Software :: CentOS 5.5 - Apache And Bugzilla 403 Error
Apr 1, 2011
I loaded CentOS 5.5, Apache and Bugzilla with all the trimmings. My checksetup.pl finishes with no errors. I think the issue is on the Apache side of the equation. I can surf to localhost/test/index.html but cannot surf to localhost/bugzilla/index.html. I have commented out my <Directory> calls for /var/www/html/bugzilla. Restarted everything, cleared browser cash, validated that the test directory, bugzilla directory and both index.html files have the same settings. I can file:// to both index.html files but can't http:// to the bugzilla version. I get a 403 error. What can cause Apache to ignore a directory in this case?
View 4 Replies
ADVERTISEMENT
Jan 20, 2011
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
View 3 Replies
View Related
Feb 23, 2011
installing Bugzilla on CentOS 5.5 step by step? I want to learn how to install on my own pc, cause I will have to install it later on this semester for my professor.
View 2 Replies
View Related
Aug 13, 2010
When I iried to install bugzilla on my Ubuntu Lucid, I kept getting the following message. I have used "sudo apt-get --configure -a " and this is as far as I can get with the installation. Is there a way of first stopping the process and then removing Bugzilla, as it has locked the admin for apt.
Setting up bugzilla3 (3.2.5.1-2) ...
dbconfig-common: writing config to /etc/dbconfig-common/bugzilla3.conf
granting access to database bugzilla3 for bugzilla3@localhost: already exists.
creating database bugzilla3: already exists.
dbconfig-common: flushing administrative password
[Code].....
View 2 Replies
View Related
Apr 5, 2011
The thing is we have 2 servers one is bugzilla + proxy other is mailserver (internal)
The thing is when my dev team files any bug the bugzilla can't send mail to a user user@test.local.com
P.S:i am actually having problems since the sudden power cut and server restarts
the local mail server is having zimbra package installed
View 2 Replies
View Related
Jun 22, 2011
I am unable to run perl script.When i am trying to run it.It shows following error in Apache error log- [Wed Jun 22 14:05:11 2011] [error] [client 172.16.237.128] Premature end of script headers: webrebase101.cgi
Below is the script which i am trying to run:
#!/usr/bin/perl
use Restrictionmap;
use Rebase;
use SeqFileIO;
[Code]...
View 1 Replies
View Related
Apr 22, 2009
I don't mind that apache logs "rotate". By that, I mean that periodically the most recent log is renamed "*.1" and the older logs are bumped up a number In my particular situation, I do mind that the log that was "*.4" is deleted rather than being renamed to "*.5" when that periodic renaming happens.
I know most of the other /var/log files have the same behavior. What does this? Can I change it so my apache logs are "rotated" up but aren't deleted? I know this will take some hard drive space, but I have a lot of it.
EDIT: CentOS 5.3, kernel 2.6.18-128.1.6.el5, Apache 2.2.3
View 1 Replies
View Related
May 16, 2009
I am using following software on my web server:
RedHat 2.6.18-92.1.10.el5
Apache/2.2.3
Coldfusion 8
My webserver accesses a backend mySQL server using CentOS5
The last week, I have been getting a "page Load Error" on my web server whilst others told me they are getting a "broken link" error when they try to access my web site. It has been working fine for the last 12 months until last week.
ADSL, modem and router okay according to service provider (verizon)
I can ping my IP address and my domain name.
# netstat -tap
shows http and https both processes running.
# service httpd restart
no issues
I shut down firewall and tried again, but got the same "page load error".
View 3 Replies
View Related
Dec 18, 2010
Weird error I have here with apache, the stock version that comes with CentOS 5.5 (httpd-2.2.3-43.el5.centos). A user wants to be able to download files within his homedir through the web. Most files work just fine. However, he recently discovered that files ending in .vcf produce the following error when trying to click on them via the IndexListing on the web page:
[Code
View 1 Replies
View Related
Oct 14, 2010
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
View 7 Replies
View Related
Jul 2, 2010
i opened up my browser to surf the web and a page popped up i had never seen before.Apache 2 Test page powered by centos. Any address i put into my firefox browser won't come up and i'm stuck on this test page and,i can't locate it on my computer to remove it.How do i get rid of it and more importantly how did it get on my computer in the first place?
View 10 Replies
View Related
Jul 5, 2009
U have spent 4 days trying to configure my router thinking that it is my router that is not working but when I go to my dynamic dns or my static ip address it takes me to my admin router on the local computers.when I type httpd it says it cannot bind to port 0.0.0.0:80 i checked it is set up to listen to port 80 this is really confusing me i am beginning to think the people who built my server did not set it up properly if i go to localhost or 0.0.0.127 it goes to the apache default page fine.I have not changed anything since it wad installed except the centos 5 updates any ideas?When i login my password is root and the password is the default I have changed nothing else on the system as I still have no clue about it.Just to clarify on my router I have port 80 and port 443 set to my static ip address is this correct or should it be the eth0 Bcast ip address?Can anyone give me an idea of what i need to check? On my router I have set up port 80 and port 443 and dynamic dns and static ip address.Sorry I am totally new to linux never used it before would be nice if anyone has any ideas how i can proceed with this.
View 1 Replies
View Related
Feb 1, 2010
I want to install Bugzilla on ubuntu 9.10
All the tutorials I found ask to install bugzilla from source.
Is installing from synaptic not advisable?
View 3 Replies
View Related
Sep 8, 2009
When I installed F11 I chose to install Bugzilla with it. It is installed and working great, but It is not the newest version, and apparently the repositories I have installed do not have the newest version. Anyone know what repository I could get this from, if its possible?
View 3 Replies
View Related
Sep 17, 2010
First of all, I was unsure whether this should go in General Support or in Installation. The problem is occurring on my first boot of a freshly installed F12 system, but the immediate problem seems to be more concerned with Automatic Bug Reporting Tool and/or Bugzilla plugin.
That more immediate problem is: when I run the tool to report a crash, it complains that the Bugzilla Plugin is not properly configured. So I look at Edit->Plugins->Bugzilla just as it suggests, and I see a bugzilla URL that looks right, and blank Login and Password.
However, since I just did the F12 installation, which presumably is designed for any user, not a developer or member of the F12 project, there is no reason to assume that I even HAVE a login. So this is the first question: what Login and Password are they expecting here? Is there a special Login for the ABRT?
View 1 Replies
View Related
May 6, 2010
I Installed Bugzilla 3.2 on Centos 5.3.I have other window 2003 server (Domain Controller).But it is Windows Small Business Server 2003.i have many OU on that.I want to integrate Bugzilla 3.2 with LDAP.
View 2 Replies
View Related
Mar 21, 2011
I installed Bugzilla on a Fedora 11 system and got it running. In the Admin options I set it to redirect all hits to SSL port 443.
This was a mistake.
After I saved that setting, every single request on all browsers seem to loop infinitely and the browser stops it - but I can't access any of the pages.
Does anybody know where that setting is set? Is it configured in Apache for that VHost? All I've found on the subject is changing the setting in Admin Options.
View 2 Replies
View Related
Jul 16, 2010
when i am prompted to send a bug report i am given two choices. either i ll use bugzilla or logger. which one should i be using?
View 2 Replies
View Related
Jul 19, 2010
I have recently upgraded from FC12 to FC13, and last week I updated all packages using YUM. The system is running as a VM inside CentOS 5.5 using KVM. SELinux is enforcing, using the targeted policy. Bugzilla is version 3.6.1 and was NOT installed using RPM or YUM.
Bugzilla was working OK on this machine until SELinux was upgraded last week from 3.7.19-28 to 3.7.19-33, and is still broken after testing 3.7.19-37 from the testing repo. With SELinux in enforcing mode, apache returns error 500 when I browse to the main bugzilla page. The apache error log shows this:-
Code:
[Mon Jul 19 13:15:08 2010] [error] [client 192.168.40.1] (13)Permission denied: exec of '/var/www/html/bugzilla/index.cgi' failed
Nothing, and I mean absolutely nothing, is recorded in /var/log/audit/audit.log, /var/log/messages or /var/log/secure.
[Code]....
View 5 Replies
View Related
Feb 10, 2011
i have my personal email address in one of my bugzilla report.
really tired from spam. how can i drop my personal info from it?
[URL]
View 4 Replies
View Related
May 7, 2010
How to install Bugzilla 3.6 on Ubuntu Lucid 10.4 through the Advanced Packaging Tool(apt-get install) ???
View 4 Replies
View Related
Jul 21, 2011
I am using RHEL5 64 bit. I am trying to install bugzilla. While installing i am getting error.
View 2 Replies
View Related
Dec 13, 2010
I am trying to make subversion to use the user account from bugzilla. I surf the net and found many threads related but most of them are out-of-dated. I have install the following software on ubuntu10.10
1. apache2 -- apt-get install apache
2. subversion -- apt-get install subversion
3. bugzilla3 -- apt-get install bugzilla3
4. libapache2-mod-auth-mysql -- apt-get install libapache2-mod-auth-mysql
After installing those softwares needed, I edited the conf file on /etc/apache2/mods-available/dav_svn.conf
Code:
<Location /svn>
DAV svn
SVNParentPath /svnroot
SVNListParentPath On
[code]....
View 1 Replies
View Related
May 16, 2011
I've done a clean install of Slackware 13.37 64-bit and am having trouble with building the Perl modules for Bugzilla 4.x.x (downloaded yesterday with bzr). This same problem exists with both Bugzilla stable and 4.1.2+.Executing checksetup.pl results in
Code:
checksetup.pl
* This is Bugzilla 4.1.2+ on perl 5.12.3
[code]....
View 3 Replies
View Related
Apr 16, 2010
I am running an openSuse 11.1 server.
How easy is it to install a complete Bugzilla system for my own internal use?
Is there an rpm that will set it up automatically?
Is it part of the distro? Or 11.2 or 11.3?
What is the easiest way to install it?
View 8 Replies
View Related
Aug 9, 2010
so I got bugzilla up and running (finally) on an ubuntu server...
but in order to use the ldap integration, you need:
Mozilla::LDAP (aka PerLDAP) Perl module
Mozilla/Netscape LDAP SDK
neither of which exist in the repositories, or anywhere on the internet. the best I could find was a request to build a package from over a year ago...
I did find source that I can build... the Perl module builds and starts to begin the setup process -- but I get stuck at the point where it requires the SDK... which I cannot find anywhere in a plain downloadable form. the one I found seems incomplete:
[URL]
View 1 Replies
View Related
Feb 13, 2010
Planning to put a bugzilla server for bug reporting at our office. I have loaded and configured bugzilla on one of our machines running CentOS5.4. And there is another machine on CentOS5.4 that is running Zimbra community edition. Both are distinct machines. Zimbra is running fine and so is Bugzilla. I want bugzilla to use this Zimbra server to send mails so that I can use this internal mail server for my purpose.
This is the first time I am putting up bugzilla and have never worked on it but documentation helped. But I could not find any reference on how to do this?
View 1 Replies
View Related
Jan 2, 2011
I was able to successfully upgrade my debian server from Etch to Lenny, however now I am unable to access Bugzilla via the establish url's.
The error I am getting is:
Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [no address given] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
Here is my error.log output:
[Sun Jan 02 10:58:55 2011] [error] [client 158.114.150.87] Not a subroutine reference at Bugzilla/Template.pm line 59.
[Sun Jan 02 10:58:55 2011] [error] [client 158.114.150.87] Compilation failed in require at Bugzilla.pm line 34.
[Code]....
Ok so after all the searching I did it came down to the simple fact that Bugzilla 2.22 doesn't work with Perl 5.10. I am in the process of upgrading to Bugzilla3 and running into some issues there getting my backup database loaded due to the install couldn't finish.
When you upgrade you are prompted to create a new database or use one already created. When I selected to use one already created is caused a break in the installation and I now I can't seem to get the installation to finish.
View 1 Replies
View Related
Feb 28, 2011
I am looking into setting up a system that can be used to track the progress and/or status of various projects being done by our I.T. staff. The specific features that I am looking for in the software are the following:
1. Project monitoring
2. Metrics
3. Email reminders
4. Bug tracking
5. Reporting
6. Scheduling
I have deployed applications like Bugzilla and RT Tracker in the past. However it has been several years since I have used either application so I am sure if either application can do some or all of the items that were listed above. Does anyone know if either of the two applications mentioned will do the items listed, or is there another application that is best suited for the job?
View 1 Replies
View Related
Jul 24, 2010
I didn't back up the blasted /etc/httpd stuff.
I do a "clean" root-only install; i.e., the only partitions that are formatted are the root and usr partition leaving the others untouched (so I don't have to restore the entire thing every time or fiddle with updating). That leaves almost everything in place with only a few edits and additions to make to get back in business; smart and dumb and the same time, sigh.
The partitions look like this for what it's worth:
Code:
Anyway, my web server comes up just fine and other applications work as expected except for Bugzilla and I can't remember what the heck it is I have to do to get it going again. I add a file, httpd-bugzilla.conf in the extra directory and include it at the end of httpd.conf:
Code:
In the above, /var/www/htdocs/bugzilla is not a symbolic link, Bugzilla is actually installed there (and has worked just fine for a long, long time). And, yeah, I know I'm not really supposed to do that but there it is.
I also run checksetup.pl which completes cleanly (it also sets permission masks and group) and double-check that localconfig looks like it ought to.
Seems like that ought to do it, but...
Code:
View 1 Replies
View Related