I have some vhosts set up, and they work once apache is restarted. But, as a few minutes go by, all the vhosts end up going to the default apache "It Works!" page.
I don't think it's the vhost config since it does work initially (and I've triple checked it all by now).
I am running htcache (or whatever the disk caching module is called).
I have two sites (actually more) configured in apache2. All sites have their own vhost file, which I enable or disable with a2enmod or a2dismod.
This works fine.
I have configured some SSL sites inside the vhost files, where I have created two different certificates. One for each site.
BUT, if I enable example2.com, it will always load the certificate from webmail.example1.com when i go to the ssl site webmail.example2.com, nomather what (because it comes first in the alphabet maybe) ?.
If I then uncomment the SSL site for example1.com if will work fine with webmail.example2.com, but of course then the site for webmail.example1.com is not working since it is uncommented.
So for some reason, it "falls back" to this site webmail.example1.com everytime, which I have absolutely no idea why it does this. All the other vhost running on port 80 configurations, works fine, but just not the SSL (port 443 ones).
Example1.com:
Code:
<VirtualHost *:80>
DocumentRoot /home/example1com/wwwroot/
ServerName www.example1.com:80
ServerAlias example1.com:80
[Code].....
I run ubuntu 10.10 with apache2 and have 2 virtual hosts set up
here is an example of one of the virtual hosts
<VirtualHost *:80>
ServerName blah.endofinternet.org
ServerAlias blah.endofinternet.org
ServerAdmin davidboychuck@gmail.com
DocumentRoot /var/www/blah
[Code]....
Everything was working perfectly until i changed the internal ip of my router from 192.168.1 to 192.168.192 and now virtual hosting no longer works. As far as I can tell everything is setup correctly. I made no changes to the configuration files. Vhosts just literally stopped working. I've tried clearing dns cache not sure what to do at this point. I have tried to a2dissite and then a2ensite and reload the configurations but it literally just seems like apache is not looking for the vhosts in /etc/apache2/sites-enabled even though my apache2.conf still includes them
#Include the virtual host configurations:
Include sites-enabled/
From the apache error log:
[Sun Apr 03 16:41:50 2011] [error] [client 66.249.72.208] script '/var/www/index.php' not found or unable to stat
[Code].....
It looks like it's just not trying to use the vhost document root because when i go to blah.endofinternet.org it just takes me to the default site.
I am trying to add a second vhost to my once working apache config. Now I have things really bollixed up and cannot access anything. I am getting a error 400. The access log shows this:
192.168.0.2 - - [17/Mar/2011:11:24:41 -0400] "GET /" 400 951
192.168.0.2 - - [17/Mar/2011:11:24:41 -0400] "GET /" 400 951 "-" "-"
I have a default (I think) httpd.conf file and put all my config stuff in files in vhosts.d. I have 3 files there:
[Code]...
any1 know how to config apache so i can use ServerName at my web browser ?
here is what i am trying to do: i need to host a number of web sites at my mac, for example: hostone.com, hosttwo.com, hostthree.com and etc since i need to host more than one website at the same pc, i use name based virtual hosts so i have hostone at 192.168.0.1:1234 and a servername of "hostone" hosttwo at 192.168.0.1:1235 with a server name of "hosttwo" and etc
my question is , how do i config my local settings, so all of my local network computers can access "hostone" site by type "hostone" at their browser and "hosttwo" site by type "hosttwo" at their browser
I've deleted /etc/apache2 and did run:
Code:
sudo apt-get -o DPkg::Options::="--force-confmiss" --reinstall install apache2.2-common
to get the default config back.
But starting the server via:
Code:
sudo /etc/init.d/apache2
results in:
Code:
Syntax error on line 161 of /etc/apache2/apache2.conf:
Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration
line 160-163 look like this:
Code:
<Files ~ "^.ht">
Order Allow,Deny # line in question
Deny from all
</Files>
The funny thing is that the exact same definition is in a debian lenny server config on another server. So why did this install a not working config?
I just removed apache2 via:
Code:
sudo aptitude remove apache2
sudo rm -r /etc/apache2
and reinstalled it via:
Code:
sudo aptitude install apache2
which also did not fix the config bug?
For testing I installed apache2 on another ubuntu 9.10 and did just copy the folder /etc/apache2 to my local installation - this fixed the problem. Still, why cant I reinstall apache2 with a working config?
I'm using mencoder to capture audio from a Encore ENLTV-FM3 video capture device. I have recently noticed that, since one week ago, when the machine was forcibly restarted due to a power outage, all recordings are slightly pitched, they play back slower than they should.
I narrowed down the problem to the following command line:
$ time mencoder -really-quiet -tv driver=v4l2:device=/dev/video1:chanlist=us-cable:audiorate=32000:alsa:adevice=hw.1:input=0:amode=1:normid=11 -endpos 00:10:00 -ovc copy -oac pcm -of rawaudio -o test-32000.wav tv://69
real 9m54.886s
user 0m5.536s
sys 0m1.740s
$ ls -l test-32000.wav
-rw-r--r--@ 1 martin martin 76800000 Mar 15 17:20 test-32000.wav
Somehow, mencode managed to gather precisely 10 minutes worth of raw audio in 9m 55s. That's not physically possible, unless the capture device's A/D converters are "overclocked". I can't think of any other explanation besides hardware failure. Can that be? Could it be that something got burnt during the power outage and now the capture device's internal clock went nuts?
Since the machine's restart, I've also noticed dmesg is flooded with entries like this:
CE: hpet increased min_delta_ns to XXX nsec
Which seem to indicate that the computer's high precision event timer is somehow out of sync. Does this have to do with the audio issue? Can it be that the audio converter's sample rate is linked to the HPET? I'm totally lost here. Has anyone bumped into something similar?
I have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
View 9 Replies View RelatedI am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
I just added a ssl vhost.php files are not running on it, they just get downloaded when I click them. All my non-ssl vhosts were added by the admin software of my hosting company, but I had to manually add the vhost entry for my ssl vhost.Here is the entry I added for my ssl vhost:
Code:
<VirtualHost www.vhost.com:443>
DocumentRoot "/var/www/vhosts/vhost.com/httpsdocs"
[code]....
I have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
Code:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
I run a small shellserver for my friends, and added a few IP's for vhosts. I tried google, but found nothing so I wonder if vhost listing script for IPv4 and IPv6?
View 1 Replies View RelatedI got my VPS last day and i deside to setup everything myself, but i just came to virtualhost in apache when i got stuck.
i have Ubuntu Server 9.10 whit Apache2
Let me begin to show my config files.
ports.conf
Code:
#NameVirtualHost *:80
Listen 80
<IfModule mod_ssl.c>
# SSL name based virtual hosts are not yet supported, therefore no
# NameVirtualHost statement here
[Code]....
After Ubuntu autoupgraded my Apache, some VHosts are nor working anymore and PHP Code is not oarsed any longer. I think the apache2.conf was overwritten. I do not have a clue how ti fix that, I tried some things but now I am stuck. I have only three hosts: the default, an svn (over port 443) and one called "imcar" which has PHP scripts to be parsed.
So, in my apache2.conf I have this:
Code:
DocumentRoot /var/www
ServerName localhost
The imcar host is set up like this:
Code:
<VirtualHost *:80>
ServerName imcar
ServerAdmin webmaster@imcar
DocumentRoot /var/www/imcar
<Directory /var/www/imcar>
Options FollowSymLinks Indexes
AllowOverride None
Order allow,deny
allow from all
</Directory>
ErrorLog /var/log/apache2/imcar-error.log
LogLevel warn
CustomLog /var/log/apache2/access.log combined
ServerSignature On
</VirtualHost>
If I go to imcar in the browser, the default DocumentRoot is shown. If I remove the default DocumentRoot, I get a 404 on imcar.
I read that since httpd 2.2.12 (I run 2.2.15), it is now possible to run multiple SSL certs on multiple vhosts on one ip. I didn't find a procedure to do it. Do you know how to?
View 1 Replies View RelatedI would like to set up apache so that:
[code]....
Is it possible with only 1 IP or do i need 2 IPs? I have tried several configurations, but they always seem to lead to a dead end with either the IP-site or the domain-sites not working. There has to be a right way to do this.
During a request of a VPS, the provider asks me for a hostname and for the VPS I have requested which will run on a Debian. I entered 'dryaf' as hostname. What I want to do with this VPS is to point a website to its IP. I learn that I can create a vhost and configure VPS to redirect each domain name to its folder using vhost but I didn't learn any importance for hostname I don't think it should be mandatory localhost or has the form domain1.com so during request I just tipped dryaf for the hostname of the VPS. Should the hostname follows a special rule for giving it a name or no?
View 6 Replies View RelatedI'v multi v-host . need to make each V-Host work under separate user (not apache user).
There is one module/patch call " mpm-itk " . In Debian/Ubuntu every thing is sweet
just do
apt-get install apache2-mpm-prefork libapache2-mod-php5 or aptitude install apache2-mpm-itk
that is all
But in CentOS 5.3 , there is always some difficult different (Why ? I do not know)
Kindly, Look to this solutions : [URL]
Is there possibility to avoid this complications ?
- I need solution without compiling + patching the apache , Is this possible ?
I'm setting up a server on Ubuntu 10.04 for development. It all seems to work nicely, I just have one thing that's bugging me. I have a project in /var/www/portfolio, which is as you may guess my portfolio. Instead of the link http://localhost/portfolio I'd like to use http://portfolio.nl. So I set up a file 'portfolio.nl' under sites-available and a symlink on sites-enabled containing this: To get this to work on my local machine I set up this in /etc/hosts:
[Code]...
I'm working on an ADSL2 connection that connects via PPPoE and it is assigned a static IP. On top of the static, the ISP has assigned a small block of 6 useable IP addresses.
- The primary static IP is on the interface ppp0
- The other 6 IPs are configured as eth0:1, eth0:2, eth0:3 etc.
With the above setup all IPs are reachable and useable on the internet.
- The revers DNS has been updated for a few of these and resolves with no problems. ie: eth0:1 has the 123.123.123.123 IP and resolves to blah.host.com and blah.host.com resolves to the IP address.
- To test this I have tried a program like BNC to bind to the IP address on eth0:1 but for some reason when connecting externally the host address is coming up with the FQDN on ppp0 interface IP, not the vhost IP.
Questions is, is this the normal behaviour since its a PPPoE connection and would only work if the ISP supported a bridged connection? something on the ISP end not allowing this to work?
Here my setup of Apache :
I have two virtual hosts on separate IP and on both I am using port :80 one is main website domain.name and another webmail.domain.name. And to get full link path I am using index.html with redirection derectives. My question how I can setup each Vhost to he is own redirection directive to set two full link like:
when type webmail.domainname -----> redirect to webmail.domainname/horde/imp/file.php
and www.domainname ------> redirect to www.domainname/csr/
Right now working only one of this Vhosts, just problem to separate them when I type www.domainname -----> apache redirect to webmail.domainname.
index.html
<html>
<head>
<title>WebSite</title>
<meta http-equiv="REFRESH" content="1;url=http://www.domainname/csr/"></HEAD>
<BODY>REDIRECTION</BODY>
</HTML> .....
Do you have any idea on how to achieve my goal? Here is the scenario. As a requirement on our development process for every ticket we have we need to create a branch(svn) so that we can develop without disturbing other developer. Now for every checkout I made I need to create a vhost so that I can develop first in my local before deploying to the branch.The site I'm working on is based in Drupal. The files I checked out is just the all folder of Drupal. The core files are already in my local. So the script would grab the core files and copy the all folder in my checkout branch then put them in the vhost.So basically I need a script that will do these automatically for me:1. Setup a vhost Ex: My branch name is 1205googleplusone. Inside that branch has two folders, all and default. What I need only is the DocumentRoot should only point to all folder.2. Update the /etc/hosts Ex: The URL should be 1205googleplusone.domain.com. 3. Create a new database for the new site The script should create a new database and update the configuration.php
View 6 Replies View RelatedOn one of my servers (Centos 5.5), I have been hosting articularly complex CRM application for one of my clients. Recently they have asked about configuring SSL connections to the CRM. Problem is, SSL is already configured for their main domain but not the sub-domain where the CRM application is accessed. Rather than purchasing another SSL certificate for their sub-domain (and probably another IP address),ld it be possible to setup a redirection from the subdomain to a sub-directory in the SSL directory using mod_rewrite. I have searched online and through the other posts on LinuxQuestions but nothing I have tried works.For example:[URl]
View 2 Replies View RelatedI have looked around a while for the answer, but nothing really fits. Here is the scenario. I have one server and a few openvz VE's running. I want to be able to auth whatever possible with LDAP. I have an LDAP server setup on the host and auth works for the server users. The tricky part for me is that every VE has their own domain. and if I can do that, they will also have the same login for their VE on said domain. I can setup users and the required software on the hosts and guest, but I guess I am confused at how to manage the multiple domain part of things.
not sure if proftp can do 'name based' stuff like apache, but if it can, we can point ftp.clientdomain.foo to the main server and handle it that way.
I was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config
[Code]...
I'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
I am running a server with a GRSecurity patched Kernel 2.6.32.36. I've tried to optimize the kernel as much as I can and know it (removing options, not needed drivers and so on) and compiled the modules into the kernel (no loadable modules anymore). I've started with Slackware 13.0 and the default config for 2.6.29.6-huge. Still I am not sure what to remove/optimize further now.
My question: Is there a way to boot with a kernel with loadable modules, check which modules are really needed for this hardware, (do something like lsmod) and save the running configuration modules for a next kernel compile to be the default .config instead of writing them down by hand and search for the appropriate names in .config or during menuconfig? (Note: zcat /proc/config.gz > .config is NOT the way I want, as it gives me just the current kernel config)
Installation of SUSE 11 server now when I try to configure apache2 (opening port 80) I get a "cannot adjust apache2 service" error??? Can anyone shed some light on this.
View 1 Replies View RelatedI currently can run an old swf on my Chumby 8 device by storing and using these three files on a USB plugged into the device
config
<?xml version="1.0" encoding="utf-8" ?>
- <config>
[code]...
I have a lot virtual hosts running on Apache. Directory browsing is enabled on every single vhost (by default), and I want to disable this globally. Been searching and struggling with this for some time now, but can't seem to get it right. I have tried following in my apache2.conf
Code:
<Directory /var/www/>
Options -Indexes FollowSymLinks MultiViews
AllowOverride None
</Directory>
Also tried following in /sites-available/default
[Code]...
I know I can throw "Options -Indexes" on every single vhost, but it must be possible to do this globally.What am I doing wrong?