So I downloaded 10.10 x86 ISO, MD5'd it and it all looks okay. I am using a decent LITEon DVD-RW drive (no errors before with ISOs) and using DeepBurner (also no errors before) and it keeps failing at 88% :
View 9 RepliesThe Windows Disc Image Burner, after attempting to burn the ISO file, will prompt me that the burn was unsuccessful. It then gives me the error code of 0x80004005. I've re-downloaded the file twice and attempted to burn it twice, but to the same results. A
View 3 Replies View RelatedI'm having troubles with brasero 2.30.3 running on sid, it fails to burn iso. I've tried 3 cds and still getting error:
View 3 Replies View RelatedI want to burn a mp3 cd but brasero can't burn mp3 cd. How can I do this. If any further software need burn mp3 cd
View 3 Replies View Relatedrecently logging in become a bit unreliable - i thought i was mis-typing the passwords but on closer looking the passwords were ok (faulty passwords produces "authentication failure) Using the correct passwords the screen blanks for a second and then returns to the list of possible logins. I cannot log in except as one of the children - could this be because their logins have been used less often and less recently Everything was working well and I have not knowingly changed anything except the passwords after the problems started in order to solve what i thought was a simple mis-typing problem
I can log in as the children but their logins obviously do not have permission to do much
I also have a bootable puppy CD Unfortunately I am also a total noob but determined not to backslide into XP because up to now Ubuntu has been fantastic
I am attempting to install Ubuntu 64-bit and it keeps failing. This is my first 64-bit system, and have not had problems with installing x86 Ubuntu in the past. When the full install failed, I tried installing it within Windows and that also failed. I've attached the log from that attempt in this post (had to trim it down to fit the file limit though). I don't know if these are the same errors I was getting on full install as I didn't write those errors down...I can try again and post them if needed though.
View 4 Replies View RelatedI have just upgraded to Ubuntu 10.04 and need to setup VPN connections to clients.
After configuring one of the vpn connections, I tried to connect but the connection fails with no specific errors.
Looking at the /var/log/messages file I get the entries as follows:
ay 20 13:52:28 machielr-laptop pppd[3362]: Plugin /usr/lib/pppd/2.4.5//nm-pptp-pppd-plugin.so loaded.
May 20 13:52:28 machielr-laptop pppd[3362]: pppd 2.4.5 started by root, uid 0
May 20 13:52:28 machielr-laptop pppd[3362]: Using interface ppp0
[Code]....
I fallowed the directions on How to Setup a VPN (PPTP) Server on Debian Linux and How to Setup a Split Tunnel VPN (PPTP) Client on Ubuntu 10.04 to set up a LAN vpn, but it keeps on failing to connect. Can it do a LAN VPN? What else can I install that has an easy setup.
View 6 Replies View RelatedMy router has a firewall up and running as standard. I have installed Firestarter and can see a number of pings on the firewall
[code]...
Does this mean that my hardware firewall is failing in its job?
I have been FRUSTRATINGLY trying to upgrade to 10.04 because I was impressed with it, however, as I have predicted, it was a headache. In all actuality, it is WORSE than a headache. Both my desktop and laptop are now decommissioned, (I have Windows 7 on the 2nd laptop, and since Ubuntu/GRUB hasn't installed completely, it won't boot--I have to fix that TOO) leaving me to depend on an old Pentium III in the closet to download and burn CD images, which is STILL failing. Unfortunately, I have burned 9.10 on a rewritable CD, which I erased long ago. I have NO computer now, other than the old Pentium III which was sitting in a closet. I am tired and want to go to sleep, but I am the kind of person who finishes things that were started.
My problem is that I have downloaded (and burned to a CD) Ubuntu 10.04 TWICE, because it's failed to install. I thought that the ISO was corrupted, so I downloaded it and installed it AGAIN. Same thing. I tried making a Live USB Flashdrive install--same old, same old. It's 12:00 MIDNIGHT (Pacific time) and I can't bear to stay up this long like some of you young ones can. Thank goodness for caffeine
I KNEW that I shouldn't have done this, but I went ahead and proceeded to "upgrade". Well, the actual upgrade (thru Ubuntu Update tool) failed, so I decided to do a clean install. Thought that the process, from start to finish, would take 30-40 minutes, but was I wrong! I have been stuck with this issue since 7 P.M.!
Well, to cut to the chase, is anyone else having issues with burning/installing from their own CDs? This Pentium III is only running Fedora Core 6 with 512MB of memory, so it can get a download/burn job done OK. I am using the K3b burner in Fedora and no errors regarding a corrupted ISO appear. Why then, won't it install, after downloading and burning two separate ISOs?
I have created a VPN through network manager to a Windows 2003 server.
However when I try connecting it fails every time, I have tested with a windows XP client and this works so this would indicate I am doing something wrong in the network manager configuration.
I try to install virtualbox through software center, but it just doesn't install.
Code:
installArchives() failed: Selecting previously deselected package virtualbox-ose.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
[Code]....
extract some data off a failing drive the other day. I plugged it in, but got no response in windows or linux (partition is ntfs), but it does appear in the bios and /dev (though the hdd hung most linux liveCDs except rescue remix 9.04). I tried to analyze the drive, and found good smart data, so I figured there were just a few bad blocks in critical places. I ran spinrite against it in level 2 mode. the process crawled (40MB after 2 hours) and it updated the smart data to reflect many many reallocated sectors, putting the drive into a failing state as far as smart is concerned. so, now, in a last ditch effort I am turning to ddrescue to try to get an image of the drive. it's been running about 17 hours now, and has done several complete passes through "Splitting error areas".
here is my current output:
Code:
Disk /dev/sdb: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
have I done all I can? can I in good conscious declare this a lost cause? I do have an image from a prior run of ddrescue, with 826 MB of data.
edit: I resumed the task from log, and now it is reporting the err size as 9223 PB. since the drive is a 320GB, I find that a bit odd.
Trying to upgrade from 10.10 to 11.04 but it keeps giving me errors... such as:
An unresolvable problem occurred while calculating the upgrade.
Please report this bug against the 'update-manager' package and include the following error message:
I've attached a gzipped copy of my dist-upgrade folder, anybody have any ideas what's going on?
I installed the latest Ubuntu last night and have some issues with Unity. Firstly, when I open Deluge (which I've been using for about a year now) and click to close it, I can't seem to reopen it. Usually when I clicked the close button it didn't close Deluge, it merely moved it to the background.Secondly, when I open some programs (it has happened with Thunderbird, Compiz and the Help file), the top menu bar falls away. I don't mean it disappears in full screen (as it should), I mean it goes transparent and I can't click on it anymore after closing said software.
Finally, a little thing that is bothering me and I hope I'm not the only one: is there any way to move the new dock/panel to another side of the screen? I hate it on the left of the screen and I find it quite annoying that I can't fully customise it. For instance, the icons are way too big and I can only reduce them down to 32px using compiz. I find it fairly hard to navigate ubuntu now that I don't have direct access to all my folders and programs (yes, there is the dash, but that's actually more effort in my opinion...) I also can't add folders like my 'Downloads' folder. Is there some way of better customising Unity or some piece of software that might let me go into the finer details? I am very much an Ubuntu noob, so it would have to be something that's fairly user friendly
I'm running Xmonad and just recently it has stopped responding. None of my shortcuts are working at all. So I deleted my ~/.xmonad/xmoand.hs file, and still no luck. So I decided to log in as root and Xmonad works perfectly. Anyone know why Xmonad isn't working under my normal user? Is there a button i accidently pressed turning off the mod key?I was just browsing the web, then after I closed my browser nothing has been working, even after reboot.
View 1 Replies View Relatedhad a really good reliable machine going with 10.10, but for some reason upon powering up this morning is failing to boot. Any ideas on how to fix this problem greatly appreciated, i have already tried dropping to root shell un-installing reinstalling the gnome desktop but that doesn't appear to be the problem.
View 4 Replies View RelatedFor some reason I cannot update software or repositories.Failed to fetch etc. Thought trying a different mirror may help, where do I locate this.
okay so i changed mirrors. then
sudo dpkg --configure -a
sudo apt-get clean
and got
W: Failed to fetch http://packages.medibuntu.org/dists/...86/Packages.gz Unable to connect to packages.medibuntu.org:http:
W: Some index files failed to download, they have been ignored, or old ones used instead.
Do I need to alter my sources list. This wasn't a problem until now
I recently fixed a problem i had with Ubuntu which was the missing title bars but as soon as i enabled them on Compiz, my Desktop switcher app will not work. I've tried removing it and re-applying it but this does not solve the problem.Its there, in all its glory, but i cant click any of the other desktops it seems unresponsive when im left-clicking it but it responds and works fine showing blips of what it is or even adding or deleting rows and columns is optional.I know this happened immediatly following the compiz change so it has something to do with that and i think it might only have 1 desktop that it knows of because i can highlight desktop 4 and it still says 1, but im probably wrong.
View 3 Replies View Relatedso i'm trying to create a file with the current date as the prefix in the following way (following instructions from a tutorial):
Code:
touch 'date +%F'.log
its creating the file as:
date +%F.log
instead of 2011-07-31.log
[Code].....
what am i getting wrong/missing/failing to understand?
I'm eventually going to download an ISO via wget on a command line Ubuntu Lucid. How would I burn the image to the disc?
View 1 Replies View RelatedI have just installed Ubuntu 10.04 onto my Compaq Evo N1020v (quite old laptop) The installation seemed to install without any problems and all updates have been done in update manager. Ubuntu is the only operating system on the laptop. My problem is, neither of the file burning apps Brasero Disk Burner or Send to CD/DVD will detect my blank DVD's. Both apps detect the blank CD's without a problem. File browser is able to read data on this DVD type in fact I installed Ubuntu from a DVD of this type.
View 2 Replies View RelatedI've tried numerous times and different ISO's but I cannot seem to burn ISO's to CD+RW. I'm using Braseo CD Burner. All it does is make the disc have 0 bytes remaining and it acts as if it is a CD-R/CD+R
View 9 Replies View RelatedI have a dual boot system on a box with 3.6 ghz cpu, 4 gigs memory and 3/4 terrabyte hds. I cannot get a CD/DVD to burn using Brasero. Here is the log: Well here is the last part of the log. for some reason the forum software would not let me put it all in:
[Code]...
I have Ubuntu 11.04 with all updates installed.
I can not burn any cd / dvd with Braseo, GnomeBaker, nautilus burner, etc.
The discs are "apparently" normally recorded
But then Ubuntu or DVDPlayer does not recognize the DVD or CD I burned.
Conclusion: Waste DVDs because they are unusable and I can not record.
I have a Gateway nv-53 laptop.
P.D: In older Ubuntu editions, Fedora 15, etc, I can burn disc perfectly.
I want to burn some Ubuntu iso to pass to my my friends . I am myself new to Ubuntu . How to burn an iso image to cd with k3b and where to adjust speed to minimum .
View 2 Replies View RelatedI have 4 1.5 TB Seagate drives configured in RAID 5 via mdadm on Karmic. It seems that after a while, one drive always drops out of the array. It's a brand new drive, and after a reboot, it will come back in and rebuild just fine, so somehow I doubt the drive is actually failing. Here's a dmesg snip. The mounting that happens at the top is the mounting of the array, and as you can see, after a while, there is some kind of write failure.
[70178.385356] EXT3 FS on md0, internal journal
[70178.385373] EXT3-fs: mounted filesystem with writeback data mode.
[95234.954141] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[95234.954160] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[95234.954162] res 40/00:00:c6:66:a8/00:00:ae:00:00/e0 Emask 0x4 (timeout)
[95234.954168] ata5.00: status: { DRDY }
[Code]...
I have been using Ubuntu 10.04 (32 bit) as a headless workstation, running a VNC screen. Worked perfectly for about 3 weeks, then suddenly, I lost the Drag and Drop capability, for all applications.
For example:
Dragging and dropping to move items on the desktop does not work. The item simply pops back to the original location. Dragging and dropping to move items from one folder to another does not work. Same behavior -- the item just pops back to the original location. Dragging and dropping Bookmarks in Firefox does not work. The attempted Drag and Drop is ignored. Copy and paste still works fine. The problem does NOT occur when using an attached monitor (primary display screen :0).
I suspected that the changed behavior was caused by an update (from Ubuntu Update Manager). I confirmed this with the following:
Reinstalled Ubuntu 10.04 fresh from the live cd.
Configured minimal networking and installed VNC server.
Tested Drag and drop -- works okay
Applied pending updates (116) from Ubuntu Update Manager
Tested Drag and drop -- not working
I am using vnc4server and openssh-server installed from the repositories using Synaptic.
I have several NFS entries in my /etc/fstab file. Each entry generates an error during boot (from /var/log/boot.log):mount.nfs: DNS resolution failed for macpro.dpc: Name or service not known mountall: mount /mnt/BaseLines [656] terminated with status 32
This occurs even if I specify an IP address in fstab rather than a host name. I was really surprised by that. The odd thing is that by the time the system is up, not only is DNS working as expected, but the NFS shares are mounted as expected. I'd just ignore it for now, accept that it prevents Apache from starting since some of the server's files live on the NFS shares (this is a development system). It appears that the DNS resolver isn't running when the mounts are attempted and that they are attempted again later, after the resolver is running.
I did an
$ sudo apt-get update
$ sudo apt-get upgrade....
while upgrading packages in my ubuntu 10.4 i m receiving following exception
Code:
Failed to fetch http://za.archive.ubuntu.com/ubuntu/dists/lucid/Release.gpg Could not connect to za.archive.ubuntu.com:80 (155.232.191.229). - connect (113: No route to host)
Failed to fetch http://za.archive.ubuntu.com/ubuntu/dists/lucid/main/i18n/Translation-en_GB.bz2 Unable to connect to za.archive.ubuntu.com:http:
[code]....