I'm running Slack13-64 and using wicd for my network connections. Is there any way that I can get it to recognize my usb tethered phone? I have a HTC Touch running WinMo, and when I plug it in it becomes eth1.Is there a way that wicd can find it? It only picks up eth0(Wired) and wlan0.
View 4 RepliesI have a Verizon Droid Eris, an Android phone that has not yet been rooted. Due to the lack of root capabilities the only way to tether my phone is through PDANet for Android. Unfortunately there is no Linux version of PDANet, so the only computer I can tether my phone with is my laptop which is running Vista.
I also have a desktop running Koala, which is ultimately the computer I want to get connected. I'm hoping that there is some way I can use Internet Connection Sharing on the laptop to accomplish my goal, but I haven't had much luck so far. I don't have a crossover cable either so I would prefer to connect the laptop and the desktop via my Belkin F5D7230-4 wireless router.
(Background: my wireless worked fine for a long time using wicd-1.6.2.1 and then all networks became hidden. The wicd website said there was a bug in 1.6.2.1 and to upgrade.) I obtained wicd-1.7.0.tar.bz2 from sourceforge.net. Slackware man pages recommend "installpkg <name>". I did "removepkg wicd..." and then install. Installpkg said it could not install it because it did not end in .tgz,.tbz,.tlz, or .txz. I changed the name to wicd-1.7.0.tbz(assuming that was equivalent) and did installpkg again. That gave "Verifying..., Installing..., Warning: package has not been created with 'makepkg'. Package wicd-1.7.0.tbz installed."
There is no entry for it in the Kickoff Application Launcher. There is an entry for it in /var/log/packages. There is in /etc/rc.d./rc.wicd a script marked executable. Can anyone see what got lost?
on my laptops I used to use Wicd with the Gtk GUI. However, now there is a KDE client, which I want to use instead, from now on:
Wicd Client KDE
I installed it, and it works quite well, so far. However, whenever I logon to a KDE session, the older Gtk client is started, too. I then have both Wicd clients sitting next to each other on my panel bar, and I have to manually kill the Gtk client. How do I get rid of the Gtk client in KDE, permanently? BTW, my laptops are running Slackware 13.1 stable with all patches up to now and some additional software from various repositories.
I have no idea where to start with WICD. I know it's on the Slackware 13 CD and where it is on the cd but from there I'm really just lost as what to do with the files there and such.
I'm so used to Windows and programming on Windows in C# .NET and tweaking/hacking there that I have no idea where to really start with Linux so if you have any special tips or places to go to read up on stuff so I can maybe figure out more about Linux and this I'd like that a lot.
I have been using wicd successfully for some time, lately with slackware 12. However, when traveling I sometimes find a place that gives an error message "encryption must be enabled".Probably this means that wpa-supplicant must be set up right, but I do not know how to do that.I have wicd starting at startup, then I type wicd on the command line until a prompt does not return, go to a different window, type wicd-client, then start kde and use its link to start wicd. So frequently this works fine; I get a connection to something I have a user name and password for, or am in a coffee shop where no such are required. But sometimes I get the above message. This happened to me in a coffee shop in Helsinki where I was given a user name and password, but still got the above message and could not proceed.
View 3 Replies View RelatedMy area does not have broadband, but I am able to get 3G on my cell phone. So, I've been tethering it to my laptop when needed, but what I'd like to do is set up my Slackware 13.0 box (which is configured to run as firewall/router/dhcp server so that I can just turn on my phone's wireless router program, and then share it out over the whole network in my house. I'm using a Gigabyte b/g wireless card, which has the RT61 chipset in it. I have NO problems at all getting the wireless card to work with just setting up rc.inet1.conf. The only problem here is when I need to take my cell phone with me, I will not be able to simply turn it back into a WAP, and have my Slackware box auto reconnect to it.
This is why I started looking into using WICD. I do NOT run X, so that's why WICD fits the bill, since it has a cli version. First I tried installing the version that came on the CD. No dice there. I removed that package, and tried the 1.7 package that's on the mirrors under current. I used slackpkg to install it. WICD will run, see wlan0, sees my WAP and a few others, but it fails to connect. It attempts to up the interface, and use dhcp to get an ip, but it fails everytime. My phone's WAP program only does WEP, but I can't get WICD to get an IP with our without WEP enabled. I made sure that my rc.inet1.conf file does not reference any interfaces.
In the template of Wicd, when I am outside the textbox, then everything in the textbox looks like this
(actually is was a big dot instead of a *) But whenever I clicked in the box, the text was shown
mypassword Is this something common on WiCD? And is there anyway I can fix it?
I've seen posts revolving around this issue on many different forums but none really have given and answer to the problem that i've seen thus far. so I'm trying to connect to a wireless network with WPA/WPA2 encryption. Every time WICD gets to the point where it searches for a DHCP server but cannot aquire an IP address. This only happens if the network is encrypted though. If I take the encryption of the network I can connect no problem. Looking in the wicd.log file I find a few errors that I have searched for but cannot find any answers.
2011/01/16 15:19:37 :: Connecting to wireless network The_Welchs_Media
2011/01/16 15:19:37 :: Running command ['wpa_cli', '-i', 'wlan0', 'terminate'] failed: [Errno 2] No such file or directory
2011/01/16 15:19:37 :: Putting interface down
2011/01/16 15:19:37 :: Releasing DHCP leases...
[Code]....
I'm kind of lost as to why I'm getting the no such file or directory outputs along with the PSK generation failure.
I once had wicd running at KDE startup as I was just playing around with it. The problem is I now have turned off rc.wicd and don't want to use wicd any more. Every time I start KDE it still asks for the root password which I cancel and it then tells me it can't connect to wicd's dbus. This is getting really annoying as I have been trawling through my ~ looking for the setting that starts this up. I just want wicd turning off completely and this message to go away.
View 14 Replies View RelatedI've been using wicd since starting out with 13.0 and it works flawlessly when using three different WPA wireless networks and a couple of wired networks. But, every time I get on a virgin train and try and connect to the internet via the open wireless network, wicd just hangs at the dhcp stage. If I stop wicd and edit rc.inet1.conf to contain this:
[code]...
wicd keeps dropping my wifi connection most of the time I can just tell wicd to reconnect the connection never stays up for more than 10 minuets with out doing other times it looks like it connected when it didn't other times it times out when obtaining the ip address in these 2 cases I have to run "etc/rc.d/rc.wicd restart
then tell it to connect sometimes posting on forums requires me to copy my text hit submit hope the connection is still up maybe restart wicd reconnect.is there a bug in wicd or python ?
I have recently started using this laptop as a host for tinkering with vmware. I have wicd installed on it, which normally brings up wlan0 and connects to the nearest configured wireless lan automatically.
Vmware has installed another, virtual, NIC on the host, called vmnet8. I configured it in /rc.d/rc.inet1.conf with a static IP.
Now when I boot up the laptop vmnet8 starts up and running and correctly configured, but wlan0 doesn't. I have the wicd icon in my systray but it doesn't find a network, even when i click on it and refresh etc. I have to open a terminal and "ifconfig wlan0 up" in order to get the NIC up. Then wicd works fine.
Networking configuration in Slackware looks like a bit of a nightmare frankly (why i usually use wicd!) so I thought i'd ask you chaps before messing about too much.
I just upgraded to 13.37, and for some reason wicd now cannot connect to my wireless point. It keeps saying the password is wrong, when I know for an absolute fact that it is correct (even changed the password to '1' just to make sure, and no dice. Which is weird because even though its the exact same version of wicd, and not only that, it no longer seems to be able to see networks with my built in card, so having to use a USB card. Anyway, googling turned up very little. Seems to be a common problem across distros, and some people reported that downgrading to 1.6.x fixes it.
So, I ran
Code:
removepkg wicd
And it uninstalled wicd. Downloaded wicd-1.6.2.1-x86_64-1.txz from a 13.0 mirror and did
Code:
installpkg wicd-1.6.2.1-x86_64-1.txz
While in the correct directory. It installed, and I ran wicd. But checking the version number when it loaded, it says its 1.7.0 again.
Not really sure why this happens. I'm assuming there's some remnant of wicd that removepkg doesn't dump, and its preventing me from installing this older version of wicd. What do I need to do for this? If anyone has a surefire way to make 1.7 work again, that would be fine.
If i do
Code:
su
password:
cd /etc/rc.d
chmod 644 rc.wicd
chmod 644 rc.wireless
will it do the job?
I have installed Slackware 13.1 without a problem and have a working wired ethernet connection. However I need to set up wireless but each time I try to do this using wicd I have a total system crash during the start up screens at the very last line before the welcome line appears.
Nothing works to resolve it, and I need to press and hold the start button and restart. I have checked the md5sum, installed the software again several times but the same happens each time which results in me having to reinstall.
I have installed wicd using slackpkg update, then slackpkg install wicd.
I have also tried downloading wicd from the slackware /extras folder and installing it on its own. Either way the same happens.
I have tried various manual approaches to setting up wireless following various links but again without success.
I now have a clean install again but am not wanting the same to happen.
Can anyone suggest what I might need to do?
I am using an intel Pentium 4, 2.53 ghz, 512Mb ram, GeForce4 MX 440.
I replaced the trusty old aironet wireless card with a trendnet scanbus wireless card so I could secure my home wireless with wpa encryption. It uses the ath5k module, and the wireless is set up with wicd. The issue is that if I stop browsing for about 2 minutes, the next time I start to browse, it will disconnect, then reconnect no problem. I don't know if this is supposed to be a feature, but it is sure annoying. Is there a tweak somewhere to stop this? The other option would be to use ndiswrapper and use windows drivers, but I'd rather explore tweaking, if possible. If I have to use ndiswrapper, would I have to rmmod ath5k first, or would it be ok to use ndiswrapper directly?
View 2 Replies View RelatedSo, in any other Desktop WM, wicd never asks for passwordyesterday I installed Openbox,etc from SlackBuilds and each time I start Openbox it asks for my user's password.I did some googling but couldn't find anything regarding Slackware & wicdand I'm using -currentUser is part of netdev group so what's the issue
View 1 Replies View RelatedI installed Wicd in my F13 but I got problems when starting it When I try to start it I got error message:
Could not connect to wicd's D-Bus interface - Check the wicd log for error messages.
I'v just installed wicd. I can't get it to sart, I get errors saying that wicd couldn't connect to it's dbus interface and the wicd deamon has shut down. Then there's a report from SELinux saying that it's preventing /usr/bin/python "write" access on /etc/dhcp/manager-settings.conf and that access is denied to wicd. I can get wicd to start if I su to root, but I'd like to not have to do that every time I boot. Is there a fix?
View 1 Replies View Relatedusing ndiswrapper for a usbwlan device. Configured and modprobe ndiswrapper confirmed working. When I 'iwlist wlan0 scan'I get cell (wifi network) profiles including my own and several of the neighbours - all showing ssid name and whether key managed or not. When I 'wicd-client' this shows my network as hidden. What makes it even stranger is that wicd-client shows all the neighbours network ssid. Check to see if my router is broadcasting ssid and is without a doubt. I have tried to connect to my router via CLI commands (iwconfig) but unable to connect as is wicd-client - will update with log files on this soon.
View 5 Replies View RelatedI have discovered that after employing the Wicd Network Manager I can no longer connect via ppp. The reason, it seems, is that each instance of Wicd changes the content of my /etc/resolv.conf file from:
Code:
search SPRINT
nameserver 195.128.182.5
to:
Code:
Generated by dhcpcd
# /etc/resolv.conf.head can replace this line
# /etc/resolv.conf.tail can replace this line
It has been suggested that I write a script that does this.
After I upgraded to current(Tue Mar 2 19:07:31 UTC 2010), I could not connect to any wireless network. It will always failed in obtaining IP address. When I rebuild the package and upgrade with the new one, the problem gone. Also I notice that the package I rebuild is different with the one on the stock tree:
Code:
..ckware-mirrors/slackware64-current% md5sum /tmp/wicd-1.7.0-x86_64-1.txz
446ff631eee4c862263ad0488e3a38be /tmp/wicd-1.7.0-x86_64-1.txz
grissiom 2010-03-05 17:21 @darkstar
[code]....
I can share my phone's 3G data with my 10.10 running laptop using usb tether; the phone has no wireless or bluetooth capability. Is it possible to set up my tethered laptop to share the 3G data with another device via the laptop's wireless?NKS!
View 1 Replies View RelatedI was playing around with bash scripting and the last thing I remember doing was checking for suid root files. However now I cannot launch sbopkg, tpfand etc and the binaries are nowhere to be seen. I was experimenting with the sticky bit for tpfand so I could load it as a normal user.
Code:
chmod u+s /usr/sbin/tpfand
chmod u-s /usr/sbin/tpfand
However now tpfand is no long in /usr/sbin. But a whereis produces the following results.
Code:
tpfand: /etc/tpfand.conf /etc/tpfand.conf~ /usr/share/tpfand
The same applies for sbopkg, which I have not touched. I think this problem is also related to the wicd error stating it cannot connect to DBus client From these symptoms has anybody experienced anything like this before from tinkering?
I am trying to use nm-applet with Arch/Openbox/tint2. I can't use wicd-gtk because wicd won't work with ad-hoc networks. I have tested nm-applet in Ubuntu/Openbox/tint2 and it works fine.
The error message is:
Code:
[esteeven@piccolo ~]$ nm-applet
** Message: applet now removed from the notification area
[Code]...
I've just got a nice HTC Desire (ie almost the same model as the Nexus One), and it can work as a modem for accessing the internet. After googling this, I've found out that on debian it works straight without adding any package, just as the pjone is connected. This is not the case on slackware 13... Has anyone got this to work already?
View 8 Replies View RelatedI somehow lost wicd. the icon is still at the bottom of the screen, but show "no networks present.' When I run iwfonfig as root it shows eth0 and lo, but no wlan0. When i run iwconfig, it says eth0 and lo with "no wireless extensions."
View 10 Replies View RelatedI was given a Cisco IP Phone (model 7962) and CyberGuard Firewall/VPN (model SG300) from my company. So that I can work from home. But I've been struggling for the past couple of days trying to get it to work. The phone successfully configures it's ip; but it hangs on "Registering".
The setup is such:Cisco phone plugs into the CyberGuard and gets assigned a private IP address; 192.168.48.34; from the CyberGuard.
CyberGuard plugs into my Slackware (12.1) box and gets assigned a private IP address; 10.0.0.191; from the dhcpd server on my Slackware box.
Slackware box then masquerades that 10.0.0.191 into my static public address on the internet.
Port 1723 (PPTP) is open in the iptables firewall on my Slackware box. I've also tried disabling the firewall (ie opening all ports) on my Slackware box.
On my Slackware box; via iptraf; I can see traffic between my Slackware box, the CyberGuard, and my company's server.
Traffic such as:
Code:
And on the company's server; the following is observed:
Code:
My company just keeps saying "open port 1723 + 47". But as I stated above; I have opened them. And Internet searches have revealed absolutely nothing. At this point; I am completely lost as to what may be wrong.
When I installed Wicd, and ran it for the first time, I got an error something like: "Could not connect to Wicd's dbus session- check the Wicd log file for more info". However, later when I restarted my computer, Wicd started, but I can't connect to my network, it shows up as <hidden>, I can connect to linksys, so I know that wireless is working on that computer. I know that there's nothing wrong with my wireless router, because I can connect to my network in this computer.
View 3 Replies View Related