CentOS 5 :: Redhat Cluster Suite - How To Configure Failback
May 6, 2009
i am using the redhat cluster suite (luci and ricci) on my centos 5.3. i have 2 nodes in a cluster. when i poweroff the first node on wich a vm service is running, the service switchtes to node2. so far, so good :) but when i restart node1 the service is not failback to node1! i have created a failover domain with both nodes and priorized whre node1 has prio1 and node2 has prio2.
View 4 Replies
ADVERTISEMENT
Nov 6, 2010
I am trying to build GFS2 cluster with 2 or 3 Fedora 14 nodes, but I've encountered some problems from the start. First luci does not work at all in Fedora 14. There is no luci_admin and even if I manage to start luci service, I get a blank white screen when I try to open it from the browser. I've googled a bit and found that I'd might be able to setup GFS if I manage to build cluster.conf manually and start the cluster suite, but I cannot find documentation on how to create cluster.conf anywhere. If anyone knows how to setup GFS2 without a cluster suite or how to configure cluster.conf.
View 9 Replies
View Related
Jul 17, 2011
I have just installed a two server cluster with ricci luci and conga on centos 5.6 32bit , both servers are vmware guests and have a shared storage disk connected to them both
with a GFS2 file system on them + fencing agents configured to work with VMware Vcenter.
(this is supported by vmware and works great on 4 other centos clusters i have been runing for 4 monthes with no CLVMD).
In this setup i used for the first time CLVMD as recommnded by RedHat so i could have the flexablitly of LVM under the GFS2 file system but , i have been getting some Strange problem with it , some times after a developer has done some IO heavy task like unziping a file or a simple TAR the load goes to 10 - 15 and no task can be killed , trying to reboot the server hangs.
After hard shutting the server every thing works ok until the next time some one does the same IO work as before.
View 5 Replies
View Related
Oct 22, 2009
This is my first post, and i have a question with the fence software for VMWare ESXi. The fence_vmware agent only works with ESX, and redhat (in you GIT repository) has submited a new agent called fence_vmware_ng that claims to work with ESXi. But the problem is that they do not specify the version that works with that. Anybody has test the fence_vmware_ng agent for VMWare ESXi 4.0 ?, i follow the instructions here: [URL]...and i can install the software, the API from VMWARE site, etc, but in the moment when i run the agent nothing happen, The agent connects to server, i see in logs, but the off-reboot-on operations not works. Only works status operations, that return the state of a virtual machine. I have CentOS 5.3 (fully today updated) with RHCS.
View 6 Replies
View Related
May 18, 2010
I have made a cluster between two server.In luci I can see that my cluster is green and the two nodes to.I have make an IP resource and associate it to a service : green : I can relocate the service from a node to the other one and the IP appears in the list of IP addresses The problem is that I have made the same in order to configure tomcat and postgresql and it does not work...I put my configuration only for ip and tomcat:
My host configuration:
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
10.0.0.1 server1.domain.com server1
10.0.0.2 server2.domain.com server2
View 7 Replies
View Related
May 18, 2010
I have made a cluster between two server.
In luci I can see that my cluster is green and the two nodes to.
I have make an IP resource and associate it to a service : green : I can relocate the service from a node to the other one and the IP appears in the list of IP addresses
The problem is that I have made the same in order to configure tomcat and postgresql and it does not work...
I put my configuration only for ip and tomcat:
My host configuration code...
View 4 Replies
View Related
Sep 1, 2011
I am working in a project that needs to set up an Apache Web Cluster. The cluster needs to be High-availability (HA) cluster and Load-balancing cluster. Someone mentioned the use of Red Hat Cluster Suite, but, honestly, I can't figure out how it works, I haven't been able to configure it correctly. The project currently have two nodes, but we need to support at least three nodes in the cluster.
View 5 Replies
View Related
Apr 14, 2010
I am trying to configure redhat cluster first time but no idea how to do it. I am using rhel 5.2. I have copied cluster rpms from redhat media and tried to install them but facing alot of dependencies problem. Can some one please guide how can i do redhat clustering from start. I am doing this for configuring single node clustering for zimbra suite but it is the requirement to configure redhat cluster first. One more thing i am using two virtual machines installed by using virtual box.
View 3 Replies
View Related
Mar 20, 2011
I am planning to configure RedHat cluster on vmware, i dont know how to configure, i googled a lot but couldn't find satisfactory docs for configuring, can any one provide me step-by-step or good docs to go ahead.
View 1 Replies
View Related
Dec 22, 2010
I have added apache application into redhat cluster. If the apache process failed, it will cause the service group fail over. I want to disable the application monitoring. I search throung Internet and it depends on the apache init script. If I change /etc/init.d/httpd status always return 0(success). THe service group will not fail over even apache failed.
However, I want to remain the application monitoring but stop failover. If the application like apache failed, I want Redhat cluster to try restart the application like 3 or 4 times. If restart failed, it will not failover.
View 1 Replies
View Related
Jun 13, 2010
I was following [URL] for the cluster setup. But things dint work out. One Doubt to ask "Do I need the services cman, ccsd and rgmanager one at a time on the both machine. I have been running it through script.
View 1 Replies
View Related
Nov 20, 2009
I am using the Redhat Cluster Suite (luci and ricci) on my centos 5.4. i have 2 nodes in a cluster.I had clustered an apache server.The service is up end running and i can stop,start and switch on all two node.The problem is when i try to simulate a fault for one node.For example:The apache resource stay on the first cluster node.If i power off the first cluster node (not halt or init 0 but take off the eletric power off), the second cluster node not take the resource.With the clustat command, the service still running on the first node.But the service is down. The first node is dead.Only one the first node is join again the cluster the resource goes up on the second node.
View 7 Replies
View Related
Jan 8, 2010
i want to configure a cluster for combining CPU / RAM / Hard disk
View 3 Replies
View Related
Jul 23, 2010
I'm trying to configure an ISCSI/DRBD high-availability cluster and I'd like to know what is the best option between OpenAIS and Heartbeat. I've seen they both are included in Centos Repos, yet OpenAIS requires installing 2 addition repos to install Pacemaker (EPEL and Clusterlab repos).
View 1 Replies
View Related
Dec 2, 2010
Trying to build a RAC server. I have 5 ips that the Network Team has provided with. They are like this:
LAN IP (IP & Cable, which means physical card is present)
TSM IP (Tivoli Storage Manager-Backup) (IP & Cable)
ISO1 (Heartbeat 1) (IP & Cable)
[code]....
View 2 Replies
View Related
Jul 19, 2011
I'm trying to build cluster computer system using redhat linux enterprise 5.5. And I'm on the step to set up the NFS mounting. (step 3 of part VI on this paper: However, I kept getting "permission denied" when I used the command "mount -t" to mount the slave node onto the hard drive of the master node. Even when I edited /etc/fstab file to make it automatically set up during booting, I still receive the same result. By the way, I've already logged in as a root user on both slave and master nodes.
View 1 Replies
View Related
Jun 14, 2009
what rpms should I need install for setting up redhat cluster on RHEL 5.0 I want to create two RHEL 5.0 nodes as one cluster having oracle database server installed. And please note I have created these two nodes on VMware server for testing purpose. is it possible for creating cluster of two virtual guests.
View 3 Replies
View Related
Oct 25, 2010
I have two node redhat cluster for mysql database.The problem is that after updating the packages on both of the nodes after and previously the sevices was not able to relocated on second one , even rebooting the server the problem occurs.While starting the service on second node it started on the first one.Other services are running fine on both nodes.I have checked the /etc/hosts, bonding and many more files and seems to good.find the log for reference.
<notice> Starting stopped service service:hell
Oct 22 14:35:51 indls0040 kernel: kjournald starting. Commit interval 5 seconds
Oct 22 14:35:51 indls0040 kernel: EXT3-fs warning: maximal mount count reached, running
[code]...
View 1 Replies
View Related
Mar 18, 2011
I was given task to install redhat linux os on one of the compute node on server which doesn't have cd/dvd drive or usb port.I have installation media as well ISO image. This server is on network, so I can access it via my PC which is running window 7.I think, I have 2 choice to install:1. Copy iso image to head node on server and then install linux os on compute node via nfs.r2. Use my PC dvd drive to install linux on compute node via network.But I don't know how to do it.
View 2 Replies
View Related
Sep 17, 2009
I am trying to create a 2nd node from last couple of days but no luck.do this.I have gone through these article again and again:Here is my setup
node1 ( ricci + luci) : which is working fine
node2 (ricci only) : this is giving me problem
node1
[code]...
View 1 Replies
View Related
Aug 31, 2010
After 5+ years of using Ubuntu, I am switching to it as my desktop. On my old FreeBSD desktop i was running KDE3; now I am runnung 10.04.1 and find that even tho things are more friendly with KDE4, one of the tools I use most,kttsmgr, no longer works like it did on my previous desktop.
How can I configure kttsmgr to use festival (right now it says "espeak") and to present the dialogue that prints the strings beneath what is being read? --Note that I downloaded flite and eflite for testing purposes. Both fail. not a peep. I do have audio with songs and can listen to streams, but nothing from ktts*
View 1 Replies
View Related
Jan 24, 2011
I need to configure autostart of oracle database 11g & oracle soa suite 11g after successful OS startup. Linux: Redhat version 5. I have commands needed for startup, but not sure on where to keep the file.
View 2 Replies
View Related
Apr 9, 2010
I have a 2 node RH 5u4 64-bit. I have installed and configured the latest Veritas CFS (Cluster File System) which also uses Veritas Cluster Server. File system if VxFS. Storage is on EMC Symmetrix arrays with Veritas Mirroring between the arrays.We have noticed that running 'du -hs' on the shared directory/filesystem where it takes about 3 minutes on one node and 30 - 45 minutes on the other node.I've been running strace on 'du'.'du' runs an 'lstat' on each file (66,000+ files). On the slower node, the ave time spent in 'du' is about .001 seconds longer, which accounts for the 30-45 minutes. Also, the standard deviation is much larger, which means to me that the lstat times are all over the place!Another interesting thing is that iozone profiling shows that the i/o rates from both nodes are darn near identical, with no anomalies at various buffer & file sizes! And, iostat looks really good as does 'vxdmpadm iostat show
View 3 Replies
View Related
Jul 18, 2011
Im having a frustrating issue with my two machine cluster I setup using Conga. Everything was working great except now when lucci starts mysql the port (3306) is never opened to outside machines. I can do a "ps -ef | grep mysql" and see it running as well as login to mysql on the node it is running on - but an nmap of the machine does not show the 3306 port and I cannot login to mysql remotely and yes I turned off all iptables(iptables,ip6tables) and SElinux is disabled.What am I missing here? If I start mysql on my own (and it is using the same my.cnf as lucci is) it does show the port open and works perfect,t for some reason when lucci starts it, no dice
View 1 Replies
View Related
Dec 22, 2010
I want to create redhat cluster on(vmware) OS Redhat Enterprise Server 5.5
Install Luci on node1
Install ricci on node2
Install ricci on node3
All the computer name records in all system host file. When I try to create new cluster( luci_install init) then showing error...
Status messages:
* Host stationx.example.com is already authenticated
* Host stationy.example.com is already authenticated
[dismiss]
The following errors occurred:
* Unable to create the cluster Luci database objects
***No any cluster.conf file created on any node
I have reinstall the node, but getting same error.
View 1 Replies
View Related
Jan 24, 2010
I need to install Cluster package and configure it on Dell Power Edge1950 intel Server on Red had linux 5 OS. how do i get cluster package for the same and configure it.
View 1 Replies
View Related
Jan 28, 2010
We've been having lots of problems with burning CD-Rs on our Dell PowerEdge and T300 servers. We've had the CD recorders replaced frequently, and that often fixes the problem, but then we'll start having problems again. Usually it is the CD refuses to write, or it gets written but can't be read. Often, if I re-run the burn with the same blank CD, it will be fine.
I'd like to test some CD-Rs and compare error rates so I can recommend what CD-R media we should be using. Currently we are using Memorex and Verbatim CD-Rs. Is there a good cd recording/testing suite for Linux that I could use to do this?
View 1 Replies
View Related
Nov 20, 2009
I want to configure two node cluster for qmail-toaster?? My idea is.. if one server hardware gets failed it should transfer/migrate service to other qmail-toaster server with all settings like ... domains/users/password etc etc.
View 2 Replies
View Related
May 28, 2010
I am trying to setup Rocks Cluster on a Cluster containing 1 Master node and 23 slave nodes connected via a Switch. The master node's eth1 is connected to public IP and eth0 is connected to the slave nodes via the switch.
I was able to install the Rocks cluster on the machine, I configured the IP for master through DHCP. When I run the command 'insert-ethers' on the master node, it doesnot get me any slave nodes.
setting up the Rocks cluster on all the nodes?
View 1 Replies
View Related
Aug 12, 2011
well sorry I'm new in this but I just made my cluster with about 4 good machines each with 2 or more gbs of memory and dual-core processor but the question is i can install an operating system in nodes as having the frontend or not different if possible, and how i can do it because i don't now how and i don't find material and tutorials that can help me..
View 3 Replies
View Related