What do i have to make to be able to watch a movie in a TTY...? there is this library called AAlib, and there is a slackbuild for it, form osuosl [URL], but besides of this I do not know how it is done...
View 11 Repliesevery time I watch a DivX movie on the internet my system freezes permanently. So I have to restart. I can�t recognize any regularities: it happens in periods of 15, 20 or 30 minutes....
I use:
-F13 with latest updates
-Nvidia 8600M GT with nouvau driver
i have set the display to go to sleep after 5 min. but it still goes to sleep when i am watching movie.
how can i stop this, it should only go to sleep when it is ideal, not when i am watching movie
I just installed Ubuntu 10.4 today... but I�ve got a weird problem...
When I want to play an official DVD, Mplayer and VLC start and close down immediately..
When I want to play a movie from my HDD I get this (see attachment) with Mplayer and with VLC..Totem just doesn't want to play it..
but whats really weird is when I make a screenshot using VLC even though the colours are weird the screen shot comes out normal
I'm new to Ubuntu but I installed Ubuntu 11.04 with no problems. I activated the recommended drivers for my laptop. My laptop is: Acer Aspire 7540G with ATI Mobility Radeon HD 4570 video card and AMD Athlon II X2 processor. So the problems comes very very often. I watch videos on fullscreen or I leave them playing in ...... While playin a video the laptop just freezes. Everything stops working. I think this problems comes up may be every 30-40 minutes of watching a movie. I'm not a fan of holding the shut down button for 10 seconds every 40 minutes so I'll be very grateful if someone helps. I've removed Syn to Vblank from the CompizConfig because otherwise Ubuntu runs really slow on my computer and the videos are playing very slow and with very bad quality. When i removed it everything began to run faster but now I've this problem with the freezing... Any ideas ?
View 5 Replies View Relatedi have for pc connect to my hdtv and sometimes it blinks alot.it like someone is changing the channel. it does it the most when i'm watch a video in movie player. i thought it was just movie player but it does it when vlc player too. oh and it does it too with the nvidia drive on way more.
View 4 Replies View RelatedIs there any way to position subtitles in Totem in a bottom on the black border of the 16:9 movie when showing in the full screen of 4:3 monitor?Or not necessarely in fullscreen, but in a window where black borders are on the top and underneath the actual video frames.
Now always the subtitles covers part of the video on the bottom, which is a shame as there would be empty space underneath also.
The same question for VLC.
Subtitles, would be in the external file.
And I am not looking a solution which would need transencoding the video file.
btw, for GNOME Mplayer, the solution is to put "-vf expand=:-100::2" into Edit/Preferences/Mplayer/Extra_options_to_Mplayer
when I'm traying to watch 720p and 1080p movies, MKV format. The movie is breaking all time, do I need to install any codecs or extansions, or use another application.I tried VLC player, and it is same. Well i had same problem with Ubuntu 10.10 and could't fix it.
View 2 Replies View RelatedIs there a way to run a short mplayer ascii video clip after the boot messages?I've got some video of a shark that I can play with the mplayer ascii feature (mplayer -vo aa -monitorpixelaspect 0.5 file.avi)
View 3 Replies View RelatedI'm stuck with the problem of amarok refusing to play songs that have any non-ascii characters in the metadata, which is about 1/3 of my collection.A solution to that problem would be ideal, but if there is a good alternative (like amarok 1.x series) I would probably switch.
View 5 Replies View RelatedI have been trying out the new Slackware 13.37 and I have found that KDE will crash anytime I am watching a full screen video with Firefox 4 and attempt to adjust the audio levels using the keyboard buttons. If I use the mouse to adjust the audio level through the audio mixer gui, it seems to work fine. Both of my laptops ( a Gateway MP6954 and a Dell Inspiron 1520) are exhibiting this same problem. Both have the Adobe Flash Player version 10.2.159.1 installed.
View 1 Replies View RelatedKernel 2.6.21.5, GNU (slackware 12.0).
KDE 3.5.7.
MPlayer 1.0rc2-4.1.2.
I have a .avi file on the hard (really on a cd-rom, but it's just the same). Being in the GUI (KDE), I do Main Menu>Run Command and then, in the dialog box, I enter 'gmplayer foo.avi'. Gmplayer starts, the picture of a small console is seen on the screen, and the audio from the movie is heard. Just as if I had inserted the CD into a stand alone dvd player but I could not see the image. I compiled and installed mplayer (with GUI support) from the slackbuilds.org sources and script for slackware 12.0, which is the slack version installed in my machine. If I open a terminal (in the GUI) and run gmplayer there I get this:
Code:
VIDEOOUT: [VO_XV] It seems there is no Xvideo support for your video card available.
[VO_XV] Run 'xvinfo' to verify its Xv support and read
[VO_XV] DOCS/HTML/en/video.html#xv!
[VO_XV] See 'mplayer -vo help' for other (non-xv) video out drivers.
[VO_XV] Try -vo x11.
CPLAYER: Error opening/initializing the selected video_out (-vo) device.
I know I could do what is suggested by gmplayer but, before that, perhaps I am simply invoking gmplayer in the wrong way. That is: there are at least to ways: using the Run Command dialog box and opening a terminal and running as a cli command.
After experimenting with version 6.0 of ffmpeg there were a few issues i was not totally happy with, so i decided to downgrade back to the 2008 build of ffmpeg.However now whenever i encode a libxvid/libmp3lame movie with ffmpeg (using the exact same settings I have always used), the output created .avi file is reported by KDE as having:
Quote:
Audio Codec: none
This is truly odd (and quite annoying) as the .avi movie plays correctly with sound on both Smplayer and Kaffeine, so i don't think it is a codec issue, but it just does not display the correct audio codec tag anymore. how the metabar properties are controlled in KDE?, or if there is a config that I can adjust to make the new created output .avi's report the Audio Codec correctly as 'mp3'? (like it used to).Also, does anyone know if ffmpeg 6.0 may have left some files behind on my system that is causing this sudden odd behavior?
when i try to watch a movie on movie player from the internet i get the requires a Advanced Streaming Format (ASF) demuxer plugin which is not installed. how do i install it?
View 3 Replies View RelatedEvery time I use Movie Pllayer to play DVD movie, it just hang on there and not responding,so I must click the 'Force Quit' button to close it.What should I do to overcome this problem? Is there any other software which can play DVD movie?
View 2 Replies View RelatedAnyone know a working movie player? I can't use Movie Player to play my movie because it's talking about plugin BS. Now I try loading the disc with VLC media Player and the crap just closes out.
View 6 Replies View RelatedThis is weird, and I never noticed before, but now I have an application that is borking on weird things like when /etc/hosts is of one file format or another, and I don't even know the difference between the two (google doesn't tell much either). on CentOS 5.5/5.6 x86_64: a which on the following is an interesting tell:
vi = /bin/vi
vim = /usr/bin/vim
both are actually vim version 7.0.237 but sum differently, and although they are both actually separate executables in the stock installs of CentOS I've been building, on most distros, and older versions of CentOS it seems, vi is usually just a symlink to vim - but again, not in these fresh installs it seems. When I create a file with the 'vi' above, it defaults (usually) to "ASCII text" (but not always) When I create a file with the 'vim' above, it defaults to "ASCII English text" (and causes a particular application I'm working with to bork and barf). It seems the OS is installed by default yielding both file types too, as evidenced by the following:
[Code]...
how i can convert a text to ASCII? >>> ( to encrypt the text ) and how can we use the "hexdump"
View 5 Replies View RelatedHow can I use extended ascii characters, like ALT + 2 + 0 + 0 for instance? I'm using some of those characters for my passwords for online accounts made under MS Windows and it seams I'm unable to use them in Slackware 13. For instance: if I type ALT+2+0+0 in Pidgin there is no character displayed and if I type in the Terminal the same thing, it will replace my shell prompter (sasser@HOSTA:~$) with (arg: 200):
sasser@HOSTA:~$
(arg: 200)
How can I filter ASCII quotes( ' ) and double quotes ( " ) so that I can replace them with the UTF-8 equivalent?If I copy text from a Word Document(ASCII), and upload it to a web page with PHP. The Database(UTF-8) will replace these racters with incorrect character(s).I need some function that will replace these characters but I don't know how to differentiate the ASCII quotes and the UTF-8 Quotes without (somehow) converting the string to hex, then preg_replace'ing the hex code for the symbol.
View 8 Replies View RelatedWell, I have a web application in Linux server. All my Java codes are there. FYI, whenever user entered non-ASCII characters(e.g. ∞,�,�) in a text field in my web application, and I check the log of my Java code in Linux server, it returns weird characters.
Suppose user entered ∞ in the text field. I should get ∞ in my log too. However, I got weird characters in return.
i want to print all ASCII characters kind of like a table, but i really don't have an idea of how to do it, i don't know if there is a built-in method or something to accomplish this, if not
View 2 Replies View RelatedI'm working on a Qt program and when it gets to the following line of code I get a seg fault:
QString blah = QString::fromAscii(entry->d_name, 256);
entry->d_name is a 256 byte character array returned by readdir(), I would expect this line of code to convert that character array from ascii to a QString, but I get a seg fault and I'm not entirely sure why..
I need to be able to convert a unicode file to ascii using red hat.
View 1 Replies View RelatedI'm trying to get mplayer to play videos in ASCII, but I get an error... I don't know why. It works fine on my desktop, but my laptop is outputting an error...
This is the command:
Code:
mplayer -vo aa video.flv
This is the error I get:
Quote:
MPlayer SVN-r29800-4.4.2 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
[Code].....
[URL] under Fedora 14 - Bash:
$ cat asdf | iconv -c -t ASCII
<a href="http://www.net-security.org/secworld.php?id=10607">biometric cabinet lock detects life in the finger</a>
ASDF
$
[Code]...
But theres no iconv under OpenWrt. Are there other working methods to convert a piped ( "|" ) text to only ascii format (under OpenWrt 10.03)?
Say you wanted to write a bash script for "hello world" but the characters were shifted up or down by one.
How would one go about this?
Example:
Code:
Code:
I am working on a project where I am dialing out of a modem!! Old stuff, ya, but the modem allows my device send info from remote sites from my datibase through a phone line so that this IT departments dont have to worry my device being a security issue on their networks.
Any way, the modem I'm using isn't incredibly well designed, and when a certain ascii char is read by the modem, it reads it as an EOF indicator. It is also important that the files I send are compressed.
My question is: Does anyone know of a compression format that allows ME to dissallow IT's use of certain ascii chars?
just as an illustration:
Device --------> Modem ---------> Off-site
and the Modem stops talking to the device when a certain char is passed to it.
I am trying to download a EBCDIC file from z/Os to UNIX using FTP in ASCII mode. The problem I am seeing is; when UNIX FTP Client issues a get; UNIX CPU goes to 100% CPU utilization when transferring a file in ASCII mode. I have done packet traces using wireshark and noted that z/OS Server is translating the file to ASCII before putting it on the wire, however when UNIX FTP Client gets the file I believe that the UNIX FTP Client is again translating the file to ASCII causing the 100% CPU utilization. I need verification that this is what is happening, and is there a way of getting around this other then transferring the file in binary mode then doing a EBCDIC
View 1 Replies View RelatedI just uploaded JPG pics from a Win XP, through shell, on my FTP.When I downloaded them back (to a UNIX machine), they were all currupted and unreadable !After some researches, I found that Win XP's shell works by default in ASCII mode.
View 3 Replies View Related