Ubuntu :: Cups Will Not Allow To Add A Printer
Jun 6, 2010
I'm trying to setup a headless CUPS server, but no matter what I do, I can't add a new printer. Not using the web interface, or the GUI of another computer connected to the CUPS server.I always get to the point shown in the attached screenshot, and then I am asked for a password, which never works. I've practically slaughtered my cupsd.conf, and it now looks like this:
Code:
LogLevel info
# Allow remote access
Port 631
Listen /var/run/cups/cups.sock
[code]....
it looks like the above should tell CUPS to never ever ask for authentication, but as you can see in the second screenshot, it still does!
View 2 Replies
ADVERTISEMENT
Jul 21, 2010
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies
View Related
Dec 15, 2009
I have a wire network connection to a printer over my Lan. It is an HP 3210 All-in-One series. Can someone tell me whether cups is capable of printing to this printer? Or do I need to use HP's drivers (:::shudder::?
View 8 Replies
View Related
Jan 29, 2010
So I have a Zebra S4M label printer that I have managed to get mostly working under CUPS. To make that work, I have the printer upgraded with the latest firmware, CUPS 1.4.1 with its AppArmor profile disabled and the Zebra EPL/ZPL ppd file that's floating about the internet loaded into cups. The printer is connected via USB to the computer, and is set up in cups using ZPL. The computer acts as a print server for other computers, and everything seems to work ok, with one exception. When the printer runs out of paper or runs out of ink ribbon, the printer stops and displays an error on screen, but CUPS never stops. It keeps taking jobs, sends them to the printer and reports that everything is A-OK. It appears at a certain point, the printer's memory gets full and then CUPS sort of hangs.
But it still doesn't display and errors or stop the quque, it just starts this weird behavior where it eats jobs or combines them into one giant job that it just sits on. What I need is for CUPS to know that the printer is out of paper or ribbon and pause the queue until the error status is clear. I know that this printer is communicating its status in some way, as when it's connected to a windows machine, the print queue stops when the paper runs out. How to get CUPS to recognize the printer status so that I'm not losing jobs? I've tried digging through the debug logs but there doesn't seems to be much help there. I do notice that from time to time CUPS says it's discarding "unused printer status changed" and "unused job progress" events but other than that, nothing I see of interest.
View 1 Replies
View Related
Nov 2, 2010
server not exporting CUPS printer?
View 2 Replies
View Related
Aug 2, 2011
My work has switched to Fuji Xerox printers, which up to today I've been able to print to simply by sending a PostScript file to their IP addresses. But as of today printing requires a login. Here are the (Windows) instructions:
"Start>Settings>Printers and Faxes>R-Click on the printer>Properties>Configuration>Accounting>Change the dropdown box �Use Login Name� to �Enter owner name�>Type in your staff ID number in the User ID box e.g. �e*******�>OK>Apply"
how do I apply this to CUPS? Where can I find an owner name in CUPS?
View 1 Replies
View Related
Aug 11, 2011
I cannot navigate my windows network because of a unresolved issue.
see http://ubuntuforums.org/showthread.p...8#post11131098
The workaround is to use the IP address of the computers.
Problem is that CUPS has the printer address with the computer name as opposed to IP addresses.
CUPS will not let me manage the network printer. It asks for a user and password. My sudo name and password dont work.
I think the solution lies in the cups.conf but I am unsure how to fix it so that I can manage the printers.
View 4 Replies
View Related
Oct 15, 2010
Is it possible to setup a printer without cups, most of Linuxes try to setup cups, which is basically for Notworks, but it really doesn't help much with a stand alone and more of nuisance and a hindrance.
View 4 Replies
View Related
Sep 9, 2010
whose still learning the ropes, I've installed a new printer on my Debian (2.26 version, unstable, tho' duly updated ) - a HP Photosmart C4600 ,through CUPS and all [b]seemed[/b] well ... applied /etc/init.d/cups restart.Result: it appears to oblige for a moment then straight back to 'STOP' mode so that I can't even get a test page printed.I'm at a loss to know what the issue might be, except if the message coming up on the CUPS admin page - "Filter "foomatic-rip-hplip" for printer "Printer" not available is of any pertinence: I've tried getting/installing/enabling such but -no joy.s
View 7 Replies
View Related
Apr 21, 2009
I'm trying to get cups-pdf to work. I'm working on adding the virtual printer through http://localhost:631, but when I try it asks for my password. I cannot use root because I have locked it out and currently use sudo with my main account. To make changes using my main user account credentials, do I need to add that account to some "printer admin" group, or something?My sys info, in case it makes a difference:Debian Lenny amd64, Xfce desktop
View 1 Replies
View Related
Jul 2, 2010
Running Debian 5, fairly new install. I have CUPS 1.38 installed. After much work, I got a PPD file for a Dell printer working - albeit not the exact one I need (5330dn), but close enough to work (3100cn). Question: when I look at the list of printers in CUPS, I see a bunch of extra printers that are on the network, but that I didn't add. How do I remove them (ie. I don't want them to be listed)?Going to Administration | Manage Printers shows me a black button named "Delete Printer", but clicking on it gives me an error message of:
Ok, while I'm here, I'll ask 2 other simpler questions:
(2) anyone have the .ppd file for the Dell M5330dn printer? I've spent 90 minutes on the phone w/ the Dell tech support, and those guys are clueless....
(3) I have 4 printers of the same model. the first is working - is there an easy (command line) way of adding the other printers? Ie. can I just copy the /etc/cups/ppd file 3 times, renaming it to my other printer names (and ip addresses)?
View 6 Replies
View Related
Apr 10, 2009
I have a HP Officejet G85 and I just upgraded my system, which included the whole printer subsystem, and lost my printing. I have tried adding it via KDE's print dialog as well as directly via CUPS (localhost:631), to no avail.
I have searched all over the web for a couple of days, and can find similar stuff, but no resolution. I think it may be new (I just upgraded most of my system) in the latest releases of cups/hplip/.etc. Also, after the upgrade my hp-toolbox quit working, telling me I don't have qt4 installed, which I do.
View 2 Replies
View Related
Jan 30, 2009
I am hard time printing to one particular Canon IR8500 printer Red hat.WE are using CUPS to manager around 30 printers.when I try to start the printer from CUPS, it comes back immediately to Printer State: Stopped, accepting jobs..After I delete it and redefine it, the status says Idle, but as soon as I submit a job, the status change to 'Stopped'.
View 4 Replies
View Related
May 13, 2010
Since i upgraded to 10.4 my printer doesnt work. My Canon IP 4200 printer is attached via USB. If i turn it on nothing happens.
I look in the online help it says CUPS isnt running. How do i turn this on? I cant find it.
View 3 Replies
View Related
May 4, 2011
Background: I have a Desktop running Windows 7 Professional that has a Brother HL-2140 laserjet printer attached to it. I can successfully view the Windows 7 shares using SAMBA, but when I choose NETWORK PRINTER > WINDOWS PRINTER via SAMBA > BROWSE, I receive an error "NO PRINT SHARES - There were no print shares found. Please check that the Samba service is marked as trusted in your firewall configuration."
I have no firewall installed, the Windows printer is shared, and before I upgraded to Natty, all worked fine under Ubuntu Maverick. When I run the "testparm" command, I noticed that the line under [printers] states "browseable = No" even though in my smb.conf file it is set to "browseable = yes" (and I have changed/saved this file several times, using "sudo" with the same result).
I would like someone to look over my enclosed settings and see if there is a tweak I need to make in order to browse my Windows 7 shared printer.
[Code]...
View 2 Replies
View Related
Jul 8, 2011
server not exporting CUPS printer?
View 9 Replies
View Related
Aug 5, 2011
I am on Ubuntu 10.04. I had a network printer added, but suddenly now the printer seems to have disappeared. What's more, System->Administration->Printing doesn't allow me to add a new printer.The System->Admin.->Printing troubleshoot said the following:
"The CUPS print spooler does not appear to be running. To correct this, choose System->Administration->Services from the main menu and look for 'cups'". System->Admin.->Services does not exist. Searching on the net led me to believe that /etc/init.d/cups start would start cups for me, but that does not seem to be happening.
View 1 Replies
View Related
Mar 6, 2010
My printer no longer prints anything with exception to the TestPrint page.Any other job I give it, it says is "completed" in the queue, though nothing has printed. Installed cups again, after a complete removal. No change. Heres what troubleshooting gave me:
Code:
D [06/Mar/2010:07:26:01 -0500] cupsdSetBusyState: Dirty files
D [06/Mar/2010:07:26:01 -0500] cupsdReadClient: 12 POST / HTTP/1.1
[code]....
View 2 Replies
View Related
Oct 4, 2010
Does anyone know how to set up an print-to-file-printer with an alternative system to CUPS? The quality suck on CUPS and there's NO solution, at least i didn't found anyone
View 3 Replies
View Related
Oct 19, 2010
I have a Brother DCP585CW and have installed the drivers from Brother and it worked fine on Ubuntu 9.10 on both my desktop and laptop. I have installed 10.04 on both and now the problem. It works fine on the desktop but I get a problem on the laptop. It is a wireless printer and I can print to it but only after I do 2 things each time I reboot the laptop. I have to configure it through cups (http://localhost:631) because it keeps getting set to being connected via USB and letter rather than A4 paper on each boot but the correct setting is:
Code:
Description:DCP585CW Location:Landing Driver:Brother DCP-585CW CUPS v1.1 (color)
Connection:lpd://192.168.1.66/binary_p1 Defaults:job-sheets=none, none media=adobe_A4_8.125x11.5139in
I also have to correct it via System/Administration/Printing and setting A4 and setting it to the default.
View 1 Replies
View Related
Dec 14, 2010
Trying to print from my laptop to friends wireless printer. I see his printer "7600 Series" in Network - File Browser. How do I print to his printer. I have text document. I click on "Print", but only "Print to file comes up".
I did System -> Printing -> Help -> Troubleshoot
Got: CUPS Service Stopped
The CUPS printer spooler does not appear to be running. To correct this choose
system -> Administration -> Services
There is not "Services there"
What to do? Ubuntu 10.04 LTS
View 9 Replies
View Related
Jun 20, 2011
I am probably going to get blasted for this statement which is a result of four days of frustration.There are many people on here who are having problems getting their printers to work with Ubuntu. In my case it is version 10:04. I have been reading and trying fixes for four days. Nothing works.Surely this has got to the attention of the people who know what they are doing and design these programs. I sure don't know how to fix this, along with a lot of other users. We are not being lazy or arrogant. Nothing seems to work.Surely someone in the hierarchy can put in a patch that fixes this problem.The fact that Ubuntu won't print for so many people surely must be a priority inhe development of this software. So, please will one of the program developers fix this problem and send out a patch.
View 8 Replies
View Related
May 12, 2009
I'm working on CUPS server here now, I am new to the whole Fedora area, I'm starting to like it, tackling one service after the other. I have cups, which I don't recall installing but was there guess its a default. So I added a printer on my server, that was on a 10.0.1.1 block, added it as lpd://10.0.1.1/lab3printer. Ok that worked and printed from my server, but my problem is when other machines try to add the printer. I continue getting this problem
Alberto "recoverable: Network host '10.0.11.25' is busy; will retry in 30 seconds..."
On the computer it was added as printer lpd://10.0.11.25/alberto because my server has that IP and printer well named it alberto. I followed what this said with the xined.d [URL].
View 3 Replies
View Related
Mar 23, 2010
I have an HP J6480 "all in one" printer, suse 11.2, hplip, wireless network, the printer only prints when I start the printer que each session using the root user ... where do I find the instructions to setup the printer que in cups or is there a setting in hplip that does this?
View 1 Replies
View Related
Jul 19, 2010
Where is the virtual PDF printer for cups? On debian it is called cups-pdf.
View 3 Replies
View Related
Nov 17, 2010
I am trying to connect a Brother HL-2230 printer over CUPS on an Ubuntu Lucid box. However, when I attempt to add the printer using the web interface (localhost:631/admin) the printer is missing from the page that asks me to choose the driver; however, many other Brother and HL-series printers are listed. My question is, how can I get my printer to appear on the driver list (and yes, I installed the manufacturer's CUPS and LPR drivers)?
View 7 Replies
View Related
May 1, 2010
Can CUPS print to a color printer? And also do I need a GUI running on my computer in order for CUPS to work?
View 1 Replies
View Related
May 14, 2010
When I try to print something there is only some led blinks on printer and nothing is print. I am using drivers from brother(cupswrapper). I am using CUPS 1.3.11. I didn't have any problems on my previous installation of slackware(but I don't know which driver I've used).
View 11 Replies
View Related
Jun 5, 2009
Printing was working without a problem until I had to cancel (rudely by switching the printer off in mid-print). Since then I have been unable to connect, through CUPS, back to the printer.lsusb detects and shows the printer is connected.
Code:
Bus 001 Device 005: ID 04b8:081e Seiko Epson Corp. MFP Composite Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]...
View 2 Replies
View Related
Jan 4, 2011
I am running Slackware 13.1 64bit and the cupsd config is the one pretty much the default. I can connect to it from my browser at http://localhost:631 and play around with the options with no problem. I have been following a previous post on configuring a PDF printer [URL]. I am at the point of using lpadmin on the command line to create the pdf printer with the adobe distiller ppd file. When I try to do so it just hangs and eventually I get a connection timeout. When I do an lpinfo -v I get the same thing. If I try lpinfo -h localhost:631 the request returns immediately with nothing. I tried to create the PDF printer through the cups web ui but I did not get far.
View 2 Replies
View Related
