I need to find notes on how to achieve higher screen resolution via Xorg.conf and some other fixes since I just installed the NVIDIA driver... seems out of the box, my resolution is horrid, though theres an added NVIDIA Server and my dual monitors aren't configured to work. I used this tutorial to get the driver installed.
View 9 RepliesI'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.
View 3 Replies View RelatedMy laptop screen isn't working but I don't want to abandon my laptop so I am trying to hook up a new monitor. I'm using my 1 HDMI port, and my BIOS doesn't recognize the monitor on boot up. Also, my xorg.conf file is not configured for this monitor. My question is what should my xorg.conf look like? I have a bit of a start on it(see attached) but it is not quite right. How do I set up the Toshiba as the default screen, in order to use this monitor when Linux starts? Other info: I use Debian 5.0 with Gnome.
View 4 Replies View RelatedI'm testing a new PC and for business reasons it has to be able to run with Ubuntu 8.04 .The first problem I had was with the Intel GMA 4500 graphics driver. I have managed to resolve that and can now get resolutions > 800x600. However since then the mouse pointer is intermittently corrupt. I've attached an image showing the corrupt pointer which is about the size of a thumbnail.The driver I have installed is xserver-xorg-video-intel_2.4.0~melchiorre-5_i386.deb .I've also attached a copy of my xorg.conf file.While I've been writing this post I've noticed that if I take a screenshot or if I connect to the PC using VNC the entire screen is corrupt.
View 1 Replies View RelatedThe owners manual of my monitor gives me the following informations:
When editing my xorg.conf, do I have to add the automatically 'keyword' ? (saw nothing about it in man xorg.conf or man nv)
Is there a way to create a Seperate X Server on openSUSE 11.2 without editing the xorg.conf file? I red on this forum that should not be used any longer.
View 3 Replies View RelatedWhile trying to implement some of the suggestions in the fedora 12 common problems (Intel Graphics)I discovered I cannot get the resolution correct using a xorg.conf file . Here is the file# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
[code]....
get my VIA chrome 9 video card running with my Beamerproperly installed the openchrome driver and edited the /etx/X11/xorg.conf but the resolution settings are ignored. Something seems to be wrong with my hsync settings:
Code:
$ cat /var/log/Xorg.0.log | grep -i "CHROME"
(--) PCI:*(0:1:0:0) 1106:3371:1458:d000 VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9
[code]....
i have a Fedroa12 installed as a VM, and my problem is that i can't change the resolution higher than 800x600 .
i am trying to do that with an Xorg.conf file. here is what i did:
1. telinit 3
2. Xorg -configure (root user)
3. cp /root/xorg.conf.new /etc/X11/xorg.conf
4. inside xorg.conf i have added the following:
under the "screen" section i have added:
DefaultDepth 24 then under the "SubSection" of Depth 24, i have added:
Modes "1680x1050" "1028X768" "800x600"
but then whenever i am try to start the X, it fails with the following message: no screen found...
since i am doing it for studying only, how to configure properly the xorg.conf file ?
FC12-x86_64/KDE How can I lock in the 1024x768 resolution in xorg.conf ?
The Option PreferredMode is Ignored , checking in Xorg-0-log.
If I put in Modes "1024x768" it gets changed everytime I reboot.
I'm using the Nvidia driver. Can't use the nouveau driver, the mouse disappears when waking the computer up after about a half hour of sleep, then I have to restart computer to get mouse to reappear.
I'm trying to get my screen resolution set in Mythbuntu 9.10, but there is no xorg.conf on my system! I'm trying to figure out what to do (the xfce tool on mythbuntu doesn't offer the correct resolution, and I'm not even sure what driver I'm using). I've seen other threads saying to run nvidia-setup or somesuch. I assume the appropriate tool in my case would be aticonfig (I saw that elsewhere too) as I'm using an ATI Radeon 9600XT, but that tool says:
Code:
aticonfig: No supported adapters detected
I am trying to run using WINE. It has a platinum rating on the site, and runs perfectly on my laptop.on my desktop it doesn't seem to run at all.The screen goes black,then brings me back to the desktop. I manually ran the WINE command in the terminal, and it produced the error "err11settings:X11DRV_ChangeDisplaySettingsE x No matching mode found 320x200x8 @0! (XRandR)". The laptop and desktop are both running the same version of WINE (1.3.3) and have similar Nvidia cards (laptop has a mobile 9600, desktop has a 9800). I found a bug report on this exact issue on the WINE website (I'll paste a link), and they mention that the solution is simply to add the 320x200x8 resolution mode to Xorg.conf.
I've tried generating the line that I may need with a web-based modeline calculator, referenced on another thread, but it caused my system to fail booting. Luckily, I backed up xorg.conf before making changes and restored the old one via recovery mode. Here's the link to the calculator, I may just be using it wrong: [URL]
Since the display of my notebook doesn't work very well anymore, straight vertical blue line on the right side of the screen, I want to connect an external monitor. (ADI [it doesn't say the exact model] 21 inch; resolution 1600x1200 and 85 Hz refresh rate).
I'm using Ubuntu 9.10 with kernel 2.6.31.17 and xrandr does not recognize the monitor correctly (see code of xrandr output). Adding a new mode did not work and currently it displays a resolution of 1200x768 which is horrible. In this version of Ubuntu the xorg.conf is not used anymore and is thus empty. As I have read you could create an entry in a new xorg.conf for your hardware which would be used by Ubuntu, having priority over xrandr settings.
But I do not really know what the monitor section in xorg.conf would have to look like, as the original screen would have to be set to 1200x768 or be disabled all together. The screens would have to be mirrored. Would the setting also work, when the external monitor is not connected to the notebook, so the original screen would display everything correctly.
Here some information about the system which will hopefully be useful for you. Please post helpful links I have overlooked or ask for more information.
My onboard graphics intel chip is capable of a resolution of 1600x1200 as it works in Windows:
lscpi output for graphics chip:
Code:
loaded kernel modules (relevant lines, at least I hope) according to lsmod (the driver from Intel web page is totally outdated and I think this is not the problem, so I didn't consider compiling a new driver)
I run fedora on a server only from command line. I need to change the resolution.
I tried to create a basic xorg.con file with Xorg -configure. But Xorg command does not exist. Which rpm do I need to install?
I've created the file from new in /usr/share/X11 and then added to lines from GTF. I@ve restarted Xorg by killing the PID then restarting and I don't get this resolution unfortunately
[Code]...
monitor is a Optiquest Q19wb. I normally have is set on 1280x1024, but fedora will only go to 800x600. It has detected the monitor correctly. Not sure if being connected to KVM will cause issues. The xorg.conf does not exist. Have installed system-config-display but have not run yet.
View 1 Replies View RelatedI installed debian 5 in a pc with a Intel 4 series VGA. The optimal resolution for the monitor is 1360x76, but the system does not allow that. I tried to change my xorg.conf, but got no success.In my xorg.conf I used this:
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
[code]....
I have set up my Ubuntu virtual machine and am trying to adjust the screen resolution because it's stuck at 800x600 presently and there are no higher resolution options. I've looked at numerous similar forms and tutorials online and they all seem to involve editing /etc/X11/xorg.conf. However, for whatever reason, this file seems not to exist on my machine. I found another tutorial on how to add a screen resolution using xrandr --addmode which added the resolution I want to the list that appears when I type the command xrandr, but when I try to apply it I get an error about CRTC 262 failing.
View 8 Replies View RelatedI've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed
[Code]....
my laptop screen has 1900x1280 (native resolution) and my second monitor has 1600x1080
After browsing the forums and messing around with drivers I managed to get the resolution up to 1600x1080 (from 1000x800 at install) on the laptop screen. No luck at all with the second monitor. I currently have it connected with both VGA and DVI.
my understanding is I need to use twin view to setup the second monitor. I've read several of the earlier posts but haven't been able to get it to work. Here is my current xorg.conf file:
Code:
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Configured Monitor"
VendorName "Unknown"
[Code].....
I have Ubuntu (running Jolicloud) on my HP dv2000 laptop, connected to my Sony AV Receiver through HDMI to use the TV as an external monitor. However, the resolution seems to be slightly off as the outer edges of the screen are cut off. Is there a way to fix this by editing the xorg.conf file? My current setup is below. I tried adding the line "Virtual 1244 700" to the subsection "display", but when I restarted it threw me into low graphics mode. Is there anything else I can try?
I also tried setting up the resolution at 1920x1080 on the TV and kept the default resolution on the monitor as 1280x800, and as you would expect displays the entire desktop in a smaller version on part of the tv. However, the desktop is still offset, leaving the top and left margins cut off. So, perhaps I need a way to offset the screen? Is this possible in xorg.conf?
I am running kde 4.4 in virtualbox , but cannot create xorg.conf to get a correct resolution. X -configure = segfault. Older releases were fine - lenny, even ubuntu hardy / lucid.
View 6 Replies View RelatedI have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.
But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.
What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.
I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #
1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:
in xorg.conf:
Code:
Section "Device"
Identifier "Device0"
Driver "nvidia"
[code]....
My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?
I looked for a solution to this,and found a thread for it ,but I dont know how to do what it says.Here is part of it by the user "cameronol": There is a bug in Ubuntu 9.10 Karmic with the default /etc/X11/xorg.conf involving Nvidia. receive the error"Failed to parse existing X config file '/etc/X11/xorg.conf'.Then he posts:
[Code]...
Then he says to delete the first section with the default screen,and it will be fixed.But HOW do I look for the /etc/X11/xorg.conf file to edit it,and how do I edit it?I am new to ubuntu,but I have learned to use a terminal(I think)It seems to be just like the "run" box on Windows.I did a search for the file,but came up empty.I want to fix this cause every time I restart,I have a low resolution that is impossible to work in.
I just Install Ubuntu for the first time and am having problems setting my hdtv's native resolution of 1280x768. I have tried editing the xorg.conf file with no success. Video card is an Nvidia 8600GT. Also I have a dual boot with Fedora 12 and it runs at 1280X768 with the same xorg.conf file edits i have been tring in Ubuntu. Here is my current xorg.conf file:
Code:
Section "Monitor"
Identifier "Default Screen"
[code]....
so, I've been all over this website and the web trying to solve this issue. I upgraded to lucid and switched monitors. my new monitor is an acer x183h. i'm trying to set it up in xrandr before i mess with any permanent files. i've done the following
pyramid@Pyramid:~$ cvt 1366 768
# 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz
Modeline "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync
pyramid@Pyramid:~$ xrandr --newmode "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync
pyramid@Pyramid:~$ xrandr
[Code]...
this is a custom built computer with an asus server motherboard. i'm using the computer as a server with a GUI. everything about it is awesome except for this resolution busines.
I cannot get my desired resolution and refresh rate in Ubuntu (10.04, Lucid). I want to run at the best my poor monitor can, which in Windows (XP through 7) is 1152*864 with a refresh rate of 72Hz.
I want these setting in Ubuntu, and many grey hairs have been produced in trying to make it happen. I can get the correct resolution, but not the refresh rate.
I'm using the proprietary Nvidia drivers, which are up to date.
System info:
I have a CRT Monitor connected to a laptop via the VGA connector. The monitor is a 16" AOC brand (this is all I know, and for all my efforts I cannot find the manual for it from just this information). The graphics card is a GeForce 9600M GS
Things I've tried:
Using the regular default drivers Editing Xorg.conf in all manner of ways (seems to always be ignored upon reboot. I don't get that). 3 days of googling Asking at the Ubuntu forums.
How can I do this, if I can?
how all of this works, how xorg.conf and the Nvidia program interact and such.
I've been trying for very long now to adjust my screen resolution to my desired setting. So far, no luck. Just today I went in to examine what my xorg.conf looked like and this is what I saw.
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
[Code].....