Server :: Getting The DDNS Configuration In RHEL 5.2?
May 18, 2011
Friends i got an opertunity to configure ddns in my office.I already configured staic dns in linux, but this is the first time iam configuring ddns.I just configured ddns in rhel 5.2 in my office.So far every thing working fine,dhcp is giving ip address to the clients and both forward and reverse dns database is updating.
1) In windows we can use flushdns and registerdns commands to update the dns database, like this any command is in linux to update client details in dns database?
2)how to restrict multiple client entries keeping in dhcp database.
3)if i change client hostname it is not updating the dns database,it is keeping the old one.
View 8 Replies
ADVERTISEMENT
Feb 5, 2010
I have setup dns on my rhel 5 server. It is working fine. My dhcp server is setup on my sonic firewall. The sonic firewall hands out our IP addresses. My dns server sees the static IP addresses but how do I get name resolution setup for dhcp?
View 1 Replies
View Related
Feb 1, 2011
We are planning to migrate our LINUX server from RHEL 3to RHEL 5. What are the configuration difference between RHEL 3 to RHEL 5 for webserver installations?
View 1 Replies
View Related
Jul 14, 2011
DHCP I have working, so is BIND.
I'm trying to get dynamic dns working and am having issues
I suspect this maybe a chroot issue.
I've tried to follow the chroot advise within the wiki for Bind but no joy.
View 6 Replies
View Related
Jun 3, 2011
I've configured my dhcp server to update dynamically the DNS zones of BIND9 name server. Everything works ok, except for reverse nslookup:
nslookup 10.141.50.3
Server:127.0.0.1
Address:127.0.0.1#53
[code]....
View 2 Replies
View Related
Feb 25, 2010
I have few doubts regarding fonts configuration in RHEL 5.4.
Code:
[vinay@linuxcoe4 fonts]$ cd /usr/share/X11/fonts
[vinay@linuxcoe4 fonts]$ ls
100dpi 75dpi encodings misc TTF Type1 util
[vinay@linuxcoe4 fonts]$ cd /usr/share/fonts/
[Code].....
What is the difference between fonts in /usr/share/X11/fonts and /usr/share/fonts
Also there is no fonts.dir file, which describes fonts under a specific fonts directory in /usr/share/fonts tree.
But we can find fonts.dir or fonts.scale file under /usr/share/X11/fonts/ tree. Does files under /usr/share/fonts tree are not dependent on fonts.dir ?
View 2 Replies
View Related
Jul 27, 2010
i've installed bind and dhcp. I'd like to update dns automatically by dhcp. For the reverse-lookup-zone everything works fine. But for the forward-lookup-zone there is still the message denied. But i cannot see a mistake.
dhcp:
#
#
# DHCP Server Configuration file.
[Code]....
View 8 Replies
View Related
Jan 8, 2010
What are the bare minimum configuration files that would be needed to rebuild a RHEL server?We are thinking about creating a generic base image and then just copying over the necessary files (fstab, hosts, networking, etc) to get a failed system back up and running in the least amount of time possible. I am fairly new to Linux and have suggested that we have a share on a redundant server that is /server_configs/Svr_name/*.* (names are subject to change and *.* would be all of the pertinent config files to make a fresh build customized enough to emulate the failed server).Is this even possible and/or plausible?
View 1 Replies
View Related
Mar 8, 2011
I've run into a strange issue with a DHCP/DDNS setup whereby when the DHCP server asks the DNS server to add a new host, the forward map is added correctly but the reverse map has the subdomain added twice (e.g. 192.168.25.192.168.25.250)I'm running ISC DHCPd version 3.0.1 and BIND version 9.2.3 on SuSE 9.2 - 32bit.Here is my dhcpd.conf file:
# dhcpd.conf
authoritative;
include "/etc/named.keys";
[code]....
View 2 Replies
View Related
Feb 25, 2010
I was thinking about setting up my own mail server. Problem is my ISP will not let me have a static IP unless I upgrade to a Business class service which is just too expensive for home use. As a work around I use a DDNS service from Dlink, which is actually done via DYNDNS.com. So essentially I have mydomain.dlinkddns.com point to my Dynamic WAN IP, and it is all automatically managed by my router.
Is there a way I can haveoint to my mail server without it being a subdomain of my DDNS om)? In other words I would like to have the email someone@mymaildomain.com and not have it be dlinkddns.com or something like that. I know someone has done it, I just have never done it. Not quite sure what to google to find the answer myself either.
View 4 Replies
View Related
Mar 2, 2011
is possible to edited the default RHEL CD to have it automatically install RHEL based off of a kickstart file that I will store locally on the CD. My plan would be to put a cd in a server and have the OS automatically being installed.
View 3 Replies
View Related
Dec 14, 2010
what are the major differences between rhel 5.2 and rhel 5.4
View 2 Replies
View Related
Dec 9, 2009
I have a database server running RHEL 5.1 32 bit that suffered some catastrophic failures about 6 months ago. We were able to patch it back together and keep it running, but now the manufacturing site it supports is going to shut down for two weeks and I would like to replace it permenantly. Does anyone have any guidance for that sort of thing? I'd like to have the new server up and running before hand, basically changing the hostname/ip and restoring the databases only on conversion day. I've done this in the past with HP UX - Red Hat conversions, but this is my first red hat to red hat move. Any advice or shortcuts?I forgot to add the other wrinkle. The new server will be running 64bit linux.
View 1 Replies
View Related
Mar 22, 2011
I have canon image runner 2200 network printer with scanner. i want configure that scanner in RHEL 5.anyone can help me about its configuration.
View 1 Replies
View Related
Feb 24, 2010
I have few doubts regarding fonts configuration in RHEL 5.4.
Code:
[vinay@linuxcoe4 fonts]$ cd /usr/share/X11/fonts
[vinay@linuxcoe4 fonts]$ ls
100dpi 75dpi encodings misc TTF Type1 util
[code]....
Also there is no fonts.dir file, which describes fonts under a specific fonts directory in /usr/share/fonts tree. But we can find fonts.dir or fonts.scale file under /usr/share/X11/fonts/ tree. Does files under /usr/share/fonts tree are not dependent on fonts.dir ?
View 2 Replies
View Related
May 14, 2010
I believe that SU log messages are supposed to be appended to /var/log/messages but I'm not getting any log entries. I edited the /etc/syslog.conf and added the line below
su.* /var/log/sulog
Then ran /etc/rc.d/init.d/syslog restart (I also ran this prior to editing the syslog.conf file just in case). I'm still not getting any SU log messages.
View 2 Replies
View Related
Mar 24, 2011
I have and RHEL5.4 conecceted to an SAN HSV200. When I present a LUN to it, In system-confg-lvm gui appears a device like /dev/mapth/mapth0 (that�s the correct device to multipath) and other like /dev/sda or /dev/dm-N, as uninitialized entities. How could I configure to not display this device (/dev/sda) and prevent human errors?
This is the things I need:
1- I want (if it is posible...) to disappear the part where it says "uninitialized entities"
2- Is It necesary mantain the partitioning done to default (like /dev/mapper/mpath0p1) with device-mapper-multipath (kpartx command)? or Can I delete it without future problems?
This is the actual configuration that I have:
1- /etc/lvm/lvm.conf
Code:
preferred_names = [ "^/dev/mpath/", "^/dev/mapper/mpath", "^/dev/[hs]d" ]
filter = [ "a/dev/mapper/mpath.*/","a/dev/cciss/.*/","r/.*/" ]
2- /etc/multipath.conf
Code:
#blacklist {
# devnode "*"
#}
[code].....
View 3 Replies
View Related
Apr 23, 2010
I am trying to install and configure nagios on RHEL 5. I have apache 2 installed and php all working as exepected. When i install nagios following the these steps [URL]. The nagios folder that is suppossed to be placed under apache2's httpd is no where to be seen. So when I try to open localhost/nagios/. It says: The requested URL /nagios/ was not found on this server. What can I do for the nagios to work on this system. The apache and php are working fine.
View 1 Replies
View Related
May 27, 2010
issue in starting up Open view monitoring on couple of linux servers and here is the output from mii-tool looks like.
eth0: 100 Mbit, full duplex, link ok
eth1: 100 Mbit, full duplex, link ok
[code].....
Based on what I understand, eth0 goes to monitoring and the other 2 ethernet cards go to FE. I am not an expert in system administration but would like to know if there is any issues with the above settings/configuration (in fact, im also looking for what do they infer and what is the settings?
View 2 Replies
View Related
Aug 10, 2011
One monitor is working fine but the display is not coming on other monitor. I guess no problem in monitor because I swapped the cable to check the individual monitor. When I try to install the new driver its giving GCC-VERSION-CHECK while installing. And I do not think I have to install the new driver because it has already one. What should I do to configure the dual monitor. Do I have to edit any configuration file.
My system configuration details are below.
Redhat version : Redhat Enterprise Linux WS release 3 (Taroon update 4)
Driver in SRBC 26: NVIDIA-LINUX-x86_64-1.0-7664-pkg2.run
Nvidia card model : Quadro fx p171
Bios version of Nvidia : 4.35.20.23.07
p/n : 900-50171-0400-0000K
600-50171-0002-201J
View 3 Replies
View Related
Oct 12, 2010
I installed RHEL 6 Beta 2 on ESX box and found that network is to be manually started through ifup command.
View 6 Replies
View Related
Jan 14, 2010
I want to create a small network of 3-5 computers. I want to have one computer as my server and have services like NFS, DHCP, NTP, etc. I want to connect it to 2-4 other clients that have the bare minimal installation of linux on them. I would like 1 client computer to have a static ip address and I would like another to receive a dynamic ip address from the server. How would I go about doing all of this without the assistance of GUI's? I want to be able to do all this with the ks.cfg and network config files.
View 4 Replies
View Related
Feb 8, 2010
I am new to mysql can some one provide me the documentation or some recommended links to start the configuration of mysql server on RHEL. Also if I get the database schema, how can I replicate the same in my machine. Any documentation for this?
View 8 Replies
View Related
Mar 8, 2011
I have installed ldap and phpldapadmin.configuration looks like /etc/ldap.conf I added the lines
Quote:
base dc=devnet,dc=gd,dc=com
uri ldap://10.10.1.51/
/etc/openldap/ldap.conf
[code].....
View 6 Replies
View Related
Jul 24, 2010
I am running a web server with a public ip that is dynamic. I am using ZoneEdit.com and my WRT54GS router to manage my dynamic ip address whenever it changes. It is working as it should.
However, the subdomains ip addresses are not changing. It still shows the old addresses versus the new address. Is it possible to set it where my subdomains address will change as well?
Right now on my router under the ddns menu, I have the host name set to domain.com. Do I need to make a wildcard?
View 2 Replies
View Related
Feb 11, 2011
I have two virtual hosts that I want to be able to send through one router. I have two seperate dynamic hostnames on dyndns.
Apparently my router allows me to enter two seperate hostnames locally as well: DynDNS Host and Domain Name
Code:
How do I tell the router which is which? Currently I see the same site with both URLs
Do I have to set one vhost to do some 'funky' stuff (black hole in my head when it comes to static routes or BIND? ). And then set the other vhost to host both sites?
I'm running CentOS and an apache webserver. I want to demo a web site 'externally' from two different sub-domains.
I've looked high and low but most examples don't seem to be simply trying to put two different web-sites up to two Dynamic DNS Hosts.
It must be possible, all the pieces are there. I'm just missing the link!
View 10 Replies
View Related
Apr 3, 2011
I have DDNS configured and working for dynamic addresses, but it's not quite right for static addresses yet. The DHCP server assigns the static address, but it doesn't update the DNS sever with the associated host name. Which means I have to use the IP address when accessing the host instead of the host name. How can I get the DHCP server to update the DNS with the host name associated with the fixed-address?Here is my current dhcpd.conf.
Code:
ddns-update-style interim;
ignore client-updates;
[code]....
View 2 Replies
View Related
May 24, 2010
I am getting these error in RHEL 5.3 while i did "yum update".
---> Package libstdc++-devel.i386 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++-devel.x86_64 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++44-devel.i386 0:4.4.0-6.el5 set to be updated
[code]....
The program package-cleanup is found in the yum-utils package.
View 2 Replies
View Related
Oct 9, 2010
RHEL 5 is my proxy server. i want to remove temp files and cache . How do i remove cache and temp files.
View 3 Replies
View Related
Apr 11, 2010
I am trying to do a https access with virtual hosting with apache.
But when I install mod_ssl rpm httpd server does not start again
I am stumped
httpd -t shows syntax is OK
View 5 Replies
View Related
