Slackware :: Current Make Trackpad Scroll Normal ?
Apr 17, 2011
So I've installed a slightly earlier version of -current than is out now and installed the 2.6.38.2-smp kernel on my Asus eeePC. Normally (both on this computer and every other laptop I've used, other than Macs) you scroll by swiping one finger up/down the right side of the trackpad. This installation, however, has made the scroll similar to the Mac scroll (two fingers anywhere on the trackpad, swiping up or down). How do I change it back? I have no xorg.conf file
After upgrading to -current (using slackpkg), my touchpad scrolling won't work.I remember that this had solved my problem previous time and in fact, after upgrade I have changed nothing (since this file already existed there). When I check the /usr/share/hal/fdi/ policy/ 10osvendor/ directory, I see that no "11-x11-synaptics.fdi" file was present. I just copied the file from /etc/hal/fdi/policy into this directory, but this did not help. Can somebody guide me through this?
I am using the most recent -current (that fixes the libpng "ratness" described in the ChangeLog 8-) and the Intel Framebuffer setup is annoying me. I specify vga=normal in LILO and to my knowledge I am not asking Intel Framebuffer modules to load at boot (and intelfb is blacklisted).
It's annoying because it makes the text microscopic. However, the machine works great in -Current so I can't complain. Graphics work fine and so does X, it's just annoying.
This is my Sony Vaio VGN-C140G detailed here: url
I had tried previously blacklisting inteldrmfb as well (the -Current release right before the libpng fix) and that made no difference.
I found all binaries with "intel" in their name and read the manual pages but didn't find anything useful for possibly manually setting the mode back to something equivalent to vga=normal.
I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk: /dev/hdx (a1-a3,b1-b3) /dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850 M2N-SLI Deluxe (Nvidia AM2) 4x1gb of 1066 kingston hyperX 3x500gb WD Caviar Black Sata2 3.0
I'm using Ubuntu on my Lenovo laptop which has a pointer mouse and trackpadt looks exactly like this:How do I disable just the trackpad, but not the red pointer mouse or the buttons above/below the trackpad.I did do a search and found a file I can download, but isn't there a keystroke or something built into Ubuntu that would avoid me having to download a third party solution.
I have always chosen "vga = normal" in my lilo.conf file so that I can see what is on the screen when I am in runlevel 1 or 3.
Having just upgraded to 13.37 on my laptop, I suddenly find that this "default" is being overridden somewhere and the typing on the screen is half its default size (80 x 25). Luckily, this hasn't extended to the typing I see when I run a console program like "terminal" (although the font appears a little more "fragile").
Is there a way I can make "vga = normal" the default in 13.37?
I installed Slackware 13 in VirtualBox 3.1 (seehere)When I'm logged in as a normal user, I get a mesage that Intel *** (sound device) doesn't work anymore and I hear no sound.But it works very fine when I'm logged in as root.
I am using a Linux machine with a KVM switch at work, and I commonly use emacs while switching between that machine and my other machine. I typically use the keyboard shortcut to swap between machines on the KVM, which is the key sequence: Scroll Lock, Scroll Lock, Up or Down. If I have an emacs window on top on Linux and hit these buttons, it will trap the Scroll Lock key presses and trigger a system beep from the CPU speaker. The KVM still switches, but on occasion, after the switch, it will register Scroll Lock as being stuck pressed, and so I'll be treated to an earful of system beeping. I have to switch back to the computer to get it to stop.Is there something I can put in the .emacs file that will prevent the program from beeping when I hit Scroll Lock with the window on top?
I really enjoyed using Apple's wireless Mighty Mouse and Magic mouse because of their ability to easily touch scroll 360 degrees. Unfortunately, Linux drivers are not provided for these mice.Is there an equivalent wireless mouse that works well in Linux? Ideally with native support or community provided drivers, etc.
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element err:alsa:wine_snd_pcm_recover underrun occurred err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
I've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
I've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
I use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
The new scroll tab that 11.04 has appears when you hover over the orange area on the scroll bar. The scrolling arrows are gone.Well this scrolling tab often vanishes before I can click on it to scroll down. Is there a way to revert to the old style, like the scrolling mechanism on these forums? It is nice to have the option of the arrows on top and bottom, along with the scroll tab thing.
I want to make one Fedora 14 as server that have Date and Time as normal. Is there any to make other fedora 14 get Date and time from that Fedora 14 server
This is not an earth-shattering issue, but, something I've recently noticed with the Chatzilla add-on for Seamonkey in Slackware-current. Maybe it is just my problem.If I add Chatzilla to FF 4.0 everything works as expected, that is, when I launch Chatzilla the default start-up window shows up with a list of IRC servers to click on (freenode being my favourite).
However,when I click on Chatzilla in Seamonkey I get a blank window that shows up, there is no server list. I noticed that the window in Chatzilla went blank for Seamonkey recently after a -current update (maybe a library issue?)
I'm very keen on getting Mumble installed on my slackware -current 64 bit install. I found a slackbuild script for 12.2 here, but changing the version number resulted in failure. I also tried following the build instructions on the Mumble website, which failed with the following.
Code: neil@slackbox:~/Downloads/mumble/mumble-1.2.2$ qmake -recursive main.pro Reading /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead. WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
i just updated my slackware to current, and every time i try to log in in my kde session my desktop is upside down.i mean literally everything is upside down, the only way i can have a usable desktop is with the "fail-safe session" of kde option on kdm which is what i'm using right now.does anybody know how can i solve this?i would post a snapshot of the upside down desktop but i can't do anything when i'm using it. fonts, windows, panels, icons everything is upside down..i solved this, just reinstalled the nvidia drivers and everything is goood again
I'm running slackware-current in a virtual machine on virtualbox 4, 512 mb ram, 1gb swap.Everything works fine, except the x11 mouse. Xfce will start up fine, and show the 'tips and tricks' dialog, and then freeze. I can't change to a TTY, or click. The mouse moves, but doesn't click.
