I tried to compile Gyachi on Slackware 13.1, but I failed.
The main problem is the lib gtkhtml. The current build file is expecting the version 2, but I found only the package for version 3.
An updated slackbuild for Gyachi on Slackware 13.1 could be the perfect solution (I guess).
Installed Slack-13.1 x86_64. Downloaded OOo_3.2.1_Linux_x86-64_install-rpm-wJRE_en-US.tar.gz and SlackBuild.
Started with:
Quote:
And ended with:
Code:
it's possible to compile the 2.6.37 kernel patched with the autogroup patch on a Slackware 13.1 system running 2.6.33.4-smp with 2.6.33.4 headers? I just compiled and installed the 2.6.37-autogroup kernel from AUR on my ARCH setup and I like it especially when using firefox with lots of tabs open and other background apps also running. I did notice a speed and smothness difference in my ARCH testing setup with this kernel patch and I can get same results in 13.1??
View 1 Replies View RelatedI have some problems when i try install vmware player My log: Quote:
[root@amd-x6 Downloads]# cat /tmp/vmware-root/setup-6567.log
Aug 30 01:01:56.955: app-139919401223968| Log for VMware Workstation pid=6567 version=7.1.4 build=build-385536 option=Release
[code]....
I'm trying to compile aget in 0.4.1 on my debian squeeze 64-bit but it failed:
Code:
It seems that this tool was abandoned since 2009. If there's any alternative to an application that can download files from network by splitting the download like aget.
Quote:
Maybe increase swap space will help? How to do it? When I install suse 11 on this box, I remeber it shows the swap space is 2G, I didn't find it anywhere now...
Quote:
Has anyone been able to successfully install Gyachi yahoo chat program under 11.3? I do not see any packages listed for 11.3 x86_64 and when I try compiling from source, I get dependency missing while looking for libgtkhtml2 greater than version 2.0 which is installed at version 3.14.
View 2 Replies View RelatedCant install gyachi on 11.04 - how to use gyachi???
View 1 Replies View RelatedAlright. The day before yesterday I *upgraded* to SUSE 11.3 from 11.2 and other than one single exception that required my input, all went smooth as silk for the install.
I was excited to see that, in Kopete, my webcam, a Microsoft VX-3000 actually worked for the first time! But I discovered that apparently Kopete doesn't support voice chat, even though webcam works.
So after searching for an application that would do BOTH webcam AND voice, I found out about GYachI/GYachE. It was installed via RPM from Packman. The install didn't appear to have any exceptions when it took place. However, whenever, in KDE, I attempt to start GYachE, before the window for it can even appear for more than 1/4 second, it disappears, evidently crashing (I gather).
Now I am not super Linux savvy. There is so much I have not learned, and one of those things is how to find out what failed when starting this application. I assume there is some sort of log file, but I have no idea where it is, what it is called, or how to use it even if it does exist.
I can live without voice chat, but I sure would like to have it! I have searched for an answer and found nothing to help so far.
BTW, I am using the 64 bit version of SuSE 11.3. I wonder if that has to do with the problem...
I am loving 11.3 so far. I use KDE and plan on adding stuff from the KDE site. 11.3 seems to be a solid distro from my end. I hope there is a way to solve this issue.
I'm using Debian Squeeze AMD64 gngeo version 0.7
After i ran ./configure
I got these error messages when I ran make
Code:
I am thinking about alternatives for VirtualBox (which i like, but the Oracle-story is making me think). After this thread: viewtopic.php?f=10&t=56314 I downloaded the vmware-player (manual, not with the download-manager ) and installed it. Oct 15 15:02:15.614: app-3078584000| Failed to compile module vmmon!
View 13 Replies View RelatedI tried to install lame on Linux, but I failed running ./configure.
View 9 Replies View RelatedI am trying to compile Zabbix on Centos 5.4 and while tying to compile it with mysql and some other parameters it gets failed because missing components.
Quote:
I couldn't find any jabber-devel or jabber pckg in repo.
The following command would remove the leading astericks, spaces, slashes, tabs and is present in an awk script.
Code:
gsub(/^[/* ]*/,"")
The above code is working fine when i run in Cygwin on windows machine. But when i run in Ubuntum throws the following error.
Code:
awk: ./Format.awk: line 30: regular expression compile failed (bad class -- [], [^] or [)
^[
awk: 30: unexpected character ''
awk: ./Format.awk: line 30: runaway regular expression /,""); ...
I'm having a hard time getting part of Asterisk (the open source PBX) called asterisk-addons to compile with mysql CDR support which I need to enable Realtime I believe. I've spent the whole day trying to fault find this one (including thinking I had ruined my box and creating a new CentOS build!) and am pretty worn outWhen I attempt to install asterisk-addons (I've tried 1.6.0.1, 1.6.0.1-patch and 1.6.1.0-rc3), I get the following line in a ./configure:
checking for mysql_config... /usr/bin/mysql_config
checking for mysql_init in -lmysqlclient... no
Then when I do a make menuselect, MySQL is not selectable and XXX"d out:
[code]....
First you need to download the source code from [URL]
Next you need to make sure you have all the dependencies in order to complete the build. All of the dependencies can be acquired with apt as usual.
Dependencies:
libtool
automake
libgraphicsmagick1-dev
libjasper-dev
libgtkhtml2-dev
libgpgme11-dev
[Code]......
Hopefully if all went well then Gyachi should be installed in /usr/local/gyachi unless you specified a prefix option to configure. Now you can run the Gyachi program from the shell or your menu.
I tried installing the RPM from tcpflow website. error: Failed dependencies: libpcap.so.0.6.2 is needed by tcpflow-0.21-1.i386 I installed libpcap1-32bit, but doesn't help. I tried added soft-link to libpcap.so.1.0.0 from libpcap.so.0.6.2 to workaround, doesn't help. hen I DLed the tarball, ./configure gives an error, even after including --with-pcap=/usr/lib64/libpcap.so.1.0.0 checking for --with-pcap option... configure: error: /usr/lib64/libpcap.so.1.0.0 does not exist I CAN'T install the rpm, I CAN't compile from source. I can't find this program on any suse repo. I need to use this prog -- what can I do?
View 14 Replies View RelatedI have tried to compile the fakeroot 1.15 on centos 5, but it always failed to load the shared library libfakeroot.so file. I tried compiling 32 as well as 64 bit version of library but always it failed to load the library and give the following error:
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
any workaround to get this working?
today i got this message everytime i try to login to yahoo messenger:"gyachi invalid user or incorrect password !" The user and password are corect, if i switch to kopete or pidgin is all right.Only with gyachi i have that problem. Using Fedora 10, gyachi improved v1.2.3
View 3 Replies View RelatedI'm trying to do the simplest thing. Compile XMMS. I navigated to the folder containing the extracted source and ran ./configure. That failed, so I remembered to install the build-essential package.
After that, I continued and got this output:
It said I didn't have glib installed, whatever that is. I did "apt-get install glib" and it told me it couldn't find the package called "glib". I thought, "Yeah, that seems a little too broad of a package name".
So then I went to Synaptic and did a search for "libglib" and noticed I already have libglib2.0-0 installed, as well as libglib2.0-data and libglib-perl.
How can I get this to to work correctly? I know the process should be ./configure, make, and then make-all, but I get stuck on the ./configure step.
trying to build Eduke32 from source but I receive the following error:
Code:
[priit@T16 eduke32]$ make
Build started using "gcc -fomit-frame-pointer -funswitch-loops -O2 -fno-stack-protector -W -Wall -Wimplicit -Werror-implicit-function-declaration -funsigned-char -fno-strict-aliasing -DNO_GCC_BUILTINS -Isource -Ibuild/include -Isource/jmact -Isource/jaudiolib
[code]...
I installed slackware 13.1 x86_64 bit with multilib, and its been about a month already, I'm really enjoying slackware but I am being troubled with my nvidia card, and I need to get my 3D acceleration working. And I've been looking around the net for information and kept on trying to make my nvidia card to work but to no avail. I cant get X to start, once I put in a xorg.conf stating to use the nvidia card. After troubleshooting for almost 2 weeks and now at my wits end, I now come humbly looking for help in linuxquestions slackware community forum.I've installed nvidia 64 bit kernel, drivers from slackbuilds (version 256.44). The laptop model I'm trying to get it working is an -ASUS K52J Intel Core i3 2.40Ghz with 2GB RAM and with an Nvidia Geforce 310M with 1GB dedicated VRAM.
View 14 Replies View Relatedwhats missing in gyachi to make voice-chat work?
In synaptic:
gyacji
gyachi-codecs
gyachi-data
gyachi-dbg
[code]...
everything is green.Video-Chat works, simple chat too. On updated lucid lynx 32, acer aspire 57322G.
I'm using sbopkg-0.35.0 in Slack 13.37, and Ponce's SBo-git current repository (but have the identical problem with the official SBo 1337 repository). I have installed GConf & ORBit2 from /extra & have installed the other dependencies (gnome-keyring, & libgtop) via Ponce's repository. When compiling libgksu, it errors as follows:
[Code]...
I am in trouble compiling libvirt (latest version 0.8.3) to use with KVM in Slackware64-13.1.
Here's the output of make:
Code:
Config.log is attached.
I've downloaded and tried to install the newest ATI driver, but I get this error when I try to build packages:
Code:
./packages/Slackware/ati-packager.sh: line 56: unexpected EOF while looking for matching `]'
./packages/Slackware/ati-packager.sh: line 406: syntax error: unexpected end of file
I extracted the package and am pretty sure I found the source of the error (a missing ]) but I'm unsure of how to repackage the installer after correcting it. I did a google search and at least one other person has had this error: [URL]...
I'm looking for a good IDE for C/C++, that runs well in slackware. I used CodeBlocks, but I can't compile in the current, and its getting a little old. I see a lot of threads talking about anjunta and kdedeveloper, but I don't like these.
View 14 Replies View RelatedHow do you compile a tar.gz source on slackware?I am asking because I am about to download and install Slackware(x64), and I have some drivers that it may not have (Ubuntu didn't have them) and TrueCrypt source.
View 9 Replies View RelatedIs this package supposed to compile on slakware64 13.1 ( I have also multilib) ?
I m trying to but I m encountering this problem:
Code:
People, there is a tutorial to upgrade the kernel 2.6.38.3(compiling tutorial included =D) to Slackware 13.1??And, this upgrade generate a better performance on system??
View 14 Replies View Related