I have tried to mount new hot swap scsi drive in IBM xSeries 226.
I have put new drive to the pocket and tried to list all new drives using #fdisk -l
I cannot see that drive.
How to mount this drive ?
Should be something like /dev/sdc . In this server I have 3 drives (include this which should be mount). I have also restarted server. Doesnt help.
I'm running VMWare Server 2.0 on WindowsXP as host.I have guest O/S Linux Fedora 8. i cannot access USB drives on my VM. USB drive shows up on the VMware console window as part of my devices, like CD/RW drive, etc. But for the usb drive, it is GREYED OUT./proc/partitions never shows a USB device upon connection of the drive. I have tried googling this to death and found no solution that works.
View 1 Replies View Relatedhow to mount windows xp fat32 drives in fedora core 7
View 1 Replies View RelatedI've installed FC 15 on a USB stick (it is not a live usb, it is a regular installation on a usb stick), and I am looking for a way to automatically detect and mount swap partitions on a host system where usb stick is plugged in. I am using many FC boxes and almost all of them have a swap partition on the hard drive and I would like to use them even if I boot my system from a usb stick.
View 4 Replies View RelatedI have servers installed with RHEL 4 2.6.9-89.0.9 ELsmp. I tried using uuid and label in /etc/fstab to automount usb drives to mountpoints that I specify after reboot. Unfortunately, it just does not work in all my RHEL4 servers. After every reboot, /etc/fstab will be automatically modified and all configurations related to my USB drives will be changed. Irregardless of whether i use UUID or LABEL in my /etc/fstab.However, it works on RHEL5. But, upgrading is not an option in my environment. I have been googling around looking for alternatives but everything seems to point back to using UUID or LABEL in /etc/fstab. Anyone has tried something that works? Please help me, thank you.
View 7 Replies View RelatedI am thinking about using aida to nuke my drive and then I'll re-partition it with gparted. I don't want to lose my 15 GB installation of Fedora Core 10 in the process and have an external 80 GB drive. How could I back up Fedora to this drive with the intention of copying it back to my internal drive?
View 2 Replies View RelatedI can't get Redhat (Fedora) to mount my usb Flashdrive. My windows O/S has no problem with my usb flashdrive. I can mount my CD Drive and my Floppy drive. My mouse is pluged into one of my usb slots and it works. What am I doing wrong.
View 1 Replies View RelatedIts annoying to unmount my flash drive twice.. its not a major problem actually but its kinda annoying , its whenever i plug-in my flash drive.. everything works well except when i need to un-mount it.. I usually unmount it twice using right-click of the mouse, then it mounts itself back, so i have to unmount it again.. Is there any way to control this? How do i setup the auto-mount option for USB flash drives?
View 1 Replies View RelatedI'm trying to install Fedora 3 Core on an old hard drive I had lying around. The problem I'm having is that when I go to manually repartition the hard drive with Disk Druid I get this error: Could not allocate requested partitions: Partitioninf Failed: Could not allocate partitions as primary partitions. I can't view the contents of the hard drive to delete stuff.
View 6 Replies View RelatedI recently setup an email server on Fedora Core (14). Sendmail is running and I am trying to authenticate from a client pc using imaps. I installed Cyrus-imap and it is running and listening on 993. When I try to login, it doesn't accept authentication even though I verified the user's password is correct. (tested with ssh)Is there something I have to do with Cyrus or on the server to allow connections to email? I have not used Cyrus before. I am attempting to access my mail folders via Sendmail and did not make mailboxes in Cyrus. I did allow imaps through the firewall.
View 1 Replies View RelatedWe're running a sendmail server on a fedora core 9 which we've configured recently. The problem is, the server is working fine but there are some e-mails that enter our server but doesn't get forwarded to the user.
Quote:
Quote:
Here it says "stat=Sent" but nothing from the above mail address has been received on the client's inbox. We've experienced this with Microsoft Outlook, Outlook Express and Thunderbird alike so far with Two(2) of our user accounts.
i download the rpm package of gcc .
View 10 Replies View RelatedI just loaded F14 on an old Dell Dimension 3000 with a dual core processor but only one is showing. Here's the output from top:
processor: 0
vendor_id: GenuineIntel
cpu family: 15
model: 4
[Code]....
i have a own internet cafe that use a Fedora Core 8 as a dhcp and proxy server, and i had two normal users that created in my server to monitoring the billing of client who use the internet. But was delete those users and create a new one and restarted the server. and the problem is when booting process running suddenly hang and cannot continue but the server doesn't showing any errors and cannot continue the booting process.....
View 14 Replies View RelatedI have created a virtual machine of a system running Fedora Core 4 and I need to upgrade it to Fedora Core 10. Based on what I have read, it iis possible so I started theupgrade process. I get an error message saying that /dev/hda6 (my root paritition does not exist) even though it does.
Does the installer need to read a label from /etc/fstab? I executed tune2fs -L / /dev/hda6 amd ,and added LABEL=/ for the corresponding entry for fstab. but the FEDORA CORE 10 is still giving the same problems for the installation process. Should I upgrade to an intermediate verson like Fedora Core 7 first?
I have this ISP grade Nameserver running on BIND 9.5 on Fedora Core 9 64 Bit.
Its been pretty working well for sometime until a last week when we noticed it stopped resolving for our clients using on our service.
It gives correct authouritative answers for our own ISP domain with the A, PTR and MX intact but does not return resolving queries back to clients.
Below are my files
This is the message from /var/log/messages
The 41.223.x.x and 41.215.x.x ip address are from our ISP subnet and so are our own clients being denied.
The box is also hosting our traffic graph server which is on a LAMP but listens on another IP/ethernet card.
So far the load on the server is minimal as is a Dell R200 rack server.
iam trying to access tape drive .but iam not able to see its location.is any command to install and access tape drive
View 2 Replies View RelatedHere comes my problem: I am installing a new unit with Fedora Core 5,I will use it as my internet server. I need one additional PCI network card but it is not detected during installation.what shall I do?
View 5 Replies View RelatedI'm having some trouble installing the php-development package on my fedora core 6 server.
Code:
yum install php-devel
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
[Code]...
i am trying to mount a pen drive in Redhat linux Advance Server 2.1As but i am unable to do that can any body help me for doing that.
View 8 Replies View RelatedWe are running our website on a VPS Centos 5.6 box, and I am trying to set it up as an NFS client to a remote NAS server box. The script (remote_mount) I'm using (copied inline below) works fine when I run it on another Linux server box running Slackware, but when I run the same script on the Centos box I get the following error message. code...
View 4 Replies View RelatedI am using CentOS 5.5 OS. I already install ntfs-3g rpm, but I don't know the command to mount network NTFS drive. I also want to mount it on my fstab file, so whenever it reloads, it can automatically mount on the specific folder.
View 9 Replies View RelatedI am tasked with setting up 3 out of the 6 servers and dividing up 500GB of space in the most efficient manner amongst the 3 servers. The space is in a pool which can be assigned to virtual drives. Each virtual drive can be assigned as disk0 or disk1 and so on to one or more servers. They'll be running CentOS.
On the second try I came up with this scheme:
shared sda1 -- /boot (ext3)
shared sda2 -- /home (ext3)
[code]....
I am in school for my CIS degree and the book I am using this session covers Windows XP and Fedora Core 4. I am having trouble finding & downloading Fedora Core 4. My question is: Is there a big enough difference between Fedora Core 4 and Fedora Core 14 that I would not be able to use 14 instead of 4?
View 14 Replies View RelatedWhen i first installed ubuntu about 2 weeks i left about 30gb left for windows vista. I have not used vista at all so i decided to delete it and use the whole hard drive for ubuntu. I got the liveCD out and went into the partition editor on that (i had ubuntu,swap,vista in that order) and deleted the swap space and vista and increased the size of the Ubuntu partition to so there was only 4gb left for swap. I then booted up again from the hard drive and i get this message "one or mounts cannot be mounted" or something to that effect and it talks about the swap partition and offers to boot in recovery mode which does work.Once in recovery mode i go in and try and make swap partition with Disk Utility and i do that and it works. I go to restart Ubuntu to test it out and the same problem happens again, cannot mount swap ect. so i go back into Disk Utility and it now says 4gb Unrecognized instead of swap
View 4 Replies View RelatedFor some time now - every time I reboot my computer the swap drive is not mounting. I have to manually mount (Swapon) it via GParted. Using the sudo mount -a does not seem to have an effect.can Anyone tell me what is going onhere is my fstab:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]...
when i test errors by "sudo mount -a" i got this
mount: mount point swap does not exist
after writing this command "sudo gedit /etc/fstab" ,,,, i got this
UUID=5148630128FE30C4 /media/Collection401 ntfs-3g defaults 0 0
UUID=FE4C11644C1118CB /media/Collection402 ntfs-3g defaults 0 0
UUID=6e73cf26-edcd-42b0-884c-e2686dd70d15 / ext3 defaults 0 1
UUID= swap swap sw 0 0
UUID=7DF3923D63A29C0E /media/Eng ntfs-3g defaults 0 0
UUID=492905577CF6BDDF /media/Software ntfs-3g defaults 0 0
/dev/sr0 swap udf,iso9660 defaults 0 0
all when installing my linux i dind't create a swap partition.now i'd like to use one.so i've create a swap partition.So how to mount it and let the system use it.
View 2 Replies View RelatedUbuntu has been complaining about swap not being ready during boot. The swap partition was showing up un-known in gparted. I booted off CD, reformatted it to swap. Error message gone but system monitor > resources shows my swap size to be 86GB (the exact size of my shared NTFS volume). gparted shows the swap partition as not 'swapped on' I am running Ubuntu 11.04 along side Windows 7 (as well as my factory restore partition) and an NTFS shared partition.My partition structure in order of location on disc.
sda1-2 Windows 7
sda4, extended partition
--sda6 Ubuntu
[code]....
I got NFS installed all fine and dandy.
I want to make it now so that my drive will mount either at startup or a Keyboard shortcut.
Problem I run into is I need to logged in as root or have sudo access.
I got a feeling that it won't be that hard, maybe.
Pretty much I wanna run
sudo mount 192.168.1.102:/media/Xternal
Without putting in a password.