I do not even know where to begin, and what logs / errors show: I am completely confused in the variables, etc.I can not install PAL Like all successful, and the program to compile, but I can not verify this.I tried premake and one Engine ODE - then I get an error segmentation, when you start paldemo.If I use cmake, then get this:
Code:
...
[ 46%] Built target libpal
[code]....
I'm using Slackware64 with multilib (AlienBob) and i can't compile 32bit programs; 64bit programs do compile (tried helloworld). I read the tutorial and folowed it step by step setting my paths right (32dev.sh) and changing libsuffix="64" to libsufix="" from the slackbuild script.
In the attached config.log in the core test section there is this line that i find interesting
Code...
Why is it reading specs from lib64? code...
I have 2 Slackware installs at home, both tracking -current. When 13.37 is officially released I'm considering changing one of those to remain as "stable" for general family consumption. My question is...when the next release comes, how painless and/or successful is the upgrade process. Yes I know of the detailed upgrade instructions by Pat V, and I know I'd have no difficulty executing them.
View 5 Replies View RelatedI just installed Slack 13.1 x64 on my laptop and set up multilib per Alien Bob's wiki. I even successfully compiled and installed grub afterwards. But, am having big problems trying to compile or install guarddog. On my 1st try, I downloaded guarddog from Slackbuilds and replaced the SlackBuild script with this one which is off a thread in this forum:
Code:
It **appears** to compile, but, no .tgz package is made. I have folders and files under /tmp/SBo.
So, then I went back to SlackBuilds and downloaded this, original, 12.2 SlackBuild file:
Code:
Today, I was trying to compile and install a minecraft mapper with the program "make". I navigated to the directory in terminal and ran make. It found the make file and begins to work, then spits an error and stops. To be specific, this was the error:
Code:
cats4gold@computer:~/Downloads/cartograph-linux$ make
make -C src/
make[1]: Entering directory `/home/cats4gold/Downloads/cartograph-linux/src'
g++ -c -pipe -O2 -Wall main.cpp -o main.o
In file included from main.cpp:16:
[Code]...
it's possible to compile the 2.6.37 kernel patched with the autogroup patch on a Slackware 13.1 system running 2.6.33.4-smp with 2.6.33.4 headers? I just compiled and installed the 2.6.37-autogroup kernel from AUR on my ARCH setup and I like it especially when using firefox with lots of tabs open and other background apps also running. I did notice a speed and smothness difference in my ARCH testing setup with this kernel patch and I can get same results in 13.1??
View 1 Replies View RelatedI've a problem which occurs during the boot process.I'll turn on the machine and Slackware (13) will begin loading. I'll get the "BIOS data check successful message" and then the screen will go black. Nothing happens after that. This doesn't happen every time I boot and other than that, Slackware works fine.I'm guessing it's the video card. Uname and lspci output to follow.
uname -r: 2.6.29.6-smp
lspci -vv:
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM
[code]...
Has anyone successfully installed opensuse (any version) on an xseries 342? (Single 1.13Ghz cpu, 512Mb, 2 x 18.2Gb scsi, Serveraid-4MX raid controller).Any problems? Does it detect the scsi controllers and raid controller? I'm d/ling the serveraid support cd right now. It contains the raid bios and the support files for suse linux enterprise server. Will they work with opensuse? I have opensuse 10.1 on 5 cds. I can't find anywhere to d/l 11.2 in cd isos, only as 1 large dvd iso, which is no good as the 342 only has a cd reader, and it's a pain splitting dvd isos to cd isos.
I'm hoping to turn this old beast into a web server, preferably running LAMP (apache2 etc). I've already got a Poweredge 2550 running Ubuntu 9.4 server, but the IBM is a different kettle of fish, with Ubuntu crashing during install because of their disc naming conventions. I'm hoping opensuse should be ok as the IBM has support for SLED. It's either opensuse or fedora, which I'm not a great fan of.
I just installed lucid, Ubuntu 10.04. The first time I screwed it up by removing the CD to early. Do not remove CD until the tray opens by itself or until the system restarted. The second attempt took only 21 minutes. The only input required from me was the time zone, my name and password. After it restarted I had to right click on the network icon and enter the name of my router (Belkin) and the open "edit connections" and enter the network password. All done.
I did have one questionable moment though. When I clicked on "restart" I got a black screen with this message scrolled all the way down the screen...
"(123.2#####) end request: i/o error, dev sr0, sector 46####".
The pc was froze up, or at least stalled at this point. I hit the reset button and all was well. Is a repair recommended or was that just a technicality that really meant nothing? I intend to continue this thread with updates as I reload all my garbage.
After 8 years of using Mac, which I do enjoy, I decided to jump into the open source community. So I bought a brand new Thinkpad SL510 and installed Ubuntu 10.10 (32 bit) using the entire disk, thus erasing Windows.
The installation process was very easy and the system generally works great. It's fast and I love the interface.
Just encountered one annoying issue which I don't think I should be confronted with, using a freshly installed Unix-based OS: a few times, the system entirely froze. I couldn't move the mouse pointer anymore, the keyboard no longer responded (eg. when hitting Shift Lock the light didn't come on). Waited for several minutes but nothing happened at all. So I had to turn off the computer by pressing and holding the power button.
This has only happened a few times so far, but a few times too many. When it happened, I only had Firefox open, or Firefox and Twinkle. The last time it happened, the screen colours gradually went gray before everything came to a halt.
I am trying to compile a very simple 32-bit program on my 64-bit fedora 12 install, but it won't let me.
I get this error.
I tested it on the school server (64 bit Red Hat Server), and it compiled flawlessly without any warnings. I think I am missing some libraries, but don't know which.
I was using my college's unix server (ubuntu presumably) to compile programs in the laboratory. Now, i have installed Opensuse 11.4 with gnome3. I have installed the Developers pattern, and almost all the packages that looked relevant (which came up when i searched for libgc , gcc, and all). Now, i cant compile a program:
Code:
/*program to test file I/O and getch/putch functionaliny in gcc*/
#include<stdio.h>
int main()
{ FILE *fi;
char ch;
[Code]....
I can't compile a C program form terminal using gcc by Code Blocks 8.02 is able to do so.
Code:
#include<stdio.h>
int main(void)
{
printf("Hello World
[Code]....
im writing from ubuntu i have made a c program and im wondering how can i compile it for being able to run on mac
View 2 Replies View RelatedI followed the steps from the this website [URL]..but after I run: sudo make I got this output:
[Code]...
My Fedora 14 have installed gcc-4.5.1-4.fc14.x86_64,qt-4.7.1-5.fc14.x86_64,
I don't know how to use g++ to compile QT program.
Do I need to set PATH or something else?
System is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.
This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).
My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.
Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.
My computer have Windows XP installed and now I want to install suse 9.0. I insert the boot disk (disk 1) and reboot my machine.Then on the boot option window, I select 'installation'. Then comes the error: cannot find SUSE installation CD. Activating Manual.... Then 'English'-->'English(US)'-->'Installation'. Then comes another error: Cannot mount CD-ROM.
View 2 Replies View RelatedI ran 'sudo apt-get install python', which completed successfully. According to [url, this should have created the directory /usr/lib/python2.6, but I do not see any such directory.
This is causing problems:
I've tried 'apt-get purge python' and then reinstalling but this has not resolved the issue.
from the commend line i went to compile the c program by giving the commend "gcc first.c -o first" but the commend line showing gcc is not found. iam using fedora 13 what can i do to compile the program . the program i used to compile is below
#include<stdio.h>
main()
{
printf("hello word
");
}
Following is the IDL program found on the internet but i dont know how to compile and execute (even dont know can it be done under linux).
Code:
when I try to compile a program that uses SFML with g++, this appears:
Code:
/usr/local/include/SFML/Window/OpenGL.hpp:47:23: fatal error: GL/gl.h: No such file or directory
i am not able to compile my test program which uses gtkmozembed.As i am very new to this, i dont know which are the packages to be installed and how to compile
[Code]...
What are the steps to compile a ns2 program?
View 2 Replies View RelatedI want to cross compile gtk program from linux to arm. I am using ubuntu10.04. How can I cross compile it for arm. I have tried this but this is my output:
root@habesh-laptop:~/habesh/gtk# /root/CodeSourcery/Sourcery_G++_Lite/bin/arm-none-linux-gnueabi-gcc -o trail1 base1.c 'pkg-config --cflags --libs gtk+-2.0'
cc1: warning: include location "/usr/include/gtk-2.0" is unsafe for cross-compilation
cc1: warning: include location "/usr/include/atk-1.0" is unsafe for cross-compilation
cc1: warning: include location "/usr/include/cairo" is unsafe for cross-compilation .....
I have a c program and its related libraries for Linux. But, I need a EXE file to run in windows.
please let me know how to compile the program for windows
I installed Debian Jessie (netinst, daily snapshot) on my Acer Aspire V5-123 laptop in the UEFI mode with the secure boot turned off. everything (network, hardware, partitioning, ...) went smoothly to the last step, but after removing the boot media (USB stick) and rebooting, the firmware could not find the boot device ! The only thing I can think of, is that the EFI boot is not set up properly by Debian installer, but I don't know how to fix it.
View 11 Replies View RelatedI installed Debian Squeeze-testing weekly build today, with CD1 alone. It took 1 Hour 38 minutes to install and configure on my Pentium 4 2.7 Ghz , 1GB ram HP machine. I have some trouble with the installation. Sometimes the desktop just freezes while moving Icons, or opening Xterm. I cannot use Ctrl-Alt-Backspace, OR Ctrl-Alt-Delete keys. I have to physically reboot. Why doesn't Ctrl-Alt-Backspace work on GNOME? Is there a IRC chat for Debian Help and what applications does one use on GNOME for IRC chat?
View 5 Replies View Relatedsince last days I am trying to run a simple c / cpp program using eclipse in my newly installed fedora 13, but every time it says either "program file not specified" or "binary error"
View 10 Replies View RelatedI have used a new header file named curses.h in my program.when i try to compile my program it shows me the following error "No such path or directory".What may be the problem?A part of the program is shown below
#include<unistd.h>
#include<stdlib.h>
#include<curses.h>
[code]...