Slackware :: SDL "XDM Authorization Key Matches An Existing Client?

May 25, 2011

After having recompiled libmixmod and then recompiled SDL_Mixer to get support for certain music formats I now find myself unable to start a lot of SDL programs that were previously working perfectly fine -- even some programs that do not use any sound functionality at all will not work.I get the following error when I attempt to execute my project which was previously working fine:"XDM authorization key matches an existing client!Error: Unable to init SDL: Couldn't open X11 display"I also get the same error when I try to execute a lot of other programs, many of them not my own. It seems that the error is not caused by using SDL_Mixer either, as some pure graphics demos without any audio functionality also give me this message, and when I removed all audio features from my program to try to isolate the issue it still gave that error upon execution

View 7 Replies


ADVERTISEMENT

Slackware :: Connection In Various Native Games (13.1 32-bit) - Can't Join Multiplayer Matches

Jan 22, 2011

in the LQ Forums i am experiencing a few connection issues under Slackware 13.1 and came here after lots of searching, and unsuccessful fixes so here it is.

- Problem: I can't join multiplayer matches in various games (Running natively in Linux) some of these are: Open Arena, Urban Terror, Cube 2: Sauerbraten, Quake Live and Planeshift.

- What i did: I tried joining multiplayer matches in these (and a few other) games without success, i get the server list, it says it is connecting and in most of these i get the message: Awaiting Gamestate (except for Planeshift which just fails and Cube 2 that doesn't show anything). Didn't find a fix in the internet and tried some possible ones without success. I even tried forwarding ports on my router/modem, turning on and off UPnP, setting up a firewall and nothing.

- Exceptions: I tried one of these games in my Windows XP 32-bit boot and the same game (Urban Terror) worked, same version number (but the native Windows version) and i could play without lag and any other issue. Cube 2: Sauerbraten manages to connect and lets me play (under Slack) but only on some servers maybe a port or authentication problem i guess. As said the only message is Awaiting Gamestate in every game except for Cube 2 that doesn't show anything and just doesn't connects and Planeshift that says it wasn't able to reach the server. This Slackware install is pretty fresh i installed it day 1 of January 2011 with the additional packages during the installation and the only firewall which i set up today was a IPTABLES one generated here but the issues are present since the day i installed Slack (but only in it) the problem persists with and without the firewall.

As far as i remember i didn't have these issues when i installed Ubuntu so i guess it's a configuration that's lacking. I am connected to the internet through a router (with wireless enabled for my notebook) with a cable (eth0), DHCP, Dynamic IP. - Notes: I installed the PCMCIA thing during the installation and i CAN use the internet (browsing, pidgin, e-mail, .....) normally. Sorry if i wrote too much i tried to give as much information as possible and sorry for any grammar errors, English is not my first language.

View 16 Replies View Related

Slackware :: Unable To Gain Authorization For Org.kde.kcontrol.kcmkdm.save (KDE 4.6.3)

May 19, 2011

Im running KDE 4.6.3 build from source. Everything works, but when going to system-settings, trying to change some stuff at Login Manager, for example AutoLogin to enabled, I get the following error:

Code:

polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action org.kde.kcontrol.kcmkdm.save for unix-process:21517:43051441 [/usr/bin/systemsettings -caption System Settings --icon preferences-system] (owned by unix-user:robert)

I get the prompt to authenticate with a user, and of course I get user root and user robert, but when I select user root, it automatically closes with error: Unable to authenticate/execute the action: (code 4) and then of course I get the above error in /var/log/messages. I know this issue is somehow related to polit setup and/or KDE, but can't figure out what. Please if someone has some ideas, let me know

NOTE: The system is slackware-current, 32bits.

View 3 Replies View Related

Networking :: Connect To The Client Using The Already Existing Ssh Connection?

Mar 22, 2011

I was wondering if there was a way to connect over ssh "backwards". For example, lets say there's a client connected to example.com via ssh from behind a router. Well you wouldn't be able to ssh to that client unless the proper ports were forwarded on the router right? So I'm wondering if there would be a way to connect to example.com through ssh then from there connect to the client using the already existing ssh connection.

View 4 Replies View Related

Slackware :: Use Existing Swap Instead Of Creating A New One

Dec 22, 2009

Slackware 13.0, about to install it. I do have an existing Ubuntu installation with a roomy 5 GB of swap.

In the installer of Slackware, what should I do to use this swap?

View 5 Replies View Related

Slackware :: Unable To Upgrade Existing Packages Or Install New Ones?

Mar 23, 2011

I have a brand new Slackware 13.1 x64 installation, and I'm having problems with slapt-get.

I'm unable to upgrade existing packages or install new ones. The output in terminal is:

Code:
bash-4.1# slapt-get -i tar
Reading Package Lists... Done
The following NEW packages will be installed:
tar

[Code]....

Worth mentioning also, I managed to install Gnome from [URL] without any problems immediately prior to this error message starting to appear.

I've been using Debian and Ubuntu derivatives for the last couple of years, so I'm comfortable using the terminal and possibly doing some more advanced stuff.

View 4 Replies View Related

Slackware :: GLib-GObject-WARNING **: Cannot Register Existing Type `_PolkitError'

Dec 29, 2010

This is my slackware 13.1 new installation `.xsession-errors'.

Code:

<stdin>:1:3: error: invalid preprocessing directive #Those
<stdin>:2:3: error: invalid preprocessing directive #or
<stdin>:3:3: error: invalid preprocessing directive #Xft

[code].....

(polkit-gnome-authentication-agent-1:1742): GLib-GObject-WARNING **: cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:1742): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed

View 1 Replies View Related

Slackware :: Message "Error While Trying OAuth!" And Choqok "Authorization Error: Timeout On Server"?

Sep 1, 2010

Since yesterday we need to have oauth authentication to login to Twitter. I have compiled qoauth and then qwit and choqok but I'm not able to use both. I'm having issues with oauth I could'n solve. Qwit gives this message "Error while trying OAuth!" and Choqok "Authorization Error: Timeout on server".

View 11 Replies View Related

Server :: Add Existing Unix User To Existing LDAP?

Jun 23, 2010

I have an existing unix user that some how didnt make it into the copy over to our LDAP server. How do I add an existing unix user to an existing LDAP directory? Will ldapadd work? I was under the impression ldapadd required an ldif file to work properly.

View 7 Replies View Related

Slackware :: Wicd Client Gtk: How To Get Rid Of It

Nov 12, 2010

on my laptops I used to use Wicd with the Gtk GUI. However, now there is a KDE client, which I want to use instead, from now on:

Wicd Client KDE

I installed it, and it works quite well, so far. However, whenever I logon to a KDE session, the older Gtk client is started, too. I then have both Wicd clients sitting next to each other on my panel bar, and I have to manually kill the Gtk client. How do I get rid of the Gtk client in KDE, permanently? BTW, my laptops are running Slackware 13.1 stable with all patches up to now and some additional software from various repositories.

View 10 Replies View Related

Slackware :: Setup For VPN Cisco Client On 12.2

May 6, 2011

I've just installed a vpnagent on my Slackware 12.2. A script running the vpnagent daemon is /etc/rc.d/init.d/vpnagent_init. My network is started with rc.inet1. The queston is at which point during the startup to run "vpnagent_init" script. I thought to add a call to rc.locale.

View 1 Replies View Related

Slackware :: How To Do 'shadow' Session With Freenx Client

Jan 10, 2010

Does anyone know how to do a 'shadow' session with freenx client, qtNX?I don't see any options in that particular client to 'attach' or 'shadow' a current X11 session. Does anyone have a slackbuild for nomachines NX client?

View 2 Replies View Related

Slackware :: Install Ubuntu9.10 On A Client Which Insist On Tcp Using Nfs?

Feb 12, 2010

I'm tring to setup a PXE environment. The host is my home server runing slackware 11.0. I cant get NFS use tcp.I don't even know wheter it's possible or not. I need tcp because I tried to install ubuntu9.10 on a client which insist on tcp using nfs.

View 2 Replies View Related

Slackware :: Stable Torrent Client With Maximum Encryption?

Sep 4, 2010

I use rtorrent in slackware. I already tried to use deluge 1.2.3 and even 1.3rc1 and 1.3rc2 but I find them a little unstable. Witch is your favorite? For lot of torrents and maximum encryption?

View 14 Replies View Related

Slackware :: Torrent Client Setup - JFS File System

May 10, 2010

I decided to use my old computer for torrent downloads and perhaps for mirroring the slack -current. However, the computer is rather weak: Celeron 1,2Ghz, 256 MB RAM. So, which slack release is better to use? I aim to use the jfs file system, but I'm not sure it is good choice.

View 4 Replies View Related

Slackware :: Torrent Client - Unable To Start Downloading

Mar 26, 2011

I tried every torrent client I could find for linux, and it's getting on my nerves, neither of them want to start downloading anything, what can I do?

View 11 Replies View Related

Fedora :: Password Could Not Matches (login)?

Jul 2, 2010

using fedora 12. I got a problem while trying to login both as root and general user.message was " password could not mathes"then I tried to change the root password by booting as runlevel 1 and it worked f9 and I could able to login,but now suddenly the same problem arises again,. the solution worked for 1 day.I am sure tha am giving the correct password, so I thik there is some other problem.

View 3 Replies View Related

OpenSUSE Install :: No Devices Matches MBR Identifier

Nov 9, 2010

I've made a bootable USB with 10.3 live CD. I can boot successfully using a 10.3 live CD as long as the USB stick is not plugged in, but if I try to boot from the USB stick, or from the CD when the USB stick is plugged in, I get "No devices matches MBR identifier: !" where the bit after the colon is 2 spaces followed by the exclamation mark. I've seen this message reported elsewhere but never with a blank for the MBR id.I'm running on a Dell Insprion 9100 with 1.5G RAM.

View 2 Replies View Related

Ubuntu :: How To Mount NTFS On Virtual Box - No Matches

Mar 14, 2009

My Host OS is XP and I am running Ubuntu on Virtualbox. Trred a readwrite and graphic method to mount NTFS but no matches, permission denied. It's not possible to mount NTFS using Ubuntu on Virtual box?

View 7 Replies View Related

Server :: REGEX From Array, Returns No Matches?

Jun 23, 2010

I'm attempting to use REGEX to isolate media (video and audio) essence that relate to alias/reference Quicktime movies. The Quicktime movie filename (excluding ".mov" can always be found in the media-essence filename.Stages of my process are:I cache the contents of a text file into an array ($file). This text file/array contains a list of Quicktime movies and media essence. Essence for each Quicktime movie is contained in this text file. An example text file is below:

Code:
MOVIE1.mov
media.dir/MOVIE1.m2v

[code]....

View 2 Replies View Related

Software :: Unable To Find A Thread That Matches?

Aug 24, 2010

I'm not able to find a thread that matches my problem. It must be a software/hardware bug, because sound works normally on a 2nd computer running the same Debian version (lenny), and it also work on the 1st computer running Debian (squeeze). - In fact the sound was working on the 1st computer in one installation of Debian lenny, but not on a 2nd (same) installation on the same computer. - Given that I had fiddled with its settings (for a different reason), and couln't fix it, I decided that the software had now a bug, deleted everything on the partition and cloned the working Linux on it. It had the same problem, so old me thougth that I had a virus in the MBR and wrote zeros all over the H/D; I then checked that the MBR (512 bytes) consisted just of zeros, and reinstalled vista, Debian lenny and Debian squeeze on the totally clean drive. The problem is still there also on a 2nd lenny installation that I tried, but squeeze works well. It's possible that the lenny installation that was previously working, was doing so due to the magic of Debian-update, but I don't know. The guilty computer is a Compaq SR5760AN (mobo pegatron violet M2N78-LA) with nVidia 0774 chipset and realtek HDA integrated audio. If it's relevant, the DVD drive is HL-DT-ST DVD-RAM GH15L, video is Radeon HD3450, and CPU is AMD Phenom 9650 quad core.If I use alsaconf, it comes up with 'snd-hda-intel' but there seem not to be any intel chip on the machine, and squeeze works and lenny DID also work.

View 1 Replies View Related

Programming :: Sed -n '/pattern/{n;p;}' Is Missing Matches In File?

Jun 16, 2011

I have an interesting problem, sed '/pattern/{n;p;}' file, doesn't seem to be catching all of the matches in my file. As an example of this see below.test:

Turn
Turn
Turn

[code]....

View 5 Replies View Related

Slackware :: Broadcasted Network (ssid) Is Showing As Hidden (wicd-client)?

Aug 3, 2010

using ndiswrapper for a usbwlan device. Configured and modprobe ndiswrapper confirmed working. When I 'iwlist wlan0 scan'I get cell (wifi network) profiles including my own and several of the neighbours - all showing ssid name and whether key managed or not. When I 'wicd-client' this shows my network as hidden. What makes it even stranger is that wicd-client shows all the neighbours network ssid. Check to see if my router is broadcasting ssid and is without a doubt. I have tried to connect to my router via CLI commands (iwconfig) but unable to connect as is wicd-client - will update with log files on this soon.

View 5 Replies View Related

Slackware :: Errors - Warning: Unsupported SASL Client Implementation: Cyrus

Mar 17, 2010

My problem is to get postfix working with a smarthost, to send mails from home with dynamic IP, and which needs authentication. I did exactly the same with Slackware 12.2 (postfix 2.6.2) and it worked. Now I tried to do with 2.6.2 (actual running version is 2.7.0 with the same problem) on Slackware 13 64bit. Following error message occurs around every minute in the maillog:

[code]...

View 2 Replies View Related

Fedora :: Gnome Package Kit Authorization?

Jun 4, 2010

I'm having issues with the gnome-packagekit not working as a user. It runs fine as root but I don't want to have to login each time to run it.

The gnome-packagekit used to ask for root password but has stopped doing so. Anyone remember or have a fix for this?

The cancel button does not work either, I need to close with the X for the window...

It now gives this error.. Authorization Failed You have failed to provide correct authentication

View 7 Replies View Related

Fedora :: CUPS Admin Authorization?

Apr 6, 2011

I just discovered that using the web interface to CUPS on my localhost I cannot apparently, authenticate. The dialog pops up, but will not accept my root user name or any other. I tried using lppasswd to create add root, but it just keeps failing. Don't remember having this problem with F12, but I recently upgraded to F14...

View 2 Replies View Related

Ubuntu :: Authorization Failure On Maverick / Fix It?

May 9, 2011

I'm trying to run update manager and when I try to update applications the authorization box shakes, says Authorization Failure then goes away. Same thing happens when I try to change my login settings.

This is a new problem, I haven't done anything to my system since I upgraded to 10.10.

how can i fix it?

View 1 Replies View Related

CentOS 5 :: GDM Could Not Write Authorization File

Dec 22, 2009

On Monday i had Centos 5.3 with / and /home in ext3, with no problems (at least i don't remember any problem).But as I decided to use XFS (I have a SSD , and i use a 3D Modeling software called Maya , that it's quite sure it could take advantage of use XFS), i decided to create in my new Solid State Disk , that i recently bought , a swap , a / partition formated in XFS , and a /home partition in XFS too.Then I used a Live cd to copy the contents from the old HDD to the new SSD , using find and Rsync --> (cd /mnt/oldroot/ ; find . -xdev -print0 | rsync -avHx --exclude-from /mnt/rsync-filter . /mnt/newroot/)

Once done , i edited fstab,Menu.lst , install grub in the MBR and i had to use mkinitrd to load the XFS.ko so be able to boot with the new system.All worked fine , although i only could log with the root , my normal user could not log , and a error appeared : GDM could not write your authorization file.This could mean that you are out of disk space or that your home directory could not be opened for writing.In any case it is not possible to login. Contact system administrator.But i remember that prior to Copy all to the new SSD , and use XFS , all was fine, and i was able to log with my user.

So thinking that perhaps the copy did by Rsync was not ok , or something i decided to reinstall Centos, now in a partition in my SSD and try another time , but without using a /home partition neither a normal user ,only using root.The SSD had a Swap , a 32 GB XFS partition and the / of the new Install in ext3 (20 GB ).Once installed Centos 5.3 , I updated only Glibc , yum and Python packages (like said in Centos 5.4 Release notes recommends , but not doing the final yum update)Then i updated only the kernel , to have a XFS supported Kernel , and then i rebooted (I would update all once migrated to xfs)

View 6 Replies View Related

Debian Programming :: Check If Login Password Matches What Have Specified

Feb 26, 2014

I'm trying to create a program that will go through a list (one word at each line) from the file pwdlst.txt and try to log-in with the passwords entered in the file. When the program tries with a password that matches the current one, the program will stop and print out "The password is: %s" % password. This is what I created so far:

Code: Select allimport urllib
import urllib2
import cookielib

[code]...

get the error and print when the log-in attempt is deniedgo through the list (pwdlst.txt) and try each password one at a timestop the program when the password matches

View 2 Replies View Related

CentOS 5 :: Get The Source Of Vsftpd That Matches The Binary Distribution?

Aug 3, 2009

When I do a yum or an initial load of vsftpd, I get binary that works. I got the source file "vsftpd-2.0.5-12.el5_3.1.src.rpm" from [URL] to make a change to add chown_upload_mode to version 2.0.5

With no changes to the source, the program works but does not respond to the service command properly. See [URL]

How do I get the source of vsftpd that matches the binary distribution?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved