Slackware :: Takes A Long Time To Delete A File?

Mar 6, 2010

It takes an awfully long time to delete a file when deleting it though one of the KDE programs, like kdevelop or konqueror file manager.

Deleting files with rm works fine. I suspect it has to do with KDE recycling bin mechanics which I know nothing about. I am running fluxbox wm if that matters.

View 7 Replies


ADVERTISEMENT

CentOS 5 :: X/Gnome Takes Long Time To Load And Sudo Takes Long Time To Execute

Oct 13, 2009

I am running Centos 5.3. I ran no updates, performed no installs, nor changed any configuration immediately prior to this issue. My problem is this: when I run the command startx (default runlevel 3), it is a long time (5-10 minutes) before Gnome startx, and once it does start applications will not run. Also, when I try to use sudo (from any environment, even ssh), it is a long time (5-10) before the command is executed.

I cannot say for sure, but it seems like this is an intermittent problem. Sometimes X takes a long time to start, but once it starts it will launch programs. Sometimes X takes a long time to launch, but once it starts it will only launch certain programs. Though presently X always takes a long time to start, and I cannot successfully launch any programs.

A while back a had a similar problem to this (x taking long time to start, sudo taking long time to execute) and it ended up being a DNS problem. Unfortunately, I cannot remember exactly what it was and I stupidly did not document it. Maybe this is also DNS related, I don't know.

I don't know what log files to look at for problems with X, Gnome, and sudo taking a long time to start.

View 19 Replies View Related

Ubuntu :: File Properties Takes A Long Time To Open

May 6, 2010

I have a newly installed Kubuntu 10.04 running here, works fine except for one thing.

I have a kind of "fileserver" and it has a samba share that I have mounted in the home folder of my desktop computer ("/home/xxx/fileserver", the server is running an older version of Ubuntu, can't exactly remember what it is but the filesystem is ext2, if that's of any importance).

I have large files on the server, mostly video. When I use Dolphin (or Konqueror, doesn't make any difference) and right click one of these large files and choose Properties, it takes a LONG time to load the properties window. As if it copies the file to local hd before opening properties, or something.

The reason why I posted here and not in the networking section is, that I had the exact same setup with my previous installation which was Kubuntu 8.04, and also at least three different Ubuntu's before that. Never had this problem before, so I think my server and networking thingies are okay.

View 1 Replies View Related

Ubuntu :: After Log In Takes Long Time To Show Desktop, Monitor Events At Log In Time?

May 24, 2011

It takes me a while to log in the splash screen just sits there for ages before i get to the desktop. Never used to be this slow and I'm not sure why. Firstly, I'm running Ubuntu 11.04, standard DE. I do have conky starting up in a script but it has the & at the end of the line so I didn't think this would cause it (or is there some special case for log in time on how & is treated?). However as a test I will comment out the line in the script and see if it is the cause.

However just for general knowledge and in case that isn't the problem, how does one go seeing what is happening during the time from when one log's in and the desktop is displayed? Is there some kind of log that shows the date/time that can be enabled or is there a debug mode that can be enabled somehow via special keys or maybe from grub?

View 8 Replies View Related

Ubuntu :: 10.04 Takes A Long Time To Boot Up?

Jul 26, 2010

After I installed a new hard drive, when I booted up into Ubuntu, it would give me this error: "failed command: WRITE DMA". So I tried the workarounds and I guess it just covered the log with the Boot Splash, now it's taking a long time just to boot up.

View 9 Replies View Related

General :: Vim Takes Long Time To Start ?

Feb 23, 2010

I'm having trouble with Vim in any terminal emulator I use. I have a link (vi) to vim. Occasionally it will take very long to load, whether I use 'vi' or 'vi file'. Before, if I could I would restart X, and then it would load instantly again, but I waited this time and it did load, after a minute or so. Is this a problem with X or vim?

View 9 Replies View Related

Ubuntu Installation :: 10.04 Takes A Long Time To Boot Up?

Jul 25, 2010

I have an Acer Aspire 1810TZ laptop with Windows 7 on it. I decided to dual boot w/ Ubuntu 10.04 32-bit Lucid Lynx. I was initially getting this issue

Code:
gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)

[code]....

View 1 Replies View Related

Ubuntu :: Takes A Long Time To Open A Browser ?

May 11, 2011

After upgrading to a 64-bit Ubuntu 11.04, I have found that it takes a lot longer to open any browsers such as Firefox, Google Chrome or Opera. Does anyone know why? I thought 64 bit Ubuntu should be faster than the 32 bit version. Nevertheless, I see no difference besides the browser problem mentioned above.

View 9 Replies View Related

Software :: GRUB2 Takes A Long Time To Load

Jan 5, 2010

I'm running Ubuntu 9.10 and Windows XP on my system. After installing Ubuntu, it boots normally about once, and then the next time I try to boot, I have to wait a few minutes with it saying "GRUB Loading." I have read other threads about this that say that it is clearly a GRUB2 problem, and something about Windows overwriting something with the MBR; although I haven't booted into windows once in the process of installing Ubuntu (multiple times) or afterward. GRUB version 1.97~beta4.

View 10 Replies View Related

Debian Configuration :: Statd Takes Too Long At The Boot Time

Mar 25, 2010

Since recently statd at the boot time takes, more then 30s or even more.

It is laptop configuration, no NFS server(?) lenny with few installs from backports (open office and .30 kernel - for Intel 5300) vmwware (7), as well firestarter firewall

Can I disable it or change the boot order (via sysv-rc-conf ), so I can speed up my boot time?

View 2 Replies View Related

Debian Multimedia :: Xfce Takes A Long Time To Start?

Feb 6, 2010

When I log into an Xfce session, the splash screen indicates the "starting window manager" step with a busy cursor for about 10 seconds or more. Mind you this is a 2.8 GHz Core 2 Duo machine.I have tried logging out, mv-ing ~/.config/xfce4 from a tty console, and logging back in, but the problem persists.I am running Xfce 4.6.1.3 from squeeze.

View 14 Replies View Related

Ubuntu :: Firefox Takes Long Time When There Is No Internet Almost 2min

Jun 21, 2010

Firefox take so long more that 2 min when started and there is no internet is available (i.e. Ethernet cable is unplugged).

I think FF is looking for the connection. How can I make FF ignores this check.

I need this because sometime I am away from my networks and I need FF for local testing for web development.

I am using Ubuntu 10.4

View 7 Replies View Related

Red Hat / Fedora :: 15 Takes A Long Time To Connect With LAN Network (Samba)?

Jun 16, 2011

The Fedora machine acts like print and file server.But the problem, its the conection time.When i start the machine with fedora, takes like five or more minutes to appear in "My network places" in the windows machines, and if the server dont appear, i cant print and browse in the server files with the windows machines.I can browse in the internal network files (Windows folders) from fedora all the time, i have internet conection and with the internal network all the time, but the server just dont appear in the network places in the windows machines when i just start the server.

I check the samba status when i start (in the terminal), and its running.And i have a control program called "Control of Ciber", this program connect with the "Slaves" terminals and the conection appear in the server, but when i just turn on the server, the machines appear offline, and they connect after the same time taken for the server to appear in "My network places" in windows.I dont know if have a relation, but i cant open the share folders of the fedora machine in the windows computers, a error dialog appear (Privileges problem), and i just cant see the files in the folder.I give administrator privileges to everyone in this particular shared folder (Chmod 775), and i put the "Security = share" in the samba file. This issues dont happen in debian or ubuntu with the same configuration

View 1 Replies View Related

CentOS 5 :: Mutt Starts Slowly / Why It Takes Such A Long Time?

May 21, 2010

Now I use mutt to manage the mail list.
But when I start to mutt, it takes a long time (about 1~2 minutes) to
load all the mail list, about 20 thousands mail.
I don't know why it takes such a long time.

View 5 Replies View Related

OpenSUSE Install :: Shutdown Takes Very Long Time - 2 Min - Possibly Due To Network ?

Oct 21, 2010

OS: OpenSuse 11.2 64 bit
Machine: HP 8540p i5 4Gb

Shutting down my machine takes a very long time! Not convenient when one want to pack his laptop (I don't dare to when the fan is still blowing).

Upon shutdown, I press 'esc' and see what's happening. The last commands seem to hang. First, shutting down the network interfaces seem to last long than needed (eth0, pan0, wlan0). Sometimes, it stalls also on "networkmanager disconnecting from DBUS" (or something like this ) (which is the very last command executed). Hmm, I will write the exact command down.

View 1 Replies View Related

Ubuntu Networking :: USB Adapter Takes A Very Long Time To Connect Then Disconnected

Aug 6, 2011

I currently have a Nexxt Lynx 150 Wireless USB adapter attatched to one of my home destops to recieve my wifi signal, however, i have run into a speed bump in terms of getting it connected to my ubuntu 11.04. This adapter works perfectly in windows and on the ubuntu live cd, but, when i install ubuntu to my hard drive and try to connect to my network,

it just takes a very long time, then says, disconnected. My signal is WPA2-Personal protected. Here is a link to the adapter's home page > [URL] It seems to me that this is a driver problem. The cd that my adapter came with has drivers for linux on it, but i havent the slightest clue how to use them.

View 9 Replies View Related

General :: Takes Long Time While Booting - Enabling Swap Space ?

May 9, 2010

While booting Linux it takes ages for 'enabling swap space'

I have allocated swap space twice that of the RAM.

Is there a way to fix it? What should I do to avoid this in the future installs?

View 9 Replies View Related

Ubuntu Installation :: 10.04 Remix Takes Really Long Time To Boot After Auto Update

Jul 12, 2010

I recently broke down in the face of morbid curiosity and clicked that little version update button. it seems to run flawlessly (after i uninstalled the pesky touchpad) but it takes a long time to boot up now. at least a full minute. is this normal?

I will add also that it said my version of grub had been modified (which i dont remember doing, but may have) so i told it to leave the current one in place.

View 2 Replies View Related

Ubuntu :: Slow - Opening A Folder Takes A Long Time To Open Nautilus

Nov 26, 2010

I have been using ubuntu for a while and i like it a lot, im a web developer and i have windows xp installed in virtual box, i moved completely to linux and just use windows to test in ie, it had been a while since i didnt use windows and i had to use in the last few days and noticed how much faster it is, the thing that bothered me the most is when opening folders in the desktop or the recycle bin, in windows its instant, in ubuntu opening a folder takes a long time to open nautilus, is this normal or is my installation bad, any comments are appreciated, i dont want to abandon ubuntu, i really like it but it really bothers me that nautilus is so slow to open.

View 9 Replies View Related

CentOS 5 Server :: Vsftpd - Takes Long Time To Login From Remote Host

Aug 19, 2009

I've setup vsftpd correctly and it's running fine with local users (in the same LAN). However, when remote users wanna login to the server, it takes more than 1 minute to get in. Users do can login from remote. It just took too long. (It prompted for the username and password very fast.) Since the server is behind a router, I did configure the port forwarding for TCP 20-21. The centos version is 5.3. The vsftpd is v2.0.5.

View 6 Replies View Related

Server :: One Of The Website Takes A Very Long Time To Load - No Traffic - Static HTML Pages

May 27, 2010

I am using KVM and created four guest Operating systems on it. The server host is Ubuntu 10.04.I am using 4 websites in a reverse proxy environment. One of our website is running on CentOS VM. Right now there is no traffic on the website static HTML pages. I do not have any clue as why it was taking longer time to be accessed.

View 17 Replies View Related

OpenSUSE Network :: IPv6 Getting A Global Address Takes A Long Time - Possibly Only After Starting A KDE Session

Jul 8, 2011

My ISP offers the service of native IPv6. So my ADSL router provides me with a local and global IPv6 address. However after a reboot it takes minutes to finally see the global address when using "ifconfog eth0". During that time I can't do a ping6 to an external server, which seems logical. So I waited several minutes, but no global address. After that I started a KDE session, went back to the console(<Ctrl>+<Alt>+F1) and now the global address was there. Is this normal behavior or should I file bug report?

View 6 Replies View Related

Server :: Takes Time To Release File Handles - Get Corrupted - Deleted Too

Aug 26, 2010

The app in linux server(CentOS 5.3) uses files from a mount directory(Shared windows directory in read only mode). At the same time, the same file might be edited by user in windows env. We were assuming that as the windows folders are mounted in read-only mode in linux so any change done by user in windows environment would be fail safe i.e. can be safely committed to the file. But when the file concurrently used both by Linux and as well by windows, at some point linux does not release the file handles and the files get corrupted(deleted too). Earlier we were using win2k server and this step was hardly reproducible and win2k was releasing file handles quickly. But with centos, we really had touch time managing files.

View 2 Replies View Related

Programming :: Backupscript Takes Too Long?

Apr 19, 2011

Got some speed problems with my backup script, need to save 250GB data (28 network-shares (20 user homefolders included) - each one gets an own zip; approx. 100'000 files)Backupdata are stored on our nas that is embedded with mount -t cifs -o user,pw //networkadress /yet/another/backup/folderPacking process takes about 60! hours (on an intel xeon 3.0 GHz RHEL4 system) - connected via 100mbit networkzip -r /yet/another/backup/folder/asdf.zip /home/asdf/Is there a way to speed up this whole process? Saving via tar.gz instead of ziping?

View 2 Replies View Related

Fedora Installation :: Formatting Takes Very Long ?

Nov 12, 2010

I booted fedora from an live cd not i have a problem when i want to install fedora formatting is taking vey long its already busy for 1 hour and this is te second time im trying to install fedora does it need to take this long ? I've got an unexpected fault for the second time and pressed debug but nothing is happening keeps formatting.

View 3 Replies View Related

Ubuntu :: Wake Up From Hibernate Takes Too Long?

Jan 16, 2010

I am having a problem with a slow wake up from the hibernate in karmic with gnome.My desktop has 2GB of ram and 4GB of swap.m doing standard hibernate from the menu.Hibernation takes 44s, which I can live with for now. But wake up measured from grub boot menu to unlock dialog takes 2m 47s. I think it's reasonable to expect it to take less than a minute.

View 1 Replies View Related

Ubuntu :: Gnome Menu Bar Takes Long To Appear?

Jun 12, 2010

I am running Ubuntu 10.04 Lucid, and it works perfectly.However, since last week (probably after some update), the gnome menu bar takes much longer to appear when I login. After it appears, it works just fine.To clarify, I turn on the system, login, the desktop background image and icons appear, and only after about 30 seconds the upper and lower gnome menu bars appear (a week ago all of it loaded almost instantly).

View 1 Replies View Related

Ubuntu :: Computer Takes Way Too Long To Boot?

Nov 15, 2010

I recently changed my computer so it would auto boot into Ubuntu, but if I hold down the shift key, I can bring up the GRUB menu so I can choose Windows in the rare times I use it[URL]Anyway, I noticed that when I did that, it actually took longer to boot. I timed it today and it took 45 seconds from the time I pressed the power button to get to the login screen! My friend uses Linux a lot and says even with Ubuntu (which he thinks is "too slow") it shouldn't take that long.

View 1 Replies View Related

Ubuntu :: Shutdown Takes Unusually Long?

May 16, 2011

So as the title says shutdown time takes unusually long. Upwards of 4-6 minutes. I'm used to my linux systems taking about 10 seconds to shutdown, 20 tops. In fact this problem seemed to stem from the natty release because I didn't have this issue with the betas or 10.10....

It seems the longer I use my laptop the longer it takes to shutdown. When I do a quick task like a file backup the shutdown takes 10seconds or so, but if I open up a browser and start surfing for a few hours it takes more like 5 minutes.

View 6 Replies View Related

Ubuntu :: 10.04 Lucid Lynx Takes Too Long To Boot

May 22, 2010

I installed bootchart and uploaded an image of my latest boot on imageshack: [URL] but I do not know really how to interpret it. Bare in mind that I did not use to have this problem while running Karmic...back then the OS started twice as faster as it does now after the update (now it takes at least 75 seconds to boot) .

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved