I am using Linux 2.6.29-020629-generic #020629 SMP Tue Mar 24 12:03:21 UTC 2009 i686 GNU/Linux ubuntu.
I have a widescreen lcd laptop and the current resolution is set at 1280x768 pls see output of xrandr here for more information [url]
I want to change the resolution to 1024x768. I can do in ubuntu' display tool. The problem is that once I change it, the output does not take up the whole screen it has blank spots on the left and right side
For a better understanding please have a look at [url] and [url]
In open suse the system sets it at 1024x768 without any blanks on the left and right corner. You can have a look at it here [url].
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
I bought a very beaultiful pink tv-monitor 26", model LG26LED6500 for my daughter and I also intend to enjoy it setting up in my slackware 13.37. Then I use a VGA cable and 6600GT nvidia card, but now I'm having a doubt because there aren't vertical and horizontal frequencies specs in this manual. Only:
I did a xorg.conf using a vesa driver and kde screen output was a 1024x768 - 61hz.
If I try to use a nvidia driver and xorg.conf piece above X break down. If I use any manual frequency parameters X break down too.
1)What's the difference between CRT config and tv-monitor xorg?
2)Have I use strings modeline monitor and modes screen in this situation?
My laptop screen isn't working but I don't want to abandon my laptop so I am trying to hook up a new monitor. I'm using my 1 HDMI port, and my BIOS doesn't recognize the monitor on boot up. Also, my xorg.conf file is not configured for this monitor. My question is what should my xorg.conf look like? I have a bit of a start on it(see attached) but it is not quite right. How do I set up the Toshiba as the default screen, in order to use this monitor when Linux starts? Other info: I use Debian 5.0 with Gnome.
Since the display of my notebook doesn't work very well anymore, straight vertical blue line on the right side of the screen, I want to connect an external monitor. (ADI [it doesn't say the exact model] 21 inch; resolution 1600x1200 and 85 Hz refresh rate).
I'm using Ubuntu 9.10 with kernel 220.127.116.11 and xrandr does not recognize the monitor correctly (see code of xrandr output). Adding a new mode did not work and currently it displays a resolution of 1200x768 which is horrible. In this version of Ubuntu the xorg.conf is not used anymore and is thus empty. As I have read you could create an entry in a new xorg.conf for your hardware which would be used by Ubuntu, having priority over xrandr settings.
But I do not really know what the monitor section in xorg.conf would have to look like, as the original screen would have to be set to 1200x768 or be disabled all together. The screens would have to be mirrored. Would the setting also work, when the external monitor is not connected to the notebook, so the original screen would display everything correctly.
Here some information about the system which will hopefully be useful for you. Please post helpful links I have overlooked or ask for more information.
My onboard graphics intel chip is capable of a resolution of 1600x1200 as it works in Windows:
lscpi output for graphics chip:
loaded kernel modules (relevant lines, at least I hope) according to lsmod (the driver from Intel web page is totally outdated and I think this is not the problem, so I didn't consider compiling a new driver)
I'm trying to play around with the orientation of my monitors (portrait vs landscape), and it's now obvious to me that they are best viewed from a high angle when placed on their stands normally. As I change their orientation, it would be nice if I could manipulate what angle they are best viewed at. I doubt this is adjustable, but I thought I would come on here an ask since there are a myriad of configurations that I don't understand.
I have a dual monitor setup (Twinview), both monitors are connected to my 1xNvidia MSI NX8600GT card...I've been using a 21.6inch HannsG HG216D (herein referred to as HG216D) monitor as my LEFT monitor, and a Dell 1905fp (herein referred to as 1905fp) as my RIGHT monitor.
I recently got rid of the 19inch 1905fp Dell monitor and moved my HG216D to the RIGHT and now I have a new 23inch DELL S2309W (herein referred to as S2309W) on the left. The new S2309W is connected to my computer via DVI cable and is configured Perfectly at it's native 1920x1080 resolution.
However I can't for the life of me get my HG216D back to it's native 1680x1050. The HG216D is connected via VGA cable that is also routed thru a KVM, I realize this means that this monitor can't/won't be auto-configured. However I should be allowed to set it manually right?...
Won't let me select 1680x1050 for the HG216D resolution, it will only let me select 1440x900 MAX, there is no option for 1680x1050, (See attached: screenshot)
I've tried to manually edit my /etc/X11/xorg.conf, but after hours on end messing with it, I give UP...
Here is my current xorg.conf:
I am just not sure what I need to change and how to get the second xorg.conf to play nice via a VGA connection?
I've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed
Just a day ago I did a clean install of 10.04, after wiping the disk clean of 9.10. So far everything's working great. Except for my old dual-screen configuration. A year or two ago I badly wanted to have 2 monitors, where both would share the same desktop/workspace allowing me to drag windows back and forth between the two. After a lot of research, I finally was able to put together (although a probably quite sloppy) xorg.conf file that did the trick for me.
My case is somewhat unique in that my left monitor is horizontal, while my right monitor is rotated 90 degrees, and is vertical. In 10.04, my old xorg.conf file sort of works, but I have problems on my right, vertical screen:
- when I move my cursor onto the vertical screen, when I try to move it above where my left, horizontal screen's boundaries end, my cursor jumps down to the bottom of my vertical screen. I can't access anything with my cursor above this boundary on my vertical screen. Note that my vertical screen's bottom is in aligned with my horizontal screen's bottom, and that the vertical screen sticks up above the horizontal screen, as both have a 1680 x 1050 resolution/widescreen aspect ratio.
- however, it appears that only my cursor is having issues accessing the upper part of my vertical screen. When I maximize windows in this screen, they properly fill it up entirely like they should. (but I still can't access the top parts of these applications with my cursor).
So obviously there must be some boundary managing where my cursor is allowed to go, and another set of rules defining the boundaries that the windows themselves can be shown/take up. Also note that because of my right monitor being rotated vertically, I'm forced to use Xinerama. Can someone help me go through my xorg.conf file, below, to help me get this "simple" cursor issue fixed? I'm sure it's just one minor thing that has to be changed, but I'm not sure what:
Code: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008 # xorg.conf (X.Org X Window System server configuration file)
I have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.
But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.
What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.
I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #
1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
Booted puppy 4.12 off usb many many times have i booted puppy and other distros this has never happened I get to part where you choose xorg or xvesa I chose xvesa, as usual my monitor makes a "click" noise as if its been turned off but it doesn't turn off default puppy xvesa is 800x600 so i changed it to 1024x768 as usual after messing around I reboot into my ubuntu-9.04 install and my desktop is 800x600! I reboot into my SalixOS install and my desktop is 800x600! every system I boot into is this way! even live cd's! the PC is a Emachines with everything Nvidia mx4000 geforce and old 15inch vga monitor how do I output graphics card and monitor info?
Here is the xorg.conf every distro changed too
If I install the nvidia drivers in ubuntu/debian, only then can I get 1024x768 resolution
my laptop screen has 1900x1280 (native resolution) and my second monitor has 1600x1080
After browsing the forums and messing around with drivers I managed to get the resolution up to 1600x1080 (from 1000x800 at install) on the laptop screen. No luck at all with the second monitor. I currently have it connected with both VGA and DVI.
my understanding is I need to use twin view to setup the second monitor. I've read several of the earlier posts but haven't been able to get it to work. Here is my current xorg.conf file:
I recently tried to plug in a second monitor to my graphics card in an attempt to mess around with a dual monitor set up. This created a duplicate effect (which I expected at first) but downgraded my original monitor to the second monitors max resolution. Now my xorg.conf appears to be blank and I dont believe my fglrx drivers are working anymore.
When I try to start compiz from bash I get the following:
When I attempt fglrxinfo:
I'm running Kubuntu, Karmic AMD64 ATI Radion x1350
What could have happened? All I did was plug in a second monitor and restart!
I have Ubuntu (running Jolicloud) on my HP dv2000 laptop, connected to my Sony AV Receiver through HDMI to use the TV as an external monitor. However, the resolution seems to be slightly off as the outer edges of the screen are cut off. Is there a way to fix this by editing the xorg.conf file? My current setup is below. I tried adding the line "Virtual 1244 700" to the subsection "display", but when I restarted it threw me into low graphics mode. Is there anything else I can try?
I also tried setting up the resolution at 1920x1080 on the TV and kept the default resolution on the monitor as 1280x800, and as you would expect displays the entire desktop in a smaller version on part of the tv. However, the desktop is still offset, leaving the top and left margins cut off. So, perhaps I need a way to offset the screen? Is this possible in xorg.conf?
I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:
My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?
I'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.
I was trying to disable touchpad click, added a section to /etc/X11/xorg.config, and now the OS never starts up, the laptop just runs... This is my second day with the machine, I've done a ton of setup but haven't yet setup a backup utility... is there any way for me to just go in and change the file back to the way it was?
I have used nVidia my entire linux life (about 5 years clean and sober from M$). Recently, I have switched over to an ATI Radeon HD 5550 card. After many trial and error setups, I finally got the resolutions and screens set properly with a xrandr command, which I have now added to a shell script in ~/.kde4/Autostart. It has worked for me for a while now, but I really would like to get it set in the xorg.conf.d files so that I don't have to wait that extra few seconds after login for the screens to fix themselves.
Is there an easy way to take what xrandr does and export it to the xorg.conf.d files? If my video card recognizes my default monitor as DFP2 and the tv that I only sometimes use with this computer as DFP1, how can I ensure that the login screen for openSUSE/KDE4 appears on my default screen (an issue that drove me nuts a few months ago when I tried Ubuntu to see what all the fuss was about)?
I am using the proprietary Radeon driver from the ioda repository. DFP2 is a monitor which has a optimum resolution of 1920x1200, and DFP1 is an 1080p HDTV. I can not reverse the output plugs for the screens even though my monitor is an HDMI monitor because I use the actual HDMI port on the video card to output audio to the television and the other plug is a DVI that I convert to HDMI for the monitor.
Is it possible to add more than one graphic device driver to xorg.conf and it will load automatically? It is important to autodetect because I am using the configuraiton read only. This is because it's a custom LIVE CD.This is what I currently have, and it works!
Problem is if I put my Live CD in my brothers machine, it fails to load because it uses a Radeon driver!I can preinstall the ati packages I need, so all i need to know is how do I make it work?
I am trying to install debian as a DC but on reboot I get the "Input not supported " error. I switched to virtual input and login to try to edit the xorg.conf file but created a new file instead because the xorg.conf file is open by the installation. How do I close it so I can edit it and continue. I am afraid to start a new file as I am not sure what is in the ools one.
Been trying to setup my xorg.conf file to have a 1920x1200 screen.Strange behavior: when my X starts up, I see my mouse cursor, can move it around. It's small enough to suggest the 1920x1200 resolution took, is working.However, the rest of the screen remains black. No login prompt.I've looked at /var/log/xorg.conf, no errors.Is there something else I can look at?
Can anyone help with me configure my dual-screen monitors for rotation? I have xrandr 1.1. Have tried various approaches, nothing takes. I can't even get the xrandr options to show up in KDE's Display control panel.
My lspci output: 03:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] My current xorg.conf (works, minus screen rotation): # Xorg configuration created by system-config-display
I have set up my Ubuntu virtual machine and am trying to adjust the screen resolution because it's stuck at 800x600 presently and there are no higher resolution options. I've looked at numerous similar forms and tutorials online and they all seem to involve editing /etc/X11/xorg.conf. However, for whatever reason, this file seems not to exist on my machine. I found another tutorial on how to add a screen resolution using xrandr --addmode which added the resolution I want to the list that appears when I type the command xrandr, but when I try to apply it I get an error about CRTC 262 failing.