I know, I know Pat and crew deserve a break after a long dev cycle, but I got hooked on -current moving, so sue me . I was just wondering how long does it usually take before current starts moving again after a release?
View 5 RepliesI currently have a server that is running on the Linux kernel 2.6.18-128.7.1.el5xen and I was wondering if it was possible to upgrade it to a new official Red Hat non-xen kernel(currently 2.6.37.1).What is unique about this kernel is that it is NOT a virtual system kernel but an older XEN kernel with proprietary material removed.If it is possible I was wondering about any repercussions that may occur as a result of said update. This would include, any issues with potential data/driver losses as well as recovery procedures that may be used if something would happen to it during the upgrade.
View 2 Replies View RelatedI installed Ubuntu 10.04 beta a couple of days back.This is the first time I am using a beta release.Some programs are crashing, although not frequently.
My question is - WHEN THE FINAL VERSION OF UBUNTU 10.04 IS AVAILABLE FOR DOWNLOAD, IS IT MANDATORY TO DOWNLOAD THE ENTIRE ? OR WILL UPDATING OR UPGRADING VIA THE system ---- administration --- update manager will upgrade my current beta version to the final release ???
How does the relationship of release of Slackware relate to hardware capability of a PC?
What I mean to ask is, in general, I presume a 10 year old PC is likely to have difficulty running 13.37 and might be better off with an earlier release or am I wrong? My current PC is 5 years old and has an AMD Athlon 64 X2 Dual-Core 3800 processor and 2MB of RAM. It manages fine with Slackware 64 13.0. I have installed 13.37 on another partition but not decided whether to move to it or not. One thing I was wondering was - is 13.37 more demanding of resources for my ageing PC or could it be on the contrary - the newer kernel is actually more efficient and and less demanding of resources?
after 3 failure install gnome slackbuild (GSB) im try install with kde i dont like kde but there is no escape my kde lock like windows 98 [URL]..
Q1 - How to update to the last release ??
Q2 how to install last release of xfce and run it ??
Q3 - how to update all system ??
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies View Relatedslackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies View RelatedFirst time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
Is there any provision for the release of slack13.1?
View 14 Replies View Relatedafter update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies View RelatedI've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies View RelatedI've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies View RelatedI use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
The excludes.txt is
Quote:
slackware64/e
slackware64/f
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
[code]...
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies View RelatedThis is not an earth-shattering issue, but, something I've recently noticed with the Chatzilla add-on for Seamonkey in Slackware-current. Maybe it is just my problem.If I add Chatzilla to FF 4.0 everything works as expected, that is, when I launch Chatzilla the default start-up window shows up with a list of IRC servers to click on (freenode being my favourite).
However,when I click on Chatzilla in Seamonkey I get a blank window that shows up, there is no server list. I noticed that the window in Chatzilla went blank for Seamonkey recently after a -current update (maybe a library issue?)
I'm very keen on getting Mumble installed on my slackware -current 64 bit install. I found a slackbuild script for 12.2 here, but changing the version number resulted in failure. I also tried following the build instructions on the Mumble website, which failed with the following.
Code:
neil@slackbox:~/Downloads/mumble/mumble-1.2.2$ qmake -recursive main.pro
Reading /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
[Code]...
I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies View Relatedi just updated my slackware to current, and every time i try to log in in my kde session my desktop is upside down.i mean literally everything is upside down, the only way i can have a usable desktop is with the "fail-safe session" of kde option on kdm which is what i'm using right now.does anybody know how can i solve this?i would post a snapshot of the upside down desktop but i can't do anything when i'm using it. fonts, windows, panels, icons everything is upside down..i solved this, just reinstalled the nvidia drivers and everything is goood again
View 1 Replies View RelatedI'm running slackware-current in a virtual machine on virtualbox 4, 512 mb ram, 1gb swap.Everything works fine, except the x11 mouse. Xfce will start up fine, and show the 'tips and tricks' dialog, and then freeze. I can't change to a TTY, or click. The mouse moves, but doesn't click.
View 13 Replies View RelatedThis is the error that the update manager kicks out. I am an running a pretty fresh install, hickup free until now using 10.10, Dual Boot with Win 7 (rarely used) and my internet connection is working flawlessly otherwise.
W:Failed to fetch [URL]... 404 Not Found, W:Failed to fetch URL]... 404 Not Foud, E:Some index files failed to download, they have been ignored, or old ones used instead.
Slackware 13.37, tested on 2 different PC;
affected: mousepad and tcl/tk applications
I am using mousepad and tcl/tk application to view text files with long lines. Sometimes ago I found that some characters (part of line) in long lines disappear. The problem is shown on a very small video. [URL]
It takes an awfully long time to delete a file when deleting it though one of the KDE programs, like kdevelop or konqueror file manager.
Deleting files with rm works fine. I suspect it has to do with KDE recycling bin mechanics which I know nothing about. I am running fluxbox wm if that matters.
I've installed Debian squeeze using the net installer and while beginning the installation I loaded the 'ppp-udeb' module to connect to the internet for accessing the Debian mirrors during the installation. Now, whenever I boot into Debian, internet connection kicks in automatically. I would want to have control over when to start the internet connection. I don't want it to be triggered during my login.
View 2 Replies View Related1st Problem:The problem that I am having is for Ubuntu 10.10. When logging in for some reason it will:1. Login and play the Ubuntu login sound.2. Will start loading the desktop and panels.Right after #2 it goes black and kicks back to the login screen. I am not sure what to do since it constantly does this. It renders the computer useless if I cannot get passed the login page. Yes the username and password are correct.2nd Problem:Before this 1st problem occurred this has also been a problem that has not went away.When I used to be able to login to the desktop I have just the panel on the top of the screen with the traditional Ubuntu "start menu", "system", etc. For some reason the right side which is the other half of the panel will not load. The only solution which fixes it while I am on the current session is to right click the panel and click Minimize/Expand button which toggles to center the panel on the top of the screen. Now when I click Expand its like the problem never happend, but this only fixes it for that session.
View 9 Replies View Relatedjust start Ubuntu 9.04 said: File system chek failed a long is beging saved /var/long/fsck/checkfs if that location is writable Please repair the file systmen manually A maintenance shell will now be started Ctr+ D terminate this shell and resume system boot. Give root password for maintenance or type Control +D to continue. I did Ctr+D , and after login said , that can not find /home. I starte with the live cd:
[Code]....
I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
Saw this Post on LWN this morning:
[URL]
I wonder if it would make sense for Pat and the team to bump the Kernel from 2.6.37.5 to 2.6.38.2 (or 2.6.38.?) before 13.37 is released ?
I'm looking for a good IDE for C/C++, that runs well in slackware. I used CodeBlocks, but I can't compile in the current, and its getting a little old. I see a lot of threads talking about anjunta and kdedeveloper, but I don't like these.
View 14 Replies View Related