I am asked to look for a very nice sms gateway with a good GUI be it commercial or free. where can I find a nice smsgateway with GUI? I looked at kannel but it didn't mention any thing like GUI so am not sure I will go for it.
View 1 Repliescould You please tell me what kind of tools You using to monitoring health of RAID / SAN ?Do You know any nice tool to monitoring CCISS ?
View 1 Replies View RelatedI have freshly installed an Ubuntu 10.04.1 by internet.
All is running well, but my nice values are all set to 0. Is there a script that handles these at boot time? How can I reset them to "appropriate" or "normal" levels (e.g. not all at 0)? I know in other installs, my nice levels vary depending on the process and the user.
Attached is a screen shot of my gnome-system-monitor, and aside from init, which I had set to -15, all others are at 0.
Computer specifications:
Linux AMD-LNX000 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:05:27 UTC 2010 x86_64 GNU/Linux
AMD Athlon 64 Processor 3000+
[Code]....
Since TeamSpeak 2 doesn't come in a nice RPM anywhere, I am under the assumption that I have to go to TeamSpeak's website, download TS2, and install through their script. I did all of that, and I can successfully launch TeamSpeak, however there is no sound whatsoever. No mic, and no speakers either. TeamSpeak automatically forces mute microphone and mute headphones on me, and I can't uncheck them. Therefore, something must be wrong with TeamSpeak and my sound setup.
View 3 Replies View Relatedis there any nice web development application?
View 6 Replies View RelatedAll my applications seem to be running at nice of 19 except bash and daemons which are running at 0. My understanding is that the default nice value is either 0 or 10 (forget which) but not 19.Ran search in /etc/sysconfig/ editor and no results for "nice" and looked at the bashrc files and again no lines contain "nice".
View 9 Replies View RelatedI followed the tutorial on URL... on Ubuntu but I don't get all my mail in one nice big file instead, I get possibly every message, each one given a horrible filename URL..What could have gone wrong while following the tutorial?
View 3 Replies View RelatedWhat is the command to display the nice value of a process?
View 4 Replies View RelatedWhat is the default nice value for processes?The setpriority() function sets the nice value of a process, all processes in a process group, or all processes for a specified user to the specified value. If the process is multi-threaded, the nice value affects all threads in the process. The default nice value is 0; lower nice values cause more favorable scheduling.
View 2 Replies View RelatedI use Vector Linux 6 (based on Slackware 12.1) and I set the encoding to UTF-8 because I use Spanish characters. The problem is that when I try to open files with accent marks, for instance, with xpdf they all look garbled. How can I get xpdf to display the names correctly?
View 9 Replies View RelatedI am trying to change the priority of child using nice() but still it runs first.
Code:
#include <stdio.h>
main(){
int pid,i,retnice ;
[Code]....
I'm currently running on a really old computer with one proc and little memory. It's just enough to get skype running but it only works well enough if I change the nice level to -5 or lower. Now the person that uses skype in the house is really the wife, I don't want to teach her how to open htop in command line, fine the pid and then use the correct command to change the nice.What I am looking for is a script (sorry I don't know thing one about programming/scripting) that will change the nice priority periodically for all pid that are skype. This way call processes will get reniced as well. I know better then to run it as root/sudo, but I am at a loss (even searches came up with not much) on how to do this.
View 1 Replies View RelatedDoes anyone know the class name for Empathy's chat windows and buddy list? On Ubuntu 10.10:
System->Preferences->CompizConfig Settings Manager->Window Management->Place Windows->Fixed Window Placement
Trying to grab the Empathy window class doesn't produce any results and adding "empathy" as a windows class to control only affects the "about empathy" window and not the conversations or the contact list.
It'd be nice if Empathy behaved like the rest of my programs and allowed me to restrict it to a specific workspace. Not sure what class I should be using.
my idea is to have gvim working like gedit in ubuntu 11.04: when you open a file thru unity's dash, and if there's already an open editor, it opens the file in a new tab.To make nautilus open more than one selected files in gvim's tabs, i used to change the exec line in /usr/share/applications/gvim.desktop to "Exec=gvim -p --remote-tab-silent %F". This trick is working ok in nautilus and also in unity, just like the way I was planning.
However, when i try to open gvim itself without specifying any files (from unity's dash or a launcher set) it fails. Can anyone please help me with this ?
My cpu is set via Gnome-power manager to automatically speedstep under demand....
the thing is i have a few nice level 19 processes running most the time that eat up all the idle time, this forces my clock speed up and as such makes the fan noisy and uses more power...
basically what i would like to do is to ignore process load with a nice over a certian level when determining weather to speed step.
Does anyone know how to get the nice looking puppy jwm interface into another distro? When I install jwm, it looks plain and boring. I'm wondering if there's anyway to make it like puppies, but have a better package manager.
View 1 Replies View RelatedI just moved back to openSUSE after spending almost 2 years in ubuntu-land. What happened to the fonts? Why are they so ugly? To me it looks like they are poorly rendered. I installed openSUSE 11.2 on another computer to confirm the problem... it persists. I took some screenshots to compare my settings.
Ubuntu: [URL]
openSUSE: [URL]
The second screenshot doesn't show, but both settings are using the exact same fonts and the same size. (Except the Window title font). From those two, it should be very clear that Ubuntu renders them more nicely. I don't want to start an UbuntuopenSUSE flame.. How to make my openSUSE machine display nice fonts.. ?
I just installed 11.4 on an old hard drive, probably with 11.3.
All works well, but I can't get the nice icons for user login in kdm.
Of course, I tried to change this in kde system config, but with no result. In fact what I do there do not change anything.
I suspect some sort of permission problem, but how can I simply reset all the global kde settings (The problem arise before login)
I've been searching for the answer to my question for quite some time on google, no luck. Due to my searchings I've become very familiar with nice and renice.
I have a script I use for launching a game installed with wine. I cannot/wont run this game as root but I need to be able to use nice --7. As of now I can't I -- ofc -- get "permission denied"..
So how do I make the full range of niceness ( [-19;20] IIRC ) available for all users on my system -- or even just for 1 user?
I'm trying to setup my Nvidia Graphics card on my DELL Latitude D620 machine. After the clean install, it does not want to show my the nice interface options, I can only see the effects
View 2 Replies View RelatedCurrently running Ubuntu 9.04 on my Acer Aspire One D150, multi booting Win Xp, Win 7 and Ubuntu.Can I upgrade to Grub 2 and use one of the nice themes ?? Sora ?
View 9 Replies View RelatedWhen I open top and look at the running processes, there a bunch that are -5 in the nice and 0 with everything else.
[Code]....
i may have an issue or not with pulseaudio, under the system monitor i see a -11 under the nice colum for pulseaudio. does that indicate a problem or is it nothing to be concerned about?
View 1 Replies View RelatedIs there a quick and easy way to make sure apache always starts with a certain nice value?
View 1 Replies View RelatedThis is my first day with ubuntu 11.04. First impression was great but now I have a problem.
I tried to change the desktop switcher to rotate cube. On ubuntu 10.10 I had installed compiz fusion. So I went to compiz setting, I looked for rotate cube and I ticked it. When I did this a couple of windows asking about enableing and disableing poped up, and unfortunatley I clicked them without reading. I assumed they were just interface related...
Know when I open my laptop I don't have any main menu bar, or tool bar at the top of the desktop nor application icons on my left. I tried "CTRL+ALT+T" but the terminal does not open. I tried opening with recovery mode but unssuccessful.
So some flash games don't seem to play nice with Ubuntu. Some do. I have no problem playing Cursed Treasure, but when I try to play, say, Learn To Fly, the opening page loads, but then when I click the "play" link, it does nothing.
Also, using the latest release of Ubuntu.
Each day I need to copy N files from a source location to a mirror at a specific time (where N is very large). Let's say I tell multiple CPUs to each run an rsync simultaneously on a subset of the files (network and disk bandwidth are not an issue). Ideally each CPU would be responsible for a disjoint subset of the N files, but in practice this is sometimes hard to guarantee. (Some of the source files might be "claimed" by more than one CPU.) As a result, sometimes rsync I and rsync J will both try to copy file F at the same time.
Using rsync -avz --delete --temp-dir=/tmp remote:/path/to/source/ /path/to/dest/, let's say rsyncs I and J both see this situation to start:
[Code]...
Now rsync J finishes copying but generates an error when it tries to move its version of FileB to /path/to/dest/ because there's already another FileB there that it didn't see when it started.
Does one of rsync's many options somehow handle this situation? Ideally I'd like an option that tells rsync, "Believe in yourself. You can do no wrong. Feel free to overwrite anything your little heart desires." so that it wouldn't complain about the FileB that has suddenly appeared mid-execution
I have vmware workstation installed on my OS and I am now trying to setup several iso.'s as virtual machines inside of vmware.
Here are some of the iso's:
Now, I get as far as the 'Gues Operating System Installation' part and then at the bottom I see a prompt saying "could not detect which operating system is in this disc image. you will need to specify which operating system will be installed". Aren't my iso's operating systems? or are they just apps?
I'm looking for a good jukebox software, by good, I mean, easy to use, nice web panel, and useful features. (Okay, it's a bit vague...I admit it) So I need your help to find the "best" one (I know it would be even better to try every solution, but I'm sure I will not be able to see every features as you might have seen) I've seen so far 3 good projects:
- Ampache
- Jinzora
- and Subsonic
I've tried Ampache and Subsonic thanks to their demo. Unfortunately I didn't manage to get a demo of Jinzora. Ampache seems a bit 'old fashon' (The interface is not very clear, not very user friendly, ...) but seems to get good features. inzora, according to the screenshots I've seen, the interface is quite complete. And Subsonic seems to be a really good one (but in Java), a lot of features and a nice interface. I'm not asking you which one do you think is the best, but which one do you prefer and why ? Which useful features, pros and cons, etc.
Ideally, I would be able to have Jack (for supercollider) coexisting happily with other apps that use the audio system, specifically --
Rhythmbox (yes, there are other players but this one interfaces cleanly with my iPod) Oracle virtualbox (which I use for NaturallySpeaking)
The typical recommendation around the web is to configure ALSA to pipe its audio through Jack, which I tried according to [URL]. With that .asoundrc, I could choose ALSA as the driver for VLC and it output okay. But I'm not sure how to tell rhythm box to use ALSA instead of pulse audio. Worse, when I changed my virtual machine's configuration for ALSA (instead of the default pulse audio), the audio connection died -- the alsa ports disappeared from qjackctl's Connections window, and NaturallySpeaking didn't pick up any audio. This is fairly serious because I depend on dictation software to deal with an RSI (dictating English, not code of course) and I'd rather not have to stop Jack just to dictate something.
Rhythm box and virtual box both work perfectly with pulse audio connecting directly to the hardware. In the past, I've gotten pulse audio to route through Jack but it's dicey -- xruns are common and sometimes the audio gets choppy.
What next? I suppose getting the ALSA configuration right is the best thing, but early tests were not exactly encouraging.
(edit) PS I'm using virtualbox for DNS because wine failed me. Completely Plus wine's jack option for audio IO did not work with NS at all. NS works really well in virtualbox so I'm keeping that one.