I am able to list the domain users by wbinfo -u but when i try to authenticate it is giving the following error: PAM: user 'test' - not authenticated: User not known to the underlying authentication module
The user in AD (active directory)
Using Wicd and it keeps dropping out or telling me "bad password" when the password is in fact correct. I even know it works because the first couple of times it worked, but the connection wasn't sustained for more than a few seconds each time. My reasoning is my wireless is functional in Ubuntu, there's no reason it shouldn't be in Debian. Wireless network card is ASUS PCE-N13. Ralink driver is installed. WPA-supplicant is installed. Gnome Network Manager is also present, though I've heard that it doesn't support my particular situation.
View 5 Replies View RelatedI want to configure SSH key-based authentication and SSH password Authentication in same machine for different user .
View 1 Replies View RelatedOn Ubuntu server 10.10, with a relay smtp server with authentication via postfix; I keep getting 535: Incorrect authentication data. I'm sure my username and password is correct. Heres how I set up postfix: I created a file called smarthosts.conf in my /etc/postfix/ directory that contains the following:
[Code].....
my server uses plain text authentication on port 25. I would like to use security like SSL, but this particular server is unsecured.
If I am running a script, let's say a install script. Is there a way to make Su repeat authentication rather then just returning "Authentication failed" and continuing the script?
View 3 Replies View RelatedI need to make a choice on what authentication protocol I want to use for Authentication and Authorization. I was looking at Radius and then literature suggested that Diameter was a better protocol. Keep in mind I need this on a hetrogeneous setup ( linux & windows together). Diameter seemed like a good fit until I discovered that the open source code no longer seems to be maintained ( C/C++).
I was also looking at Kerberos as an option though there is alot overhead with the server. SSL/TLS or EAP? I am looking for simple but secure and am new at the security protocols.
I have a problem with ldap client authentication in ubuntu. I am using rhel5 as openldap server and I configured ubuntu as client, when I am trying to login the following message is coming."su: Authentication service cannot retrieve authentication info. Sorry"
But when I do search through "ldapsearch" command output is coming without any errors, Can anybody explain what would be problem.
I have a network and am using squid proxy with authentication I want to create another subnet without authentication.
View 1 Replies View RelatedI am trying to install a printer driver on an amd64 that was designed for 32bit only (of course)Squeeze automaticallty installed the ia32_libs package, but it may not be enough.How can I tell which library is failing?I do get an error on libcupsimage.so.2 but it does exist in /usr/lib/libcupsimage.so.2
View 4 Replies View RelatedI am new here and Fedora. Currently running Fedora 12 and recieved kernel crashes to which error report shows failure with IPv6.
I have disabled Ipv6 in /etc/sysconfig/network, blacklisted and stop these services.
However why is my Ipv6 failing?
After installing QtCurve 1.8-41 from software.opensuse (I've been playing around with themes), whenever I try to boot my computer, it gets to stage 1 of loading (the less colorful splash screen), and about halfway through loading that, the screen goes black and a box in the top left corner says: "Could not start kdeinit4. Check your installation". I'm then taken to failsafe, where I login. When I try to run kdeinit4 from the command line, I get this error:
kdeinit 4: symbol lookup error: /usr/lib/libQtSvg.so.4: undefined symbol: _ZN14QObjectPrivate15checkWindowRoleEv.
I've tried uninstalling through zypper, but it can never find the package I specify. I'm on 11.3.
recently logging in become a bit unreliable - i thought i was mis-typing the passwords but on closer looking the passwords were ok (faulty passwords produces "authentication failure) Using the correct passwords the screen blanks for a second and then returns to the list of possible logins. I cannot log in except as one of the children - could this be because their logins have been used less often and less recently Everything was working well and I have not knowingly changed anything except the passwords after the problems started in order to solve what i thought was a simple mis-typing problem
I can log in as the children but their logins obviously do not have permission to do much
I also have a bootable puppy CD Unfortunately I am also a total noob but determined not to backslide into XP because up to now Ubuntu has been fantastic
I am attempting to install Ubuntu 64-bit and it keeps failing. This is my first 64-bit system, and have not had problems with installing x86 Ubuntu in the past. When the full install failed, I tried installing it within Windows and that also failed. I've attached the log from that attempt in this post (had to trim it down to fit the file limit though). I don't know if these are the same errors I was getting on full install as I didn't write those errors down...I can try again and post them if needed though.
View 4 Replies View RelatedSo I downloaded 10.10 x86 ISO, MD5'd it and it all looks okay. I am using a decent LITEon DVD-RW drive (no errors before with ISOs) and using DeepBurner (also no errors before) and it keeps failing at 88% :
View 9 Replies View RelatedI am trying to run finch on fedora6. Finch is exiting immediately on starting and i am not able to add any account using it. correct procedure to use finch.
View 5 Replies View RelatedHDA1 is going to die, SMART says its well beyond dead, and I can tell the read/write times have gone up drastically.
I know I can use dd to copy it from a live CD.
1.) If I dd it to something.img, is there a way for me to "work" on the backup copy? Basically, I need to backup ASAP, but won't have a replacement drive for a while, so I'll need to be able to put the changes into the backup.
2.) When it comes time to restore, if I dd it to a larger drive, is there a way to take advantage of all the extra space? I assume I can dd it over and the MBR & Partition Table will go with, so I can use something like gparted to grow the partition to the drive size?
Or is there a better way to make a backup?
I have just upgraded to Ubuntu 10.04 and need to setup VPN connections to clients.
After configuring one of the vpn connections, I tried to connect but the connection fails with no specific errors.
Looking at the /var/log/messages file I get the entries as follows:
ay 20 13:52:28 machielr-laptop pppd[3362]: Plugin /usr/lib/pppd/2.4.5//nm-pptp-pppd-plugin.so loaded.
May 20 13:52:28 machielr-laptop pppd[3362]: pppd 2.4.5 started by root, uid 0
May 20 13:52:28 machielr-laptop pppd[3362]: Using interface ppp0
[Code]....
i installed fedora 11 linux in my computer.but after successfull installation,i see that a message near the taskbar that "A hard is failing". what is that suppose to mean?
View 1 Replies View RelatedI have a strange problem with a simple program. I have a container class that holds a pointer. I did this so I could use another container class that does several pass by value calls. I didn't want to be copying the object over and over again, so decided to build this simple container that simply copied the pointer in the copy constructor.
However, the pass by value call seems to be failing in a strange way. When the pass-by-value function is called, the program jumps into the copy constructor just fine and performs the pointer assignment operation. The program will copy the pointer value 0x20 (for argument sake) to the "this->base" location. Within the copy constructor, this has the address 0x28. Then when it jumps into the function, instead of pass by value argument being at 0x28 (as expected), it is at 0x36. Then 0x36->base has the address 0x28. Thus the base is now pointing at what was the new pointer container. At this point the data is corrupted and random things happen.
It seems that there is some strange assignment and double nesting going on. I really do not understand what is going on.
Below is some code. I have stripped away all the other code trying to isolate the problem. I have added comments explaining what my debugger is telling me.
Code:
using namespace std;
class paramPnt // Need to determine how order is tracked
{
private:
long order;
[Code].....
I fallowed the directions on How to Setup a VPN (PPTP) Server on Debian Linux and How to Setup a Split Tunnel VPN (PPTP) Client on Ubuntu 10.04 to set up a LAN vpn, but it keeps on failing to connect. Can it do a LAN VPN? What else can I install that has an easy setup.
View 6 Replies View RelatedI've had a problem trying to hibernate, sleep doesn't work either, when I try it starts to hibernate but then the screen flashes and when I move the mouse I'm returned to my current X session. I see the following in dmesg
PM: Device usb10 failed to freeze: error -2
[ 682.481822] sd 0:0:0:0: [sda] Starting disk
[ 682.798713] Restarting tasks ... done.
Apparently this notation points to a USB root hub, I have a USB 3 capable MB and I saw few mailing lists suggesting this was a bug but I can't find a fix, anyone out there resolved this?
cat /proc/version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP
When I go to Administration->Preferences->Appearance, the window pops up for a split second and is then gone. Attempting to open it again yields the same result. I have never had this issue before and haven't changed anything recently that I recall.
View 8 Replies View RelatedI have recently decided to rebuild my fedora install and have had several problems installing the updates to the system. I am receiving the following error:
libcdio.so.12 is needed by package gstreamer-plugins-ugly-0.10.14-1.fc13.i686 (rpmfusion-free-rawhide)
libcdio.so.12(CDIO_12) is needed by package gstreamer-plugins-ugly-0.10.14-1.fc13.i686 (rpmfusion-free-rawhide)
[code]....
I am more familiar with using sources.list in debian style distros but I am unsure how to proceed with /etc/yum/repos.d. I am currently attempting to either install them from the CLI or to download the binaries, but I do not think that will fix the problem in my repository lists.
The HD containing my main F14 install is suddenly failing with many unreadable blocks. So I booted a different F14 installation I have on another disk.
Then I run dump, for example, as following:
Code:
dump -0 -a -q -v -A sdb1_home.arc -f sdb1_home.dmp -L F14_sdb1_home /dev/sdb1
as, for what I can recall, I've often done to create full backups.
The problem is that running restore with this command:
Code:
restore -i -A sdb1_home.arc -f sdb1_home.dmp
(as, for whatI can...) and using the add and extract commands, only the directory are created. But files are listed using ls. If I add just a file, only dirname is extracted.
So apparently the GNU c++ compiler did not install when I did:
# yum install gcc
And now it's failing to install the C++ compiler when I do:
# yum install gcc-c++
It's saying it's running out of mirrors to check or something? Does anyone know what else I can do to install it?
After installing openSUSE 11.3 (retaining my old /home) and attempting to upgrade to KDE 4.5, failing to get KDE to run, downgrading to 4.4 I've now got nothing in the KDE Application menu.
[Code]...
I have installed opensuse 11.4 64 bit on a dell optiplex 755 with 4 gigs of RAM. Everything seems to be functioning but when I try to install new apps through YAST or zypper, it starts to download the package and it's dependencies, but you see it quickly slow down on the download speed until it gets to nothing, and I get the Abort,Retry prompt. The internet connection is fine. I can install apps from the DVD medium.
View 3 Replies View RelatedI'm using k3b to rip an audio CD and save it on my computer. It fails with:
Code:
Devices
-----------------------
LITE-ON DVDRW SOHW-1633S BPSA (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite] [%7]
System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.4.4 (KDE 4.4.4) "release 3"
QT Version: 4.6.3
Kernel: 2.6.34.8-0.2-default
NOTE: It only fails with mp3, ogg works (but I can't use ogg because my player doesn't understand that format).
File in question is [URL].. meder@pc:~$ tar -xvjf wkhtmltopdf-0.10.0_rc2-static-i386.tar.bz2 bzip2: (stdin) is not a bzip2 file. tar: Child returned status 2 tar: Error exit delayed from previous errors
I tried to unzip it as well, and I tried a various slew of commands to no avail on my Debian box which has no GUI. I downloaded this on my local desktop ( Ubuntu ) and was able to easily extract w/ my mouse so I'm not exactly sure what the extractor did differently...
My router has a firewall up and running as standard. I have installed Firestarter and can see a number of pings on the firewall
[code]...
Does this mean that my hardware firewall is failing in its job?