Server :: Troubleshoot Curropted Grub Configuration In Redhat Enterprice?
Jun 2, 2010How to troubleshoot curropted Grub configuration in Redhat Enterprice Linux 5.
View 2 Replies
ADVERTISEMENT
Server :: Minimum Partition Size Required In Redhat Linux Server For DNS Server Configuration?
May 5, 2011Right now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?
i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB
if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..
Server :: CVS Configuration On Redhat Enterprise ?
May 11, 2009Installation of CVS on Redhat linux
Installing CVS on Redhat Linux Redhat Enterprise 4.0
The following steps give simple steps to install CVS software on Redhat Enterprise Linux 4.0.
1) Download the tarball cvs-1.11.1p1.tar.gz
2) Run "gunzip cvs-1.11.1p1.tar". You will get file called cvs-1.11.1p1.tar.
3) Then extract this file using command
"tar -xvf cvs-1.11.1p1.tar".
4) Then go to directory cvs-1.11.1p1.
5) There you will find a file called INSTALL. Read it once carefully.
6) Now run the command "./configure."
7) Build it using the command "make".
8) Install binaries/documentation using command "make install".
9) Now open file called /etc/services and add the following lines.
Cvspserver 2401/tcp # CVS client/server operations
cvspserver 2401/udp # CVS client/server operations
10) Open file called /etc/xinetd.conf and add the following lines to that file.
service cvspserver
{
Port = 2401
socket_type = stream
protocol = tcp
wait = no
user = root
passenv =
server = /opt/bin/cvs
server_args = --allow-root=/home/cvs -f pserver
env = HOME=/home/cvs
log = /var/log/cvslog
}
11) Space on both sides of = in the above file is a must.
12) Restart xinetd services by running command " services xinted restart "
13) Check whether CVS is running on the port 2401 by using the following command "nmap IP |grep 2401". If the CVS server is running correctly it will give output as "2401/tcp open cvspserver ".
It doesn't output like "2401/tcp open cvspserver"
Server :: Sftp And Ftps Configuration In RedHat?
Mar 8, 2011how to setup ftps & sftp in RHEL 5.4 Server.
View 4 Replies View RelatedServer :: Yum Installation And Configuration In Details On Redhat / Centos 5.0?
Feb 21, 2011yum installation and configuration in details on Redhat / Centos 5.0
View 1 Replies View RelatedServer :: Redhat 4 Unable To Boot Up - Shows Grub Message
Oct 11, 2009I have a redhat 4 on a Hp Proliant server. I did a restart of the server. Now it is not getting to the grub menu. It shows:
Attempting boot from hard drive (C
GRUB GRUB
and it hang there.
I know it has something to do with some controller stuff and I could not figure it out. It used to be working till I reboot.
Debian :: New Squeeze Install Fails To Boot (not Even To Grub) / Troubleshoot This?
Jun 4, 2011I recently purchased a new Lenovo Thinkpad T420i and am having problems installing the latest version of Squeeze from CD. After receiving the laptop, I started it up, configured Windows 7, and confirmed everything is working correctly. Next I went through the Debian installer, which completed successfully. I'll be dual-booting Windows 7 and Debian, so at the partitioning stage I resized my NTFS partition, added a shared VFAT partition, then used the "Guided" install to create my root and swap partitions. My partition layout is code...
I assumed something was wrong with grub, so I booted the CD into rescue mode and chose to reinstall grub onto the Master Boot Record. But nothing changed. Just to experiment, I went into fdisk, deleted all my new partitions (leaving just the Windows ones), and tried rebooting, but the same error happened. I then went through the Debian installer again, being careful to set everything up correctly, but still, the device won't boot.
I'm not even getting to the grub boot screen, so something is wrong even before the point. Reinstalling grub to the Master Boot Record (grub-install /dev/sda) isn't changing anything. How can I troubleshoot this?
General :: New Install Of Debian Failed To Load Grub Troubleshoot Options
Mar 21, 2010I tried to install debian on my system using a small image at first that would download all the necessary components during the install. It loaded everything except Grub, and wont boot. I need to rescue this as the downloading of all the components took ages and I don't want to do that again.
View 1 Replies View RelatedGeneral :: Best Way To Troubleshoot Server?
May 21, 2010Now that the server is set up, whats the best way to troubleshoot this server if problems should arise?
View 2 Replies View RelatedGeneral :: CentOS 5.5 VPS Web Server Has 'fallen Over' - How To Troubleshoot
Jan 26, 2011I have a VPS that I'm using as a web/mail/DNS server (all-round server) and is repeatedly falling over every 12 hours or so. It seems to be since I used a Wordpress plugin on one of my sites to send out an email newsletter - I had problems with the plugin itself, anyway.
I think it might be causing a memory issue, as I've run 'free' and 'top', which sometimes causes a "fork:Cannot allocate memory" message to appear. Other times it displays statistics and suggests that there's plenty of memory available. Are there logs that I should look at and if so, what should I be looking for? Also, how can I stop this rogue plugin from doing anymore damage, seeing as it still appears to be running?
Server :: Squid Keeps Needing To Be Restarted / Troubleshoot It?
Jun 2, 2011I have been running squid3 proxy on a Ubuntu 10.04 machine for several months with no problems.It serves about 50 users ( win and Lin clients ) and is usually rock solid.
However, over the last few days problems occur.
The users lose connection and I have to restart squid and all is ok again. Sometimes it drops 4-5 times in an hour ans sometimes not for 6 hours or more. I know the problem is related to Squid as the actual internet connection is on and the squid machine can access the internet.
Restarting squid cures the problem.
How can I troubleshoot this ?
Checking the cache.log doesn't show anything strange as far as I can see.
Could it be that the cache file is full or something ?
Ubuntu Installation :: Post-GRUB 2 Delay - Troubleshoot This And Determine What Is Causing The Delay
May 11, 2011After GRUB 2 comes up (I'm running Ubuntu 10.10) and I choose the OS to boot, there is about a 5 second delay where nothing appears to happen after I make the selection -- no disk activity. It happens consistently every time I boot. Again, this is after I choose the OS to boot, so it shouldn't have anything to do with the standard delay to allow me to choose the appropriate OS.Is there a good way to troubleshoot this and determine what is causing the delay?
View 4 Replies View RelatedGeneral :: Troubleshoot Failure Of Ldap Server Start On OpenSUSE 11.2?
Feb 27, 2010How do I go about to troubleshoot the failure of ldap server start on openSUSE 11.2? I added a custom configuration (through GUI) and now the server does not whant to start with that configuration.
View 1 Replies View RelatedSoftware :: Yum Configuration In The Redhat 5?
Mar 4, 2010I have the pirated redhat 5 in my notebook. Now I need to do yum configuration. But for this we need the baseurl. I don't know the baseurls for downloading some important packages.
View 3 Replies View RelatedGeneral :: Configuration Of New Kernel For Redhat?
Feb 18, 2011how to install new own kernel in Redhat 5. Can i install Debian kernel in redhat ?
View 2 Replies View RelatedGeneral :: Use Grub To Recover Redhat?
Mar 13, 2010While attempting to make my secondary hard drive accessible I managed to screw up me RedHat installation.
When I boot I get: Error loading operating system
I can use the PCs boot menu to select the "2. Primary Master Drive" instead of "1. Normal" and (Unix) grub comes up.
Can I use grub to recover my Redhat install?
Software :: How To Install Only Grub And MBR On RedHat
Apr 4, 2011I currently have a dual boot machine.
Windows XP on C:
Redhat Linux is on a second drive.
MBR and /boot with grub are on the C: drive.
I spent a lot of time installing and configuring the Linux applications on the secondary drive. This machine is rather slow. I'd like to remove the second drive with apps on Linux and put it into a different faster machine. Ideally, make it another dual boot machine. So far, with the Redhat install program, I can only see installing the whole operating system, which would wipe out everything. Is is possible to install just the MBR and grub alone?
General :: REpository Configuration In Redhat 6 64bit
Jun 6, 2011How to configure repository in my standalone system to resolve dependencies so that i will not have to install all the rpms in my system by typing rpm -ivh and the name of rpm.
View 4 Replies View RelatedServer :: Configure Redhat Enterprise Server 4 As Router And Proxy Server
May 18, 2010Im new in linux i want to configure my redhat machine as both router and transparent proxy!
View 1 Replies View RelatedDebian Configuration :: Get The Windows One Working Again - Grub Configuration
Oct 3, 2010I was trying to get the Windows one working again. Here's what fdisk -l reads:
[Code]...
I'll change these or do some grub configurations, if anyone knows what ones can work.
Server :: Rsync Files And Directories From A RedHat Host To A Windows Server 2003R2?
Jun 9, 2011I'm trying to rsync files and directories from a RedHat linux host(v 4.5 & 4.7) to a Windows server 2003R2 Standard Edition with cygwin running. I'm executing the rsync command from the cygwin shell. The transfer involves rsync'ing approximately 1 TB of data from the linux server to the windows server. After about 280+GB of data transfer, the transfer just dies.
There seems to be no particular file or directory that the transfer stops at. I'm able to rsync GB's of data from other linux hosts to this cygwin server with no problem. Files and directories rsync fine.The network infrastructure is essentially the same regardless of the server being rsync'ed in that it is GB Ethernet running through Cisco GB switches. There appear to be no glitches or hiccups across the network path.
I've asked the folks at rsync.samba.org if they know of any problems or issues. Their response has been neutral in that if the version of rsync that cygwin has ported is within standards then there is no rsync reason this problem should happen.I've asked the cygwin support site if they know of any issues and they have yet to reply. So, my question is whether the version of rsync that is ported to cygwin is standard. If so, is there any reason cygwin & rsync keep failing like this?
I've asked the local rsync on linux guru's and they can't see any reason this should fail from a linux perspective. Apparently I am our company cygwin knowledge base by default.
Server :: Configure RedHat As A Time Of Day Server For A Docsis Modem System
May 13, 2011I have been able to find enough information that I need to enable 'time-udp' in /etc/xinetd.d/ But there isn't an entry for time-udp. How do I enable time-udp (Time of Day server) on a Red Hat system? It's RHEL 5.6 64bit.
View 1 Replies View RelatedServer :: Icons Not Showing In GNOME Desktop At REDHAT ES Server
May 4, 2011Icons Not Showing in GNOME desktop at REDHAT ES Server.Also no right click on desktop .No Action.
View 3 Replies View RelatedServer :: Unable To Load Redhat 9 Server After Disk Recovered?
Mar 13, 2011I got this type of messages:k journald starting. commit interval 5 seconds.EXT3.fs:mounted file system with ordered data modefreeing unused kernel memory : 212 k freed.Warning:unable to open an initial consoleAfter this Server is not hang state but stay at same Anybody can help me how to resloved this type of issue.
View 1 Replies View RelatedServer :: Redhat Version 5 Server Use As BTSN Exchange?
Mar 6, 2011i had redhat version 5 server , i want use it as BTSN exchange can i used for this, and how
View 1 Replies View RelatedServer :: How To Install Bind Server On RedHat 5
Apr 26, 2010How to install step by step to install bind server on RHEL 5.
View 3 Replies View RelatedCentOS 5 Server :: Difference Between NIS And Redhat Dir Server?
Apr 6, 2009It seems that NIS/NIS+ and Redhat Dir Server/CentOS Dir Server have similar functions.
What are important differences between them?
Red Hat :: Redhat 5 Windows XP Dual Boot Boots Only Into Redhat?
Jan 11, 2011I had Windows XP working. I then put in a new hard disk and installed Redhat 5 on it. rom then i could only boot into Redhat. Further, everyting is very slow. Anothe rproblem is that Redhat does not see my netwrok so I cannot get onto the Internet. I need to have the choice of booting into XP or Redhat.
View 2 Replies View RelatedServer :: How To Install Ns2 In Redhat 5?
Nov 10, 2010what are necessary requirements to install ns2.can i install ns2 in redhat5v
View 1 Replies View RelatedServer :: How To Load Tun In RedHat
May 9, 2010how to load tun in RedHat
Code:
uname -a
Linux server 2.6.18-028stab067.4 #1 SMP Thu Jan 14 17:06:11 MSK 2010 x86_64 x86_64 x86_64 GNU/Linux