I am having a problem with Dolphin where if I am trying to view the files in an extra partition I have mounted it crashes. It only does it on partitions not usually mounted at start up. The error it gives is:
Executable: kdeinit4 PID: 6209 Signal: Aborted (6)I am running fully updated openSUSE 11.4
I have a windows partition mounted that will not allow me to load my kubuntu 10.10 meerkat. i can enter an older kernal but my older kernal says cant contact kded and all my kde apps will not work such as wireless networking and autp ip configurations. although i can run the internet in this kernal wired however manually putting my ip and other numbers in for wireless connection fails. all other kernals do not load because they say i have a ntfs drive mounted. so my question is how can i unmount this drive and make my kernal work again or how can i fix kded from crashing on my second kernal so i can use that one. i have already tried sudo unmount /media/windows and other simular commands i also tried a mounting app and reinstalling kubunt desktop also check disk on windows with clean shut down does not work either.
View 6 Replies View RelatedAfter update 11.2 to 11.4 copy jobs from netware 5.1 volume to local disk linux system does crash after a couple of seconds. I might have to do if there a allot of small files in that job. If happend system reboot is required because unmount netware volume nor delete copied files to the local linux system is not possible. Recompiling ncpfs package not possible because error free source package ncpfs version 2.2.6 might not be availble.
Error message:
May 22 19:31:03 jaci kernel: [ 4694.764721] ------------[ cut here ]------------
May 22 19:31:03 jaci kernel: [ 4694.764730] kernel BUG at /usr/src/packages/BUILD/kernel-desktop-2.6.37.6/linux-2.6.37/include/linux/dcache.h
[code]...
Just installed 11.3 and upgraded kde to 4.5. Install is on Toshiba notebook with Win7 and Mepis 8.5.
Ntfs and all other partitions show in fstab and partition manager but not in Dolphin or Konqueror.
How to see and mount other partitions?
How can i get the windows vfat partition at left side of dolphin? Windows vfat drives are mounted in /windows.Those are not displayed at the left side of dolphin.
View 6 Replies View RelatedThis is probably me looking but not seeing an option somewhere. I re-installed 10.10 over 10.04 by formatting the root partition but keeping the home partition the same, to save me a lot of work. (64 bit) However, now when I mount a CD, DVD or USB stick, they don't appear in Dophin's "Places" window. What have I missed please?
View 2 Replies View Relatedrecently i did a fresh install of 11.3 on an ext4 partition. My data disk is a ext3 and the new system mounts it during boot.I can write to it but i can not execute programs from this partition.in fstab i can not find something like "noexec"permissions of mount folder looks ok for me. e.g. execute compiled "hello world"
me:~/datadisk> ./hello
bash: ./hello: Permission denied
me:~/datadisk>
[code]...
Since installing upgrades including KDE4.4 and having to reinstall plasma-desktop, when I launch Dolphin file manager via alt-f2 it always crashes. In the status at the bottom is reads...
" The process for the file protocol died unexpectedly. "
When I run Dolphin as my current logged in user there are no issues.
I am running 64-bit current. I have not identified which update started the Dolphin crashes, but it recently has been happening very often, usually within a few seconds of starting it, but not always.
Googling suggested that it might be a dbus issue, so I rolled my own package using dbus-1.4.0 and the slackbuild from the 64 bit current source.
Dolphin has been rock solid since. I noticed that there was an 'allow root globally' patch which I commented out. I am guessing that this may affect applications that I have not used yet or the issue has been fixed in version 1.4.
I have not seen any evidence that other current users have had this problem, but maybe Robby would consider an upgrade?
Firefox is crashing whenever I go to a page with a java applet such as this one [URL]... I get the following output in the command line:
GCJ PLUGIN: thread 0xb5e191f0: NP_Initialize
GCJ PLUGIN: thread 0xb5e191f0: NP_Initialize: using /usr/lib/classpath/gappletviewer.
GCJ PLUGIN: thread 0xb5e191f0: NP_Initialize return
GCJ PLUGIN: thread 0xb5e191f0: GCJ_New
GCJ PLUGIN: thread 0xb5e191f0: plugin_data_new
[Code]...
I've installed slackware64 up to date and have a annoying problem:
Dolphin crashes many times.
Here is some debug info:
I have an NTFS partition problem which prevents me from installing openSUSE on my desktop computer. It's not a trouble with installation, it's a security issue relating to NTFS.I have a desktop running XP exclusive, but wish to also go dual boot but can not because I have created a NTFS partitoin on my HD wich I don't wish others to know about.After booting window$, I am able to successfully unmount the partition using Diskpart, which is a command line program within that OS. Once unmounted, it is effectively hidden from those who might be snooping until I manually remount it. Essentially I remove the drive letter which makes it inaccessible to Windows.
(Yes I know a person with proper skills can easily find it, but that's not applicable in my case for those who would look)If I install openSUSE which I desperately desire, it will automatically locate and mount the NTFS partition I wish to hide, making it easily accessible to anyone booted up in SUSE.Changing the attributes to the associated files to "hidden" is not an option. I need that secret partion to remain unknown.How can I hide, deny access to, or prevent that particular NTFS partition from automatically being mounted in Suse? Once that security issue is resolved I look forward to using Suse again, like the other people do in our home.
I don't know where to begin figuring this out. On a total fresh install of kubuntu 11.04, everything went fine. When I do any copying in dolphin it crashes. Konqueror does the same thing. I installed samba and I can copy files when using samba from a remote computer, locally it crashes dolphin and konqueror. I turned off desktop searching, still crashes. I tried copying from konquorer to dolphin and vice versa, crashes everytime. The system notification acts like it started the copy and keeps whirring until I close it. What can I try?
View 6 Replies View Relatedwhen I mount DVD-ROM to some files from xterm, the systerm never responsed! I used this command: sudo mount -t iso9660 /dev/cdrom /mnt/cd I search some info from google ,some guys say these info may help ,but I don't understand why it cab be crashed when I mount the CD from DVD-ROM.
/etc/fstab
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0
lrwxrwxrwx 1 root root 3 05-22 19:54 /dev/dvd -> sr
dmesg |grep hd
[ 9.126848] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS.
using suse 11.3 and kde 4.4.4 on the mounted fat32 partition I cannot change icons partition is mounted in fstab in this way:/dev/sda8/ /dati vfat user, users, gid=users, umask=0002, utf8=true, 0, 0.I can create files folders modify, move and save them on the partition but if I try to change the icon (in dolphin right click>properties>click on icon) of the /eros folder (or any other folder or link) system gives me
this error:impossibile salvare le proprieta' , non hai accesso sufficiente per scrivere su /dati/eros/.directory tha in english is something like this: impossoble save properties, you havent enough permission access to write on /dati/eros/.directory this happen also as superuser I remember that with suse 11.0 or 10.3 I was able to change icons on fat32 partitions, now with 11.3 I cannot, there ought to be a way to do what I did with the previous version with this 11.3 brand new ad more advanced version shouldn't it?
Is there a program that will reread the partition table and update the kernel even if one of the unmodified partitions is mounted? I installed my system on one partition, then I added another with free space. Now I want to format the second partition, but the kernel doesn't know about it yet. I tried sfdisk -R /dev/sda, but it refuses while the root partition is mounted. Is there anyway I can avoid rebooting?
View 2 Replies View RelatedI have Ubuntu server 8.04. I have 4 hard drives of 149Go each. Size of a mounted partition is smaller thant the partition itself :
- first drive is the system
- I mounted the 2nd drive (ext3) on a folder, but the Size is 941.89 MB instead of 149Go
- same for drive 3 monted on another folder, but the Size is 941.89 MB instead of 149Go
I have recently installed Debian 6.0 Testing with KDE4.4.5. I have two fixed ext3 partitions on the hard drive but when I click on the second partition in Dolphin the following error message appears: "org.freedesktop.hal.device.volume.permission denied, refusing to mount /dev/hda5 for uid=1000". I have searched the kde forum and other sites and have found reference to it on other distributions. It appears to be a hal configuration problem. KMint kde 4.4 seems to have resolved the problem as my other partition is running the same kde version and I can access the debian partitions. Perhaps I should just manually mount the partitions when needed!
View 3 Replies View RelatedI am using a new install of Kubuntu 10.04 LTS. My system is a 64-bit AMD desktop.
I use a small partition for my entire Kubuntu install, and use separate, larger partitions for my media and work files.
I opened up Dolphin (my KDE file manager) via GUI, navigated to my media partition, and attempted to create a new folder by
right-click->
Create New->
New Folder-> etc
The Create New in the menu is ghosted out, as if I have no permission to access it.
How can I write files to the drive?
I just installed Fedora 12. When I open Dolphin, I do find links on the sidebar which enable me to mount the NTFS partitions with a click. I want to disable this for less privileged users and only allow root to do mount and unmount of partitions. I was not able to see autofs installed nor any sign of entries in the fstab.
View 3 Replies View RelatedEver since I started using KDE as in 4.2, I have been doing this regularly. When I startup KDE, I open Dolphin and click and mount each partition with root pass. I thought it might be some KDE issue as is the ever developing code and will be fine in future updates. But now I'm in 4.2.1 and it still exists. Upon inquiring fellow users on other distros, I have come to believe this is a *Fedora only* issue now. [URL].
View 8 Replies View RelatedWhen I powered-up my computer today I received the message that the home partition listed in /etc/fstab cannot be mounted and to press ESC to go to the recovery shell.
My computer is dual-boot, with Windows on the first hard disk (sda) and Ubuntu 9.10 on the second hard disk (sdb); I am using Grub version 1.97 beta4. The home partition is thus on sdb2 and the file system is ext4.
The /etc/fstab file contains all the partitions and has not changed since last October. Also, when issuing the command fdisk l, all partitions are correctly displayed, including the home that cannot be mounted.
Finally, the command fsck /dev/sdb2 quickly returns the result that /dev/sdb2 is clean!
I am trying to actually wipe my entire hard drive and figured it may just be easiest to format the hard drive and deleting the partitions. So when I go to System => Administration => Disk Utility => Select the Hard Drive => Click Delete Partition => And I get the error shown in my screenshots. What would be my best way to delete this partition and remove ubuntu completely for the time being. And yes I am using the latest RC. 10.04. However I don't suspect this is a bug.
View 7 Replies View RelatedI'm using LVM-based partitioning. I can not mount one partition. Here is some information I can provide.
Untitled-1.png
snapshot7.png
snapshot8.png
This incident happened after I try to encrypt this partition and then an error message appears. If not mistaken, it contains an error number (I forget) and a warning which reads that can not remove the LABEL on the devices.
ive been dual booting ubuntu and windows for a while now. For the first time in weeks ive booted windows XP, and i really hate the fact that windows explorer can't read more than the first partitions. Is there a way to make the explorer see more? I want to be able to reach my files on the ubuntu partition from windows, not just the other way
View 4 Replies View RelatedI am trying to save a document in a mounted partition but its says I don't have the permissions to save the file. It says this for any partition. I am only able to save it in my home directory. How to I solve this. Basically I am trying to access a file in linux in windows xp. So I need to save the file in fat 32 partition which it is not allowing me to do.
View 4 Replies View RelatedI would like to resize the /home partition but it is mounted and when umount is run, it errors with 'busy'.
System Configuration:
I installed jessie on a laptop with one SSD. I used guided partitioning and selected the whole drive with multiple partitions. The /home now takes up 420 GB. I would like to reduce that to 20 GB to make room for another partition.
What are the methods reduce this partition?
I installed Fedora 15 onto sda2, and a df looks like this:
Filesystem Size Used Avail Use% Mounted on
rootfs 3.9G 3.4G 311M 92% /
udev 991M 0 991M 0% /dev
[code]...
I had my hard disk partitioned as below:-
Size Label Mount point File system
52 GB Multimedia /MM ntfs
52 GB Backup /ABackup ntfs
52 GB Extras /Extras ext4
27 GB root / ext4
60 GB home /home ext4
The problem is that I cannot access the /MM and contents. I tried Properties > Permissions and changed applied the changes to subfolders and contents too. Now I can access /MM but not the contents. All are marked with a lock logo.There are numerous folders/files.Changing the permissions individually is a hectic work.possible to do it in a command line/script?
I'm totally new with linux and Ubuntu. I've just installed 10.10 yesterday and since then it's been an uphill struggle These forums has helped me out quite a bit already so I hope you can continue doing it with this problem I have.I got a single drive where the bootpartition is ext4 and the other "storage" partition is a remenant from a windows 7 installation I had, with NTFS. Decided I wanted to give Ubuntu a try! Now i've run into permission trouble though, mainly because I wanted to set up an FTP server (oh what a struggle THAT's been, I have some stories... ). I've done a "mount --bind" so that I can reach different resources directly from my chroot. It turns out though that the mounted partition isn't giving anyone except the owner (me) permission to see the resources. FTPing into the server gives the mount points but gives a 550 error and can't list anything inside of them.It works perfectly for me just running it at the prompt or using the mount points directly in the Ubuntu GUI though (since I'm the owner/admin/whatever).
My intended solution that I've found was that people with NTFS drives did a few magic tricks with the line of text in Fstab so they could access their NTFS drives. Problem for me is that my sda3 mount isn't showing up at all in fstab, even though fstab is supposed to (as far as I know) show all mounted devices on there. All the while, I have my sda3 totally accessible from /media/Storage/. Any pointers as to why this is?After I installed Ubuntu, I just mounted the sda3 with the Disk Utility from System->Administation and didn't think much of it afterwards until now.What's the best course of action here? remount the ntfs partiton using fstab? Convert the ntfs partition into an ext4? I have a lot of data on there I want to keep as well.