
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 1 Replies
View Related
Oct 12, 2010
I have to edit the grub.conf as there was a issue in running in virtual box, so i went to edit the /boot/grub/grub.conf file ( centos )and run
[Code]...
View 4 Replies
View Related
Mar 16, 2011
I need to edit a line in a file in gedit, but its read only. I need to change
; default-sample-rate = 44100
to
default-sample-rate=44800.
Would anyone know if there is an option to make a read only file editable? Judging by the responses to the thread I followed to enable my soundcard, it is possible, and perhaps there is some setting etc that needs changing
View 3 Replies
View Related
Apr 8, 2010
I don't want ubuntu to clean /var/cache/apt/archives directory automatically... is it possible to make it permanent by editing any conf file?
View 5 Replies
View Related
Jun 8, 2010
I have just installed 10.04 LTS on my Inspiron 1100 and I really want to get this video driver debacle taken care of! It seems that one cannot simply edit xorg.conf on 10.04 LTS as it's owned by root and I'm not sure how to acquire root access... I've read a couple of threads similar to this one here: [URL]. I can't save changes to the xorg.conf file...
View 2 Replies
View Related
