trying to build Eduke32 from source but I receive the following error:
Code:
[priit@T16 eduke32]$ make
Build started using "gcc -fomit-frame-pointer -funswitch-loops -O2 -fno-stack-protector -W -Wall -Wimplicit -Werror-implicit-function-declaration -funsigned-char -fno-strict-aliasing -DNO_GCC_BUILTINS -Isource -Ibuild/include -Isource/jmact -Isource/jaudiolib
[code]...
Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
I tried installing the RPM from tcpflow website. error: Failed dependencies: libpcap.so.0.6.2 is needed by tcpflow-0.21-1.i386 I installed libpcap1-32bit, but doesn't help. I tried added soft-link to libpcap.so.1.0.0 from libpcap.so.0.6.2 to workaround, doesn't help. hen I DLed the tarball, ./configure gives an error, even after including --with-pcap=/usr/lib64/libpcap.so.1.0.0 checking for --with-pcap option... configure: error: /usr/lib64/libpcap.so.1.0.0 does not exist I CAN'T install the rpm, I CAN't compile from source. I can't find this program on any suse repo. I need to use this prog -- what can I do?
View 14 Replies View Relatedhow I can resolve this error in compiling?
Linking testkeys... /usr/lib/gcc/i586-suse-linux/4.5/../../../../i586-suse-linux/bin/ld: cannot find -lSDL_ttf collect2: ld returned 1 exit status make: *** [testkeys] Error 1
I received my dedicated server, and I was thrilled to work on it! After a while I encountered many, many problems, and most of them are fixed now.
However, I've been stuck on a LUA problem for hours now...When I check all files (/reconfigure) I get this error;
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
View 1 Replies View Relatederror message
Code:
mv -f .deps/gnc-icons.Tpo .deps/gnc-icons.Plo
mv -f .deps/gnc-html.Tpo .deps/gnc-html.Plo
make[5]: Leaving directory `/tmp/SBo/gnucash-2.2.9/src/gnome-utils'
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory `/tmp/SBo/gnucash-2.2.9/src/gnome-utils'
make[3]: *** [all] Error 2
[Code]...
I'm using SBo script to compile gnucash, with all the listed dependencies built successfully (in orderly manner). System multilib is configured as per alien's wiki. Is there something else I'm missing here?
Online Update is offered up 6 updates - only 2 succeeded (Mozilla and libpoppler). Here's the errors for other packages: kbd - Keyboard and Font Utilities (includes aaa_base update) Subprocess failed. Error: RPM failed: error: package kbd-1.14.1-20.2.x86_64 is not installed
php5: fix for several vulnerabilities Subprocess failed. Error: RPM failed: error: package php5-ctype-5.3.0-2.4.3.x86_64 is not installed
patterns-openSUSE: add susehelp to KDE base pattern
Subprocess failed. Error: RPM failed: error: package
patterns-openSUSE-file_server-11.2-20.22.1.x86_64 is not installed
KDE 4.3.5 Update
Subprocess failed. Error: RPM failed: rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
[Code]...
I've been working to get gcc up and running on a new install of Fedora 13. glibc-devel had dependencies upon installation where it required glibc and glibc-common, both 2.12.1-3. No problem, found both at rpm dot pbone dot net. However, when I try to install the following circular dependency results... it doesn't matter the order of install.
Code:
[root AT localhost gcc_install]# rpm -ivh glibc-common-2.12.1-3.x86_64 .rpm
error: Failed dependencies:
glibc = 2.12.1-3 is needed by glibc-common-2.12.1-3.x86_64
[code]....
I have 3 c++ files, classdef.h (header file with class definition), methods.cpp (class methods) and program.cpp - the program itself. Both .cpp files have
Code:
#include "classdef.h"
in files. How I can link the files together and compile them in one executable program? I am using Geany IDE for coding.
I'm preparing a laptop for Slackware 13.x or whatever the new release will be. I've installed '-current' x86_64 arch. Boy, is this baby fast on this laptop. I thought 13 was fast but oh well another thread.
My issue now is that with '-current' is that ThunderBird links won't open in FF. I click on a link in TB and noting happens. I searched and found '"Browser" problems in Thunderbird 3'.
In this thread, post #9;Quote:
Originally Posted by Laodiceans I had the same problem in two different machines. On one the file pref.js had this entry:
Code:
user_pref("network.protocol-handler.external.ftp", "/usr/bin/firefox");
user_pref("network.protocol-handler.external.http", "/usr/bin/firefox");
and worked fine.
[Code]...
I modified the 'prefs.js' file. Of course it was done while app was not running. Still no joy. Further searches showed the same thing with most users bumping back to older versions. There's got to be fix and I refuse to give up to a computer let alone a DE.
The issue I am currently facing is more of an annoyance / curiosity, and it may not even be a problem, but it sure feels like one. Background: I am becoming a computational chemist (grad school begins in the fall) and the code I run is all in fortran. I am currently compiling with gfortran. When I compile the code (on a box running ubuntu server), everything appears to compile fine, but the linking stage is taking five to ten minutes. I ran the time command while making it and got the following results.
Quote:
time make
gfortran -c -O3 -fomit-frame-pointer -finline-functions -ffast-math suijtab.f
Linking testCompile ...
done
[code]...
I just don't understand why it is taking 5 minutes of real time if it only takes 10 - 15 sec of system time?
I need to develop application for 32 bit environment.
Before to install FC11 64, I used FC 9 and FC 10 i386 version without any issues.
I'm lookking for a tutorial about use 32 bit development environment in a 64 bit OS.
How or where I can setup FC11 for this features.
We installed 3 new rhel 5.5 systems yesterday; each of which are generating this error " Error: certificate verify failed" in response to a basic "yum update". From what I can gather, via a general search, this may be isolated to x86_64 -- however the references I found were specific to Satellite Server (which we are not using). Never the less, I checked the PATHs for the cert and they are correct. All of our 32 bit systems are running RHEL 5.5 and this is not a problem on any of them.
View 6 Replies View Relatedi'm trying to compile the latest version of wireshark,a network protocol analyzer for Unix and Windows. i switch to root account and issue ./configure,and then some error occur .some outputs was omited,the red fonts was the key!
[root@localhost wireshark-1.2.8]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... gnutar
checking for gcc... gcc
checking whether the C compiler works... yes
[Code]....
I tried to install lame on Linux, but I failed running ./configure.
View 9 Replies View RelatedThe following command would remove the leading astericks, spaces, slashes, tabs and is present in an awk script.
Code:
gsub(/^[/* ]*/,"")
The above code is working fine when i run in Cygwin on windows machine. But when i run in Ubuntum throws the following error.
Code:
awk: ./Format.awk: line 30: regular expression compile failed (bad class -- [], [^] or [)
^[
awk: 30: unexpected character ''
awk: ./Format.awk: line 30: runaway regular expression /,""); ...
after i installed F14 on my box, I'll receive this error on boot log message: Code:Heartbeat not configured: /etc/ha.d/ha.cf not found.Heartbeat failure [rc=1]. Failed.how can i fix it?
View 1 Replies View RelatedI can not start fedora 15 because i take this message:HTML Code:Starting udev wait for complete device initialization failed, see ' system ctl status udev-settle.service for details
View 2 Replies View RelatedI am getting these error in RHEL 5.3 while i did "yum update".
---> Package libstdc++-devel.i386 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++-devel.x86_64 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++44-devel.i386 0:4.4.0-6.el5 set to be updated
[code]....
The program package-cleanup is found in the yum-utils package.
I have some problems when i try install vmware player My log: Quote:
[root@amd-x6 Downloads]# cat /tmp/vmware-root/setup-6567.log
Aug 30 01:01:56.955: app-139919401223968| Log for VMware Workstation pid=6567 version=7.1.4 build=build-385536 option=Release
[code]....
The background to the problem. I was dangerous, not deadly or elite and I want to be that way again. The best representation that I have found is oolite. Now this installs by auto-package but only in 32-bit and I find auto-package a bit of a pain. I have the windows version installed and running under wine but would prefer a compiled 64-bit Slackware package.
Oolite requires gnu-step so I have downloaded the source and some old (12.2) slackbuilds, which I have modified, and made a package for gnustep-make. The next stage is to make a package for gnustep-base however it is failing with the following error
Code:
./configure: line 1390: gnustep-config: command not found
configure: error: cannot run /bin/sh /tmp/SBo/gnustep-base-1.18.0/config.sub
I am getting the below Issue while cloning Oracle Database Server 10.2.0.5 from cold Backup dump. its happening during "perl adcfgclone.pl appsTier". Can anyone help on this issue..? find the error details below.
SQL*Plus: Release 10.2.0.5.0 - Production on Sat Aug 6 12:10:08 2011 Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
[Code]...
I have written an OpenGL based program which uses i.a. libjpeg that I want to link statically so I can send it to someone who doesn't have all the libraries needed installed to allow for a dynamically linked executable to run. As such I tried with giving the [b]-static[b] parameter to gcc.
Code:
x86_1$ make
gcc -O3 -c jpegloader.c
gcc --std=c99 -O3 -c --std=c99 -I/usr/include -L/usr/X11R6/lib main.c
[code].....
Why would gcc claim that I'm missing GLUT? This works perfectly fine when I do dynamic linking -- i.e. omitting the -static argument.
I have downloaded Fedora 11 x64, and I went to the adobe website and downloaded the tar.gz file for flash player. I went into the terminal to untar the file and after I did that I tried to install it and got this error :
ERROR: Your architecture, 'x86_64', is not supported by the Adobe Flash Player installer. What does this mean? My dad could get his to install but his is 32 bit.Do I have to wait until the full version is out?
I hope this post stands in the right section.I have a commandline i need to enter in terminal when i want to run a program. i tought lets put that piece of command in an .sh file and just click the file to run the program (then i dont need to open terminal first an give in the command) however the .sh file does not open the program. so i propably need to make a executable (application/x-executable).
View 3 Replies View RelatedI'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies View RelatedWhen I tried to install LibreOffice 3.3_64 on my Fedora14_64 I received the following error:
Package libobasis3.3-extension-pdf-import-3.3.1-8.x86_64.rpm is not signed Has anyone run into this? Is there a way to fix this?
There's a problem with static linking (and no problems with dynamic linking).
Here's my code:
Quote:
And makefile rule:
Quote:
That's dynamic linking. And it works perfectly. If i use static linking
Quote:
There is an undefined reference error:
Quote:
As nm shows there's a symbol named BuzzerInit in static library.
Today's update failed with this line tagged to every package:
Error: Unresolvable requirement /sbin/ldconfig for pixman-0.16.2-1.fc12.x86_64 (installed)
Error: Unresolvable requirement /sbin/ldconfig for libXrandr-1.3.0-3.fc12.x86_64 (installed)
Error: Unresolvable requirement /sbin/ldconfig for libedit-2.11-4.20080712cvs.fc12.x86_64 (installed)
[code]....