In my production setup, i have 3 servers using the same mount point. However, i see that the IOPS is low. Does this kind of architecture have any impact on IOPS. In case it is neutral, how can i tune my setup for better IOPS.
View 1 RepliesI have question about the UNIX sockets. my goal is to connect multiple sockets from a single client to a single server and keep them open...I'm not sure if that is possible to create or not. Do you have any suggestion or an example of code?
View 1 Replies View RelatedI have servers installed with RHEL 4 2.6.9-89.0.9 ELsmp. I tried using uuid and label in /etc/fstab to automount usb drives to mountpoints that I specify after reboot. Unfortunately, it just does not work in all my RHEL4 servers. After every reboot, /etc/fstab will be automatically modified and all configurations related to my USB drives will be changed. Irregardless of whether i use UUID or LABEL in my /etc/fstab.However, it works on RHEL5. But, upgrading is not an option in my environment. I have been googling around looking for alternatives but everything seems to point back to using UUID or LABEL in /etc/fstab. Anyone has tried something that works? Please help me, thank you.
View 7 Replies View RelatedI can see, that openSUSE mounts cdroms (at /media) according to cd label (eg. /media/data_dvd_x). My problem is, that several applications (eg. a cd cataloguer) expecting to find the cd at /media/cdrom0, or something similar. Is it possible to fix it? (Tell openSUSE to mount cds at a single point)?
View 9 Replies View RelatedWe can add multiple IP address on a single NIC. Is there any limitation that is how many ip address I can add on a single NIC card??
View 1 Replies View RelatedI have a RHEL5 server that hosts an apache SSL proxy and about 20 tomcat instances. As of late we've had latency issues on the system that I can't pin down. In trying to diagnose whether the local HD is being over-utilized, I started gathering disk utilization stats using iostat and sar. For Sar, I'm using the "tps" metric, and for IOStat I'm combining reads and writes per second for the raw disk device, sda. When I put the stats into excel, the profile of the graphed data points match up for the most part, but sar is reporting the values for the same data points as being many magnitudes higher. Can anybody give me a hint as to why one tool would report the same data differently when (as far as I know) both of them pull their disk I/O stats from the same place?
View 4 Replies View RelatedI want to virtualize some servers but need to figure out what their current IOPS are. I only have CLI access to the servers. Does anyone know how to do this?
View 3 Replies View RelatedI built a Suse Linux server on vmware. I attached an RDM to the server and can now see the drive as a "Mass Storage Drive" in Applications - computer. When I double click on the icon, I get an error message that indicates that the drive can not be mounted. I tried to mount in gnome terminal using: mount /dev/sdb and get "can't find .dev/sdb in /etc/fstab or /etc/mtab". I tried adding device that I would like to mount to fstab, but don't think I have the settings correct. I looking for any info that might step me through the process.
View 2 Replies View Relatedhave a look at the following thread story and please clear my doubt.
View 6 Replies View RelatedWe have too many audio Paths, for each user have one. We would like to create a unique folder to Read in network.
For example:
The idea is Mapping all folders to the path /pub/Music in server, so all user can access all music online in the server.
Very Well. How we can do it?
And when pc1 and pc2 have the same subfolder, like Beatles, and in the subfolder have different folders ( PC1-Beatles/Revolver ) (PC2-Beatles/Habbey_Road) or The same folder (PC1-Beatles/The_Mistery_Magic_Tour) (PC3-Beatles/The_Mistery_Magic_Tour)...
Is there a way to contemplate this issue?
How to run multiple X server in single terminal in linux .Is it possible .
View 3 Replies View RelatedI have a requirement that seems to be unique in nature. I have multiple clients who are caged to their home directories. I would like to "share" a directory which exists above these chroots with all these caged users. I know this can be accomplished using mounts but my problem is, how can I mount a single directory to multiple mount points located in each users home dir? Can this be done in the fstab file?
View 9 Replies View RelatedI am new in client server programming and i have written code for single server to single client communicating one port(3490). but i have no idea how my single server will be communicate with different client on different port.how this will be happen ?
Any idea to understand the logic or send any good link or any piece of code in c , i searched on net but all help was mostly for java progamming.
I am looking at setting up a multiple postfix SMTP servers for a single domain. Below is my requirement, I would appreciate if someone out there could guide me to achieve this using postfix..
1. Want to setup 2 postfix SMTP Server with 1 POP3 Server.
2. Server1 will host POP3 & SMTP services for domain "metallica.one".(IP: 1.1.1.1, MX: mx1.metallica.one)
3. Server2 will host only SMTP services for domain "metallica.one" (IP: 1.1.1.2, MX: mx2.metallica.one)
4. Server1 & Server2 will be used as load balancing for sending mails. (either manual settings in email client, or auto-loadbalancing is still preferred).
5. Mail received for domain metallica.one on Server2 should be pushed/forwarded/relayed to Server1 where POP3 services are running.
6. Outgoing mails for other domains from Server2 should be sent directly to the other-domain-recipients without relaying to Server1.
I have configured a file server with samba and winbind in RHEL5.I am able to allot permission for the active directory groups to my Linux folder.No issues.But i want to set multiple groups of active directory to get ownership to a single directory. Say there are 3 groups a,b,c to have permissions to a folder of the Linux machine.
Code:
chown -R root:Active_directory_group_name path_to_linux directory
I have set
Code:
chmod 770 /myshare
meaning that user and group would have full rights to /myshare
Code:
chown root:a
works great I tried with the option of
Code:
chown -R --reference=/etc/shares_own.txt /myshare
In reference file(shares_own.txt) i gave the entry as
Code:
root:a,b,c
This is not working.
I've been trying for a while mounting a EMC NAS share on linux. As far as I know the NAS share behaves just like a regular windows share, so the mount process should be very similar. On the NAS server, the disc "Disc1" is shared, and I need to mount a sub-subfolder of that share. This is my line in /etc/fstab:
Code:
//windows_box/Disc1$/folder1/subfolder /var/tmp/mount_test cifs defaults,acl,soft,uid=srvadm,gid=adm,umask=0027,file_mode=0600,dir_mode=0700,credentials=/root/cred.txt,sec=ntlmv2 0 0
When mounting the share, this is what happens:
Code:
[root@server1 tmp]# ll
total 8
drwxr-xr-x 2 root root 4096 Jun 18 10:39 mount_test
[code]....
In the console (i.e. bash), the "mount_test" word on the last line has a red background. When I issue "umount mount_test", everything is back to normal.
I need to create an extended partition with no mount point.Enclosed is my custom ks.cfg
install
cdrom
text
[code]....
Our system uses email to send fairly time-sensitive status messages between programs running on various servers on a WAN. Each email message is sent to two addresses (different servers). The problem occurs when one of the destination mail servers is off the network. I think because it's trying to send one email to two addresses, sendmail attempts delivery to the first address, then to the second address (i.e., serially). When this happens, it hangs for two connect timeout (CONNECT_TO) periods trying to connect to the offline destination, then after the timeout, it then delivers to the other destination. I'm trying to figure out how to work around that connection delay so it doesn't delay delivery to the other destination.
I'm working with the network guys to enable the right ICMP messages that signal when a network is unavailable, but I would also like to try having sendmail split the emails into two envelopes, then use parallel, independent connections for delivery.
After days of reading through the docs (O'Rielly Sendmail book + sendmail docs) I think one way to do this is to use multiple mail queues, but I can't decipher exactly how to do that from the docs.
There might be other, more elegant ways to do the same thing, but again, trying to decipher the docs has my head swimming. (This is my first experience with sendmail.)
Using SUSE 11 with Gnome. I mounted a CIFS share from a Windows server as /mnt/win. With the file browser, I can browse to file system/mnt/win and then the files and folders of the Windows share come up fine and I can open them. When I use the file browser to browse to network, the server hosting this share is listed. Then I browse to that server and it lists no shares (nothing at all). I can't go any further than the server. Is there a separate authentication necessary for the file browser to see this share from the network place?
View 2 Replies View RelatedI currently am running 10.04.1 and have successfully setup my home web server to run a single website. My current settings are:
-I have registered the domain name annarrankings.com through godaddy
-A record is - host = @ and points to = 71.114.220.3
-CName is - host = www and points to = @
-on my server I have the site running in /var/www
I've done some research and found that to run multiple websites I need to setup VirtualHost.
-So I created a folder /var/www/annarrankings.com and moved my site to that folder
-Edited Apache2.conf to add the following line
-I then went to /etc/apache2/sites-enabled and copied the default file to a new file called annarrankings.com. Here's the annarrankings.com file after I edited it
-I then created a link in /etc/apache2/sites-enabled to the annarrankings.com file in /etc/apache2/sites-available
-Next I editied /etc/hosts
-When i went to enable the site using a2ensite annarrankings.com I got the following
I figured this was ok since I had already created a symbolic link earlier (a result of trying to following multiple tutorials and ..... videos at once) so I reloaded apache2. I created an index.html file in /var/www/ just for testing purposes and when I load www.annarrankings.com I get the file located in /var/www/ instead of the website located in /var/www/annarrankings.com Do I need to change my A record or CName in godaddy or did I just do this completely wrong?
I dont know if this is possible or not but here what I would like to do. I have 6 linux server and each has 100GB disk space. All of these 6 box are compute nodes and space are not used really. However, If I can combine 6 servershard disk that will in total 6*100GB gives you quite a bigger space. Is there any tool or ways to mount these drive in one volume instead of mounting individually ?
View 2 Replies View RelatedI've tried to get an opensuse box I have to share a directory via NFS. I've failed each time, but I thought that the third time, I'd enlist some help from the forums, if I could. how do I know that the nfs server and not the client is the problem? Short answer is: I don't! That's why nfs (and many netwrk problems) are laborious, you're troubleshooting needs to take place at both source and desitination. Next question, what do I have set up so far? Well, I did download the nfs server kernel stuff (two months back) and /etc/init.d/nfsserver start seems to get set up OK. No errors and the daemons nfsd, idmapd, mountd area all running. So, I *think* that part is OK. I have the share set up properly in /etc/exportfs and have "exportfs -r" it.
OK, now onto the trickier stuff: the client and iptables. On the client pinging to the nfserver box is perfect, and I have rpcbind running. the reported error is "mount.nfs: mount system call failed" though from experience nfs errors don't mean a whole lot.However, I will go off and check now and see if I need a mountd running on client-side too.Then there's iptables .... ouch, that could be a long and painful trek. I don't see any specific ports being blocked, and it's the iptables that the default v11.2 opensuse came with. I did turn them off and the problem was the same, so whether wishfl thinking or not, I'm hoping it's not an iptables issue.
I recently installed the pptpd server on my system and set it up according to these instructions:HTML Code[URL]t=132029However after setting everything up on attempting to connect to it from a windows machine (windows 7 home premium to be specific) it gives me two errors which are 720 and 800...It reaches "registering your computer on the network" fine and then gives 720 on the first attempt to connect and then 800 on the second attempt to connect...and then on the third 720 and 4th 800 and so on..My system running the server's I.P is 192.168.1.70My system running the windows OS trying to connects I.P is: 192.168.1.66
View 2 Replies View RelatedI am tasked with setting up 3 out of the 6 servers and dividing up 500GB of space in the most efficient manner amongst the 3 servers. The space is in a pool which can be assigned to virtual drives. Each virtual drive can be assigned as disk0 or disk1 and so on to one or more servers. They'll be running CentOS.
On the second try I came up with this scheme:
shared sda1 -- /boot (ext3)
shared sda2 -- /home (ext3)
[code]....
calculating the IOPS for my system ?I had understood that IOPS could be calculated by monitoring IOSTAT. The r/s (reads/sec) and w/s (write/sec) combined basically gave you the peak IOPS.However having monitored iostat for my app during a performance test, the figures I'm seeing lead me to believe that iostat couldn't be a reliable way to calculate IOPS. I get values of over 10,000 for w/s! I didn't think this was possible given the storage system i have (4 x 7500rpm sata disks in raid 5).
View 1 Replies View RelatedI have files a, b, c and d. They're all relatively large and are served up by a static web server optimized for this purpose. I can get requests that look like this:
/abcd
/ad
/bacdac
...
Each request is basically a request for a concatenation of the files in the order of the letters. The list of possible requests is finite, but large enough that disk space will run out very quickly and be very expensive if I create all possible files via concatenation.Is there a way to create a pointer file like abcd that is essentially a multi-file symlink that first points to a then to be then to c then to d? So if the contents of the files were as follows:
a: hello
b: there
c: whats
[code]....
have to create a webhost on an running fedora server which runs multiple webpages + a coldfusion serveri have to add an coldfusion virtual host to these.what i would do:*crate a new user & group*enter vhosts.conf and copy an existing host and modify it for the new one.*create an new folder and copy the main files (phpstarter and webroot) *chown the files for the right useri think an apache graceful would be needet
View 1 Replies View RelatedI have a requirement of using a wildcard certificate for 5 subdomains running under apache httpd server and 1 subdomain under tomcat.Is there any possibility of using the single wildcard certificate both in tomcat and apache
View 3 Replies View RelatedI am running single drive Ubuntu server 9.10 with a lot of software. Now I want to add one more disk (same size and type) and to convert this to RAID 0 without need of reinsallation. Is it possible and if yes how? I didn't find nothing for RAID 0. It sounds simple, but probably is not.
View 4 Replies View RelatedWhen i boot my node-machines they are stuck in (initramfs) after showing the following error:
Gave up waiting for root devices.Common problems:
- Boot args (cat /proc/cmdline)
- Check root delay (did the system wait long enough)
[code]...