Server :: Throw "Options -Indexes" On Every Single Vhost?
Jan 18, 2011
I have a lot virtual hosts running on Apache. Directory browsing is enabled on every single vhost (by default), and I want to disable this globally. Been searching and struggling with this for some time now, but can't seem to get it right. I have tried following in my apache2.conf
Code:
<Directory /var/www/>
Options -Indexes FollowSymLinks MultiViews
AllowOverride None
</Directory>
Also tried following in /sites-available/default
[Code]...
I know I can throw "Options -Indexes" on every single vhost, but it must be possible to do this globally.What am I doing wrong?
View 2 Replies
ADVERTISEMENT
Feb 24, 2010
In our apache web server, we have a number of virtual hosts running. I wanted to create an alias to a folder only to a specific virtual host. So what I did is, in the virtual host configuration section of that specific site, I added as below:
[Code]..
However, with this configuration,if index.html is not present in the system , I am still able to see directory listing of all files under that folder myfiles. What could be going wrong ? Why "options" directive of is not working once it is placed inside <directory > of <virtualhost>? If I move <directory> in the main httpd.conf (ie , outside virtual host section), then again it works fine. But I don't want this as I don't want other virtual hosts also to be able to access to that directory... In the main httpd.conf, I have something like
[Code]....
View 3 Replies
View Related
Mar 27, 2010
I'm running 9.10 and apache2.I have a virtual hostThis works. I'm trying to share some files in a directory: added this in the virtualhost section:
<Directory "/var/www/hindbrain/test">
Options Indexes MultiViews +FollowSymLinks
IndexOptions +FancyIndexing
[code]....
View 9 Replies
View Related
Sep 24, 2010
I have two sites (actually more) configured in apache2. All sites have their own vhost file, which I enable or disable with a2enmod or a2dismod.
This works fine.
I have configured some SSL sites inside the vhost files, where I have created two different certificates. One for each site.
BUT, if I enable example2.com, it will always load the certificate from webmail.example1.com when i go to the ssl site webmail.example2.com, nomather what (because it comes first in the alphabet maybe) ?.
If I then uncomment the SSL site for example1.com if will work fine with webmail.example2.com, but of course then the site for webmail.example1.com is not working since it is uncommented.
So for some reason, it "falls back" to this site webmail.example1.com everytime, which I have absolutely no idea why it does this. All the other vhost running on port 80 configurations, works fine, but just not the SSL (port 443 ones).
Example1.com:
Code:
<VirtualHost *:80>
DocumentRoot /home/example1com/wwwroot/
ServerName www.example1.com:80
ServerAlias example1.com:80
[Code].....
View 2 Replies
View Related
Feb 20, 2010
I've installed webdav on my server and I can access it fine through cadaver. However, when I try to access it via nautilus, I get Forbidden. It is NOT secured (SSL). When I try to access it via firefox, I get an error since I DO NOT have "Options Indexes" in my apache config file. If I add this option in, then I can browse the root direction and webdav folder via firefox, but still not from nautilus. what other information you need. I've googled and searched the forums for awhile, but not "solutions" I found have worked for me. I want the webdav folder to just be a single folder within the direction, so this is how I have my config file setup:
[Code]....
As a side-note...when I included "Option Indexes", it allowed me to view the passwd.dav file from firefox!That doesn't seem very good...
View 4 Replies
View Related
Dec 18, 2010
I just added a ssl vhost.php files are not running on it, they just get downloaded when I click them. All my non-ssl vhosts were added by the admin software of my hosting company, but I had to manually add the vhost entry for my ssl vhost.Here is the entry I added for my ssl vhost:
Code:
<VirtualHost www.vhost.com:443>
DocumentRoot "/var/www/vhosts/vhost.com/httpsdocs"
[code]....
View 1 Replies
View Related
Mar 17, 2011
I am trying to add a second vhost to my once working apache config. Now I have things really bollixed up and cannot access anything. I am getting a error 400. The access log shows this:
192.168.0.2 - - [17/Mar/2011:11:24:41 -0400] "GET /" 400 951
192.168.0.2 - - [17/Mar/2011:11:24:41 -0400] "GET /" 400 951 "-" "-"
I have a default (I think) httpd.conf file and put all my config stuff in files in vhosts.d. I have 3 files there:
[Code]...
View 14 Replies
View Related
Jan 23, 2010
During a request of a VPS, the provider asks me for a hostname and for the VPS I have requested which will run on a Debian. I entered 'dryaf' as hostname. What I want to do with this VPS is to point a website to its IP. I learn that I can create a vhost and configure VPS to redirect each domain name to its folder using vhost but I didn't learn any importance for hostname I don't think it should be mandatory localhost or has the form domain1.com so during request I just tipped dryaf for the hostname of the VPS. Should the hostname follows a special rule for giving it a name or no?
View 6 Replies
View Related
Aug 23, 2009
I'v multi v-host . need to make each V-Host work under separate user (not apache user).
There is one module/patch call " mpm-itk " . In Debian/Ubuntu every thing is sweet
just do
apt-get install apache2-mpm-prefork libapache2-mod-php5 or aptitude install apache2-mpm-itk
that is all
But in CentOS 5.3 , there is always some difficult different (Why ? I do not know)
Kindly, Look to this solutions : [URL]
Is there possibility to avoid this complications ?
- I need solution without compiling + patching the apache , Is this possible ?
View 1 Replies
View Related
Jan 6, 2010
Here my setup of Apache :
I have two virtual hosts on separate IP and on both I am using port :80 one is main website domain.name and another webmail.domain.name. And to get full link path I am using index.html with redirection derectives. My question how I can setup each Vhost to he is own redirection directive to set two full link like:
when type webmail.domainname -----> redirect to webmail.domainname/horde/imp/file.php
and www.domainname ------> redirect to www.domainname/csr/
Right now working only one of this Vhosts, just problem to separate them when I type www.domainname -----> apache redirect to webmail.domainname.
index.html
<html>
<head>
<title>WebSite</title>
<meta http-equiv="REFRESH" content="1;url=http://www.domainname/csr/"></HEAD>
<BODY>REDIRECTION</BODY>
</HTML> .....
View 8 Replies
View Related
Apr 14, 2010
I have looked around a while for the answer, but nothing really fits. Here is the scenario. I have one server and a few openvz VE's running. I want to be able to auth whatever possible with LDAP. I have an LDAP server setup on the host and auth works for the server users. The tricky part for me is that every VE has their own domain. and if I can do that, they will also have the same login for their VE on said domain. I can setup users and the required software on the hosts and guest, but I guess I am confused at how to manage the multiple domain part of things.
not sure if proftp can do 'name based' stuff like apache, but if it can, we can point ftp.clientdomain.foo to the main server and handle it that way.
View 1 Replies
View Related
Oct 13, 2010
I have question about the UNIX sockets. my goal is to connect multiple sockets from a single client to a single server and keep them open...I'm not sure if that is possible to create or not. Do you have any suggestion or an example of code?
View 1 Replies
View Related
Apr 21, 2010
I am writing an application that uses POSIX thread. I am spawning a threads and threads performs task in infinite loop .I have another monitor which monitors the activities of these threads. Due to some reason I have to kill one thread from monitor thread. so I use pthread_cancel() . It terminates thread however it throws exception. I searched about the exception on internet and i am able to catch the exception and handle it as well . However the exception is not thrown every time . I wanted to know under what circumstances it throws exception. Accordingly I have to write cleanup handler
View 1 Replies
View Related
Mar 10, 2011
I am wanting to throw a splash image on shutdown. How do I do it ? I am using CentOS 5
View 8 Replies
View Related
Jan 19, 2011
Does an ISP have to throw away all their old routers if they're trying to upgrade to IPv6?
View 1 Replies
View Related
Dec 7, 2010
I have a Macbook 2,1 since 2007. Last week my hard drive just died, so I decided to replace it with a new one, no problems with that. The problem came when I had to install an operative system, because my DVD drive has been broken for a year and a half now. I know we can easily install MacOSX from an external usb drive, but I don't have a big enough pendrive at the moment. So I went for Ubuntu. I have managed to get an Ubuntu 10.10 live usb stick working like charm, if anyone is interested. I just downloaded the latest i386 iso and followed this advice by pxwpxw for the 32bit EFI.
The only thing I had to change in the boot.cfg was the name of the iso and -very important- changed initrd.gz for initrd.lz. The live usb works great. But I decided to do an installation on the hard drive. I installed it using the whole hard drive and didn't get any errors. But when I boot the macbook it doesn't detect anything. I guess I need an EFI bootloader or something to make it work. I've tried to follow this guide but it seems to be intended for someone who already has MacOSX and the Ubuntu installation working. I just want to install a bootloader or whatever I need from the "outside" (from the live usb I'm using). I tried to just throw reFit into the main hard drive's root folder but it doesn't work. I think that maybe creating an HFS+ partition and installing reFit in it may work, but I don't think I can create that kind of partition from the Ubuntu usb and I also need a working MacOSX to run the enable.sh. I've also read of elilo but I've seen that it hasn't been updated for 3 years
View 4 Replies
View Related
Apr 25, 2011
Is it possible to using 2 envelope options on fetchmail? Here is fetchmailrc configuration :
envelope "Envelope-To"
envelope "X-Apparently-To"
View 1 Replies
View Related
May 28, 2010
In my production setup, i have 3 servers using the same mount point. However, i see that the IOPS is low. Does this kind of architecture have any impact on IOPS. In case it is neutral, how can i tune my setup for better IOPS.
View 1 Replies
View Related
Feb 10, 2010
I have a requirement of using a wildcard certificate for 5 subdomains running under apache httpd server and 1 subdomain under tomcat.Is there any possibility of using the single wildcard certificate both in tomcat and apache
View 3 Replies
View Related
May 28, 2010
I am running single drive Ubuntu server 9.10 with a lot of software. Now I want to add one more disk (same size and type) and to convert this to RAID 0 without need of reinsallation. Is it possible and if yes how? I didn't find nothing for RAID 0. It sounds simple, but probably is not.
View 4 Replies
View Related
Mar 4, 2010
Does anybody have any documentation or can assist with any sort of steps on how to install a SSO server on Centos 5.4.We have just over 150 Centos servers country wide and we would like to implement an SSO server to manage the users and their login credentials locally and centrally.
View 1 Replies
View Related
Mar 19, 2010
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies
View Related
Sep 23, 2015
I run a small shellserver for my friends, and added a few IP's for vhosts. I tried google, but found nothing so I wonder if vhost listing script for IPv4 and IPv6?
View 1 Replies
View Related
Apr 15, 2010
I got my VPS last day and i deside to setup everything myself, but i just came to virtualhost in apache when i got stuck.
i have Ubuntu Server 9.10 whit Apache2
Let me begin to show my config files.
ports.conf
Code:
#NameVirtualHost *:80
Listen 80
<IfModule mod_ssl.c>
# SSL name based virtual hosts are not yet supported, therefore no
# NameVirtualHost statement here
[Code]....
View 2 Replies
View Related
Jun 25, 2010
After Ubuntu autoupgraded my Apache, some VHosts are nor working anymore and PHP Code is not oarsed any longer. I think the apache2.conf was overwritten. I do not have a clue how ti fix that, I tried some things but now I am stuck. I have only three hosts: the default, an svn (over port 443) and one called "imcar" which has PHP scripts to be parsed.
So, in my apache2.conf I have this:
Code:
DocumentRoot /var/www
ServerName localhost
The imcar host is set up like this:
Code:
<VirtualHost *:80>
ServerName imcar
ServerAdmin webmaster@imcar
DocumentRoot /var/www/imcar
<Directory /var/www/imcar>
Options FollowSymLinks Indexes
AllowOverride None
Order allow,deny
allow from all
</Directory>
ErrorLog /var/log/apache2/imcar-error.log
LogLevel warn
CustomLog /var/log/apache2/access.log combined
ServerSignature On
</VirtualHost>
If I go to imcar in the browser, the default DocumentRoot is shown. If I remove the default DocumentRoot, I get a 404 on imcar.
View 8 Replies
View Related
Jul 21, 2010
I read that since httpd 2.2.12 (I run 2.2.15), it is now possible to run multiple SSL certs on multiple vhosts on one ip. I didn't find a procedure to do it. Do you know how to?
View 1 Replies
View Related
Mar 18, 2011
I would like to set up apache so that:
[code]....
Is it possible with only 1 IP or do i need 2 IPs? I have tried several configurations, but they always seem to lead to a dead end with either the IP-site or the domain-sites not working. There has to be a right way to do this.
View 3 Replies
View Related
Jul 15, 2010
I'm setting up a server on Ubuntu 10.04 for development. It all seems to work nicely, I just have one thing that's bugging me. I have a project in /var/www/portfolio, which is as you may guess my portfolio. Instead of the link http://localhost/portfolio I'd like to use http://portfolio.nl. So I set up a file 'portfolio.nl' under sites-available and a symlink on sites-enabled containing this: To get this to work on my local machine I set up this in /etc/hosts:
[Code]...
View 2 Replies
View Related
Mar 22, 2010
I'm working on an ADSL2 connection that connects via PPPoE and it is assigned a static IP. On top of the static, the ISP has assigned a small block of 6 useable IP addresses.
- The primary static IP is on the interface ppp0
- The other 6 IPs are configured as eth0:1, eth0:2, eth0:3 etc.
With the above setup all IPs are reachable and useable on the internet.
- The revers DNS has been updated for a few of these and resolves with no problems. ie: eth0:1 has the 123.123.123.123 IP and resolves to blah.host.com and blah.host.com resolves to the IP address.
- To test this I have tried a program like BNC to bind to the IP address on eth0:1 but for some reason when connecting externally the host address is coming up with the FQDN on ppp0 interface IP, not the vhost IP.
Questions is, is this the normal behaviour since its a PPPoE connection and would only work if the ISP supported a bridged connection? something on the ISP end not allowing this to work?
View 1 Replies
View Related
Mar 4, 2011
I have some vhosts set up, and they work once apache is restarted. But, as a few minutes go by, all the vhosts end up going to the default apache "It Works!" page.
I don't think it's the vhost config since it does work initially (and I've triple checked it all by now).
I am running htcache (or whatever the disk caching module is called).
View 3 Replies
View Related
