Over the past few months Nomachine's NX Server has deteriorated to the point where it's unusable, as detailed in this thread for one machine. On my other machine it works, but I cannot do apt-get dist-upgrades as it spews forth messages like, "insserv: Starting nxsensor depends on stop-bootlogd and therefore on system facility `$all' which can not be true!". So I give up on them.
View 1 RepliesOver the past few months Nomachine's NX Server has deteriorated to the point where it's unusable, as detailed in this thread for one machine. On my other machine it works, but I cannot do apt-get dist-upgrades as it spews forth messages like, "insserv: Starting nxsensor depends on stop-bootlogd and therefore on system facility `$all' which can not be true!".So I give up on them.
View 2 Replies View RelatedI have nx nomachine installed on 64bit opensuse 11.2. All was fine until I ran updates this week and now it seems that it has a mind of its own. (dont remember which packages were updates)Every time I open the cli it just starts typing the equal symbol on its own. In fact every time I open anything that can accept text input it just starts adding equal symbols. It enters them about 2 every second.Code:jason@FileServer:~> =========================I uninstalled all the NX packages, killed the .nx folder in my user folder and then reinstalled the packages and still the same thing.
View 5 Replies View RelatedI'm logging into a remote Ubuntu box from my Mac via NX, and almost everything works great. However, I can't find any way to capture the alt-tab keyboard combination (or, command-tab) for app switching. All the individual keys register with ubuntu, but when pressed together, Mac OS captures it first. Is there any way to fix this?
View 2 Replies View RelatedI use Fedora 12 and newest free NoMachine NXServer. I have installed all three packages (nxclient, nxnode and nxserver). I'm running sshd on port 22. When I try to connect to my machine, everything works fine, then
I see big red M and then is all black.
NX works great when only one connection is attempted at a time. Each server responds appropriately. However when attempting to use NoMachine from an XP client for multiple nx remote connections all subsequent connections receive the following error:Session failed - NX Server Error is 112 'Address already in use'.Research indicates numerous discussions (see below) with no solution for the current freenx versionEnvironment:VM Platform default Fedora 13 with KVMVM machines all default Fedora 14 with "yum install freenx"Full Text of Error Message:
Info: Display running with pid '2336' and handler '0x17040e'.
NXPROXY - Version 3.4.0
Copyright (C) 2001, 2010 NoMachine.
[code]....
Opensuse 11.3 here is my configuration files :
/etc/sysconfig/apache2 :
APACHE_CONF_INCLUDE_FILES="/etc/apache2/httpd.conf.local"
Note : Doing this way ( recommanded by apache documentation ) I don't know if it is the good way as recommended by NOMACHINE documentation : <<It can be updated by adding the following directive before the "Global Environment" section >>
[Code].....
The problem is that I have three PCs two with opensuse 11.4 and one with windows xp both linux machines have installed nxserver for remote control and the xp machine has nxclient, I can connect to both linux machines with the windows client, but when I try with the linux client to the other it outputs the following error:
[code]...I changed the ssh port to 2222. this is the nx software from nomachine the client version is 3.5.0-6
So I don't know exactly if this is where to put this. Because I think this might be NoMachine's problem, but I'm not sure. I am trying to set up FreeNX, and I got it working to connect from my work laptop (windows 7) to my home computer (ubuntu 10.04).
I have it going on a different SSH port, and it claims I'm using custom Keys. But, NoMachine still requires me to put in a password to connect. But I can't do that because I have my ssh setup to key-authentication ONLY.So I can't connect to my home machine UNLESS I turn on password-authentication also. But I don't want password authentication on. So, how can I connect without using passwords? Do I need to use a different client other than NoMachine NX-client? Or is this a setup I have wrong in my ubuntu stuff.
I figure it must be NoMachine, because I can't even attempt to login if I don't first put in a password.
I have an Ubuntu jaunty fileserver. I connect to the machine from time to time using the Nomachine client on windows.Everything is setup and working perfectly, except for one thing. When I acces the server remotely, I cannot access any external USB drives connected to it. The drive mounts fine, and is available when logged on locally to the machine, just not when logged in via Nomachine.
View 4 Replies View RelatedI have a remote Lucid machine running Neatx to which I can successfully connect using the NoMachine nxclient under Windows. Using the same connection credentials under Karmic and nxclient doesn't work.
I attach screen shots of the session logs under both Windows and Karmic. They appear identical except for the 'Using shared memory parameters' field. Is this important? No authentication errors appear, so I don't think that's the problem. The Karmic session displays 'Established the display connection' and then fails after exactly one minute.
I'm trying to restrict command line ssh and yet keep NoMachine working, so I followed this post [URL]... and tried adding this to /etc/ssh/sshd_config:
AllowUsers nx@*.*.*.* paul@*.*.*.* *@::ffff:127.0.0.1 *@127.0.0.1
On restarting the ssh daemon other users can't login by the terminal, but I can. However, NoMachine won't log me in. I get: NX> 502 ERROR: Public key authentication failed. As a server side check:
[code]...
I have installed NoMachine NxClient deb, on Ubuntu 11.04, Nx installed and I connected to my uni server fine. The Nx program was originally in the applications drop down menu in "others". After a restart Nx was no longer in the menu, I dl'd again and found in Ubuntu software center that there was an option to reinstall NXClient, so I reinstalled and the icons appeared in applications/internet. After a restart they(the NX icons) disappeared again.No other programs have disappeared from the app menu like that.edit: after finding edit menu, I noticed nx client (show) was not "ticked" in internet selection. after a reboot the icon is now available in the app/internet menu.Previous to this I found what I thought was the application in shell $/usr/NX/bin/nxclientbut it would not run from shell command.I added to the panel, created an application launcher for /usr/NX/bin/nxclient and it works there, too.
View 2 Replies View RelatedI have installed nomachine on my windows 7 laptop and when I connect to the server I receive the error message:
"Authentication failed for user [username]"
Which user am I supposed to log in with? Is it the same user as I use on the server or is this a separate nx user? When I receive this message is it because of the user or the ssh key I use?
I want to use nomachine, instead of freenx, and well it isn't working. SSH server works and all, because freenx works., same for neatx. But I hear with nomachine you can see the main display of the computer? Is this true? Well one way to find out, but whenever I try to login I get: Authentication failed for user x. I don't know why, neatx and freenx worked, even x2go, but not this.
View 1 Replies View RelatedI've installed the latest no machine rpms from nomachine. Status shows that nx server is running:
Code:
However, connecting from a windows client, I get the following:
Code:
So I get past authentication, but it then times out during session download. And here's the output from /var/log/messages on the server:
Code:
The only strange thing I've noticed (other than the error messages) is that the log messages for NXServer/NXnode have a date of Jan 5, yet the correct system time should be Jan 4 as seen in the first message.
Note this is happening on both my RHEL 4 and RHEL 5 machines.
i was able to connect the first time following the instructions here: [URL]
1. first time i was able to connect i used the nx client for Mac OS X. I logged off.
2. then i decided to test this using Windows nx client and i got:
NX> 203 NXSSH running with pid: 604
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
[Code]...
I have done a basic installation for a server.And then I have removed the screen and the keyboard because I have no place for them.I manage the server from my laptop using NX.I am using the root user account as nx user because I can't stop the server with a normal user.
View 4 Replies View RelatedWhen I connect to my Ubuntu box from any Mac OSX 10.6 client (Snow Leopard) using Nomachine, the 'd' key minimizes all windows on my Ubuntu box. I found another post here that says the issue can be fixed by changing some settings on the Ubuntu box when connected. However, I cannot find the location of the settings indicated in that post [URL].
Does anyone know how to resolve this 'd' key problem?
This thread (nxserver now broken?) has inspired me to install FreeNX and the client from nomachine on openSUSE-11.2 (this is the version used on both, server and client machine). The good news is: basically it works. I can connect and get the desktop. However, I have some trouble with the keyboard. Up and Down arrow keys do not work. The up arrow triggers a screen snapshot. The down arrow key does nothing. I tried to connect using qtnx as well. This does not work. Result is:
[code]...
I'm using Nomachine NX client for Windows to remotely connect to my Ubuntu.Every now and then I experience a strange phenomena: the text in the prompt of all open terminal windows becomes black, so it can't be viewed over the black background. Typed commands are also black, but the results are in normal colors. So I can run stuff, but can't see what I'm typing...After I close all open terminal windows and start a new terminal window, everything goes back to normal.
View 1 Replies View RelatedI am not exactly newbie with GNU/Linux, but definitely new to SSH/NX stuffs. I followed the below tutorials for installing FreeNX so that I can access my desktop like TeamViewer in windows.
https:[url]....
https:[url].....
But I don't see the folder NX like the one mentioned here.Then edit the file /usr/NX/etc/server.cfg
I don't see a folder called NX to proceed. Also when I use nomachine client to connect from Windows, it couldn't connect and I get the below errors.
nxssh: <host-name>: no address associated with name.
how to make connect to freenx server from windows using nomachine client?
I have been spending hours and hours trying to find a "Remote installation for Dummies" ....kind of step-by-step approach. But after several evenings googling and reading. This is how far I got: I have installed FeeNX on my server and after sudo nxserver -- status I get a reply like this:
NX> 100 NXSERVER - Version 2.1.0-72 OS (GPL. using backend: 3.4.0)
NX> 110 NX Server is running
NX> 999 Bye
so to me that looks like the server process is running. I also installed the windows Nomachine on my laptop and hooked it all up in my local network (so no routers whatsoever) I disabled the firewalls on both my laptop and my server. just in case configured the client for port 22 and the fixed IP address of my server. even imported the users.id_dsa.pub key in the client. long story short: I only get that annoying little error window from Nomachine saying: "Cannot initialize the display service"
Fedora 11, new install from live cd newest nomachine free server and client for linux fedora server to fedora/windows clients connection. I cant use most superuser programs in gnome, when logging in with nomachine. I can start a program like "add/remove software" and search for the software and get results. It can search for dependencies, but when i push "install", the "files that will be installed" window just closes, and I get back to the main window. Nothing gets installed.
This is the behavior in most such programs. I kind of get the feeling that these programs are either ignoring su actions, or trying to display the "autorization request" or password window locally. Also, when selinux stops something, and i get a star up in the right corner, I can't "show" the message. It just closes the bubble and goes on with its business. I just installed fedora over ubuntu. Ubuntu behaved like i wanted it to in this regard, giving me the power to install and change stuff, and displaying the password request every time it felt the need to. I don't want to go back to ubuntu.
I can ofc ssh into the server, and use yum and such. But i don't want to if i can get away with it. I don't care about the security issue. I have a fairly good fw/router and only one idiot user (me), and he can blame himself when his surfing lets the bad guys inside. So, what i want is to do administrative tasks via nomachine.
I'm an undergraduate Physics student, and I would like to install a software for helping me with relatively simple tasks, such as calculating integrals, plotting graphs and performing some general numerical calculations. Can someone indicate me a good software for these purposes, preferably an official Debian package?
View 11 Replies View Relatedis there any recommended Ark alternative for KDE?I really don't like that program.
View 6 Replies View RelatedI have used TurboTax online for several years to do my return....this year they are refusing Firefox running on a Linux OS!Anyone know of an alternative that is Linux friendly?
View 9 Replies View RelatedDoes any know of an alternative???
View 4 Replies View RelatedDoes any of an alternative to Gwibber that can connect with Facebook and do what Gwibber claims it can do.
View 6 Replies View Relatedi've been searching for GTD app alternative to OmniFocus but till now i couldn't find any REAL apps that's use the real methodology of GTD don't answer me with one of those apps 'cause i've tried them and they are either ugly or poor or both
-thinkingRock
-Doitnow
-Get Things Gnome
- Tracks