Debian :: Squeeze Failing To Hibernate?
Jul 30, 2011
I've had a problem trying to hibernate, sleep doesn't work either, when I try it starts to hibernate but then the screen flashes and when I move the mouse I'm returned to my current X session. I see the following in dmesg
PM: Device usb10 failed to freeze: error -2
[ 682.481822] sd 0:0:0:0: [sda] Starting disk
[ 682.798713] Restarting tasks ... done.
Apparently this notation points to a USB root hub, I have a USB 3 capable MB and I saw few mailing lists suggesting this was a bug but I can't find a fix, anyone out there resolved this?
cat /proc/version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP
View 3 Replies
ADVERTISEMENT
Dec 20, 2010
I use my laptop at the college, and I've to suspend him frequently. So, I've decided to install the package pm-utils, to hibernate my PC, instead of power off it. When I try to do "# pm-hibernate", a tty appear, and this error is displayed :
[3506.405310] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
[3506.405310] PM: Device usb1 failed to freeze: error -2
This is the result in pm-suspend.log :
Initial commandline parameters:
[Code]....
View 14 Replies
View Related
Jan 28, 2011
I upgraded from Lenny to Squeeze.
I use Fluxbox as the window manager in X Window. I installed hibernate packages and gnome power management. I set the idle time at 30 minutes using the gnome power management program. It doesn't suspend at all. The monitor only shuts off during idle.
So, I logged in as root, started X. Without .xinitrc gnome desktop manager launched. As I clicked shutdown, it showed a dialog box asking hibernate / suspend / restart / etc. And then, I chose the [hibernate], the system shut down and came back to previous status when system restarted.
Which gnome program does control hibernate / suspend?
Is there anyway that I can control hibernate / suspend in command? I just need to make a little script and assign it to a launch key so that I can suspend the system when it's on idle.
View 8 Replies
View Related
May 18, 2010
Last nigth I upgrade my system to squeeze and it whent well except for grub-pc and udev. If i try to upgrade now udev will not install do to problems with the kernel version and grub-pc can't seem to find the boot image.
[Code].....
View 3 Replies
View Related
Mar 22, 2011
I have trouble setting up NFS on Debian Squeeze (2.6.32-5-kirkwood armv5tel GNU/Linux) running on a Sheevaplug. After some digging and googling I found that the NFS server is (probably) not properly installed.
no rules in iptables or hosts.allow or hosts.deny. Fresh OS install.
apt-get install --reinstall nfs-kernel-server
generates this output:
Setting up nfs-kernel-server (1:1.2.2-4) ...
Stopping NFS kernel daemon: mountd nfsd.
Unexporting directories for NFS kernel daemon....
Exporting directories for NFS kernel daemon....
[Code]....
It could be related to this bug [URL] but I wonder if the fix goes to the arm-branch as well?
I have never had any trouble setting up NFS before.
View 2 Replies
View Related
Jun 11, 2010
I've done the ordinary sources.list update (lenny to squeeze) and Code: sudo apt-get update sudo apt-get install dpkg apt aptitude.sudo aptitude full-upgrade However, udev failed to install, and I used..Code: touch /etc/udev/kernel-upgrade and did full-upgrade again. Everything was going fine, I went through several package configurations and suddenly, after 30-40 minutes of "Unpacking Setting up." I just heard two system beeps and got an error similar to a kernel panic. The SYSRQs did nothing. Did a hard reboot.I got two kernels in GRUB now. + the GRUB2 chainloading option. Used this one and got Code: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block It's all the same with the 2.6.32-5-686 kernel kernel panic. Using the older kernel didn't fail on the boot up, but showed many UDEV related errors and logging in was impossible - all I get were segmentation faults. Forgot to mention it - my FS is Reiserfs
View 7 Replies
View Related
Aug 6, 2010
I am running Squeeze on an older Compaq EVO laptop with radeon graphics.
A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.
The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".
If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.
View 3 Replies
View Related
Apr 10, 2011
I am still running the linux-image-2.6.32-5-686 kernel a computer with squeeze. I installed squeeze on it when it was unstable. I would like to bring up to the new stable state.Should I do apt-get install linux-image-2.6.32-5-686or should Iapt-get dist-upgrade
View 1 Replies
View Related
Apr 10, 2010
I'm using pm-hibernate, and would like to reboot the machine after it's done hibernating, rather than having the machine turn off.Is there a way to do this with pm-hibernate, or any other Linux hibernate thing?
View 2 Replies
View Related
May 21, 2015
My system cannot resume after hibernation. I have done all as described here [URL] ...
My have set up swap file "/swap_debian".
I have 3 partitions: sda1: windows boot partition. sda2: windows 8.1. sda3 : debian
I have the only linux distro installed: debian.
I have read lots of web pages. I have managed to set up suspend 2 disk. After dancing 2 days at the computer the system still cannot resume. I am getting "clearing orphaned inode" msgs while booting, and when booted to ram was not recovered.
Swap file is 4000 MB, RAM is 3860 something MB
My current grub is:
Code: Select all# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#Â Â info -f grub -n 'Simple configuration'
[Code] ....
And yes, I did update-grub.
My current /etc/uswsusp.conf is:
Code: Select all# /etc/uswsusp.conf(5) -- Configuration file for s2disk/s2both
resume device = /dev/sda3
compress = y
early writeout = y
image size = 1855258869
RSA key file = /etc/uswsusp.key
shutdown method = platform
resume offset = 31606784
My current /etc/fstab is:
Code: Select all# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
[Code] ....
View 0 Replies
View Related
Feb 11, 2011
I am trying to install a printer driver on an amd64 that was designed for 32bit only (of course)Squeeze automaticallty installed the ia32_libs package, but it may not be enough.How can I tell which library is failing?I do get an error on libcupsimage.so.2 but it does exist in /usr/lib/libcupsimage.so.2
View 4 Replies
View Related
Jun 29, 2015
Although it's worked very consistently in the past, since moving to the newer kernels (3.16 or 4.0) on strech/sid, resuming from hibernation seems to randomly work -- sometimes it loads the image from swap, but other times it simply does a fresh boot. To troubleshoot, I've increase the size of swap and then updated 'fstab', the initramdisk, and grub -- but still no reliable behavior...
View 10 Replies
View Related
Apr 29, 2011
I have already installed gnome-power-manager.
There should be the suspend and hibernate buttons in th System Menu, but there is only two options, Shut down and Log off.Also, in the Power Manager Preferences window, it has no option for suspend and hibernate.
How to add suspend and hibernate options?
View 7 Replies
View Related
Feb 16, 2011
Is there an "official" way to add suspend and hibernate functionality to the KDE logout/shutdown menu in Squeeze? What packages do I need?
ps. My computer is not a laptop - it's a normal desktop machine
View 1 Replies
View Related
Aug 29, 2015
I never turn off my laptop so I never noticed this, Debian never ask me my user password ! I reboot my pc several time to be sure. However, If I lock the pc or hibernate, then Debian ask me my user password.
View 4 Replies
View Related
Feb 26, 2011
I am having some pain with my new Squeeze installation, I am not sure if I am asking to much of it or it is an easy fix.
Firstly my system is laptop which I regularly plug a second monitor into. The video adaptor is an ATI HD4550 mobile.
My problem is that when ever suspend or hibernate my system, and even sometime when I boot up the screen(s) are just blank, although sometime they don't, it always happens if I suspend by closing the lid of my laptop, and only sometime happend with through Gnome is go ->System->Shutdown->Suspend. This is really annoying.
Another issue which I think is connected is that as I said I have a second monitor (most of the time) and when I boot up then it works until I log in, then a message pops up say the configuration can not be applied and it revert to Mirror mode or it does this thing where it places the second screen inside (virtually) the built in Laptop panel, it will not let me fix this through the monitors dialog just displaying the same message. I can fix this by doing
invoke-rc.d gmd3 restart
This gets as far as killing Gnome them it prints an error the to console, at which point Imopen a new terminal by ctrl+alt+f2 and
invoke-rc.d gmd3 stop
invoke-rc.d gmd3 start
then it works fine and even remember that I set the secondary screen to be the primary monitor through xrandr.
I tried install fgrlx drivers instead but it didn't really fix the issue, so I removed them.
View 5 Replies
View Related
Jul 9, 2011
I installed the debian 6 on the tninkpad T42, use the Suspend,it can entry the suspend state，I type the key let it come back, it can exit the suspend state, But the screen always display "black",can't come back the X window.
View 2 Replies
View Related
Oct 28, 2015
Installed Debian 8.2 a while back, and I've been having issues with getting the machine to suspend correctly. If I try to put it to sleep when logged in to my regular user account the screen just goes black and then the computer hangs. However if I put it to sleep as root everything works fine. I do this by running this command (as root):
Code: Select allsystemctl suspend
What can I do about this? Worked fine on Debian wheezy..
Btw, just found this in the dmesg log. Connected perhaps..?
Code: Select all[Â Â 6.863018] ACPI Warning: SystemIO range 0x00000000000018e0-0x00000000000018ff conflicts with OpRegion 0x00000000000018e0-0x00000000000018ef (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[Â Â 6.863028] ACPI:
If an ACPI driver is available for this device, you should use it instead of the native driver
View 7 Replies
View Related
Aug 16, 2010
My Thinkpad T61 just got a Corsair X256 SSD in the ultrabay (where the CD usually is). This works well except for hibernating. Earlier I had a traditional HDD drive there which also hibernates just fine.After a failed hibernate the machine hangs with this message on screen:
ata1.00: status: { DRDY ERR }
ata1.00: error: { IDNF }
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: failed command: FLUSH CACHE EXT
[code]...
And looking in the kern.log I see this:
Aug 16 18:57:00 lap kernel: [ 175.690230] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 16 18:57:00 lap kernel: [ 175.690237] hda: task_no_data_intr: error=0x10 { SectorIdNotFound }, LBAsect=1207959552, sector=18446744073709551615
[code]....
View 3 Replies
View Related
Mar 9, 2011
I have Debian 6 (squeeze), I have also seen this under Ubuntu (can not remember how I fixed it). (has worked in ubuntu 10.10)I can hibernate, but when I switch on the system cold boots (it does not restore previous session).Note suspend works fine. Have looked in /var/log/pm-suspend.log Shows for each block of suspend suspend a block of resume suspend, but hibernate hibernate is not followed by resume hibernate ( I assume that is what is expected.)
View 7 Replies
View Related
Sep 6, 2011
I've been running 6.0.2 amd64 stable since release day and recently have noticed my suspend and hibernate do not work. Normally I have transmission running and have set it to not enter sleep mode while torrents are active. However today I have not had transmission and was wanting to see if the sleep mode options would kick in. So I have set my display to "sleep when inactive for" 5 mins (this works perfect)
I have set "put computer to sleep when inactive for" 10 mins (this does not work at all)
When I try to manually test suspend my display flashes black for a few seconds but remains backlit, then asks me to log back in
When I manually go into hibernate mode my display turns off, pops back on for a second and in a terminal says something about a usb device (something failed but it happens so fast I cannot read it)
View 3 Replies
View Related
Oct 6, 2015
I am Debian Sid user and have some issues with my keyboard. I installed Debian some months ago and my laptop was always plugged on the external screen with external keyboard and mouse. For the fist time I took my pc at school and notice that when I close the lid (hibernate) then open it, I can't use my keyboard because of freeze. The screen turn on but the keyboard is dead. I have to close the lid few time and suddenly it work. Never face this problem before because with the external keyboard there is no issue.
I installed on the another HDD, Fedora, Mint, openSuse and the problem is the same.
I found some tuts like
- Open gksu gedit /etc/default/grub
- Find the line : GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
- Change it like this : GRUB_CMDLINE_LINUX_DEFAULT="quiet splash atkbd.reset"
View 0 Replies
View Related
Jun 14, 2011
I am using debian 6 on an acer 5338, intel 3d integrated graphics (don't know the exact type)
When I hibernate and restore the display/fonts can be corrupted. It can be fixed by logging out and back in. Switching virtual terminals (ctrl-alt-f?) has no effect. Is there a better fix?
View 1 Replies
View Related
Oct 4, 2009
How do I enable suspend in Lenny currently I can shut down or hibernate. In ubuntu on a different computer I can suspend which resumes very quickly can this work on Lenny also it does not hibernate properly anyway, there are error messages.
View 1 Replies
View Related
May 6, 2010
I am trying to make a backup copy of a DVD without success. k3b simply stays there silent doing nothing and I have to terminate the application. Is there a way to make DVD copies if one needs to?EDIT:I am using the home partition for caching as it is the biggest one on the disks; /tmp is too small.
View 5 Replies
View Related
Feb 11, 2016
Every time I try to create a bootable USB on my sid boxes, it comes out corrupt. I'm trying to use a multi-arch netinst iso so I can back up my tablet. Anyway, I use
[code]
# cp debian-8.3.0-amd64-i386-netinst.iso /dev/sdf
[code]
And it won't boot, so I checked the drive with gparted on my desktop, and get some errors about invalid block sizes and corrupt partitions. When I try fdisk, it lists an EFI partition as I would expect, and then another partition with the right size, but its listed as type empty. I also get some invalid size errors there. This happens with an older iso I have successfully used in the past. When I run fdisk on the ISO file, I get the same errors as the USB drive. Here's the output
[code]
daniel@frakenstein:~/Downloads$ sudo fdisk -l ./debian-8.3.0-amd64-i386-netinst.iso
Disk ./debian-8.3.0-amd64-i386-netinst.iso: 556 MiB, 583008256 bytes, 1138688 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
[Code]...
I think my issue is with the message about 2048 vs 512 byte block sizes. I tried setting up partitions on my drive and just copying data to them from the iso. This makes the BIOS recognize the USB disk and it tries to run the bootloader, but fails since the symlinks are messed up copying that way. I've tried a few different boxes (all running sid) and I get the same results on all of them.
View 6 Replies
View Related
Apr 2, 2011
I just installed Debian Squeeze onto my desktop and when i try to access it I get a dialog displaying:Error mounting: mount exited with exit code 1: helper failed with:Error opening '/dev/sdb1': Permission deniedFailed to mount '/dev/sdb1': Permission deniedPlease check '/dev/sdb1' and the ntfs-3g binary permissions,and the mounting user ID. More explanation is provided at[URL]
View 3 Replies
View Related
Feb 3, 2016
I'm unable to get the "Uncomplicated Firewall" (UFW) to deny incoming pings. I've set it to deny incoming. Yet when I ping it, it responds.I'm using Debian 8.2 jessie KDE fresh/clean install with all updates.Below is the terminal output from a simple test (I've added an extra line feed between the commands for clarity):On a Debian 8.2 computer -- I install UFW, enable it, check its status (deny incoming), and get the Ethernet address:
Code: Select allroot@Computer:/home/user# apt-get install ufw                                                      Â
.... (long output -- no errors or warnings)
root@Computer:/home/user# ufw enable
Firewall is active and enabled on system startup
[code]...
The Debian computer with UFW active is responding to the pings, when it should be ignoring them.Rebooting the Debian computer doesn't fix the problem.This setup is very simple. I'm using all UFW defaults.This is a new Debian 8.2 install (clean) with all updates.
View 3 Replies
View Related
Jan 16, 2011
Decided to swap from ubuntu to full blown debian - and glad I did - just feels right using debian to me. Anyways. On my desktop im trying to edit my "Applications" menu" so that it includes "Programming" and "Other" sections of the menu. So i righclick "Applications" goto "Edit Menus" and try to checkbox the "Programming" & "Other" menu options. Alas as soon as I check them - the tick dissapears again - and there is no way for me to edit the menu. Its my system I have full access.
View 4 Replies
View Related
Sep 13, 2010
I get the following errors when installing samba.
slutb0x:/etc/samba# aptitude install samba-dbg
The following NEW packages will be installed:
samba{a} samba-dbg
0 packages upgraded, 2 newly installed, 0 to remove and 1 not upgraded.Need to get 49.2MB/55.5MB of archives. After unpacking 149MB will be used.Do you want to continue?
[code]...
View 5 Replies
View Related
