Server :: Using Ssl On Name Based Virtual Server?
Sep 11, 2010
I want to make virtual name apache server in order to run http and https on my domain, but I found in apache documentation that it is not supported. I ask here because the docs can be old and in the newer version that could be possible.
I use apache vesrion 2.2 and this is waht I want to make:
1. configure my domain name to use http protocol
2. configure subdomain.domain to use https protocol
For now I can start https only in the domain and subdomain but can't do that separately.
View 4 Replies
ADVERTISEMENT
Apr 12, 2011
I have a CentOS 5.5 Server and I'm hosting 3 different Name-based Virtual Hosts. Using Joomla 1.5 for the site. Each VHost has it's own subdirectory under /var/www so I have .var/www/vhost1, /var/www/vhost2 etc.
The Code in my httpd.conf for each vhost is : -
# Virtual host vhost1.site.com
<VirtualHost 192.168.0.203:80>
DocumentRoot /var/www/vhost1
ServerName vhost1.site.com
ServerPath vhost1/
[Code]...
It works perfectly, but I'm getting a lot of unwelcome spiders and bad bots trawling for MP3 files because there are a few MP3 files on one the sites. I've added all the Bad Bots to my .htaccess file and now I need to know if I should make only ONE .htaccess and put it under /var/www OR create a different .htaccess file for each vhost (this would be an ideal solution, but I'm not sure if it can be done).
View 2 Replies
View Related
Jan 10, 2011
I've been trying to get my name-based server to work for a week now. I've read about everything there is and double checked my configs, but when I go to any of my sites, it always goes to the first virtual host.Here is my Webmin system info -Quote:
System hostnamelocalhost.localdomain
Operating systemRedhat Linux Fedora 11
Webmin version1.530
[code]...
View 6 Replies
View Related
Jul 22, 2010
I am having two domains. for ex: www.example1.com and www.example2.com. These two domains need to be hosted under one ip. Yes by configuring name based virtual host we can do that. But, my question is my first domain(www.example1.com) need to be hosted by Apache web server, and my second domain(www.example2.com) need to be hosted by Tomact. Is it possible to configure name based virtual host for a scenario like this.
View 6 Replies
View Related
Feb 15, 2011
I have set up a SSL site for my default Apache server. But I want to set up multiple SSL sites for multiple IP based as well as Name based Virtual hosts. Is there a way where in I can include definitions for SSL certificates and keys within the Virtual Host directive in the httpd.conf, so that I can specify separate key and cert file for every Virtual Host.
View 11 Replies
View Related
Sep 29, 2009
1) My Internet connection is COMCAST with a router box and one public IP address.2) My web server is Apache using 10.1.10.200 as its address.3) Now I want to add another host name (www.myhealth.com) on my server. I did DNS forwardin (with Godaddy) to my COMCAST static IP address.4) I also added (in my httpd.conf) a block for virtual hosting
View 4 Replies
View Related
Feb 20, 2011
Are there any open source Virtual Machines which have web based administration. I am setting up Ubuntu 10.4 x64 and would really like to find a usable virtual machine manager. I really like Virtualbox but only the full version has web based administration. I have also tried VMware but it isn't open source.
View 9 Replies
View Related
Jan 9, 2011
Im trying to install a trading program fx trading station II on a dedicated virtual server that's linux based at media temple. Any ideas on how to run the program so that the exe file isn't prompting to download the file instead of prompting the user to login and trade?
View 2 Replies
View Related
Aug 18, 2011
I have designed name based virtual hosting in apache. as of now,I am able to access website using IP also. which is I am looking to block, only can access by the name
View 7 Replies
View Related
Aug 17, 2011
how do i able to allow some users that are able to create content in directory of http server. For example: i have configured a web server which have default document root /var/www/html, now i want to extend my web server through virtual hosting , i have enable virtual hosting, but i want that user sumit is able to create content in /var/www/html/secret. which is the document root for my virtual site?
View 5 Replies
View Related
Jun 5, 2011
In the past I found some great help on this forum, so here goes. Bare with me because it's a long story. I'll try to be as complete as possible. I've installed and configured OpenLdap on a virtual machine with ip 192.168.39.134. I've added 2 users via LAM. In the ou WikiUsers and the domain is wiki.local.
I've then created another host with ip 192.168.39.133 with mediawiki installed on it. Then I added the extension LDAPAuthenthication. In the LdapAuthentication file I added this code (only the last paragraph is mine, I added the others to show it's location in the script):
Quote:
$path = array( $IP, "$IP/includes", "$IP/languages" );
set_include_path( implode( PATH_SEPARATOR, $path ) . PATH_SEPARATOR . get_include_path() );
[code]...
I know I'm close because I can't register any new users or accounts on the mediawiki site. Although I could before I added the LDAP service. This is indeed all just to test and get to know how LDAP works. That's why it's all virtual in VMWare. I did not really configure anything on the LDAP, i just installed it and chose a domain (wiki.local).
View 5 Replies
View Related
Dec 29, 2010
I am trying to install either Ubuntu or CentOS server in text mode only. The problem I am having is that the hardware that I am trying to install it on has no vga output, I can only connect to it via console cable. I am able to boot from USB CDROm or flash drive but unfortunately since the hardware does not have a gpu (atleast none that I'm aware of) I am unable to get past the boot screen. If someone can point me in the right direction or know where I would be able to download the text install of either OS, that would be awesome.
View 11 Replies
View Related
Apr 7, 2011
Im not able to find good response on this from google, urgent help required.
While im looking at my smtp server log at /var/log/maillog, im having these two errors for which im unable to find the reason.
1)Could not open inline file /etc/MailScanner/reports/en/inline.sig.txt, No such file or directory
2)did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA
View 1 Replies
View Related
May 18, 2010
we need to log web access of a certain set of users for analysis. We decided to setup a proxy server which just logs all the requests but does not do anything else like caching/access control etc.All users will be using a fixed set of computers and hence we can redirect their requests to the proxy. I came across Squid, but found it to be too heavy for our requirements. Is there any other proxy-server software that is good enough for what we want or is Squid the only way?
View 1 Replies
View Related
Jun 9, 2010
What is difference between Ip based server and Namebase Server in (Linux)?
View 4 Replies
View Related
Mar 22, 2009
I am trying to set up a web based FTP site on my home server, I got ftp up and running and I can log into it using an ftp client but I want to set it up so I can get to it from the web. I put the directory in the www/html folder but that does not seem to help it
If anyone could point me in the right direction that would be great. I also need to let anonymous users get access to it.
View 2 Replies
View Related
Jul 19, 2009
Just something that struck me while working on our virtual servers today.
I have bonded 3 NICs at the host in Ubuntu Server 8.04 LTS. They are using mode 0 for Round-robin. Point is to increase the speed/performance of all the servers, but mainly the fileserver. The fileserver is a virtual server running Ubuntu Server 8.04 LTS on VMware Server 2.0.
1) I noticed the NIC in the slave OS reported link speed as 1000 and Im unable to change it as the NIC (virtual one) doesnt support it. Does this not really matter, as the NIC doesnt exist, and it will run at higher speeds anyway? Or do I have to remove the bond on the host, bridge all 3 interfaces from the host to the slave OS, and then make a bond in the slave OS?
2) While at it, does mode 0 only increase performance on data being sent from the host or does it also increase the available incoming bandwidth?
View 1 Replies
View Related
Apr 17, 2010
I installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.
I have made the following additions to the /etc/httpd/conf/httpd.conf file
Code:
In addition to this, I have added this to my /etc/hosts file
Code:
I wanted to test the Apache server on my laptop only by putting an html file in /var/www/html and naming it as index.html. I want this index.html page to be displayed when I put www.chaalu-kam.com in my browser. What should I do? My firewall is off too
View 10 Replies
View Related
Jul 3, 2009
apache virtual host to limit the concurrent connections of virtual hosts? Taking into account the host of each virtual user's home directory can also have more than one subdirectory, which should be restricted to a subdirectory. Is beyond the control of the operation of these sites in a subdirectory. Best local restrictions or limitations to the overall situation.
View 1 Replies
View Related
Apr 21, 2010
I'm having an issue with setting up the virtual hosts on my web server. I have 2 virtual hosts (example1.com, example2.com). example1.com works but example2.com is sent to the index file of example1.com. I did some searching on google and it seems the problem might be with my /etc/hosts file.
First virtual host that the second is also directed to...in sites-available/sites-enabled (note port 80 is blocked by my isp so I use 8080)
Code:
Second virtual host file
Code:
And my hosts file
Code:
# The following lines are desirable for IPv6 capable hosts
Also I'm using a dyndns.org...would that make a difference?
View 2 Replies
View Related
Nov 3, 2010
I just recently purchased a vs from a company and i am trying to set up a web site on it with kloxo and set up the mail for it upon setting up the mail settings it says:
"It is very essential that you set the my name to a properly resolvable hostname, since otherwise, many public mailservers like hotmail will reject mails from your server"
Now this is my first time setting up a vs before i have set up linux vm's to get email access but that was about a year ago.
View 6 Replies
View Related
Jul 18, 2010
i am using windows xp and i virtualy running centos 4 by using microsoft virtual server 2007. i need to install webmin in centos but i having rpm package in windows xp how i share the folder for linux. i dont know how to share a folder for virually installed centos in microsoft virtual pc 2007.
View 3 Replies
View Related
Dec 4, 2010
I've got a Joomla website made for me. It is hosted with a hosting company. Here and there i change some of its content, but i want to practice it locally on my computer before i do bigger things on the web, so that if things get into a serious problem it is close at hand to fix it up. I've installed apache2 php5-mysql libapache2-mod-php5 mysql-server on my Ubuntu 10.04 desktop. also, I've installed Joomla up and running.
My question is: how do i transport/copy my website from the web into my computer?
I know that I need to transfer the database, where do i put it in my local file system, and what additional commands are required for that?
I know that I need to transfer the public_html, where do i put it in my local file system, and what additional commands are required for that?
View 7 Replies
View Related
Jan 8, 2010
Is there anyway for one Virtual Server to access the main host, or another Virtual Server? Or would they be totally 100% independent?
View 5 Replies
View Related
Nov 22, 2010
I want to create a virtual host and virtual ip in proftpd linux centos. can anyone please help me on this,I'm new in linux.
View 8 Replies
View Related
Feb 6, 2010
We are trying to define an appliance based on Suse for an application server and Web server Apache, so we would like to know configuration best practices for network and security, is there any paper/doc about best practices?
View 3 Replies
View Related
Oct 14, 2010
I've got a working Virtual Postfix server running with mysql doing user authentication. I have a support email address set as support@hostname.com, which has 5 aliases associated; user1, user2, user3, user4, and user5. When an email is sent to support@hostname.com, all 5 users receive the email, just as planned. What I'm looking to do is when an email is sent to support@hostname.com to have it rotate through the members of the alias group. That way all members of the group get support emails evenly and not everybody all at once. Is this possible?
View 4 Replies
View Related
Jun 27, 2011
To host a web server in our company. We bought the new server which is containing 1000GB. we plan to host Human Resource Information System, Monitoring and evaluation system, and Intranet(web based).
I need to host a web server with virtualizaiton In case i need to extend the Size, i have the feature to extend size of virtualization. What are the setting i have to do mainly LVM in based OS how many GB i have to give ? in the virtualzation how many GB i need to allocate ? when i create the Virtual OS, it will take capacity from based OS or Unallocated space ?
View 7 Replies
View Related
Sep 8, 2010
I've been trying to install Ubuntu Server onto Microsoft Virtual Server at the request of my boss, and I've been having an issue I cannot seem to work around. Now my background on Ubuntu and linux in general isnt amazing, I have configured server at home to act as a file sharing platform and a media server, but thats about it.
Now I've gone to install it on the MVS at work and once the install completes, I recieve the following error: Hypervisor error.JPG
I've tried running the install but limiting the resolution, but from what I can rememeber server doesnt install the GUI to start with, so it should just be showing me the standard CLI.
View 1 Replies
View Related
Jan 27, 2011
I am not well versed in networks, I want to understand whether broadcasting is possible through a TCP based Server? If yes, then what are the complications? I searched Google and found this: [URL] It said
Quote:
The types of broadcasting uses on TCP/IP that I know about are:
1. ARP on IP
2. DHCP on IP
3. Routing table updates.
View 4 Replies
View Related
